MODELS SHOWN: HPCB48NS 48-INCH PROFESSIONAL SERIES CHIMNEY WALL HOOD AND PRD486JDGU 48-INCH PROFESSIONAL SERIES
PRO GRAND® DUAL-FUEL RANGE
202
Page 2
VENTILATION
PROFESSIONAL
VENTILATION
®
& MASTERPIECE
SERIES
No need to worry about lingering odors or smoke with our elegant, powerful ventilation
systems, featuring design accents that complement our Professional Series or our Masterpiece®
Collection. These sophisticated ventilation systems remove smoke, grease and unhealthy
airborne contaminants. From standard wall to specialty hoods, downdrafts, island and
custom inserts, each model has one thing in common: legendary Thermador performance.
These powerful, quiet systems tackle unwanted smoke, grease, heat and odors—quietly and
efciently—with ventilation power ranging from 600 to 1,300 CFM.
1.800.735.4328 | THERMADOR.COM
203
Page 3
WALL HOODS
CHIMNEY WALL HOODS
• Create a bold, modern statement with a
distinctive stainless steel wall hood
• Deep enclosure area for excellent capture
• Recirculation option at 600 CFM for
Masterpiece® Collection
• A chimney design offers a more
contemporary feel
• Adjustable chimney heights suit a range
of ceilings
204
ISLAND HOODS
• Island hoods oat in the kitchen, creating a dramatic focal point
• Slim and sleek design that does not obstruct the views beyond your kitchen
• All stainless steel or stainless steel with elegant glass canopy design
Page 4
CUSTOM INSERTS
VENTILATION
• Create a seamless design that blends with your cabinetry
• Available options for all types of cooking surfaces
• User-friendly ventilation controls or remote control options
• Wall or island applications
1.800.735.4328 | THERMADOR.COM
DOWNDRAFTS
• The only hood that retreats out of sight for a sleek look with unobstructed kitchen views
• Over 13-inch intake
• Ideal in island applications
• 600 CFM recirculation kit option with integrated blower is available for difcult-to-duct situations
205
Page 5
RANGE, RANGETOP AND VENTILATION SELECTION GUIDE
PROFESSIONAL SERIES
= PERFECT FIT = VIABLE OPTION
27-INCH DEPTH, 18-INCH TALL
WALL HOODS
24-INCH DEPTH, 18-INCH TALL
WALL HOODS
36" PH36GS
42" PH42GS
48" PH48GS
54" PH54GS
60" PH60GS
30" PH30HS
36" PH36HS
48" PH48HS
36-INCH
PRO GRAND
®
48-INCH
PRO GRAND
27-INCH DEPTH24-INCH DEPTH24-INCH DEPTH
60-INCH
PRO GRAND
24-INCH DEPTH, 11-INCH TALL
WALL HOODS
24-INCH DEPTH CHIMNEY
WALL HOODS
ISLAND HOODS
CUSTOM INSERTS
30" HPWB30FS
36" HPWB36FS
48" HPWB48FS
36" HPCN36NS / HPCB36NS
48" HPCN48NS / HPCB48NS
42" HPIN42HS
48" HPIN48HS
36" VCIN36JP / 36" VCIB36JP
48" VCIN48JP / 48" VCIB48JP
54" VCIN54JP / 54" VCIB54JP
206
60" VCIN60RP
For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.
Page 6
RANGE, RANGETOP AND VENTILATION SELECTION GUIDE
PROFESSIONAL SERIES
VENTILATION | PROFESSIONAL SERIES SELECTION GUIDE
30-INCH
PRO HARMONY
36-INCH
PRO HARMONY
48-INCH
PRO HARMONY
30-INCH
RANGETOP
36-INCH
RANGETOP
48-INCH
RANGETOP
1.800.735.4328 | THERMADOR.COM
207
Page 7
COOKTOP AND VENTILATION SELECTION GUIDE
MASTERPIECE® SERIES
36-INCH
= PERFECT FIT = VIABLE OPTION
30" HMWN30FS
30-INCH
INDUCTION
INDUCTION/ FREEDOM®
INDUCTION
GAS COOKTOP
30-INCH
36-INCH
GAS COOKTOP
WALL HOODS
WALL HOODS
WITH BLOWER
CHIMNEY WALL HOODS
CHIMNEY WALL HOODS
WITH BLOWER
ISLAND HOODS
WITH BLOWER
48" HMWN48FS
30" HMWB30FS
36" HMWB36FS
36" HMCN36FS
42" HMCN42FS
36" HMCB36FS
42" HMCB42FS
40" HMIB40HS
42" HPIB42HS
48" HPIB48HS*
DRAWER HOOD
WITH BLOWER
CUSTOM INSERTS
DOWNDRAFTS
For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.
*Compatible with cooktops of widths up to 42" †Also compatible with Pro Grand Ranges, Pro Harmony Ranges and Professional Rangetops.
208
36" HDDW36FS
30" VCI230DS
36" VCI236DS
48" VCI248DS
30" UCVM30FS
36" UCVM36FS
†
†
†
Page 8
COOKTOP AND VENTILATION SELECTION GUIDE
MASTERPIECE® SERIES
VENTILATION | MASTERPIECE
30-INCH
ELECTRIC COOKTOP
30-INCH SENSOR
ELECTRIC COOKTOP
36-INCH
ELECTRIC COOKTOP
36-INCH SENSOR
ELECTRIC COOKTOP
®
SERIES SELECTION GUIDE
1.800.735.4328 | THERMADOR.COM
209
Page 9
VENTILATION
PLANNING INFORMATION
INSTALLATION CONSIDERATIONS
HOOD WIDTH
The hood width should be no less than the width of the cooking
surface. Where space is not restricted, a wider hood can be used to
increase your capture area.
DISTANCE FROM COOKING SURFACE
Proper mounting height is very important. If a hood is mounted
too low, it may be difcult to cook and be unsafe. If a hood is
mounted too high, performance may be compromised. For optimal
performance, the distance from the cooking surface to the bottom of
the hood should be a minimum of 30", unless otherwise noted. Please
refer to the installation manual for each hood and cooktop / range
model for proper hood mounting heights.
AVAILABLE CEILING HEIGHT
The standard ceiling height can vary from region to region and in
homes built in different eras. Ceiling heights, even in the same room,
can sometimes vary by as much as several inches. Kitchen ceiling
heights can vary between 7'6" (or 90") to over 10' (or 120").
Before selecting a Thermador Hood, check the available installation
space and any extra space that may remain after proper installation
of a hood and cooktop or range. This extra space can be lled using
Thermador stainless steel duct cover accessories or integrated with
kitchen cabinetry. The space can also be adjusted by raising or
lowering your hood within the recommended range (typically 30" to
36" above the cooking surface).
CHOOSING THE RIGHT CFM
The power of the cooktop or range, measured in BTU, is perhaps the
most important factor in determining CFM needs for a hood.
You should also consider the cooking space and cooking style of your
client.
• More demanding cooks usually require more exhaust capacity to
handle moisture generated by boiling large pots of water or the
grease and smoke resulting from grilling or frying. This cooking style
could require a hood or downdraft system with airow of 600 to
1,300 CFM.
• For those who are used to preparing quick meals in a relatively small
kitchen, a hood with 600 CFM may be adequate ventilation for the
cooking space.
• If the cooking surface is in a peninsula or island, a larger capacity
hood can provide better capture when there are cross currents and
when the hood needs to be mounted higher. Downdraft ventilation
systems are also a good alternative.
• High heat cooking or aromatic foods may require additional CFM.
Increasing capture area by 3" on each side is also a recommended
way to address this issue.
LENGTH AND SIZE OF DUCTWORK
Do not use exible duct; it creates back pressure / air turbulence and
reduces performance.
Straight runs and gradual turns are best. Use the shortest route with
the fewest turns possible.
CHOOSING THE CORRECT BLOWER
A variety of interior and exterior blower options (Remote, Inline
or Integrated) are available for Thermador Professional and
Masterpiece® Series Hoods. If the unit you have selected does not
have a blower, one can be purchased separately. Blower selection
will vary based on the volume of air that needs to be moved and the
length and location of the duct run. For long duct runs with multiple
turns and bends, consider using a more powerful blower. For the
most efcient air ow exhaust, use a straight run or as few elbows
as possible.
Remote Blowers (VTR Series)
Depending on your preference and ducting situation, these blowers
can be mounted on the roof or exterior wall of your home. An exterior
installation may be more appealing to reduce noise in the kitchen.
Inline Blowers (VTI series)
To minimize noise in the kitchen, these blowers are mounted along
the duct line anywhere between the kitchen and the exterior wall. If
you have easy access to your duct line (in an attic, for example), this
may be an appealing option.
Integrated Blowers (VTN series)
These blowers are purchased separately and integrated into the hood
or onto the downdraft unit at the time of installation. This option
allows you to select your ideal hood with the exact power you require.
Integrated blowers are included with HPWB30FS, HPWB36FS and
HPWB48FS.
SPECIAL NOTE: Always allow access to the blower for serviceability,
should it be needed.
Proper performance is dependent upon proper ducting. Use a
qualied and trained installer. Local building codes may require the
use of make-up air systems when using ducted ventilation systems
greater than specied CFM of air movement. The specied CFM
varies from locale to locale. Consult your HVAC professional for
specic requirements in your area.
If using a 10" duct, Thermador recommends not exceeding 50 feet
of duct. Transitions, elbows and wall or roof caps are all factors that
will add more static pressure, therefore increasing your equivalent
duct run.
- 25 ft. Blower Connector Cable for use with the
following Inline and Remote blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P*
* Cannot be used with HMCN36F, HMCN42FS,
HMWN30FS or HMWN48FS
ROOF JACK & TRANSITION
ROOF JACK – RJ310
– 3 1/4" x 10"
WC8
– 8" wall cap
WC310
– 3 1/4" x 10" wall cap
218
Page 18
EQUIVALENT DUCT LENGTHS FOR COMMONLY USED TRANSITIONS
PLANNING INFORMATION
VENTILATION | PLANNING INFORMATION
DUCT PIECE
Smooth Straight
3 1/4" x 10"
Straight
3 1/4" x 14"
Straight
90° Elbow Round
45° Elbow Round
SIZE
OF DUCT
PIECE (IN.)
61.2
70.95
80.7
100.6
N/A1
N/A0.7
612
78
86
65
74
83
EQUIVALENT
LENGTH (FT.)
DUCT PIECE
3 1/4" x 10" to
Round 90° Elbow
3 1/4" x 10"
Center Reverse
Elbow Left
3 1/4" x 10"
Center Reverse
Elbow Right
3 1/4" x 10" Left
Reverse Elbow
3 1/4" x 10"
Right Reverse
Elbow
Round Wall Cap
SIZE
OF DUCT
PIECE (IN.)
610
75
N/A15
N/A25
N/A15
N/A25
62
72
82
102
EQUIVALENT
LENGTH (FT.)
3 1/4" x 10"
90° Elbow Round
3 1/4" x 10"
45° Elbow Round
3 1/4" x 10"
Flat Elbow
Round to
3 1/4" x 10"
3 1/4" x 10"
to Round
Round to
3 1/4" x 10"
90° Elbow
N/A5
N/A15
N/A20
61
71
65
73
610
78
62
Round Roof Cap
2' Long
3 1/4" x 10" Flex
3 1/4" x 10"
to Round
7" Inline
Backdraft Damper
3 1/4" x 10" Roof
Jack and Shutter
NOTE: These commonly used installation parts can be purchased at a
local hardware store. Thermador does not manufacture all these parts.
72
82
N/A20
101
7
N/A
1.800.735.4328 | THERMADOR.COM
219
Page 19
WALL HOODS
OPTIONAL ACCESSORIES
KEEP-HOT SHELF
– For use with PH__GS and PH__HS
– Stainless steel nish
– Convenient shelf allows dishes to keep hot at serving temperature
– Includes stainless steel backguard and two shelves
KHS30QS
30" WIDE
KHS36QS
36" WIDE
220
KHS42QS
42" WIDE
KHS48QS
48" WIDE
Page 20
WALL HOODS
OPTIONAL ACCESSORIES
VENTILATION | OPTIONAL ACCESSORIES
STAINLESS STEEL BACKSPLASH
– For use with all Thermador® Wall Hoods
PA30JBS
30" WIDE
29(760 mm)
PA36JBS
36" WIDE
DUCT COVER
– For use with PH__GS,
PH__HS, HPWB__FS,
HMWN__FS and
HMWB__FS
– Stainless steel duct
cover for wall hood
applications
WIDTH6-INCH HIGH 12-INCH HIGH
30-InchDC30USDCT30US
36-InchDC36USDCT36US
42-InchN/ADCT42US
48-InchDC48USDCT48US
RECIRCULATION KIT
– For use with HPWB30FS, HMWN30FS,
and HMWB__FS
– Stainless steel nish
– Perfect for hard to duct installations
– Use with 600 CFM blowers only
PA48JBS
48" WIDE
RECIRC30FS
30" WIDE
RECIRC36FS
36" WIDE
1.800.735.4328 | THERMADOR.COM
REPLACEMENT CHARCOAL FILTERS
CHFILT3036
– For use with Recirculation Kit RECIRC_FS
221
Page 21
CHIMNEY WALL HOODS
20
7/
8
"
(531 mm)
14
1/
16
"
(356 mm)
6"
(152 mm)
20
7/
8
"
(531 mm)
14
1/
16
"
(356 mm)
12"
(305 mm)
20
7/
8
"
(531 mm)
14
1/
16
"
(356 mm)
18"-35"
(457 mm-
889 mm)
32
7/
8
"
(836 mm)
14
1/
16
"
(356 mm)
6"
(152 mm)
32
7/
8
"
(836 mm)
14
1/
16
"
(356 mm)
12"
(305 mm)
32
7/
8
"
(836 mm)
14
1/
16
"
(356 mm)
18"-35"
(457 mm-
889 mm)
OPTIONAL ACCESSORIES
36-INCH DUCT COVER
– For use with HPCN__NS / HPCB__NS
– Stainless Steel Duct Covers in three
different congurations
CHMHP366N
6" HIGH
CHMHP3612N
12" HIGH
48-INCH DUCT COVER
– For use with HPCN__NS / HPCB__NS
– Stainless Steel Duct Covers in three
different congurations
CHMHP486N
6" HIGH
CHMHP4812N
12" HIGH
CHMHP36TSN
18" – 35" HIGH
CHIMNEY EXTENSION
– Stainless steel chimney hood extension for up to 11-foot ceiling applications
– Extension replaces upper section of standard chimney extension
– May require fabrication to reduce height
CHIMXHMC
– For use with HMCN__FS
and HMCB__FS
CHIMXHDD
– For use with
HDDW36FS
CHMHP48TSN
18" – 35" HIGH
222
Page 22
ISLAND HOODS
OPTIONAL ACCESSORIES
VENTILATION | OPTIONAL ACCESSORIES
RECIRCULATION KIT
RECIRISL
– For use with HPIB__HS and
HMIB40HS
– Stainless steel nish
– Perfect for hard to duct
installations
– Use with 600 CFM blowers only
RECIRCULATION KIT
RECIRC36DF
– Comes complete with 2 charcoal lters, 2 venting grids, and ducting
to transition to integrated blower (blower sold separately)
– For toekick heights of 4" or taller
– Wall or island applications
– Easily mounts to integrated blower (VTN600CV2C) under cooktop
– Toekick / socket can be vented in any direction
– Mounts to base of cabinet; recesses into toekick
– To be used only with Thermador Downdraft and Integrated Blower
– Replacement lters are ordered as a service item
– Filters should be replaced twice a year
REPLACEMENT
CHARCOAL FILTERS
CHFILISL
– For use with Recirculation
Kit RECIRISL
DOWNDRAFT
OPTIONAL ACCESSORIES
REPLACEMENT CHARCOAL FILTERS
– Sold separately as service item #291108
(For use with recirculation module)
TRANSITIONS
CV2T6
– Transition piece required for installation of 600 CFM
Inline and Remote Blowers with 6" duct connections —
downdraft applications only
14 3/8"
6 3/4"
15 1/8"
Ø 6"
CV2T10
– Transition piece required for installation of 1000 CFM
Inline and Remote Blowers with 10" duct connections downdraft applications only
14 3/8"
14
7
/16"
Ø 10"
11"
1.800.735.4328 | THERMADOR.COM
223
Page 23
CUSTOM INSERTS
OPTIONAL ACCESSORIES
CUSTOM HOOD LINER
LINER236 – For 36-Inch Insert VCIN36JP
LINER248 – For 48-Inch Insert VCIN48JP
LINER254 – For 54-Inch Insert VCIN54JP
– For use with VCIN__JP
– Stainless steel custom hood liners to protect
the exterior base of custom insert
LINER236
LINER248
CUSTOM HOOD LINER
LINER30 – For 30-Inch Insert VCI230DS
LINER36 – For 36-Inch Insert VCI236DS
LINER48 – For 48-Inch Insert VCI248DS
– For use with VCI2__DS
– Stainless steel custom hood liners to protect
the exterior base of custom insert
LINER30
LINER36
LINER254
CUSTOM HOOD INSTALLATION TRIM
TRIMS236 – For 36-Inch Inserts
TRIMS248 – For 48-Inch Inserts
TRIMS254 – For 54-Inch Inserts
– For use with VCIB__JP series
– Stainless steel custom insert hood trims prevent heat and moisture build up inside the canopy
– Custom hood trim completes custom insert installation without using a liner
– Wipes clean easily
224
LINER48
Page 24
CUSTOM INSERTS
OPTIONAL ACCESSORIES
VENTILATION | OPTIONAL ACCESSORIES
REMOTE CONTROL PANEL
VCI2REMKS
– For use with VCIN__JP and VCIB__JP
– Stainless steel nish
– Cable-connected to blower and
hood controls (operation of
controls only from remote)
– Cable length 30 ft.
5
1
/16
7
/16
8
VCI2REMFS
– For use with VCI2__DS
– Stainless steel nish
– Cable-connected to blower and
hood controls (operation of
controls only from remote)
– Cable length 13 ft.
332
BAFFLE FILTER
BAFFLT30 – 30-Inch wide
BAFFLT36 – 36-Inch wide
BAFFLT48 – 48-Inch wide
– For use with VCI2__DS
– Stainless steel nish
– Unique low prole design maximizes grease capture
– Dishwasher-safe for easy cleanup
226MODELS SHOWN: PH48HS WALL HOOD AND PRG486GDH PRO HARMONY RANGE AND PA12CVRJ GRIDDLE COVER ACCESSORY
Page 26
WALL HOODS
VENTILATION
Thermador® Wall Hoods put the nishing
touch on your cooking system, with deep
capture areas for the best overall efciency
in drawing away smoke, moisture and heat.
These elegant hoods combine style with
vigorous performance, generating ventilation
power from 600 to 1,300 CFM. Available
in a variety of heights, widths and depths,
they accommodate your individual venting
needs. All models include brilliant halogen
lighting for enhanced visibility and convenient
speed controls. For ultra-simple cleanup, the
removable lters and grease collection trays
t easily in your dishwasher.
POWERFUL VENTILATION
Breathe deeply with the air-freshening power of up
to 1,300 CFM. Several models now have the blower
included for ease of installation.
VENTILATION – WALL HOODS | FEATURES & BENEFITS
EXTERIOR CONTROLS
Easy-to-clean, easy-to-use push-button controls put
accuracy at your ngertips.
DELAYED SHUT-OFF
For the greatest efciency, our Professional
ventilation models include delayed shut-off to
tackle lingering odors. (Except HMWB30FS,
HMWB36FS)
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: all Thermador ventilation lters are
dishwasher-safe, and many hoods feature a builtin Time-to-Clean-Filter reminder light. (Except
HMWB30FS, HMWB36FS)
KEEP-HOT SHELF
Hold dishes at serving temperature on our optional
Keep-Hot Shelf.
BAFFLE FILTERS
Unique low-prole, commercial-style bafe lters
maximize grease capture without affecting ow, and
they’re dishwasher-safe for easy cleanup.
1.800.735.4328 | THERMADOR.COM
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
227
Page 27
PH36GS
27-INCH DEPTH WALL HOOD (36-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of Lights2
42-inch model PH42GS shown.
36-inch mod el PH36GS f eatures 2 light s.
FEATURES & BENEFITS
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Powerfully Quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- 27" depth hood is a perfect companion to the Pro Grand
Professional Range
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
36" W Keep-Hot ShelfKHS36QS
36" W, 6" H Stainless Steel Duct CoverDC36US
36" W, 12" H Stainless Steel Duct CoverDCT36US
36" W Stainless Steel BacksplashPA36JBS
Roof Jack and TransitionRJ310
10" Wall CapWC10
See page 220-221 for accessories.
Bulb Type40 W - G9 Base
Total Power Of The Lamps (W)80 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style Bafe
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15; 20 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) Back10"
Net Weight (lbs)80 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Steel
120 V
60 HZ
120V-3 Prong
18" x 35 15/16" x 27"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
228
Page 28
PH42GS
27-INCH DEPTH WALL HOOD (42-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of Lights4
Bulb Type40 W - G9 Base
Total Power Of The Lamps (W)160 W
Damper IncludedYes
FEATURES & BENEFITS
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Powerfully Quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- 27" depth hood is a perfect companion to the Pro Grand
Professional Range
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
42" W Keep-Hot ShelfKHS42QS
42" W, 12" H Stainless Steel Duct CoverDCT42US
Roof Jack and TransitionRJ310
10" Wall CapWC10
See page 220-221 for accessories.
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style Bafe
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15; 20 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) Back10"
Net Weight (lbs)85 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Steel
120 V
60 HZ
120V-3 Prong
18" x 41 15/16" x 27"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
VENTILATION – WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
229
Page 29
PH48GS
27-INCH DEPTH WALL HOOD (48-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of Lights4
42-inch model PH42GS shown
FEATURES & BENEFITS
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Powerfully Quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- 27" depth hood is a perfect companion to the Pro Grand
Professional Range
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
48" W Keep-Hot ShelfKHS48QS
48" W, 6" H Stainless Steel Duct CoverDC48US
48" W, 12" H Stainless Steel Duct CoverDCT48US
48" W Stainless Steel BacksplashPA48JBS
Roof Jack and TransitionRJ310
10" Wall CapWC10
See page 220-221 for accessories.
Bulb Type40 W - G9 Base
Total Power Of The Lamps (W)160 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style Bafe
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15; 20 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) Back10"
Net Weight (lbs)98 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Steel
120 V
60 HZ
120V-3 Prong
18" x 47 15/16" x 27"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
230
Page 30
PH54GS
27-INCH DEPTH WALL HOOD (54-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of Lights4
42-inch model PH42GS shown
FEATURES & BENEFITS
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Powerfully Quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- 27" depth hood is a perfect companion to the Pro Grand
Professional Range
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
Roof Jack and TransitionRJ310
10" Wall CapWC10
See page 220-221 for accessories.
Bulb Type40 W - G9 Base
Total Power Of The Lamps (W)160 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style Bafe
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15; 20 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) Back10"
Net Weight (lbs)111 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Steel
120 V
60 HZ
120V-3 Prong
18" x 54" x 27"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
VENTILATION – WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
231
Page 31
PH60GS
27-INCH DEPTH WALL HOOD (60-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of Lights4
42-inch model PH42GS shown
FEATURES & BENEFITS
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Powerfully Quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- 27" depth hood is a perfect companion to the Pro Grand
Professional Range
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
Roof Jack and TransitionRJ310
10" Wall CapWC10
See page 220-221 for accessories.
AVAILABLE SUMMER 2016
Bulb Type40 W - G9 Base
Total Power Of The Lamps (W)160 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style Bafe
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15; 20 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) Back10"
Net Weight (lbs)Coming Soon
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)Coming Soon
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Steel
120 V
60 HZ
120V-3 Prong
18" x 60" x 27"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
232
Page 32
PH30HS
24-INCH DEPTH WALL HOOD (30-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of Lights2
Bulb Type40 W - G9 Base
Total Power Of The Lamps (W)80 W
Damper IncludedYes
FEATURES & BENEFITS
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Filter systems are highly efcient at capturing grease
- Dishwasher-safe grease collection trays are easily removed
- 24" depth hood is 18" tall and a perfect companion with
Pro Harmony Ranges and Rangetops
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
30" W Keep-Hot ShelfKHS30QS
30" W, 6" H Stainless Steel Duct CoverDC30US
30" W, 12" H Stainless Steel Duct CoverDCT30US
30" W Stainless Steel BacksplashPA30JBS
Roof Jack and TransitionRJ310
10" Wall CapWC10
See page 220-221 for accessories.
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style Bafe
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15; 20 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) Back10"
Net Weight (lbs)70 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Steel
120 V
60 HZ
120V-3 Prong
18" x 29 15/16" x 24"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
VENTILATION – WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
233
Page 33
PH36HS
24-INCH DEPTH WALL HOOD (36-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of Lights2
Bulb Type40 W - G9 Base
Total Power Of The Lamps (W)80 W
Damper IncludedYes
FEATURES & BENEFITS
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Filter systems are highly efcient at capturing grease
- Dishwasher-safe grease collection trays are easily removed
- 24" depth hood is 18" tall and a perfect companion with
Pro Harmony Ranges and Rangetops
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
36" W Keep-Hot ShelfKHS36QS
36" W, 6" H Stainless Steel Duct CoverDC36US
36" W, 12" H Stainless Steel Duct CoverDCT36US
36" W Stainless Steel BacksplashPA36JBS
Roof Jack and TransitionRJ310
10" Wall CapWC10
See page 220-221 for accessories.
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style Bafe
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15; 20 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) Back10"
Net Weight (lbs)75 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Steel
120 V
60 HZ
120V-3 Prong
18" x 35 15/16" x 24"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
234
Page 34
PH48HS
24-INCH DEPTH WALL HOOD (48-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of Lights4
Bulb Type40 W - G9 Base
Total Power Of The Lamps (W)160 W
Damper IncludedYes
FEATURES & BENEFITS
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Filter systems are highly efcient at capturing grease
- Dishwasher-safe grease collection trays are easily removed
- 24" depth hood is 18" tall and a perfect companion with
Pro Harmony Ranges and Rangetops
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
48" W Keep-Hot ShelfKHS48QS
48" W, 6" H Stainless Steel Duct CoverDC48US
48" W, 12" H Stainless Steel Duct CoverDCT48US
48" W Stainless Steel BacksplashPA48JBS
Roof Jack and TransitionRJ310
10" Wall CapWC10
See page 220-221 for accessories.
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style Bafe
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15; 20 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) Back10"
Net Weight (lbs)94 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Steel
120 V
60 HZ
120V-3 Prong
18" x 47 15/16" x 24"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
VENTILATION – WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
235
Page 35
HPWB30FS
24-INCH DEPTH WALL HOOD WITH BLOWER
(30-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFM600 CFM
Number of Speed Settings3-Stage
Motor LocationIntegrated
Number Of Lights2
Bulb Type50 W - G10 Base
Total Power Of The Lamps (W)100 W
FEATURES & BENEFITS
- 600 CFM Integrated Blower included
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
ACCESSORIES (OPTIONAL)
Recirculation Kit
RECIRC30FS - For 30" Hood Only
Replacement Charcoal Filter - CHFILT3036
For Use With Recirculation Kit RECIRC_FS
30" W, 6" H Stainless Steel Duct CoverDC30US
30" W, 12" H Stainless Steel Duct CoverDCT30US
30" W Stainless Steel BacksplashPA30JBS
See page 220-221 for accessories.
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)550 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) BackN/A
Net Weight (lbs)35 lbs
ACCESSORIES (REQUIRED)
Recirculation Kit
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts And Labor2 Year
Recirculating
120 V
60 HZ
Fixed Connection
11" x 30" x 23
30" / 30"
N/A
N/A
N/A
N/A
N/A
N/A
1
/8"
236
Page 36
HPWB36FS
24-INCH DEPTH WALL HOOD WITH BLOWER
(36-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFM1,200 CFM
Number of Speed Settings3-Stage
Motor LocationIntegrated
Number Of Lights2
Bulb Type50 W - G10 Base
Total Power Of The Lamps (W)100 W
FEATURES & BENEFITS
- 1,200 CFM Integrated Blower included
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
ACCESSORIES (OPTIONAL)
36" W, 6" H Stainless Steel Duct CoverDC36US
36" W, 12" H Stainless Steel Duct CoverDCT36US
36" W Stainless Steel BacksplashPA36JBS
See page 220-221 for accessories.
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)550 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) BackN/A
Net Weight (lbs)33 lbs
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts And Labor2 Year
120 V
60 HZ
Fixed Connection
11" x 36" x 23
30" / 30"
N/A
N/A
N/A
N/A
N/A
N/A
1
VENTILATION – WALL HOODS | SPECIFICATIONS
/8"
1.800.735.4328 | THERMADOR.COM
237
Page 37
HPWB48FS
24-INCH DEPTH WALL HOOD WITH BLOWER
(48-INCH WIDTH)
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFM1,200 CFM
Number of Speed Settings3-Stage
Motor LocationIntegrated
Number Of Lights3
Bulb Type50 W - G10 Base
FEATURES & BENEFITS
- 1,200 CFM Integrated Blower included
- Three fan speeds
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
ACCESSORIES (OPTIONAL)
48" W, 6" H Stainless Steel Duct CoverDC48US
48" W, 12" H Stainless Steel Duct CoverDCT48US
48" W Stainless Steel BacksplashPA48JBS
See page 220-221 for accessories.
Total Power Of The Lamps (W)150 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)1,050 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) BackN/A
Net Weight (lbs)30 lbs
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts And Labor2 Year
120 V
60 HZ
Fixed Connection
11" x 48" x 23
30" / 30"
N/A
N/A
N/A
N/A
N/A
N/A
1
/8"
238
Page 38
HMWN30FS
WALL HOOD (30-INCH WIDTH)
MASTERPIECE
FEATURES & BENEFITS
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
- Three fan speeds plus 10 minute high-power operation mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe low-prole bafe lters
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
Recirculation Kit
RECIRC30FS - For 30" and 36" Hoods Only
Replacement Charcoal Filter - CHFILT3036
For Use With Recirculation Kit RECIRC_FS
30" W, 6" H Stainless Steel Duct CoverDC30US
30" W, 12" H Stainless Steel Duct CoverDCT30US
30" W Stainless Steel BacksplashPA30JBS
See page 220-221 for accessories.
®
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of LightsLights Sold
Bulb Type50 W - G10 Base
Total Power Of The Lamps (W)100 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)100 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) BackN/A
Net Weight (lbs)35 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN600N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Recirculating
Separately)
Separately - 2
120 V
60 HZ
Fixed Connection
1
11" x 30" x 23
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
/8"
VENTILATION – WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
239
Page 39
HMWN36FS
WALL HOOD (36-INCH WIDTH)
MASTERPIECE
FEATURES & BENEFITS
- Three fan speeds plus 10 minute high-power operation mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe low-prole bafe lters
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
Recirculation Kit
RECIRC30FS - For 30" and 36" Hoods Only
36" W, 6" H Stainless Steel Duct CoverDC36US
36" W, 12" H Stainless Steel Duct CoverDCT36US
36" W Stainless Steel BacksplashPA36JBS
See page 220-221 for accessories.
®
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of LightsLights Sold
Bulb Type50 W - G10 Base
Total Power Of The Lamps (W)100 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)100 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) BackN/A
Net Weight (lbs)33 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN600N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Recirculating
Separately)
Separately - 2
120 V
60 HZ
Fixed Connection
1
11" x 36" x 23
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
/8"
240
Page 40
HMWN48FS
WALL HOOD (48-INCH WIDTH)
MASTERPIECE
FEATURES & BENEFITS
- Three fan speeds plus 10 minute high-power operation mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe low-prole bafe lters
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
48" W, 6" H Stainless Steel Duct CoverDC48US
48" W, 12" H Stainless Steel Duct CoverDCT48US
48" W Stainless Steel BacksplashPA48JBS
See page 220-221 for accessories.
®
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMN/A
Number of Speed Settings3-Stage
Motor LocationBlower (Sold
Number Of LightsLights Sold
Bulb Type50 W - G10 Base
Total Power Of The Lamps (W)100 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)150 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) BackN/A
Net Weight (lbs)30 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN600N - 600 CFM
WARRANTY
Limited Warranty Parts And Labor2 Year
Separately)
Separately - 3
120 V
60 HZ
Fixed Connection
11" x 48" x 23 1/8"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1000N - 1000 CFM
VENTILATION – WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
241
Page 41
HMWB30FS
WALL HOOD WITH BLOWER (30-INCH WIDTH)
MASTERPIECE
FEATURES & BENEFITS
- 600 CFM Integrated Blower included
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
- Three fan speeds plus 10 minute high-power operation mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
Recirculation Kit
RECIRC30FS - For 30" Hood Only
Replacement Charcoal Filter - CHFILT3036
For Use With Recirculation Kit RECIRC_FS
30" W, 6" H Stainless Steel Duct CoverDC30US
30" W, 12" H Stainless Steel Duct CoverDCT30US
30" W Stainless Steel BacksplashPA30JBS
See page 220-221 for accessories.
®
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFM600 CFM
Number of Speed Settings3-Stage
Motor LocationIntegrated
Number Of LightsLights Sold
Bulb Type50 W - G10 Base
Total Power Of The Lamps (W)100 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)550 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) BackN/A
Net Weight (lbs)35 lbs
ACCESSORIES (REQUIRED)
Recirculation Kit
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts And Labor2 Year
Recirculating
Separately - 2
120 V
60 HZ
Fixed Connection
11" x 30" x 23 1/8"
30" / 30"
N/A
N/A
N/A
N/A
N/A
N/A
242
Page 42
HMWB36FS
WALL HOOD WITH BLOWER (36-INCH WIDTH)
MASTERPIECE
FEATURES & BENEFITS
- 600 CFM Integrated Blower included
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
- Three fan speeds plus 10 minute high-power operation mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
Recirculation Kit
RECIRC36FS - For 36" Hood Only
Replacement Charcoal Filter - CHFILT3036
For Use With Recirculation Kit RECIRC_FS
36" W, 6" H Stainless Steel Duct CoverDC36US
36" W, 12" H Stainless Steel Duct CoverDCT36US
36" W Stainless Steel BacksplashPA36JBS
See page 220-221 for accessories.
®
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFM600 CFM
Number of Speed Settings3-Stage
Motor LocationIntegrated
Number Of LightsLights Sold
Bulb Type50 W - G10 Base
Total Power Of The Lamps (W)100 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)550 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Diameter of Air Duct (in) BackN/A
Net Weight (lbs)33 lbs
ACCESSORIES (REQUIRED)
Recirculation Kit
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts And Labor2 Year
Recirculating
Separately - 2
120 V
60 HZ
Fixed Connection
11" x 36" x 23 1/8"
30" / 30"
N/A
N/A
N/A
N/A
N/A
N/A
VENTILATION – WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
243
Page 43
WALL HOODS
9
5/
8
"
7
3/
8
"
88
3/3/
88
""
77
1/1/
44
""
131311//88""
1616
3/3/
44
""
PLANNING INFORMATION
MODEL OPTIONS
When selecting a ventilation system, choose from one of our two
sophisticated appliance collections. Select Professional Series for the
ultimate in cooking and venting power or the Masterpiece® Series for
its sleek styling and numerous convenience functions. Thermador Wall
Hoods are available in various depths and heights to t your kitchen
plans and are meticulously crafted for both function and design. Be
sure to reference the correct model information in this design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Wall Hood is properly installed and grounded
by a qualied technician. Installation, electrical connections and
grounding must comply with all applicable local codes.
Install a suitable conduit box (not furnished). An appropriatelysized, UL-listed conduit connector must be used to correctly attach
the conduit to the junction box. Remote blowers require a 5-wire
installation.
MODELREQUIRED CIRCUIT BREAKER
120V AC, 60 Hz
PH36GS15; 20 A
PH42GS15; 20 A
PH48GS15; 20 A
PH54GS15; 20 A
PH60GS15; 20 A
PH30HS15; 20 A
PH36HS15; 20 A
PH48HS15; 20 A
HPWB30FS15 A
HPWB36FS15 A
HPWB48FS15 A
HMWN30FS15 A
HMWN36FS15 A
HMWN48FS15 A
HMWB30FS15 A
HMWB36FS15 A
INSTALLATION CONSIDERATIONS
The information in this design guide provides key features, product
dimensions, cutouts and installation specications. Before installing
a Thermador Wall Hood, be sure to verify the cutout dimensions
and electrical connections. Also, always consult with the installation
manual packed with the product for complete details before
installing.
INSTALLATION OPTIONS
Thermador Wall Hoods may be installed above a Thermador Range
or Cooktop to create a convenient cooking center. Refer to the
ventilation selection guide for compatibility.
Hood installation height above a range or cooktop can vary. To
obtain the necessary installation height above a Thermador Range or
Cooktop, consult the appliance’s installation manual. Accessory 6"
and / or 12" tall duct covers are used to ll the space between the
hood and ceiling.
Thermador Wall Hoods can be mounted on a wall or suspended from
a cabinet. The cabinet must be structurally joined to the wall studs to
support the weight of this hood.
TRANSITIONS
– Included with PH__GS models (except 60") and PH__HS models
– 10" round downdraft transition
– Required for installation of 1000 and 1300 CFM inline and remote
blowers
– Included with PH60GS
244
Page 44
WALL HOODS
INSTALLATION
VENTILATION – WALL HOODS | INSTALLATION
PH36GS
27-INCH DEPTH WALL HOOD (36-INCH WIDTH)
PH42GS
27-INCH DEPTH WALL HOOD (42-INCH WIDTH)
PH48GS
27-INCH DEPTH WALL HOOD (48-INCH WIDTH)
PH54GS
27-INCH DEPTH WALL HOOD (54-INCH WIDTH)
PH60GS
27-INCH DEPTH WALL HOOD (60-INCH WIDTH)
COMING SOON
go to Thermador.com for
the latest specications
1.800.735.4328 | THERMADOR.COM
245
Page 45
WALL HOODS
INSTALLATION
PH30HS
24-INCH DEPTH WALL HOOD (30-INCH WIDTH)
30"
21
PH36HS
24-INCH DEPTH WALL HOOD (36-INCH WIDTH)
HPWB30FS
24-INCH DEPTH WALL HOOD WITH BLOWER
(30-INCH WIDTH)
HPWB36FS
24-INCH DEPTH WALL HOOD WITH BLOWER
(36-INCH WIDTH)
36"
21
PH48HS
24-INCH DEPTH WALL HOOD (48-INCH WIDTH)
48"
21
HPWB48FS
24-INCH DEPTH WALL HOOD WITH BLOWER
(48-INCH WIDTH)
246
Page 46
WALL HOODS
INSTALLATION
VENTILATION – WALL HOODS | INSTALLATION
HMWN30FS
WALL HOOD (30-INCH WIDTH)
HMWN36FS
WALL HOOD (36-INCH WIDTH)
HMWB30FS
WALL HOOD WITH BLOWER (30-INCH WIDTH)
HMWB36FS
WALL HOOD WITH BLOWER (36-INCH WIDTH)
HMWN48FS
WALL HOOD (48-INCH WIDTH)
1.800.735.4328 | THERMADOR.COM
247
Page 47
VENTILATION
CHIMNEY
WALL
HOODS
248
MODELS SHOWN: HDDW36FS CHIMNEY WALL DRAWER HOOD, SGSX365FS GAS COOKTOP AND MED301JS BUILT-IN OVEN
Page 48
CHIMNEY WALL HOODS
VENTILATION
Our Professional Series chimney style wall hoods
impart a more contemporary feel to the kitchen
®
space while Masterpiece
traditional feel. Each model is adjustable to suit a
range of ceiling heights and includes conveniences
The stainless steel, commercial style bafe lters make
high-grease cooking easy. They are dishwasher-safe for
easy cleanup.
MESH FILTERS
Aluminum mesh lters with stainless steel frame maximize
grease capture without affecting ow and feature a quick
release latch for easy cleanup.
Series impart a more
VENTILATION – CHIMNEY WALL HOODS | FEATURES & BENEFITS
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
ELECTRONIC TOUCH CONTROL
The sleek electronic touch control panel is easy-to-use
and easy-to-clean.
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: All Thermador ventilation lters are
dishwasher-safe, and many hoods feature a built-in
Time-to-Clean-Filter reminder light. (Except HMCB36FS,
HMCB42FS)
DELAYED SHUT-OFF
For the greatest efciency, our Masterpiece® ventilation
models include delayed shut-off to tackle lingering odors.
(Except HMCB36FS, HMCB42FS)
MODELS SHOWN: PCG366G PRO RANGETOP AND HMCN36FS
CHIMNEY WALL HOOD. KITCHEN DESIGN BY: CHRISTY M.
BOWEN & ROY FAUST, TWELVE STONES DESIGNS / NEW
CREATIONS CUSTOM KITCHENS AND BATHS
1.800.735.4328 | THERMADOR.COM
249
Page 49
HPCN36NS
36-INCH CHIMNEY WALL HOOD
PROFESSIONAL SERIES
FEATURES & BENEFITS
- Three fan speeds
- Powerfully Quiet ventilation systems
- Dimmer lighting – for a soft lighting effect
- Commercial-Style Stainless Steel Bafe Filter
- Dishwasher safe grease collection trays are easily removed
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
36" W Keep-Hot ShelfKHS36QS
6" High Duct CoverCHMHP366N
12" High Duct CoverCHMHP3612N
18" - 35" High Duct CoverCHMHP36TSN
36" W Stainless Steel BacksplashPA36JBS
See page 222 for accessories.
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMBlower Sold Separately
SonesN/A
Number of Speed Settings3-Stage
Motor LocationBlower Sold Separately
Number of Lights2
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)Duct Covers Sold
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Net Weight (lbs)70 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN1080N - 1000 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
Steel
Stainless Steel Bafe
Filter
120 V
60 Hz
Fixed Connection,
No Plug
N/A
15
18" x 35
Separately
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
/16" x 24"
250
Page 50
HPCN48NS
48-INCH CHIMNEY WALL HOOD
PROFESSIONAL SERIES
FEATURES & BENEFITS
- Three fan speeds
- Powerfully Quiet ventilation systems
- Dimmer lighting – for a soft lighting effect
- Commercial-Style Stainless Steel Bafe Filter
- Dishwasher safe grease collection trays are easily removed
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
48" W Keep-Hot ShelfKHS48QS
6" High Duct CoverCHMHP486N
12" High Duct CoverCHMHP4812N
18" - 35" High Duct CoverCHMHP48TSN
48" W Stainless Steel BacksplashPA48JBS
See page 222 for accessories.
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMBlower Sold Separately
SonesN/A
Number of Speed Settings3-Stage
Motor LocationBlower Sold Separately
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)Duct Covers Sold
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Net Weight (lbs)88 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN1080N - 1000 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
Steel
Stainless Steel Bafe
Filter
120 V
60 Hz
Fixed Connection,
No Plug
N/A
15
18" x 47
Separately
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
/16" x 24"
VENTILATION – CHIMNEY WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
251
Page 51
HPCB36NS
36-INCH CHIMNEY WALL HOOD WITH BLOWER
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFM1,000 CFM
Sones12.0 HS / 4.0 WS
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor In
Number of Lights2
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style
TECHNICAL DETAILS
Watts (W)N/A
Current (A)15 A
Volts (V)
FEATURES & BENEFITS
- 1,000 CFM Integrated Blower included
- Three fan speeds
- Dimmer lighting – for a soft lighting effect
- Commercial-Style Stainless Steel Bafe Filter
- Filter systems are highly efcient at capturing grease
ACCESSORIES (OPTIONAL)
36" W Keep-Hot ShelfKHS36QS
6" High Duct CoverCHMHP366N
12" High Duct CoverCHMHP3612N
18" - 35" High Duct CoverCHMHP36TSN
36" W Stainless Steel BacksplashPA36JBS
See page 222 for accessories.
Frequency (Hz)
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)Duct Covers Sold
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Net Weight (lbs)91 lbs
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts and Labor2 Year
Hood Body
Steel
Stainless Steel Bafe
Filter
120 V
60 Hz
Fixed Connection,
No Plug
N/A
15
18" x 35
Separately
30" / 30"
N/A
N/A
N/A
N/A
N/A
/16" x 24"
252
Page 52
HPCB48NS
48-INCH CHIMNEY WALL HOOD WITH BLOWER
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFM1,000 CFM
Sones10.5 HS / 2.5 WS
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor In
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeCommercial-Style
TECHNICAL DETAILS
FEATURES & BENEFITS
- 1,000 CFM Integrated Blower included
- Three fan speeds
- Dimmer lighting – for a soft lighting effect
- Commercial-Style Stainless Steel Bafe Filter
- Filter systems are highly efcient at capturing grease
ACCESSORIES (OPTIONAL)
48" W Keep-Hot ShelfKHS48QS
6" High Duct CoverCHMHP486N
12" High Duct CoverCHMHP4812N
18" - 35" High Duct CoverCHMHP48TSN
48" W Stainless Steel BacksplashPA48JBS
See page 222 for accessories.
Watts (W)N/A
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)Duct Covers Sold
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top10"
Net Weight (lbs)110 lbs
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts and Labor2 Year
Hood Body
Steel
Stainless Steel Bafe
Filter
120 V
60 Hz
Fixed Connection,
No Plug
N/A
15
18" x 47
Separately
30" / 30"
N/A
N/A
N/A
N/A
N/A
/16" x 24"
VENTILATION – CHIMNEY WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
253
Page 53
HMCN36FS
36-INCH CHIMNEY WALL HOOD
MASTERPIECE® SERIES
FEATURES & BENEFITS
- Three fan speeds plus 10 minute high-power operation mode
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Dimmer lighting–for those hours after a late meal
- Dishwasher-safe stainless-frame mesh lters
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
Stainless Steel Chimney Hood Extension - CHIMXHMC
For up to 11-foot ceiling applications. Extension replaces upper
section of standard chimney extension. May require fabrication
to reduce height.
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMBlower Sold Separately
SonesN/A
Number of Speed Settings3-Stage
Motor LocationBlower Sold Separately
Number of Lights3
Bulb TypeHalogen
Total Power of the Lamps (W)20 W
Damper IncludedNo
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)60 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)21 1/2" - 25 1/2"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top8"
Net Weight (lbs)41 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN1080N - 1000 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
110 V
60 Hz
120V-3 Prong
N/A
1
31" - 35" x 35
x 21 1/2"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
/2"
See page 222 for accessories.
254
Page 54
HMCN42FS
42-INCH CHIMNEY WALL HOOD
MASTERPIECE® SERIES
FEATURES & BENEFITS
- Three fan speeds plus 10 minute high-power operation mode
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Dimmer lighting–for those hours after a late meal
- Dishwasher-safe stainless-frame mesh lters
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
Stainless Steel Chimney Hood Extension - CHIMXHMC
For up to 11-foot ceiling applications. Extension replaces upper
section of standard chimney extension. May require fabrication
to reduce height.
See page 222 for accessories.
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMBlower Sold Separately
SonesN/A
Number of Speed Settings3-Stage
Motor LocationBlower Sold Separately
Number of Lights3
Bulb TypeHalogen
Total Power of the Lamps (W)20 W
Damper IncludedNo
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)60 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)21 1/2" - 25 1/2"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top8"
Net Weight (lbs)44 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN1080N - 1000 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
110 V
60 Hz
120V-3 Prong
51"
1
31" - 35" x 41
x 21 1/2"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
/2"
VENTILATION – CHIMNEY WALL HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
255
Page 55
HMCB36FS
36-INCH CHIMNEY WALL HOOD WITH BLOWER
MASTERPIECE® SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFM600 CFM
SonesN/A
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor In
Number of Lights3
Bulb TypeHalogen
Total Power of the Lamps (W)20 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)590 W
Current (A)15 A
Volts (V)
Frequency (Hz)
FEATURES & BENEFITS
- 600 CFM Integrated Blower included
- Three fan speeds plus 10 minute high-power operation mode
- Dishwasher-safe stainless-frame mesh lters
- Filter systems are highly efcient at capturing grease
®
- Powerfully Quiet
ACCESSORIES (OPTIONAL)
Stainless Steel Chimney Hood Extension - CHIMXHMC
For up to 11-foot ceiling applications. Extension replaces upper
section of standard chimney extension. May require fabrication
to reduce height.
See page 222 for accessories.
ventilation systems
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)21 1/2" - 25 1/2"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top6"
Net Weight (lbs)48 lbs
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts and Labor2 Year
Hood Body
110 V
60 Hz
120V-3 Prong
51"
31" - 35" / x 35
x 21 1/2"
30" / 30"
N/A
N/A
N/A
N/A
N/A
1
/2"
256
Page 56
HMCB42FS
42-INCH CHIMNEY WALL HOOD WITH BLOWER
MASTERPIECE® SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFM600 CFM
SonesN/A
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor In
Number of Lights3
Bulb TypeHalogen
Total Power of the Lamps (W)20 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)590 W
Current (A)15 A
FEATURES & BENEFITS
- 600 CFM Integrated Blower included
- Three fan speeds plus 10 minute high-power operation mode
- Dishwasher-safe stainless-frame mesh lters
- Filter systems are highly efcient at capturing grease
®
- Powerfully Quiet
ACCESSORIES (OPTIONAL)
Stainless Steel Chimney Hood Extension - CHIMXHMC
For up to 11-foot ceiling applications. Extension replaces upper
section of standard chimney extension. May require fabrication
to reduce height.
See page 222 for accessories.
ventilation systems
Volts (V)
Frequency (Hz)
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)21 1/2" - 25 1/2"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top6"
Net Weight (lbs)57 lbs
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts and Labor2 Year
Hood Body
110 V
60 Hz
120V-3 Prong
51"
31" - 35" / x 41
x 21 1/2"
30" / 30"
N/A
N/A
N/A
N/A
N/A
1
VENTILATION – CHIMNEY WALL HOODS | SPECIFICATIONS
/2"
1.800.735.4328 | THERMADOR.COM
257
Page 57
HDDW36FS
36-INCH CHIMNEY WALL DRAWER HOOD
MASTERPIECE® SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFM600 CFM
SonesN/A
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor In
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)20 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
FEATURES & BENEFITS
- Unique sliding stainless canopy can be pushed back against
the wall for increased head room
- 45% increase in capture area when hood is extended
- 600 CFM Integrated Blower included
- Three fan speeds plus 10 minute high-power operation
mode
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours
of operation
ACCESSORIES (OPTIONAL)
Stainless Steel Chimney Hood Extension - CHIMXHDD
For up to 11-foot ceiling applications. Extension replaces upper
section of standard chimney extension. May require fabrication
to reduce height.
See page 222 for accessories.
TECHNICAL DETAILS
Watts (W)610 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Conduit Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width of
Canopy Included) (HxWxD) (in)
Height of The Chimney (in)23 7/8" - 39 5/8"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top6"
Net Weight (lbs)64 lbs
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
Inline Blower
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts and Labor2 Year
Hood Body
120 V
60 Hz
120V-3 Prong
51"
3
/4" - 42 1/2" x
26
35 1/2" x 17"
30" / 30"
N/A
N/A
N/A
N/A
N/A
258
THERMADOR EXCLUSIVE
Page 58
CHIMNEY WALL HOODS
PLANNING INFORMATION
VENTILATION – CHIMNEY WALL HOODS | PLANNING INFORMATION
MODEL OPTIONS
Thermador Chimney Wall Hoods feature sleek styling and numerous
convenience functions. Chimney Wall Hoods are available in 36-inch,
42-inch and 48-inch widths and are adjustable to suit a range of
ceiling heights. All stainless steel or stainless steel with glass designs
are available. Be sure to reference the correct model information in
this design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Chimney Wall Hood is properly installed and
grounded by a qualied technician. Installation, electrical connections
and grounding must comply with all applicable local codes.
If possible, site the earthed socket directly behind the chimney
paneling. The grounded socket should be connected via its own
circuit. If the grounded socket is no longer accessible following
installation of the hood, ensure that there is a permanently installed
disconnector.
MODELREQUIRED CIRCUIT BREAKER
120V AC, 60 Hz
HPCN36NS15 A
HPCN48NS15 A
HPCB36NS15 A
HPCB48NS15 A
HMCN36FS15 A
HMCN42FS15 A
HMCB36FS15 A
HMCB42FS15 A
HDDW36FS15 A
INSTALLATION CONSIDERATIONS
The information in this design guide provides key features, product
dimensions, cutouts and installation specications. Before installing
a Thermador Chimney Wall Hood, be sure to verify the cutout
dimensions and electrical connections. Also, always consult with the
installation manual packed with the product for complete details
before installing.
INSTALLATION OPTIONS
Thermador Chimney Wall Hoods may be installed above a Thermador
Range or Cooktop to create a convenient cooking center. Refer to the
ventilation selection guide for compatibility.
Hood installation height above a range or cooktop can vary. To
obtain the necessary installation height above a Thermador Range or
Cooktop, consult the appliance’s installation manual. An accessory
Hood Extension can be used to ll the space between the hood and
ceiling.
Thermador Wall Hoods can be mounted on a wall or suspended from
a cabinet. The cabinet must be structurally joined to the wall studs to
support the weight of this hood.
1.800.735.4328 | THERMADOR.COM
259
Page 59
CHIMNEY WALL HOODS
INSTALLATION
HPCN36NS
36-INCH CHIMNEY WALL HOOD
HPCB36NS
36-INCH CHIMNEY WALL HOOD WITH BLOWER
HMCN36FS
36-INCH CHIMNEY WALL HOOD
HPCN48NS
48-INCH CHIMNEY WALL HOOD
HPCB48NS
48-INCH CHIMNEY WALL HOOD WITH BLOWER
HMCB36FS
36-INCH CHIMNEY WALL HOOD WITH BLOWER
260
Page 60
CHIMNEY WALL HOODS
INSTALLATION
VENTILATION – CHIMNEY WALL HOODS | INSTALLATION
HMCN42FS
42-INCH CHIMNEY WALL HOOD
HMCB42FS
42-INCH CHIMNEY WALL HOOD WITH BLOWER
HDDW36FS
36-INCH CHIMNEY WALL DRAWER HOOD
INSTALLATION NOTE: This product ships with two
transport brackets to hold the movable canopy in place
during shipping and installation. After installation, be
sure to remove the brackets to operate the sliding
drawer canopy.
1.800.735.4328 | THERMADOR.COM
261
Page 61
VENTILATION
ISLAND
HOODS
262
MODELS SHOWN: HMIB40HS ISLAND HOOD AND CIT365KB INDUCTION COOKTOP
Page 62
ISLAND HOODS
VENTILATION
Thermador® Island Hoods make an artful design
statement in your kitchen. With excellent efciency
in drawing away smoke, moisture and heat, the
adjustable chimney height is perfect over island
cooktop or range installations. Dishwasher-safe
lters make cleanup easy.
EXTERIOR CONTROLS
Easy-to-clean, easy-to-use push-button controls put
accuracy at your ngertips.
POWERFULLY QUIET® OPERATION
Steam, smoke and odors are no problem for Thermador
ducted ventilation systems.
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: All Thermador ventilation lters are
dishwasher-safe, and many hoods feature a built-in
Time-to-Clean-Filter reminder light.
VENTILATION – ISLAND HOODS | FEATURES & BENEFITS
DISHWASHER-SAFE FILTERS
Dishwasher-safe aluminum lters for easy-clean
maintenance.
DELAYED SHUT-OFF
For the greatest efciency, our Professional and
Masterpiece® ventilation models include delayed
shut-off to tackle lingering odors.
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
1.800.735.4328 | THERMADOR.COM
263
Page 63
HPIN42HS
42-INCH LOW PROFILE ISLAND HOOD
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMBlower Sold Separately
Number of Speed Settings3-Stage
Motor LocationN/A
Number Of Lights4
Bulb TypeHalogen 20 W -
Total Power Of The Lamps (W)80 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
FEATURES & BENEFITS
- Three fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe frameless lters with stainless steel covers
- Filter systems are highly efcient at capturing grease
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers:
VTR630P, VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
See page 223 for accessories.
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)80 W
Current (A)10 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Height Of The Chimney (in)28 3/8" - 39 7/16"
Minimum Ceiling Height Required97 3/16"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top6"
Net Weight (lbs)87 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
WARRANTY
Limited Warranty Parts And Labor2 Year
G9 Base
Steel
120 V
60 Hz
120V-3 Prong
2
/
16
"
51
3
30
/8" - 41 3/8" /
x 41 1/3" x 27 1/2"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
264
Page 64
HPIN48HS
48-INCH LOW PROFILE ISLAND HOOD
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Maximum CFMBlower Sold Separately
Number of Speed Settings3-Stage
Motor LocationN/A
Number Of Lights4
Bulb TypeHalogen 20 W -
Total Power Of The Lamps (W)80 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
FEATURES & BENEFITS
- Three fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
- Dishwasher-safe frameless lters with stainless steel covers
- Filter systems are highly efcient at capturing grease
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers:
VTR630P, VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
See page 223 for accessories.
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)80 W
Current (A)10 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Height Of The Chimney (in)28 3/8" - 39 7/16"
Minimum Ceiling Height Required97 3/16"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top6"
Net Weight (lbs)101 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
WARRANTY
Limited Warranty Parts And Labor2 Year
G9 Base
Steel
120 V
60 Hz
120V-3 Prong
2
/
16
"
51
3
30
/8" - 41 3/8" /
x 47 1/4" x 27 1/2"
30" / 30"
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VENTILATION – ISLAND HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
265
Page 65
HPIB42HS
42-INCH LOW PROFILE ISLAND HOOD WITH BLOWER
MASTERPIECE® SERIES
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFM600 CFM
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor in
Number Of Lights4
Bulb TypeHalogen 20 W -
Total Power Of The Lamps (W)80 W
Damper IncludedYes
FEATURES & BENEFITS
- 600 CFM Integrated Blower included
- Recirculation possible with kit RECIRISL
- Three fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
Recirculation Kit
RECIRISL - For use with 600 CFM Blowers Only
Replacement Charcoal Filters
CHFILISL - For use with Recirculation Kit RECIRISL
See page 223 for accessories.
Grease Filter MaterialWashable Stainless
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)640 W
Current (A)10 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Height Of The Chimney (in)28 3/8" - 39 7/16"
Minimum Ceiling Height Required97 3/16"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top6"
Net Weight (lbs)96 lbs
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
WARRANTY
Limited Warranty Parts And Labor2 Year
Recirculating
Hood Chimney
G9 Base
Steel
120 V
60 Hz
120V-3 Prong
2
/
16
"
51
30 3/8" - 41 3/8" /
x 41 1/3" x 27 1/2"
30" / 30"
N/A
N/A
N/A
N/A
N/A
266
Page 66
HPIB48HS
48-INCH LOW PROFILE ISLAND HOOD WITH BLOWER
MASTERPIECE® SERIES
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFM600 CFM
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor in
Number Of Lights4
Bulb TypeHalogen 20 W -
Total Power Of The Lamps (W)80 W
Damper IncludedYes
FEATURES & BENEFITS
- 600 CFM Integrated Blower included
- Recirculation possible with kit RECIRISL
- Three fan speeds
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
Recirculation Kit
RECIRISL - For use with 600 CFM Blowers Only
Replacement Charcoal Filters
CHFILISL - For use with Recirculation Kit RECIRISL
See page 223 for accessories.
Grease Filter MaterialWashable Stainless
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)640 W
Current (A)10 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Height Of The Chimney (in)28 3/8" - 39 7/16"
Minimum Ceiling Height Required97 3/16"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top6"
Net Weight (lbs)101 lbs
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
WARRANTY
Limited Warranty Parts And Labor2 Year
Recirculating
Hood Chimney
G9 Base
Steel
120 V
60 Hz
120V-3 Prong
2
/
16
"
51
30 3/8" - 41 3/8" /
x 47 1/4" x 27 1/2"
30" / 30"
N/A
N/A
N/A
N/A
N/A
VENTILATION – ISLAND HOODS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
267
Page 67
HMIB40HS
40-INCH GLASS ISLAND HOOD WITH BLOWER
MASTERPIECE® SERIES
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFM600 CFM
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor in
Number Of Lights4
Bulb TypeHalogen 20 W -
Total Power Of The Lamps (W)80 W
Damper IncludedYes
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
FEATURES & BENEFITS
- 600 CFM Integrated Blower included
- An ideal solution for island cooktop installations
- Four fan speeds including one intensive level
- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
Recirculation Kit
RECIRISL - For use with 600 CFM Blowers Only
Replacement Charcoal Filters
CHFILISL - For use with Recirculation Kit RECIRISL
See page 223 for accessories.
Watts (W)530 W
Current (A)10 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord Length
DIMENSIONS & WEIGHT
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
Height Of The Chimney (in)28 3/8" - 39 7/16"
Minimum Ceiling Height Required97 3/16"
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in) Top6"
Net Weight (lbs)87 lbs
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
WARRANTY
Limited Warranty Parts And Labor2 Year
Recirculating
Hood Chimney
G9 Base
120 V
60 Hz
120V-3 Prong
2
/
16
"
51
30 3/8" - 41 3/8" /
x 39 5/16" x 27 1/2"
30" / 30"
N/A
N/A
N/A
N/A
N/A
268
Page 68
ISLAND HOODS
PLANNING INFORMATION
VENTILATION – ISLAND HOODS | PLANNING INFORMATION
MODEL OPTIONS
Thermador Island Hoods are available in 40-inch, 42-inch and 48-inch
widths and feature a stainless steel design and the 40-inch has an
elegant glass canopy. All of our island hoods are adjustable to suit
ceiling heights of up to 9'.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Island Hood is properly installed and
grounded by a qualied technician. Installation, electrical connections
and grounding must comply with all applicable local codes.
MODELREQUIRED CIRCUIT BREAKER
120V AC, 60 Hz
HPIN42HS10 A
HPIN48HS10 A
HPIB42HS10 A
HPIB48HS10 A
HMIB40HS10 A
INSTALLATION CONSIDERATIONS
The information in this design guide provides key features, product
dimensions and installation specications. Before installing a
Thermador Island Hood, be sure to verify the dimensions and
electrical connections. Also, always consult with the installation
manual packed with the product for complete details before
installing.
INSTALLATION OPTIONS
Thermador Island Wall Hoods may be installed above a Thermador
Range or Cooktop to create a convenient cooking center. Refer to
the ventilation selection guide for compatibility.
Hood installation height above a range or cooktop can vary. To
obtain the necessary installation height above a Thermador Range
or Cooktop, consult the appliance’s installation manual.
Thermador Island Hoods are suspended from the ceiling. The
minimum ceiling height required is 97 3/16".
1.800.735.4328 | THERMADOR.COM
269
Page 69
ISLAND HOODS
INSTALLATION
HPIN42HS
42-INCH LOW PROFILE ISLAND HOOD
31 3/16"
7
41
/16"
792
1052
HPIN48HS
48-INCH LOW PROFILE ISLAND HOOD
HPIB42HS
42-INCH LOW PROFILE ISLAND HOOD WITH BLOWER
EXTERNAL EXHAUST
31 3/16"
7
41
/16"
792
1052
INTERNAL RECIRCULATION
792
1052
31 3/16"
7
/16"
41
792
1052
31 3/16"
7
/16"
41
270
Page 70
ISLAND HOODS
INSTALLATION
VENTILATION – ISLAND HOODS | INSTALLATION
HPIB48HS
48-INCH LOW PROFILE ISLAND HOOD WITH BLOWER
EXTERNAL EXHAUST
31 3/16"
7
/16"
41
792
1052
INTERNAL RECIRCULATION
HMIB40HS
40-INCH GLASS ISLAND HOOD WITH BLOWER
EXTERNAL EXHAUST
31 3/16"
7
/16"
41
792
1052
INTERNAL RECIRCULATION
792
1052
31 3/16"
7
/16"
41
792
1052
31 3/16"
7
/16"
41
1.800.735.4328 | THERMADOR.COM
271
Page 71
VENTILATION
CUSTOM
INSERTS
272MODELS SHOWN: VCI248DS MASTERPIECE® SERIES CUSTOM INSERT
Page 72
CUSTOM INSERTS
VENTILATION
A Thermador® Custom Hood Insert allows the
home owner the ultimate creative expression
and creates a seamless design option for a wall
or island application. These inserts efciently and
quietly remove odor and steam with easy-to-access
controls. Inserts are available for both professional
and non-professional applications.
CUSTOM HOOD INSERT
Specially designed for professional custom hood
applications to create a concealed ventilation system.
TIME-TO-CLEAN-FILTER LIGHT
Easy cleanup: All Thermador ventilation lters are
dishwasher-safe, and feature a built-in Time-to-CleanFilter reminder light.
DELAYED SHUT-OFF
For the greatest efciency, our Professional ventilation
models include delayed shut-off to tackle lingering odors.
VENTILATION – CUSTOM INSERTS | FEATURES & BENEFITS
CATEGORY
FEATURES & BENEFITS
PUSH BUTTON CONTROLS
Concealed three-speed, push-button controls are easy
to use.
REMOTE VENTILATION CONTROL
Remote controls for customized ventilation applications
are easy to use and have a sophisticated and professional
style. (photo represents VCI2REMKS)
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
MESH FILTERS
Aluminum mesh lters with stainless steel frame maximize
grease capture without affecting ow. (VCI230DS,
VCI236DS, VCI248DS only)
BAFFLE FILTERS
Stainless steel commercial-style bafe lters maximize
grease capture and they’re dishwasher-safe for easy
clean-up. (VCIN and VCIB Series)
1.800.735.4328 | THERMADOR.COM
273273
Page 73
VCIN36JP
36-INCH CUSTOM INSERT
PROFESSIONAL SERIES
FEATURES & BENEFITS
- Suitable for wall or island applications
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Custom Hood LinerLINER236
Remote Control PanelVCI2REMKS
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
36" Wide Stainless Steel BacksplashPA36JBS
8" Wall CapWC8
10" Wall CapWC10
1
/4" x 10" Wall CapWC310
3
Roof Jack and TransitionRJ310
Remote Control Panel
See page 224–225 for accessories.
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationN/A
Number of Lights2
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeStainless-Steel
TECHNICAL DETAILS
Watts (W)1,020 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)Direct Wire at
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)54 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
Steel
Commercial Style
Bafe Filter
120 V
60 Hz
Fixed Connection
Junction Box
13
/16" x 33 3/4" x
12
22"
30" Electric / 30" Gas
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
274
Page 74
VCIN48JP
48-INCH CUSTOM INSERT
PROFESSIONAL SERIES
FEATURES & BENEFITS
- Suitable for wall or island applications
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Custom Hood LinerLINER248
Remote Control PanelVCI2REMKS
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
48" Wide Stainless Steel BacksplashPA48JBS
8" Wall CapWC8
10" Wall CapWC10
1
/4" x 10" Wall CapWC310
3
Roof Jack and TransitionRJ310
Remote Control Panel
See page 224–225 for accessories.
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationN/A
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeStainless-Steel
TECHNICAL DETAILS
Watts (W)1,020 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)Direct Wire at
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)65 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
Steel
Commercial Style
Bafe Filter
120 V
60 Hz
Fixed Connection
Junction Box
13
/16" x 45 3/4" x
12
22"
30" Electric / 30" Gas
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
VENTILATION – CUSTOM INSERTS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
275
Page 75
VCIN54JP
54-INCH CUSTOM INSERT
PROFESSIONAL SERIES
48-i nch mod el VCIN48JP shown
FEATURES & BENEFITS
- Suitable for wall or island applications
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Custom Hood LinerLINER254
Remote Control PanelVCI2REMKS
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
8" Wall CapWC8
10" Wall CapWC10
1
/4" x 10" Wall CapWC310
3
Roof Jack and TransitionRJ310
Remote Control Panel
See page 224–225 for accessories.
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationN/A
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeStainless-Steel
TECHNICAL DETAILS
Watts (W)1,020 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)Direct Wire at
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)73 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN630N - 600 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
Steel
Commercial Style
Bafe Filter
120 V
60 Hz
Fixed Connection
Junction Box
13
/16" x 51 3/4" x
12
22"
30" Electric / 30" Gas
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VTN1030N - 1000 CFM
276
Page 76
VCIN60RP
60-INCH CUSTOM INSERT
PROFESSIONAL SERIES
48-i nch mod el VCIN48JP shown
FEATURES & BENEFITS
- Suitable for wall or island applications
- Three fan speeds
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
8" Wall CapWC8
10" Wall CapWC10
1
/4" x 10" Wall CapWC310
3
Roof Jack and TransitionRJ310
See page 224–225 for accessories.
AVAILABLE SUMMER 2016
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationN/A
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeStainless-Steel
TECHNICAL DETAILS
Watts (W)1,020 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width Of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)81 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTN1090R - 1000 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
Steel
Commercial Style
Bafe Filter
120 V
60 Hz
Fixed Connection
Direct Wire at
Junction Box
7
/8" x 56 1/4" x
12
20 5/8"
30" Electric / 30" Gas
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VENTILATION – CUSTOM INSERTS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
277
Page 77
VCIB36JP
36-INCH CUSTOM INSERT WITH BLOWER
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor In
Number of Lights2
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
FEATURES & BENEFITS
- A unique all in one box solution that includes the hood, a 1,000
CFM blower, liner, bafe lters, lights, transition and a backdraft damper
- Suitable for wall or island applications
- Three fan speeds with a delayed shut-off that tackles lingering
odors for up to 10 minutes
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
ACCESSORIES (OPTIONAL)
Custom Hood Installation TrimTRIMS236
Remote Control PanelVCI2REMKS
36" Wide Stainless Steel BacksplashPA36JBS
8" Wall CapWC8
10" Wall CapWC10
3 1/4" x 10" Wall CapWC310
Roof Jack and TransitionRJ310
Remote Control Panel
See page 224–225 for accessories.
Grease Filter MaterialWashable Stainless
Grease Filter TypeStainless-Steel
TECHNICAL DETAILS
Watts (W)1,020 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)Direct Wire at
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)86 lbs
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts and Labor2 Year
Hood Body
Steel
Commercial Style
Bafe Filter
120 V
60 Hz
Fixed Connection
Junction Box
5
/16" x 40 1/2" x
14
24 3/4"
30" Electric / 30" Gas
N/A
N/A
N/A
N/A
N/A
278
Page 78
VCIB48JP
48-INCH CUSTOM INSERT WITH BLOWER
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor In
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
Damper IncludedYes
FEATURES & BENEFITS
- A unique all in one box solution that includes the hood, a 1,000
CFM blower, liner, bafe lters, lights, transition and a backdraft damper
- Suitable for wall or island applications
- Three fan speeds with a delayed shut-off that tackles lingering
odors for up to 10 minutes
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
ACCESSORIES (OPTIONAL)
Custom Hood Installation TrimTRIMS248
Remote Control PanelVCI2REMKS
48" Wide Stainless Steel BacksplashPA48JBS
8" Wall CapWC8
10" Wall CapWC10
3 1/4" x 10" Wall CapWC310
Roof Jack and TransitionRJ310
Remote Control Panel
See page 224–225 for accessories.
Grease Filter MaterialWashable Stainless
Grease Filter TypeStainless-Steel
TECHNICAL DETAILS
Watts (W)1,020 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)Direct Wire at
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)99 lbs
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts and Labor2 Year
Hood Body
Steel
Commercial Style
Bafe Filter
120 V
60 Hz
Fixed Connection
Junction Box
5
/16" x 52 1/2" x
14
24 3/4"
30" Electric / 30" Gas
N/A
N/A
N/A
N/A
N/A
VENTILATION – CUSTOM INSERTS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
279
Page 79
VCIB54JP
54-INCH CUSTOM INSERT WITH BLOWER
PROFESSIONAL SERIES
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationIntegrated Motor In
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)40 W
48-i nch mod el VCIB4 8JP shown
FEATURES & BENEFITS
- A unique all in one box solution that includes the hood, a 1,000
CFM blower, liner, bafe lters, lights, transition and a backdraft damper
- Suitable for wall or island applications
- Three fan speeds with a delayed shut-off that tackles lingering
odors for up to 10 minutes
- Auto function senses heat from the cooking surface and adjusts
fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
ACCESSORIES (OPTIONAL)
Custom Hood Installation TrimTRIMS254
Remote Control PanelVCI2REMKS
8" Wall CapWC8
10" Wall CapWC10
3 1/4" x 10" Wall CapWC310
Roof Jack and TransitionRJ310
Remote Control Panel
See page 224–225 for accessories.
Damper IncludedYes
Grease Filter MaterialWashable Stainless
Grease Filter TypeStainless-Steel
TECHNICAL DETAILS
Watts (W)1,020 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)Direct Wire at
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)109 lbs
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)N/A
WARRANTY
Limited Warranty Parts and Labor2 Year
Hood Body
Steel
Commercial Style
Bafe Filter
120 V
60 Hz
Fixed Connection
Junction Box
5
/16" x 58 1/2" x
14
24 3/4"
30" Electric / 30" Gas
N/A
N/A
N/A
N/A
N/A
280
Page 80
VCI230DS
30-INCH CUSTOM INSERT
MASTERPIECE® SERIES
FEATURES & BENEFITS
- Suitable for wall or island applications
- Three fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
®
- Powerfully quiet
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Custom Hood LinerLINER30
Remote Control PanelVCI2REMFS
30" Bafe FilterBAFFLT30
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
8" Wall CapWC8
10" Wall CapWC10
1
/4" x 10" Wall CapWC310
3
Roof Jack and TransitionRJ310
Remote Control Panel
ventilation systems
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationN/A
Number of Lights2
Bulb TypeHalogen
Total Power of the Lamps (W)20 W
Damper IncludedNo
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)40 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)24 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTI1010P* - 1000 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
*Inline blower can be us ed as an integra ted solution. Refer to in stallation for details.
120 V
60 Hz
120V-3 Prong
1
/
8
"
51
5 3/4" / 5 3/4" x 28"
x 18 5/8"
30" Electric / 30" Gas
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VENTILATION – CUSTOM INSERTS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
Bafe Filters
See page 224–225 for accessories.
281
Page 81
VCI236DS
36-INCH CUSTOM INSERT
MASTERPIECE® SERIES
FEATURES & BENEFITS
- Suitable for wall or island applications
- Three fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
®
- Powerfully quiet
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Custom Hood LinerLINER36
Remote Control PanelVCI2REMFS
36" Bafe FilterBAFFLT36
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
8" Wall CapWC8
10" Wall CapWC10
1
/4" x 10" Wall CapWC310
3
Roof Jack and TransitionRJ310
Remote Control Panel
ventilation systems
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationN/A
Number of Lights2
Bulb TypeHalogen
Total Power of the Lamps (W)20 W
Damper IncludedNo
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)40 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)27 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTI1010P* - 1000 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
*Inline blower can be us ed as an integra ted solution. Refer to in stallation for details.
120 V
60 Hz
120V-3 Prong
1
/
8
"
51
5 3/4" / 5 3/4" x
33 5/8" x 18 5/8"
30" Electric / 30" Gas
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
Bafe Filters
See page 224–225 for accessories.
282
Page 82
VCI248DS
48-INCH CUSTOM INSERT
MASTERPIECE® SERIES
FEATURES & BENEFITS
- Suitable for wall or island applications
- Three fan speeds
- Built-in ‘clean lter‘ reminder light illuminates after 40 hours of
operation
- Delayed shut-off tackles lingering odors for up to 10 minutes
®
- Powerfully quiet
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable - EXTNCB25
For use with the following Inline and Remote Blowers: VTR630P,
VTR1030P, VTR1330P, VTI610P, VTI1010P
Custom Hood LinerLINER48
Remote Control PanelVCI2REMFS
48" Bafe FilterBAFFLT48
Roofplates
RFPLT600P - For use with 600 CFM Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
8" Wall CapWC8
10" Wall CapWC10
1
/4" x 10" Wall CapWC310
3
Roof Jack and TransitionRJ310
ventilation systems
GENERAL PROPERTIES
Operating ModeDucted
Number of Speed Settings3-Stage
Motor LocationN/A
Number of Lights4
Bulb TypeHalogen
Total Power of the Lamps (W)20 W
Damper IncludedNo
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
TECHNICAL DETAILS
Watts (W)80 W
Current (A)15 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord / Conduit Length (in)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Required Distance Above Cooktop / Range
Cooking Surface
Diameter of Air Duct (in.) Top10"
Net Weight (lbs)32 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWER OPTIONS
Remote Blowers
(Mounted to Roof or External Wall)
Inline Blowers
(Mounted Between Kitchen and External Wall)
Integrated Blower (Mounted in Hood)VTI1010P* - 1000 CFM
WARRANTY
Limited Warranty Parts and Labor2 Year
*Inline blower can be us ed as an integra ted solution. Refer to in stallation for details.
120 V
60 Hz
120V-3 Prong
1
/
8
"
51
5 3/4" / 5 3/4" x
43 5/8" x 18 5/8"
30" Electric / 30" Gas
VTR630P - 600 CFM
VTR1030P - 1000 CFM
VTR1330P - 1300 CFM
VTI610P - 600 CFM
VTI1010P - 1000 CFM
VENTILATION – CUSTOM INSERTS | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
Remote Control Panel
Bafe Filters
See page 224–225 for accessories.
283
Page 83
CUSTOM INSERTS
9
5/
8
"
7
3/
8
"
88
3/3/
88
""
77
1/1/
44
""
131311//88""
1616
3/3/
44
""
PLANNING INFORMATION
MODEL OPTIONS
Thermador Custom Hood Inserts are available for both professional
and non-professional applications. The Professional Series Custom
Hood Inserts are available in 36-inch, 48-inch, 54-inch and 60-inch
widths. The Masterpiece® Series Custom Hood Inserts are available in
30-inch, 36-inch, and 48-inch widths.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Custom Insert is properly installed and
grounded by a qualied technician. Installation, electrical connections
and grounding must comply with all applicable local codes.
MODELREQUIRED CIRCUIT BREAKER
120V AC, 60 Hz
VCIN36JP15 A
VCIN48JP15 A
VCIN54JP15 A
VCIN60RP15 A
VCIB36JP15 A
VCIB48JP15 A
VCIB54JP15 A
VCI230DS15 A
VCI236DS15 A
VCI248DS15 A
INSTALLATION CONSIDERATIONS
The information in this design guide provides key features, product
dimensions and installation specications. Before installing a
Thermador Custom Hood Insert, be sure to verify the dimensions
and electrical connections. Also, always consult with the installation
manual packed with the product for complete details before
installing.
INSTALLATION OPTIONS
Thermador Custom Hood Inserts may be installed above a Thermador
Range or Cooktop to create a convenient cooking center. Refer to the
ventilation selection guide for compatibility.
Hood installation height above a range or cooktop can vary. To
obtain the necessary installation height above a Thermador Range or
Cooktop, consult the appliance’s installation manual.
Thermador Custom Hood Inserts within custom hood applications
create a seamless design with wall or island applications.
TRANSITIONS
– Included with VCIN__JP models (except 60") and VCIB__JP models
– 10" round downdraft transition
– Required for installation of 1000 and 1300 CFM inline and remote
blowers
– Included with VCIN60RP
284
Page 84
CUSTOM INSERTS
INSTALLATION
VENTILATION – CUSTOM INSERTS | PLANNING INFORMATION & INSTALLATION
VCIN36JP
36-INCH CUSTOM INSERT
CUTOUT FOR INSERT WITHOUT LINER ACCESSORY
VCIN48JP
48-INCH CUSTOM INSERT
CUTOUT FOR INSERT WITHOUT LINER ACCESSORY
CUTOUT FOR INSERT WITH LINER ACCESSORY
LINER236
CUTOUT FOR INSERT WITH LINER ACCESSORY
LINER248
1.800.735.4328 | THERMADOR.COM
285
Page 85
9
5/
8
"
7
3/
8
"
88
3/3/
88
""
77
1/1/
44
""
88
3/3/
44
""
131311//88""
7711//22""
565611//44""
77
//88""
1212
6611//44""
1616
3/3/
44
""
202055//88""
CUSTOM INSERTS
INSTALLATION
VCIN54JP
54-INCH CUSTOM INSERT
CUTOUT FOR 54-INCH CUSTOM INSERT
WITHOUT LINER ACCESSORY
CUTOUT FOR 54-INCH CUSTOM INSERT
WITH LINER ACCESSORY LINER254
VCIN60RP
60-INCH CUSTOM INSERT
CUTOUT FOR 60-INCH
CUSTOM INSERT
WITHOUT LINER
ACCESSORY
AND
CUTOUT FOR 60-INCH
CUSTOM INSERT WITH
LINER ACCESSORY
COMING
SOON
Go to
Thermador.com
for the latest
specications
286
Page 86
CUSTOM INSERTS
5
1
/
8
" (130 mm)
23
7/
8
"
(606 mm)
39
3/
4
"
(1010 mm)
5/
8"
(16 mm)
12
13/
16
"
(325 mm)
24
3/
4
"
(629 mm)
32
3
/
8"
(822 mm)
20
5/
8
"
(524 mm)
23
5/
16
"
(592 mm)
1
1/
2
" (38 mm)
40
1/
2
"
(1029 mm)
39
3
/
16"
(995 mm)
16
5
/
8"
(422 mm)
11
1
/
8"
(283 mm)
4
5
/
16"
(110 mm)
7
11/
16
" (195 mm)
ø 10"
(ø 254 mm)
5
13/
16
"
(148 mm)
10
1
/
4
" (260 mm)
Ausschnitt für Einsatz mit
Liner-Zubehör
LINER236
Ausschnitt für Einsatz ohne
Liner-Zubehör
32
15/
16
"
(836 mm)
21
1/
4
"
(540 mm)
5/
8"
(16 mm)
21
3/
4
"
(553 mm)
INSTALLATION
VENTILATION – CUSTOM INSERTS | INSTALLATION
VCIB36JP
36-INCH CUSTOM INSERT WITH BLOWER
VCIB54JP
54-INCH CUSTOM INSERT WITH BLOWER
VCIB48JP
48-INCH CUSTOM INSERT WITH BLOWER
VCI230DS
30-INCH CUSTOM INSERT
1.800.735.4328 | THERMADOR.COM
CUTOUT FOR INSERT
WITHOUT LINER
ACCESSORY
287
Page 87
CUSTOM INSERTS
INSTALLATION
VCI236DS
36-INCH CUSTOM INSERT
VCI248DS
48-INCH CUSTOM INSERT
CUTOUT FOR INSERT WITHOUT LINER ACCESSORY
CUTOUT FOR INSERT WITHOUT LINER ACCESSORY
288
Page 88
VENTILATION – CUSTOM INSERTS | INSTALLATION
MODELS SHOWN: CIT36XKBB FREEDOM® INDUCTION COOKTOPS, VCI236DS CUSTOM INSERTS, AND BICM24CS COFFEE MACHINE
KITCHEN DESIGN BY: MARC THEE, MARC-MICHAELS INTERIOR DESIGN, INC.
1.800.735.4328 | THERMADOR.COM
289
Page 89
VENTILATION
DOWNDRAFT
290MODELS SHOWN: UCVM36FS 36-INCH DOWNDRAFT WITH CIT365KM INDUCTION COOKTOP
Page 90
DOWNDRAFT
VENTILATION
If you prefer a clean, contemporary design, choose
®
a Thermador
offers space efciency as well as a concealed
look versus an exposed hood. The full-face lter
combines a lter with a splatter shield in one easy-
to-remove, dishwasher-safe element. Thermador
invented the rst retractable downdraft, and was
also the rst to introduce.
FULL 13-INCH RISE
With an over 13-inch intake, the UCVM rises well above
even the tallest pans. This protects against splatters when
cooking and provides better performance in capturing
steam and smoke—even from the front burners.
DOWNDRAFT RECIRCULATION OPTION
Downdraft recirculation is now available for island or wall
applications. Combine the performance of the UCVM
Downdraft with the odor- and grease-capturing lters
in the Recirculation Module for the perfect ventilation
combination for anywhere in your kitchen.
Downdraft Ventilation Unit, which
VENTILATION – DOWNDRAFT | FEATURES & BENEFITS
FULL-FACE FILTERS
Full-face lters combine a lter with a splatter shield in
one easy-to-remove, dishwasher-safe element. These
lters maximize grease capture without affecting airow.
HALOGEN LIGHTS
Bright halogen lighting spotlights your best recipes.
1.800.735.4328 | THERMADOR.COM
THERMADOR EXCLUSIVE
291
Page 91
UCVM30FS
30-INCH DOWNDRAFT VENTILATION
MASTERPIECE® SERIES
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFMBlower Sold Separately
Number of Speed Settings3-Stage
Motor LocationExternal
Damper IncludedNo
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
FEATURES & BENEFITS
- Suitable for wall or island applications
- Downdraft rises over 13" to capture steam from the tallest pots
- Downdraft recirculation possible with module RECIRC36DF
- Three fan speeds
- Dishwasher-safe full-face lters also act as a splatter shield
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable
EXTNCB25 - For use with the following Inline and Remote
Blowers: VTR630P, VTR1030P, VTR1330P, VTI610P, VTI1010P
Recirculation Kit
RECIRC36DF - Includes 2 charcoal lters, 2 venting grids,
and ducting to transition to Integrated Blower (blower sold
separately)
Roofplates
RFPLT600P - For use with Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
Replacement Charcoal Filters
Service Item #291108
See page 223 for accessories.
TECHNICAL DETAILS
Current (A)10 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord Length (in)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Height of the Rise (in.)13"
Diameter of Air Duct (in.) Back10"
Net Weight (lbs)37 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWERS AND TRANSITIONS
Remote Blowers
VTR630P - 600 CFM (Requires Transition CV2T6)
VTR1030P - 1000 CFM (Requires Transition CV2T10)
Inline Blowers
VTI610P - 600 CFM (Requires Transition CV2T6)
VTI1010P - 1000 CFM (Requires Transition CV2T10)
Integrated Blower
VTN600CV2C - 600 CFM
Remote and Inline Blower Downdraft Transitions
CV2T6 - Required for installation of 600 CFM Inline and Remote Blowers
with 6" duct connections
CV2T10 - Required for installation of 1000 CFM Inline and Remote
Blowers with 10" duct connections
WARRANTY
Limited Warranty Parts and Labor2 Year
Recirculating
120 V
60 Hz
120V-3 prong
57"
1
/2" x 30 7/8" x
34
3 3/4"
292
Page 92
UCVM36FS
36-INCH DOWNDRAFT VENTILATION
MASTERPIECE® SERIES
GENERAL PROPERTIES
Operating ModeConvertible: Ducted /
Maximum CFMBlower Sold Separately
Number of Speed Settings3-Stage
Motor LocationExternal
Damper IncludedNo
Grease Filter MaterialWashable Synthetic
Grease Filter TypeMultilayer Cassette
FEATURES & BENEFITS
- Suitable for wall or island applications
- Downdraft rises over 13" to capture steam from the tallest pots
- Downdraft recirculation possible with module RECIRC36DF
- Three fan speeds
- Dishwasher-safe full-face lters also act as a splatter shield
ACCESSORIES (OPTIONAL)
25 ft. Blower Connector Cable
EXTNCB25 - For use with the following Inline and Remote
Blowers: VTR630P, VTR1030P, VTR1330P, VTI610P, VTI1010P
Recirculation Kit
RECIRC36DF -Includes 2 charcoal lters, 2 venting grids,
and ducting to transition to Integrated Blower (blower sold
separately)
Roofplates
RFPLT600P - For use with Remote Blower VTR630P
RFPLT1000P - For use with 1000 CFM Remote Blower
VTR1030P and 1300 CFM Blower VTR1330P
Replacement Charcoal Filters
Service Item #291108
See page 223 for accessories.
TECHNICAL DETAILS
Current (A)10 A
Volts (V)
Frequency (Hz)
Plug Type
Power Cord Length (in)
DIMENSIONS & WEIGHT
Overall Appliance Dimensions
(Width of Canopy Included) (HxWxD) (in)
Height of the Rise (in.)13"
Diameter of Air Duct (in.) Back10"
Net Weight (lbs)42 lbs
ACCESSORIES (REQUIRED)
Blower (Sold Separately)
BLOWERS AND TRANSITIONS
Remote Blowers
VTR630P - 600 CFM (Requires Transition CV2T6)
VTR1030P - 1000 CFM (Requires Transition CV2T10)
Inline Blowers
VTI610P - 600 CFM (Requires Transition CV2T6)
VTI1010P - 1000 CFM (Requires Transition CV2T10)
Integrated Blower
VTN600CV2C - 600 CFM
Remote and Inline Blower Downdraft Transitions
CV2T6 - Required for installation of 600 CFM Inline and Remote Blowers
with 6" duct connections
CV2T10 - Required for installation of 1000 CFM Inline and Remote
Blowers with 10" duct connections
WARRANTY
Limited Warranty Parts and Labor2 Year
Recirculating
120 V
60Hz
120V-3 prong
57"
1
/2" x 36 7/8" x
34
3 3/4"
VENTILATION – DOWNDRAFT | SPECIFICATIONS
1.800.735.4328 | THERMADOR.COM
293
Page 93
DOWNDRAFT
PLANNING INFORMATION
MODEL OPTIONS
Thermador Downdraft Hoods are available in 30 and 36-inch widths
to t your kitchen plans and are meticulously crafted for both function
and design. Be sure to reference the correct model information in this
design guide.
ELECTRICAL SPECIFICATIONS
Be sure your Thermador Downdraft Hood is properly installed and
grounded by a qualied technician. Installation, electrical connections
and grounding must comply with all applicable local codes.
MODELREQUIRED CIRCUIT BREAKER
120V AC, 60 Hz
UCVM30FS10 A
UCVM36FS10 A
INSTALLATION CONSIDERATIONS
The information in this design guide provides key features, product
dimensions, cutouts and installation specications. Before installing a
Thermador Downdraft Hood, be sure to verify the cutout dimensions
and electrical connections. Also, always consult with the installation
manual packed with the product for complete details before
installing.
INSTALLATION OPTIONS
The Thermador Downdraft Hood System is available in 30-inch or
36-inch widths. It is intended for installation with Thermador nonprofessional gas, electric or induction cooktops only.
Thermador Downdraft Hoods may be installed in a wall or island
behind a Thermador non-professional gas, electric or induction
cooktop to create a convenient cooking center. Refer to the
ventilation selection guide for compatibility.
294
Page 94
DOWNDRAFT
INSTALLATION
VENTILATION – DOWNDRAFT | PLANNING INFORMATION & INSTALLATION
UCVM30FS
30-INCH DOWNDRAFT VENTILATION
30 7/8"
(784 mm)
UCVM36FS
36-INCH DOWNDRAFT VENTILATION
36 7/8"
(936 mm)
1.800.735.4328 | THERMADOR.COM
295
Page 95
DOWNDRAFT
36 7/8"
30
7
/8"
36 7/8"
30
7
/8"
INSTALLATION
CUTOUT DIMENSIONS (TOP VIEW)
36 7/8"
7
30
/8"
CUTOUT DIMENSIONS (TOP VIEW)
36 7/8"
7
/8"
30
296
Page 96
36 7/8"
30
7
/8"
CUTOUT DIMENSIONS (TOP VIEW)
36 7/8"
7
30
VENTILATION – DOWNDRAFT | INSTALLATION
DOWNDRAFT
INSTALLATION
/8"
1.800.735.4328 | THERMADOR.COM
297
Page 97
EXPERIENCE
®
THERMADOR
Thermador is committed to giving you an enjoyable, creative and
rewarding cooking experience. Whether you would like to research our
products, watch a video of our chef searing the perfect scallop, or have
questions on the use and care of your product, simply browse our online
resource library at thermador.com.
CONNECT WITH US
B
thermador.com/blog
pinterest.com/thermador
instagram.com/thermadorhome
facebook.com
youtube.com/thermadorhome
twitter.com/thermador
VISIT THE ABOVE SITES TO SHARE
PHOTOS OF YOUR NEW KITCHEN
AND CREATIVE DISHES.
TAKE US WITH YOU
™
Visit the App Store
download our Innovations app, including
the Thermador Kitchen Ideas & Lookbook
and the Thermador Kitchen Design and
Planning Guide.
CUSTOMER SERVICE
For dedicated customer service on
any Thermador product, please call:
1-800-735-4328 or contact us at
thermador.com
or Google Play™ to
432App Store is a trademark of Apple Inc.; Google Play is a trademark of Google Inc.
Page 98
PRODUCT
WARRANTY
PROFESSIONAL RANGES
Limited warranty, entire appliance, parts and labor (2 year)
PROFESSIONAL RANGETOPS
Limited warranty, entire appliance, parts and labor (2 year)
BUILT-IN OVENS
Limited warranty parts and labor (2 year)
INDUCTION COOKTOPS
Limited warranty, entire appliance, parts and labor (2 year)
Limited warranty for glass ceramic surface/electronic
elements and switches; parts only (3rd to 5th year)
GAS COOKTOPS
Limited warranty, entire appliance, parts and labor (2 year)
ELECTRIC COOKTOPS
Limited warranty, entire appliance, parts and labor (2 year)
Limited warranty for glass ceramic surface/electronic
elements and switches; parts only (3rd to 5th year)
VENTILATION
Limited warranty, entire appliance, parts and labor (2 year)
WARMING DRAWERS
Limited warranty, entire appliance, parts and labor (2 year)
BUILT-IN MICROWAVES
Limited warranty, entire appliance, parts and labor (2 year)
REFRIGERATION
Limited two-year warranty, entire appliance, parts and labor
on any part of the refrigerator that fails because of a
manufacturing defect
Limited warranty for sealed refrigeration system*; parts and
labor (3rd to 6th year)
Limited warranty for sealed refrigeration system*; parts only
(7th to 12th year)
* Sealed refrigeration system includes compressor, evaporator, condenser,
dryer/ strainer and connection tubing
DISHWASHERS
Full warranty, entire appliance, parts and labor (2 year)
Limited warranty for microprocessor or printed circuit board;
parts only (3rd to 5th year)
Limited warranty for racks (does not include rack components);
parts only (3rd to 5th year)
Limited warranty for rust-through on inner tub liner; parts only
(Lifetime)
BUILT-IN COFFEE MACHINES
Limited warranty, entire appliance, parts and labor (2 year)
These warranties give you specic legal rights and you may have other rights that vary from state to state. Limited Warranty from Date of Purchase. For complete warranty details, refer to your
Use & Care manual, or ask your dealer.
Specications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specic ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador® indicating the model
number. Specications are correct at time of printing. Thermador reserves the right to change product specications or design without notice. Some models are certied for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.