DPL913VD
CD / mp3 Player
30
Press SOURCE on the main unit or DVD/CD on the remote
to select the DVD/CD input source.
Loading and playing an audio CD
1. Press OPEN/CLOSE on the front panel to open the disc
tray. Place the disc on the disc tray with the label side
facing up. Press OPEN/CLOSE again to close disc tray.
2. Press PLAY/PAUSE to start the playback if the disc does
not start automatically.
3. Press PLAY/PAUSE on the main unit or PAUSE on the
remote control to pause playback. Press PLAY/PAUSE again
on the main unit or PLAY on the remote to resume normal
playback.
mp3 recommendations
• Use .mp3 as the extension when converting
audio files into mp3 for saving onto CD-R(W) or
CD-ROM, e.g. Rocky08.mp3. Do not use any other
extension e.g. .doc, .pdf.
• Do not use the .mp3 extension for other text or
non-audio data files as this may result in serious
malfunction and harmful noise interference.
• Most commonly available CD creation software
can make files compatible for the system but do
not forget to finalize your disc after creation. This
set cannot read DirectCD recordings.
• In order to get audio CD quality, you need to
record your MP3 CD at 128 kbps. You can record
up to 256 kbps. The unit might not read the file
which is not recorded within this range.
• Do not combine CD Audio and mp3 tracks onto
a CD-R(W) or CD-ROM. The player will only
playback CD audio tracks from mixed CD formats.
• The file name of mp3 songs should not exceed
10 characters.
Note:
• If over 400 items (songs/folders) are on
the disc, only the first 400 songs can be
played.
• Resume function does not operate in mp3 mode.
Note:
If the CD is a mp3 CD, reading may take up
to 30 seconds. Try re-inserting the disc if it
is not detected after 30 seconds.
Note:
Be sure to remove the disc from the disc
compartment before moving or transporting the unit!
DPL907VD-EN CD_MP3 4/2/04 4:59 PM Page 2
REV
AUX 2
VCR
FWD
AUX 1
SAT - CABLE
PR
4. Press PREV on the main unit or PR- on the remote to
return to the previous track. Press NEXT on the main unit
or PR + on the remote to go to the next track.
5. Press STOP on the main unit or STOP on the remote control to end playback.
Quick scan
1. Press FWD or REV on the remote to scan through a track
quickly during playback. To change quick scan speed, press
FWD or REV repeatedly during scan.
2. Press PLAY/PAUSE on the main unit or PLAY on the
remote to resume normal playback.
CD / mp3 Player
EN
31
AV
Note:
When playback is interrupted, the location
at which it stopped will be memorized.
Playback will resume at the position it was
last stopped. Resume playback does not work with mp3
music.
DPL907VD-EN CD_MP3 4/2/04 4:59 PM Page 3
REV
AUX 2
VCR
FWD
AUX 1
SAT - CABLE
PR
AV
REV
FWD
REV
AUX 2
FWD
AUX 1
-
CD / mp3 Player
32
On- screen banner display for CD playback
General use
1. Press INFO on the remote control to hide and show
the on- screen banner. (Only audio CD banner)
2. Use LEFT / RIGHT to move the cursor on the banner. The
selected feature icon will be highlighted.
3. Press UP / DOWN to change setting of the selected feature.
Selecting a track
1. Refer to “General use” to open the track menu.
2. Enter a track number. Start any single-digit track number by a 0 (e.g. 9 = 09).
Playmode selection for CD
There are several options for this feature.
1. Standard – normal CD playback
2. Program – plays the programmed tracks (usable in stop
mode only)
3. Random – randomly plays all the tracks of that disc.
4. Disc Repeat – repeatedly plays the selected or currently
playing disc.
5. Track Repeat – plays one track over repeatedly.
6. Repeat A-B – repeatedly plays the selected time frame.
7. Intro scan – plays the initial 10 seconds of each song in
the disc.
Track
Bookmark
Playmodes
Time indicator
Note:
You must be in playback mode for track
selection.
DPL907VD-EN CD_MP3 4/2/04 4:59 PM Page 4
00:03:20
T:4
PLAY
SURROUND
EQ. LEVEL
SUBWOOFER
SURROUND
SURROUND
SUBWOOFER
SUBWOOFER
Loading...