The TV is suitable for use on a.c. mains supply, 220-240V, 50 Hz only. It must not
be connected to d. c. mains.
NOTE : The mains lead of the TV is fitted with a moulded plug. If the mains sockets
are not compatible or if for any reason the plug is removed please follow these
directions :
The moulded plug cannot be rewired and if removed must be disposed of safely.
5A fuse
DO NOT under any circumstances plug the severed plug into any mains socket as
this could result in electric shock.
IMPORTANT : If the plug is removed rewire new plug as follows :
The wires in the mains plug are coloured in accordance with the following code :
BLUE - NEUTRAL
BROWN - LIVE
As the colours of the wires in the mains lead of this apparatus may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows :
BLUE wire to the terminal coded N (Neutral) or coloured black.
BROWN wire to the terminal coded L (Live) or coloured red.
DO NOT make any connection to the terminal in the plug which is marked by the
letter E or by the safety earth symbol or coloured green or green and yellow.
A fused plug must be fitted with a 5A fuse approved by ASTA or BSI to BS 1362
and fuse covers must always be securely replaced.
REMOTE BATTERIES
The remote control requires two batteries size AAA as supplied with the unit.
Unclip the cover at the rear and insert the batteries the correct way round as
shown. The ends are usually marked + and –. Replace the batteries when the unit
no longer operates at normal viewing distances.
For a clearer environment, please dispose of used batteries in the containers
provided for this purpose.
NOTE
When replacing batteries do not mix old and new - do not mix makes and types.
Alkaline types are recommended for long life. Never risk damage to the remote
control by extreme heat - do not leave close to a radiator or on a window ledge in
direct sunshine.
- 2 -
II
MENU
VT
TV
FUNC. VTSTOP
F 3003
123
456
789
0
/
AV
PROG.
THE REMOTE CONTROL
MENU
TV
II
VT
PROG.
FUNC. VTSTOP
MAIN MENU
PREF.
——:——
Program.
Organis.
TIMER MENU
to call up the menus :
———————————————————————————
Picture
A
Setting the clock
A
Manual channel setting
A
Re-organizing programmes
A
to select functions :
Stand-By (Sleep timer)
A
———————————————————————————————
Alarm
A
page 8
——————————————————————
———————————————
—————————————
———————————
page 10
10
12
7
11
The menus Program., Organis. and TIMER can be locked. If you cannot
display them, see page 18 on how to unlock them.
The first line of the menus is automatically selected. To select another line,
simply press the button again, to move down through the menus.
SOUND SELECTION
PICTURE SELECTION
PROGRAMME SELECTION
VOLUME LEVEL,
and adjustment or selection in menus.
INFORMATION DISPLAY,
(current channel, time, pre-sets)
and to leave menus.
SOUND MUTE
TELETEXT
and scroll up through the menus.
STAND-BY
(M 3673 GCT)
- 3 -
CONTENTS
PROG
VOL
-
+
-
+
Page
CONNECTIONS AND CONTROLS ..................... 4 - 5
TO TURN ON ............................................................ 4
On/Stand-By light : Green : On/Red : Stand-ByOn/off switch
Page
Programme
Volume
selection
TO TURN ON
Press the on/off switch; the indicator light comes on.
Press button 1 on the remote control.
If your television set has not been tuned in, you may now begin tuning the channels.
Proceed to selecting the menu language in the INSTALLATION MENU page 6.
- 4 -
AUTOMATIC CHANNEL SETTING
English press
Deutsch
Français
Français (Belgique, Suisse)
Italiano
Español
INSTAL. MENU
+
AUTO-PROGRAMMING
Searching for stations
UK
Stations found : XX
CCXX
MENU
FUNC. VT
To select a stationPR
—
/PR +
To give a prog. no. +
To erase this station
—
When completed : press
[ TV ]
PROGRAMME ORGANIZER
PR 01 CH22
To select a stationPR
—
/PR +
To give a prog. no. +
To erase this station
—
When completed : press
[ TV ]
PROGRAMME ORGANIZER
PR 01 CH22
Name : — — —
—
To store and continue
PROGRAMME ORGANIZER
PR 01 CH22
Program No : —
—
PROG.
STOP
FUNC. VT
FUNC. VTSTOP
This set is equipped with an automatic search system which will search and store all channels available in
your region. To help identify the programmes, we suggest that you have to hand a TV guide or daily
newspaper.
Ensure that the aerial lead is connected to the television and any VCR or SAT equipment that is connected
via the antenna is turned on but do not switch on if also/only connected to a Scart/AV input.
If your VCR is connected by RF cable and not by SCART and if you do not find the VCR output through
Autoprogramming, then go to Manual Channel Setting.
1. INSTALLATION MENU
When the television set is turned on for the first time,
the Installation menu appears automatically.
If this menu is not displayed, you can make it
appear as follows :
- Switch the television to Stand-By.
- Switch off the television by pressing the on/off switch and wait for the light to go out.
- Switch the set back on, whilst keeping the PROG —button on the television keypad
pressed down until the INSTALLATION MENU appears.
Press repeatedly the button to select the menu
language you require.
Press briefly, a new menu appears, automatic
search begins.The cursor will move from left to right.
Please wait until the following
menu appears.
2. PROGRAMME ORGANIZER MENU
This menu is used for :
• allocating programme numbers and name the
programmes auto tune has found (ie. BBC 1 in
Prog. 1, etc…).
• storing the changes made in memory.
• erasing a programme.
ERASING - STORING PROGRAMMES
Select the programme.
To erase :
keep pressed for some seconds until the station
disappears.
To store :
press briefly and a new menu will appear.
Select the number that you want to give
to the programme.
- 5 -
TV
PROGRAMME NAME
TV
MENU
FUNC. VT
MENU
PROG.
PROG.
FUNC. VT
FUNC. VTSTOP
Press briefly to move to the Name line.
Press briefly. The first dash flashes.
Hold down (PROG +) : the characters are displayed in ascending order.
Hold down (PROG
—
): the characters are displayed in descending order.
When the character you are looking for is displayed, move on to the next ( + ), or
preceding dash ( —).
To insert a space, use the empty character (between ß and A).
TO STORE IN MEMORY
Press briefly to select the Store line.
Press briefly to store your changes in memory, the + turns to OK.
The PROGRAMME ORGANIZER menu then reappears.
Repeat the above procedure to change other programmes.
Press briefly to clear the menu from the screen.
NEW CHANNELS
If a channel is not found or a new channel starts to broadcast in your region please
refer to MANUAL CHANNEL SETTING.
NEW REGION
(If you move to another region, or you want to start again for any other reason)
Start the automatic search again and reorganise the programmes. To do this, call up the
INSTALLATION menu and proceed as described earlier (page 6).
All programmes and names previously stored are then erased.
Press briefly to clear the menu from the screen.
- 6 -
MENU
MENU
MENU
FUNC. VT
FUNC. VT
FUNC. VT
PREF.
— —
: —
—
Program.
Organis.
+
MENU
TV
RE-ORGANIZING PROGRAMMES
Name : — — —
—
To store and continue
PROGRAMME ORGANIZER
PR 01 CH22
Program No : —
—
PROG.
STOP
FUNC. VTSTOP
To select a stationPR
—
/PR +
To give a prog. no. +
To erase this station
—
When completed : press
[ TV ]
PROGRAMME ORGANIZER
PR 01 CH22
If you subsequently wish to re-organize the order of your programmes please proceed as follows :
Press briefly to call up the main menu.
Press repeatedly until
the Organis. line is selected.
Press briefly and the PROGRAMME ORGANIZER
menu is displayed.
While the television is in any AV mode, (audio-visual), PROGRAMME ORGANIZER
menu cannot be displayed.
Select the programme.
To erase :
keep pressed for some seconds
until the station disappears.
To store :
press briefly and a new menu will appear.
Select the number that you want to give
to the programme.
Press repeatedly to select the Store line.
Press briefly to store your changes in memory, the + turns to OK.
The PROGRAMME ORGANIZER menu then reappears.
Repeat the above procedure to change other programmes.
Press briefly to clear the menu from the screen.
- 7 -
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.