TOA MP-1216 US Users Manual

MULTI CHANNEL

OPERATING INSTRUCTIONS

MONITOR

TO A 1000 series

MP-1216

THE LIGHTNING FLASH WITH

ARROWHEAD WITHIN A TRIANGLE IS

INTENDED TO TELL THE USER THAT

CAUTION

TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER. NO

USER SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE
PERSONNEL.

Please follow the instructions in this manual to ob ta in th e o pt im um r esults from this unit.

We also recommend you to keep this manual handy for future reference.

PARTS INSIDE THE PRODUCT ARE A

RISK OF ELECTRIC SHOCK TO
PERSONS.

THE EXCLAMATION POINT WITHIN A
TRIANGLE IS INTENDED TO TELL THE
USER THAT IMPORTANT OPERATING

AND SERVICING INSTRUCTIONS ARE

IN THE PAPERS WITH THE APPLIANCE.

TOA Corporation

HANDLING PRECAUTIONS

The MP-1216's operatin g voltage is within 10% of your local power voltage (50/60 Hz).

Do not install the MP-1216 in locations which are subject to corrosive chemicals or salt water. Also, keep your
beverages away from the unit.

To avoid electric shocks, do not touch the unit's internal components. Always refer the servicing to your TOA

dealer.

FEATURES

The signal level meter allows simultaneous monitor of a maximum of 16 channels per unit.

Any of the high-impedance speaker line output, low-impedance speaker line output, and line level output can be
monitored by connecting it to the corresponding input.
One of the 16 channels can be monitored with an internal speaker or headphone.

By connecting two MP-1216 units, a maximum of 32 channels can be monitored.

NOMENCLATURE [Front Panel]

Headphone Jack (PHONES)

Use this jack for headphone-monitoring of the

channel selected with the channel selection

switch. No sound is output from the speaker

while this jack is used.

Speaker

Outputs the sound of the selected channel.

Level Meter (1~16)

Indicates the signal level of each channel.

Channel Indicator (1~16)

Indicates the current channel being monitored.

The 16th channel's indicator lights whenever the

power is switched ON.

Volume Control (OUTPUT)

Adjusts the sound volume of the speaker or
headphone.

Channel Selection Switch Indicator

Lights when the channel selection switch is
enabled, and is extinguished when the linkage

setting switch is set to SLAVE position.

Channel Selection Switch (CH SELECT)

Selects the channel to monitor.

Power Indicator

Lights when the power switch is set to ON, and
is extinguished when the switch is set to OFF.

Power Switch (POWER)

Press this switch to turn power ON. To turn

powe r OFF, press the switch again.