THOMSON DPL4000 - annexe 1, Scenium DPL4000 Instruction Manual

Page 1
Connection described below is also applicable for any component having digital output (Cable, Satellite, MD, CDRW recorder, TV)
NOTE:
• By default, the unit is set to use the Analog input from the DVD player.
• To change input connection, follow step 4 to 5 as described below.
• If a COAXIAL cable is used to connect DVD to the receiver, follow steps 4 to 5 and select COAXIAL.
• S-Video connection provides better quality than composite connection.
DVD To A/V Receiver
Speaker
• Match the speaker to the correct terminal on the receiver (example: left speaker to left speaker terminal on receiver)
• Connect the red speaker wire to the “+” terminal (both speaker and receiver) and the black speaker wire to the “-” terminal.
NOTE:
The color of speaker wires may vary. Please refer to the wires instruction book for details.
For details, please refer to Instruction manual chapter “Connecting the Speakers” (Pg. 6)
Follow the illustration and instructions provided to hook up your speakers.
Speakers and Antenna
Audio/Video components
Follow the diagram to connect audio or video components.
Follow the diagram to connect your DVD player to receiver.
ANTENNA HOOK-UP
SPEAKER HOOK-UP
Cables
To help you identify the cables used in audio-video, illustrations are provided below for your easy reference.
NOTE: To receive Dolby Digital / DTS signal, either a coaxial or optical cable must be connected; and in step 5, you have to select coaxial or optical input accordingly.
Connect components capable of outputting digital signals like Dolby Digital (e.g. DVD player or Satellite/Cable Box) or standard PCM format digital signals (CD player). Read section on “Input Signal Setting” under “Advanced Sound Control” carefully to adjust the matching input settings.
RCA Audio cable
(Analog)
1 Piece
Composite Video
Cable (Usually yellow)
1Piece
S-Video cable
Not Included
Optical Cable (Digital)
Not Included
Coaxial Cable (75 / Digital)
Not Included
to COMPONENT
VIDEO INPUT (if available)
DVD
to VIDEO IN (TV)
to AUDIO OUT (TV)
to S-VIDEO IN (TV)
(if available)
to OPTICAL OUT (DVD)
to COMPONENT OUT(DVD) (if available)
to COAXIAL OUT
(DVD)
NOTE: Speakers and speaker cables are not provided.
1 Connect either the COAXIAL
or OPTICAL cable (not included)
2 Connect the RCA Audio cable. 3 Connect the video cable
(composite, s-video or component video)
4 Select DVD 5 Press DIGITAL INPUT repeatedly
to select the input being used (analog, coaxial, or optical) and release to validate.
5
4
to VIDEO IN (VCR)
to AUDIO IN (VCR)
to AUDIO OUT (VCR)
to VIDEO OUT
(VCR)
1
3
3
COAXIAL
OUT
OPTICAL
OUT
OUT
AUDIO
VIDEO
S-VIDEO
OUT
OUT
COMPONENT OUT
ON/ECO
PHONES
VIDEO S-VIDEO
AUDIORL
OPEN/CLOSE
BASS/TREBLE
VOLUME
LEVEL
MUTE
HOME THEATER AUDIO VIDEO RECEIVER DPL 4000
V-AUX
BAND TUNINGOKMEMORY SETUPTEST TONE EQ
DIGITAL INPUT
ST/M
SOURCE
SURR. MODE DSP MODE
Release tab to lock wire in the terminal.
NOTE: Make sure the insulation is completely removed from the ends of the wire at all connection points.
Antenna Wire Connection
Push terminal tab down to insert wire.
to AUDIO OUT (DVD)
S-video to S-video out (DVD)
to VIDEO OUT (DVD)
2
Page 2
Speaker Placement
1 Center Speaker:
Positioned on top or below the TV set.
2 Front Speaker:
Positioned on both sides of the TV with equal distances away from the TV.
3 Rear Speaker:
Positioned beside or slightly behind your favorite viewing position. The height should be a little above your ear level.
Subwoofer:
Can be positioned anywhere but preferrably near a wall in the front.
NOTE:
For effective SURROUND effect, rear speakers need to be located beside or behind your listening position.
Advanced Set Up: For more details on speaker placement, please refer to the manual chapter “Positioning Your Speaker”
For optimized performance, please follow the recommendations and illustration.
Left Rear Speaker (Surround)
Right Rear Speaker (Surround)
Left Front Speaker
Center
Right Front Speaker
Thomson multimedia
46/47 quai A. Le Gallo
92648 Boulogne Cedex
FRANCE
RCS nanterre
B 322 019 464
TOCOM 55526130 Rev.1 (EN)
This guide will help you to set up your system through several illustrations.
3
3
2
2
1
www.thomsonscenium.com
DPL4000
Quick Connect Guide
EN
Loading...