HX-5 SERIES
COMPACT ARRAY
SPEAKER SYSTEM
New innovations in sound reinforcement.
15 degrees
30 degrees
45 degrees
60 degrees
HX Series
TOA,s new HX-5 Series Speaker
System fills an important need
for versatile public address
—
Full area coverage
equipment that can provide
high quality reinforcement for
a wide range of venues.
Available in black and white
finishes to complement a venue,s
interior color scheme, the HX-5 Series is
ideal for a wide range of medium size
venues of all different shapes that often
pose problems for sound reinforcement.
These include auditoriums, places of
worship, banquet halls, community centres
as well as dance halls, sports bars,
shopping malls, boardrooms, gyms, health
clubs and many others.
HX-5B /HX-5B-WP
Design background
The HX-5 is an innovative modular speaker design that
incorporates the best characteristics of the traditional,
cumbersome woofer enclosure combined with a CD
horn-loaded high frequency driver and the full-range
compact speaker enclosure without the drawbacks
associated with each type.
The traditional speaker system was able to provide
well-controlled sound coverage but posed various
difficulties for correct installation and also presented
an old-fashioned appearance as well that impacts on
the venue,s appearance. The full-range compact
speaker enclosure is easy to install, but the design,s
sound coverage is hard to control.
The HX-5 features remarkably easy to control
coverage characteristics including problematic low
frequencies and can be installed in a multitude of ways
while maintaining
a modern,
unobtrusive
appearance.
Directivity
changeable
speaker
Large-scale
CD horn
and wider bandwidth sound.
Adjustable sound dispersion
A system is configured by vertically stacking four
speaker modules with a total driver complement of four
woofers and 12 tweeters positioned along the baffle
surface. This configuration allows the variable directivity
control and low-frequency dispersion control
comparable to using a large constant-directivity horn
speaker. A choice of four directivity angles — 15, 30, 45
and 60 degrees can be employed as needed. For
Four Stages
Angle of beam spread
15°, 30°, 45°, 60°
When you arrange the plural
In multiple unit configurations, the HX-5 will be able to
deliver greater low frequency output over its angle of dispersion.
instance, a specific directivity angle, or each module can
have its directivity independently set for a specific
coverage requirement. When two or multiple modules
are connected to configure an arc, they effectively
function as an immense single speaker controlling
directivity for considerably lower frequencies. As a result,
public address functions demonstrate optimal
intelligibility even in environments with long reverb times.
800Hz –
400Hz –
Minimal reflective effects
Whether mounted on the wall or ceiling, the HX-5 is
remarkably free from the comb filter and interference
effects often encountered with other speaker designs.
It can therefore produce more low frequency output
even when mounted on the wall or ceiling.
CD hornHX-5
Versatile mounting options
Compared to many other speaker designs, the HX-5
Series is remarkably easy to install in several ways. It
can be hung easily with chains, strong wires and
cables using the accessory brackets. There are also
options for hanging with a pre-install frame by itself or
configured with a subwoofer. There are also other
options including ceiling and wall brackets as well as
an adapter for use with a dedicated stand.
HX-5W-WP/HX-5W
Transformer option
The HX-5 Series can also be used with a MT-200
matching transformer.
FB-120W
FB-120B
Subwoofer
SPECIFICATIONS
HX-5B HX-5W HX-5B-WP HX-5W-WP
Enclosure Bass-reflex type Sealed type
Power Handling Capacity Continuous pink noise: 200W, Continuous program: 600W
Rated Impedance 8Ω
Sensitivity (1W, 1m) 96dB (60° mode), 97dB (45° mode), 98dB (30° mode), 99dB (15° mode)*
Frequency Response 70 – 20,000Hz (–10dB) (60° mode), 75 – 20,000Hz (–10dB) (45° mode), 95 – 20,000Hz (–10dB) (60° mode), 100 – 20,000Hz (–10dB) (45° mode),
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2000Hz)
Speaker Component Low frequency: 12cm cone-type × 4
Input Terminal Speakon NL4MP × 2 and M4 screw terminal —
Speaker Cord — 2-core cabtyre cord with diameter of 6mm
Water Protection — IPX4 (Install with the every speaker module downward)
Operating Temperature — –15°C to +50°C
Finish Enclosure: Polypropylene, black Enclosure: Polypropylene, white Enclosure: Polypropylene, black Enclosure: Polypropylene, white
Dimensions 408 (W) × 546 (H) ×342 (D)mm
Weight 16kg
Accessory Hanging bracket × 2, Hex. wrench × 1
Option Matching transformer: MT-200 Matching transformer: MT-200 Matching transformer: MT-200 Matching transformer: MT-200
Power Handling Capacity Continuous pink noise: 200W, Continuous program: 600W
Impedance 8Ω
Sensitivity 90dB (1W, 1m) at installation in free sound field
Frequency Response 40 – 1,200Hz (–10dB)
Speaker Component 30cm cone-type
Input Terminal Speakon NL4MP × 2 and M4 screw terminal, distance between barriers:11mm
Finish Enclosure: Plywood Enclosure: Plywood
Dimensions 408 (W) × 408 (H) × 450 (D)mm
Weight 15kg
Option Speaker rigging frame: HY-PF1B Speaker rigging frame: HY-PF1W
80 – 20,000Hz (–10dB) (30° mode), 85 – 20,000Hz (–10dB) (15° mode) 105 – 20,000Hz (–10dB) (30° mode), 110 – 20,000Hz (–10dB) (15° mode)
Vertical: 60° (over 800Hz), 45° (over 1.2kHz), 30° (over 1.6kHz), 15° (over 3.2kHz) variable
High frequency: Balanced dome-type × 12
Speaker mounting bracket: HY-PF1B, Speaker mounting bracket: HY-PF1W, Speaker mounting bracket: HY-PF1WP, Speaker mounting bracket: HY-PF1WP,
HY-CW1B, HY-WM1B, HY-WM2B, HY-CW1W, HY-WM1W, HY-WM2W, HY-CW1B-WP, HY-WM1WP, HY-CW1W-WP, HY-WM1WP,
HY-CN1B HY-CN1W HY-WM2WP, HY-CN1W-WP HY-WM2WP, HY-CN1W-WP
Speaker stand adapter: HY-ST1 Speaker stand adapter: HY-ST1
* (Factory-preset: 60° mode)
FB-120B FB-120W
96dB (1W, 1m) at installation in 1/2 free sound field
Punched net: Steel plate, black, paint Punched net: Steel plate, white, paint
Optional Accessories
HY-PF1B
Rigging Frame
for indoor use
HY-PF1W
Rigging Frame
for indoor use
HY-PF1WP
Rigging Frame
for outdoor use
HY-CW1B
Ceiling Mounting Bracket
for indoor use
HY-CW1W
Ceiling Mounting Bracket
for indoor use
HY-CW1WP
Ceiling Mounting Bracket
for outdoor use
HY-WM1B
Mounting Bracket
for indoor use
HY-WM1W
Mounting Bracket
for indoor use
HY-WM1WP
Mounting Bracket
for outdoor use
HY-WM2B
Mounting Bracket
for indoor use
HY-WM2W
Mounting Bracket
for indoor use
HY-WM2WP
Mounting Bracket
for outdoor use
HY-CN1B/
HY-CN1W
Extension Bracket
for indoor use
HY-CN1B-WP/
HY-CN1W-WP
Extension Bracket
for outdoor use
HY-ST1
Speaker
Stand
Adapter
MT-200
Matching
Transformer
Human society with
Sound & Communication
TOA Corporation
www.toa.jp
Specifications are subject to change without notice.
Printed in Japan (0611) 833-52-329-1B u
Loading...