The Singing Machine SMM-112 Instruction Manual

SMM-112

Instruction Manual

PROFESSIONAL WIRELESS
MICROPHONE

Please read before using this unit.

1

Contents

1. Headset Wireless Microphone x 1

2. Microphone Receiver x 1

3. Microphone Transmitter x 1

Congratulations on your purchase of a Singing Machine Wireless
Microphone. We at the Singing Machine know that it will provide you and
your friends with endless hours of entertainment. Inside you will find
instructions on how to use and maintain this unit.

Microphone Transmitter Details

Settings

The switch on the transmitter of your Singing Machine Wireless
Microphone has three settings:

1. ON - The switch is set to ON position. The microphone will function. The
red indicator light is on. The transmitter will use battery power.

2. STANDBY - The switch is set to STANDBY position. The microphone will

not function. The red indicator light is on. The transmitter will
use battery power.

NOTE: The purpose of this setting is to maintain a connection between the

microphone and the receiver when moving around the area in
which it is being used.

3. OFF - The switch is set to OFF position. The microphone will not function.

The red indicator light is off. The transmitter will not use battery
power.

Important Note: When the microphone transmitter switch is set to OFF,
noise may be generated from the karaoke machine. Please make sure to
reduce both the MASTER VOLUME and MIC VOLUME to the low level OR
switch off the receiver before turning off your microphone.

1 2 3

2

Instructions for Use

1. Insert one (1) active DC 9-Volt battery into the slot located at the

bottom of the transmitter.

2. Insert one (1) active DC 9-Volt battery into the slot located in the back

of the receiver.

3. Plug the 3.5mm microphone cord into the transmitter input jack.

4. Hold the transmitter on the belt by attached clip.

5. Properly wear the wireless headset microphone and adjust the mic

head by its flexible cord to appropriate position.

6. Set the switch on the transmitter to the STANDBY position.

7. Plug the receiver into the Microphone Input Jack of your Singing

Machine karaoke machine.

8. Set the switch on your Singing Machine karaoke machine to the ON

position.

9. Adjust the Master Volume and Mic Volume Controls of your Singing

Machine to a comfortable level.

10. Set the switch on the receiver to the ON position.

11. Set the switch on the transmitter to the ON position.

Your Singing Machine Wireless Microphone is now ready for use!

Maintenance

! To ensure long battery life, please make sure that both the Receiver and

the Transmitter are set to the OFF position when not in use. To be
absolutely certain, we advise you to remove the 9-Volt batteries from
both the Receiver and the Transmitter when they are not in use.

! Please remove the Receiver from the Microphone Input Jack of your

Singing Machine karaoke machine when not in use. This will reduce the
possibility of damage to the Receiver.

Æ