Thermador VCIB54JP Design Guide

132

MODELS SHOWN: HPCB48NS 48-INCH PROFESSIONAL SERIES CHIMNEY WALL HOOD AND PRD486JDGU 48-INCH PROFESSIONAL SERIES PRO GRAND

DUAL-FUEL RANGE

VENTILATION

PROFESSIONAL & MASTERPIECE

VENTILATION

SERIES

No need to worry about lingering odors or smoke with our elegant, powerful ventilation systems, featuring design accents that complement our Professional Series or our Masterpiece remove smoke, grease and unhealthy airborne contaminants. From standard wall to specialty hoods, downdrafts, island and custom inserts, each model has one thing in common: legendary Thermador performance. These powerful, quiet systems tackle unwanted smoke, grease, heat and odors — quietly and efciently — with ventilation power ranging from 600 to 1,300 CFM.

Collection. These sophisticated ventilation systems

1.800.735.4328 | THERMADOR.COM

133

RANGE, RANGETOP AND VENTILATION MATRIX

PROFESSIONAL SERIES

= PERFECT FIT = VIABLE OPTION

27-INCH DEPTH, 18-INCH TALL

WALL HOODS

24-INCH DEPTH, 18-INCH TALL

WALL HOODS

36" PH36GS

42" PH42GS

48" PH48GS

54" PH54GS

30" PH30HS

36" PH36HS

48" PH48HS

30" HPWB30FS

36-INCH

PRO GRAND

48-INCH

PRO GRAND

27-INCH DEPTH

48-INCH

PRO GRAND STEAM

24-INCH DEPTH, 11-INCH TALL

WALL HOODS

24-INCH DEPTH CHIMNEY

WALL HOODS

ISLAND HOODS

CUSTOM INSERTS

For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.

36" HPWB36FS

48" HPWB48FS

36" HPCN36NS / HPCB36NS

48" HPCN48NS / HPCB48NS

42" HPIN42HS

48" HPIN48HS

36" VCIN36JP / 36" VCIB36JP

48" VCIN48JP / 48" VCIB48JP

54" VCIN54JP / 54" VCIB54JP

134

VENTILATION

30-INCH

PRO HARMONY

36-INCH

PRO HARMONY

24-INCH DEPTH 24-INCH DEPTH

48-INCH

PRO HARMONY

30-INCH

RANGETOP

36-INCH

RANGETOP

48-INCH

RANGETOP

1.800.735.4328 | THERMADOR.COM

135

COOKTOP AND VENTILATION MATRIX

MASTERPIECE® SERIES

36-INCH

INDUCTION/

FREEDOM®

INDUCTION

= PERFECT FIT = VIABLE OPTION

30" HMWN30FS

30-INCH

INDUCTION

30-INCH

GAS COOKTOP

36-INCH

GAS COOKTOP

WALL HOODS

WITH BLOWER

CHIMNEY WALL HOODS

WITH BLOWER

DRAWER HOOD

WITH BLOWER

ISLAND HOODS

WITH BLOWER

48" HMWN48FS

30" HMWB30FS

36" HMWB36FS

36" HMCN36FS

42" HMCN42FS

36" HMCB36FS

42" HMCB42FS

36" HDDW36FS

40" HMIB40HS

42" HPIB42HS

48" HPIB48HS*

136

30" VCI230DS

36" VCI236DS

CUSTOM INSERTS

DOWNDRAFTS

For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers. *Compatible with cooktops of widths up to 42" †Also compatible with Pro Grand Ranges, Pro Harmony Ranges and Professional Rangetops.

48" VCI248DS

30" UCVM30FS

36" UCVM36FS

†

VENTILATION

30-INCH

ELECTRIC COOKTOP

30-INCH SENSOR

ELECTRIC COOKTOP

36-INCH

ELECTRIC COOKTOP

36-INCH SENSOR

ELECTRIC COOKTOP

1.800.735.4328 | THERMADOR.COM

137

BLOWER SELECTION AND DUCT GUIDE

PROFESSIONAL SERIES

Type

Type Model No.

WALL

HOODS

CHIMNEY WALL

HOODS

ISLAND

HOODS

CUSTOM INSERTS

Available

Sizes (Widths)

PH_GS 36" / 42" / 48" / 54"

HPWB_FS

PH_HS 30" / 36" / 48"

HPCN_NS 36" / 48"

HPCB_NS 36" / 48" 1000

HPIN_HS 42" / 48"

VCIB_JP 36" / 48" / 54" 1000

VCIN_JP 36" / 48" / 54"

30" 600

36" / 48" 1200

Blower Information

600

1000

600 1000 1300

600 1000

600 1000 1300

600 1000

600 1000 1300

600 1000

600 1000 1300

600 1000

600 1000 1300

600 1000

CFM

Remote

•

Inline

•

Integrated

•

Model No.

VTN630N 10.3

VTN1030N 13.6

VTR630D 12.1 VTR1030D 14.0 VTR1330E 17.5

VTI610D 12.1

VTI1010D 14.0

Included 3.4 Included 10.2

VTR630D 6.9 VTR1030D 8.8 VTR1330E 12.3

VTI610D 6.9 VTI1010D 8.8 VTN630N 5.0

VTN1030N 8.4

VTR630D 6.9 VTR1030D 8.8 VTR1330E 12.3

VTI610D 6.9

VTI1010D 8.8

VTN1080N 12.7

VTR630D VTR1030D VTR1330E

VTI610D

VTI1010D

Included 12.7

VTR630D 6.9 VTR1030D 8.8 VTR1330E 12.3

VTI610D 6.9 VTI1010D 8.8 VTN630N 10.3

VTN1030N 13.6

Total Amps @

Max 10

Amps

120 Volts, 60 Hz

138

MASTERPIECE® SERIES

30"

WALL

HOODS

CHIMNEY

WALL HOODS

ISLAND HOODS

CUSTOM INSERTS VCI2_DS 30" / 36" / 48"

DOWNDRAFT UCVM_FS 30" / 36"

*Purchase separately at most hardware stores, unless otherwise indicated with a Thermador model number.

HMWN_FS

48"

HMWB_FS 30" / 36" 600

HMCN_FS 36" / 42"

HMCB_FS 36" / 42" 600

HDDW36FS 36" 600

HMIB40HS 40" 400

HPIB_HS 42" / 48" 600

600 600

1000

600

1000

600

1000

600 1000 1300

600 1000

1000

600 1000 1300

600 1000

600 1000 1300

600 1000

600

600 1000

•

••

•

VTN600F 4.6 VTR630D 4.3

VTR1030D 7.8

VTI610D 5.8

VTI1010D 7.6

VTN600F 4.6

VTN1000F 8.8

VTR630D 4.3 VTR1030D 7.8 VTR1330E 9.2

VTI610D 5.8

VTI1010D 7.6

Included 3.4

VTN1080N 5.0

VTR630D 6.7 VTR1030D 7.8 VTR1330E 9.2

VTI610D 5.8

VTI1010D 7.6

Included 4.9 Included 4.9 Included 5.2 Included 5.2

VTR630D 5.2 VTR1030D 7.8 VTR1330E 9.5

VTI610D 5.8

VTI1010D 7.6

VTN600CV2C 6.7

VTR630D 6.7 VTR1030D 10.2

VTI610D 5.8

VTI1010D 7.6

VENTILATION

Duct Size at BlowerRoofplate Required

Transition with

Backdraft Damper

Duct Size at Discharge Discharge Direction

RFPLT600

RFPLT1000

6-Inch

8-Inch

10-Inch

Included

Hood Information

Required*

6-Inch

8-Inch

10-Inch

Vertical

Horizontal

Side & Down

•• •••

•• • •••

••• •••

•••••

•• •••

•• •• •

•• ••

•• • •••

••• •••

•••••

•• •••

•• • ••

••• ••

••••

•• ••

•• • ••

•••••

••••

••• •

•• ••

•• • ••

•• •••

••••

•• ••

Recirculation

Capability

•• • ••

•• •• •

••• ••

••••

•• ••

•• • ••

••• ••

••••

•• ••

•• •• •

• •••

•• •••

• • •••

• •••

••••

•••••

•• • ••

•• •••

••••

••

•••••

••

•

CV2T6

CV2T10

CV2T6

CV2T10

••

1.800.735.4328 | THERMADOR.COM

139

BLOWER OPTIONS AND PRESSURE CURVES

INTEGRATED (MOUNTED IN HOOD)

VTN600CV2C – 600 CFM VTN600F – 600 CFM VTN630N– 600 CFM

VTN1080N– 1000 CFM VTN1000F – 1000 CFM VTN1030N– 1000 CFM

140

BLOWER OPTIONS AND PRESSURE CURVES

REMOTE (MOUNTED TO ROOF OR EXTERNAL WALL)

VTR630D – 600 CFM VTR1030D – 1000 CFM VTR1330E– 1300 CFM

VENTILATION

INLINE (MOUNTED BETWEEN KITCHEN AND EXTERNAL WALL)

VTI610D – 600 CFM VTI1010D – 1000 CFM

NOTE: All measurements are

made with 3 ft. straight duct, 90° bend followed by 1 ft. straight duct. These are NOT free blowing measurements.

1.800.735.4328 | THERMADOR.COM

141

EQUIVALENT DUCT LENGTHS FOR COMMONLY USED TRANSITIONS

DUCT PIECE

Smooth Straight

3 1/4" x 10" Straight

3 1/4" x 14" Straight

90° Elbow Round

45° Elbow Round

3 1/4" x 10" 90° Elbow Round

3 1/4" x 10" 45° Elbow Round

3 1/4" x 10" Flat Elbow

Round to

/4" x 10"

3 1/4" x 10" to Round

Round to

/4" x 10"

3 90° Elbow

SIZE OF DUCT

PIECE (IN.)

6 1.2

7 0.95

8 0.7

10 0.6

N/A 1

N/A 0.7

612

N/A 5

N/A 15

N/A 20

610

EQUIVALENT LENGTH (FT.)

DUCT PIECE

3 1/4" x 10" to Round 90° Elbow

3 1/4" x 10" Center Reverse Elbow Left

3 1/4" x 10" Center Reverse Elbow Right

3 1/4" x 10" Left Reverse Elbow

3 1/4" x 10" Right Reverse Elbow

Round Wall Cap

Round Roof Cap

2' Long

/4" x 10"

Flex

3 1/4" x 10" to Round

7" Inline Backdraft Damper

3 1/4" x 10" Roof Jack and Shutter

NOTE: These commonly used installation parts can be purchased at a local hardware store. Thermador does not manufacture all these parts.

SIZE OF DUCT

PIECE (IN.)

610

N/A 15

N/A 25

N/A 15

N/A 25

10 2

N/A 20

10 1

N/A

EQUIVALENT LENGTH (FT.)

142

VENTILATION

HOODS THAT FIT WITH YOUR KITCHEN

WALL HOODS

Wall hoods offer exceptional, quiet performance and distinctive design options.

• Efcient, high quality, all stainless steel lters

• Halogen lighting

• Deep enclosure area for excellent capture

• Removable dishwasher-safe grease collection tray

• Recirculation option at 600 CFM

CHIMNEY WALL HOODS

Our chimney style wall hoods create a dramatic focal point in the kitchen.

• Adjustable chimney heights suit a range of ceilings

• All stainless steel or stainless steel with glass designs available

• Halogen lighting

VENTILATION

• Dishwasher-safe, stainless steel frame lters

• Automatic Clean Filter Reminder light

ISLAND HOODS

Thermador Island Hoods offer excellent overall efciency in drawing away smoke, moisture and heat.

• An option for when a wall surface is not available

• Dishwasher-safe, stainless steel lters

• Slim and sleek design that does not obstruct the views beyond your kitchen

• Halogen lighting

• All stainless steel or stainless steel with elegant glass canopy design

CUSTOM INSERTS

To create a seamless design with wall or island applications, use custom hood inserts.

• Available options for all types of cooking surfaces

• User-friendly ventilation controls or remote control options

• Wall or island applications

• Halogen lighting

DOWNDRAFTS

Downdraft ventilation offers space efciency and a sleek look for non-professional cooktops.

• Over 13-inch intake

• Full-face lter combines a lter with splatter shield in one easy-to-remove, dishwasher-safe element

• Ideal in island applications

• 600 CFM recirculation kit option with integrated blower is available for difcult-to-duct situations

1.800.735.4328 | THERMADOR.COM 143

144

MODELS SHOWN: PH48HS WALL HOOD AND PRG486GDH PRO HARMONY RANGE AND PA12CVRJ GRIDDLE COVER ACCESSORY

VENTILATION

WALL HOODS

VENTILATION — WALL HOODS

Thermador Wall Hoods put the nishing touch on your cooking system, with deep capture areas for the best overall efciency in drawing away smoke, moisture and heat. These elegant hoods combine style with vigorous performance, generating ventilation power from 600 to 1,300 CFM. Available in a variety of heights, widths and depths, they accommodate your individual venting needs. All models include brilliant halogen lighting for enhanced visibility and convenient speed controls. For ultra-simple cleanup, the removable lters and grease collection trays t easily in your dishwasher.

1.800.735.4328 | THERMADOR.COM

145

WALL HOODS

FEATURES & BENEFITS

HALOGEN LIGHTS

Bright halogen lighting spotlights your best recipes.

DELAYED SHUT-OFF

For the greatest efciency, our Professional ventilation models include delayed shut-off to tackle lingering odors. (Except HMWB30FS, HMWB36FS)

POWERFUL VENTILATION

Breathe deeply with the air-freshening power of up to 1,300 CFM. Our HPWB Series Professional Hood now has blower included for ease of installation.

TIME-TO-CLEAN-FILTER LIGHT

Easy cleanup: all Thermador ventilation lters are dishwasher-safe, and many hoods feature a built-in Time-to-Clean-Filter reminder light. (Except HMWB30FS, HMWB36FS)

BAFFLE FILTERS

Unique low-prole, commercial-style bafe lters maximize grease capture without affecting ow, and they’re dishwasher-safe for easy cleanup.

EXTERIOR CONTROLS

Easy-to-clean, easy-to-use pushbutton controls put accuracy at your ngertips.

KEEP-HOT SHELF

Hold dishes at serving temperature on our optional Keep-Hot Shelf. (Perfect for PH36GS, PH42GS, and PH48GS)

PLANNING INFORMATION

MODEL OPTIONS

When selecting a ventilation system, choose from one of our two sophisticated appliance collections. Select Professional Series for the ultimate in cooking and venting power or the Masterpiece Series for its sleek styling and numerous convenience functions. Thermador Wall Hoods are available in various depths and heights to t your kitchen plans and are meticulously crafted for both function and design. Be sure to reference the correct model information in this design guide.

ELECTRICAL SPECIFICATIONS

Be sure your Thermador Wall Hood is properly installed and grounded by a qualied technician. Installation, electrical connections and grounding must comply with all applicable local codes.

Install a suitable conduit box (not furnished). An appropriatelysized, UL-listed conduit connector must be used to correctly attach the conduit to the junction box. Remote blowers require a 5-wire installation.

REQUIRED

MODEL

PH36GS, PH42GS, PH48GS, PH54GS 15 or 20 Amp

PH30HS, PH36HS, PH48HS 15 or 20 Amp

CIRCUIT BREAKER

120V AC, 60 Hz

146

HPWB30FS, HPWB36FS, HPWB48FS 15 or 20 Amp

HMWN30FS, HMWN48FS 15 or 20 Amp

HMWB30FS, HMWB36FS 15 or 20 Amp

WALL HOODS

PLANNING INFORMATION

VENTILATION — WALL HOODS

INSTALLATION CONSIDERATIONS

The information in this design guide provides key features, product dimensions, cutouts and installation specications. Before installing a Thermador Wall Hood, be sure to verify the cutout dimensions and electrical connections. Also, always consult with the installation manual packed with the product for complete details before installing.

Thermador Wall Hoods may be installed above a Thermador Cooktop or Range to create a convenient cooking center. Refer to the appropriate section for additional specications.

HOOD WIDTH

The hood width should be no less than the width of the cooking surface. Where space is not restricted, a wider hood can be used to increase your capture area.

DISTANCE FROM COOKING SURFACE

Proper mounting height is very important. If a hood is mounted too low, it may be difcult to cook and be unsafe. If a hood is mounted too high, performance may be compromised. For optimal performance, the distance from the cooking surface to the bottom of the hood should be a minimum of 30", unless otherwise noted. Please refer to the installation manual for each hood and cooktop / range model for proper hood mounting heights.

Remote Blowers (VTR Series) Depending on your preference and ducting situation, these blowers can be mounted on the roof or exterior wall of your home. An exterior installation may be more appealing to reduce noise in the kitchen.

Inline Blowers (VTI series) To minimize noise in the kitchen, these blowers are mounted along the duct line anywhere between the kitchen and the exterior wall. If you have easy access to your duct line (in an attic, for example), this may be an appealing option.

Integrated Blowers (VTN series) These blowers are purchased separately and integrated into the hood or onto the downdraft unit at the time of installation. This option allows you to select your ideal hood with the exact power you require. Integrated blowers are included with HPWB30FS, HPWB36FS and HPWB48FS.

CHOOSING THE RIGHT CFM

The power of the cooktop or range, measured in BTU, is perhaps the most important factor in determining CFM needs for a hood.

You should also consider the cooking space and cooking style of your client.

• More demanding cooks usually require more exhaust capacity to handle moisture generated by boiling large pots of water or the grease and smoke resulting from grilling or frying. This cooking style could require a hood or downdraft system with airow of 600 to 1,300 CFM.

• For those who are used to preparing quick meals in a relatively small kitchen, a hood with 600 CFM may be adequate ventilation for the cooking space.

AVAILABLE CEILING HEIGHT

The standard ceiling height can vary from region to region and in homes built in different eras. Ceiling heights, even in the same room, can sometimes vary by as much as several inches. Kitchen ceiling heights can vary between 7'6" (or 90") to over 10' (or 120").

Before selecting a Thermador Hood, check the available installation space and any extra space that may remain after proper installation of a hood and cooktop or range. This extra space can be lled using Thermador’s stainless steel duct cover accessories or integrated with kitchen cabinetry. The space can also be adjusted by raising or lowering your hood within the recommended range (typically 30" to 36" above the cooking surface).

CHOOSING THE CORRECT BLOWER

A variety of interior and exterior blower options (Remote, Inline or Integrated) are available for Thermador’s Professional and Masterpiece Series Hoods. If the unit you have selected does not have a blower, one can be purchased separately. Blower selection will vary based on the volume of air that needs to be moved and the length and location of the duct run. For long duct runs with multiple turns and bends, consider using a more powerful blower. For the most efcient air ow exhaust, use a straight run or as few elbows as possible.

• If the cooking surface is in a peninsula or island, a larger capacity hood can provide better capture when there are cross currents and when the hood needs to be mounted higher. Downdraft ventilation systems are also a good alternative.

• High heat cooking or aromatic foods may require additional CFM. Increasing capture area by 3" on each side is also a recommended way to address this issue.

LENGTH AND SIZE OF DUCTWORK

Do not use exible duct; it creates back pressure / air turbulence and reduces performance.

Straight runs and gradual turns are best. Use the shortest route with the fewest turns possible.

Proper performance is dependent upon proper ducting. Use a qualied and trained installer. Local building codes may require the use of make-up air systems when using ducted ventilation systems greater than specied CFM of air movement. The specied CFM varies from locale to locale. Consult your HVAC professional for specic requirements in your area.

If using a 10" duct, Thermador recommends not exceeding 50 feet of duct. Transitions, elbows and wall or roof caps are all factors that will add more static pressure, therefore increasing your equivalent duct run.

WARRANTY

Limited warranty parts and labor (2 year)

See page 298 for additional warranty details.

1.800.735.4328 | THERMADOR.COM

147

VENTILATION

27-INCH DEPTH WALL HOOD (36"/42"/48"/54")

PH36GS / PH42GS / PH48GS / PH54GS

PERFORMANCE

- Three fan speeds

- Auto function senses heat from the cooking surface and adjusts fan speeds

- Powerfully Quiet ventilation systems

- Extended capture area ensures removal of smoke and odor

PROFESSIONAL

PH36GS – 36-Inch

PH42GS – 42-Inch

PH48GS – 48-Inch

PH54GS – 54-Inch

SPECIFICATIONS

Available Hood Widths 36" / 42" / 48" / 54"

UL Approved for Damp Environments

Blower Sold Separately – See

Duct Size at Discharge 10" Round

Ducting Direction Vertical or Horizontal

Dishwasher-safe Filters Commercial-Style Bafe

Halogen Lighting 120 Volt, 40 Watt Max., G-9 Base, Included

Infrared Keep-Hot Lights PAR-38 175W or PAR-40 250W, Included

Electrical 120V AC, 60Hz

Ye s

Blower Options Table

36"– 2 Bulbs 42" / 48" / 54"– 4 Bulbs

- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of operation

- Delayed shut-off tackles lingering odors for up to 10 minutes

- Dimmer lighting – for a soft lighting effect

- Two Infrared Keep-Hot Lamps hold food warm until serving time

- Dishwasher-safe stainless steel bafe lters

- Dishwasher-safe grease collection trays are easily removed

- Filter systems are highly efcient at capturing grease

- Vertical or horizontal ducting direction

- Seven different blowers to choose from the lineup according to cooking needs

- Choose from Inline, Remote or Integrated Blowers

- Blowers sold separately

- Hood includes lters, backdraft damper and transition

- Approved by CSA / UL for damp environments

DESIGN

- 27" depth hood is a perfect companion to the Pro Grand Professional Range

- Chiseled design for a seamless integration into any kitchen

- Brushed stainless steel nish

- Halogen lighting spotlights your best recipes

- Easy-to-view recessed control panel with stainless steel buttons

- Stainless steel professional bafe lters

148

ACCESSORIES

Keep-Hot Shelf

KHS36QS 36" wide KHS42QS 42" wide KHS48QS 48" wide

– Stainless steel nish – Convenient shelf allows dishes to

keep hot at serving temperature.

– Includes stainless steel backguard

and two shelves.

Duct Cover

Stainless steel duct cover for wall hood applications

Stainless Steel Backsplash

PA36JBS 36" wide PA48JBS 48" wide

Width 6-Inch High 12-Inch High

36-Inch DC36US DCT36US 42-Inch N/A DCT42US 48-Inch DC48US DCT48US

VENTILATION

27-INCH DEPTH WALL HOOD (36"/42"/48"/54")

PH36GS / PH42GS / PH48GS / PH54GS

VENTILATION — WALL HOODS

INSTALLATION OPTIONS

Thermador Wall Hoods may be installed above a Thermador Cooktop or Range to create a convenient cooking center. Refer to the appropriate section for additional specications.

Hood installation height above a cooktop or range can vary. To obtain the necessary installation height above a Thermador Professional Cooktop or Range, consult the appliance‘s installation manual. Accessory 6" and / or 12" tall duct covers are used to ll the space between the hood and ceiling.

Both vertical and horizontal discharge is possible with either mounting method. The hood is shipped ready for vertical discharge.

BLOWER OPTIONS

REMOTE

VTR630D – 600 CFM Use Roofplate RFPLT600

in roof-mount applications

VTR1030D – 1000 CFM Use Roofplate RFPLT1000

in roof-mount applications

VTR1330E – 1300 CFM Use Roofplate RFPLT1000

in roof-mount applications

INLINE

VTI610D – 600 CFM Use WC10 Wall Cap

VTI1010D – 1000 CFM Use WC10 Wall Cap

INTEGRATED

VTN630N– 600 CFM Use WC10 Wall Cap

VTN1030N– 1000 CFM Use WC10 Wall Cap

REMOTE BLOWER ACCESSORIES

Roofplate RFPLT600 For use with Remote Blower VTR630D

Roofplate RFPLT1000 For use with Remote Blowers VTR1030D and VTR1330E

EXTNCB25

25 ft. Blower Connector Cable for use with the following Inline and Remote blowers: VTR630D, VTR1030D, VTR1330E, VTI610D, VTI1010D

ROOF JACK, WALL CAP & TRANSITION

Roof Jack – RJ310 Wall Cap–WC10 Transition

REMOTE (Mounted to roof or external wall)

VTR630D – 600 CFM VTR1030D–1000 CFM VTR1330E – 1300 CFM

HOOD DIMENSIONS

1.800.735.4328 | THERMADOR.COM

INLINE (Mounted between kitchen and external wall)

VTI610D – 600 CFM VTI1010D – 1000 CFM

INTEGRATED (Mounted in hood)

VTN630N– 600 CFM VTN1030N– 1000 CFM

149

VENTILATION

24-INCH DEPTH WALL HOOD (30"/36"/48")

PH30HS / PH36HS / PH48HS

PERFORMANCE

- Three fan speeds

- Delayed shut-off tackles lingering odors for up to 10 minutes

- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of operation

- Filter systems are highly efcient at capturing grease

- Dishwasher-safe grease collection trays are easily removed

- Powerfully Quiet ventilation systems

PROFESSIONAL

PH30HS – 30-Inch

PH36HS – 36-Inch

PH48HS – 48-Inch

SPECIFICATIONS

Available Hood Widths 30" / 36" / 48"

CSA Approved for Damp Environments

Blower Sold Separately – See

Duct Size at Discharge 10"

Ducting Direction Vertical or Horizontal

Dishwasher-safe Filters Commercial-Style

Halogen Lighting 120 Volt, 40 Watt Max., G-9 Base, Included

Electrical 120V AC, 60Hz

Ye s

Blower Options Table

Stainless Steel Bafe Filter

30" / 36"– 2 Bulbs 48"– 4 Bulbs

- Blowers sold separately

- Seven different blowers to choose from the lineup according to cooking needs

- Choose from Inline, Remote or Integrated Blowers

- 10" Round duct size

- Vertical or horizontal ducting direction

- Hood includes lters, backdraft damper and transition

- Approved by CSL for damp environments

DESIGN

- 24" depth hood is 18" tall and a perfect companion with Pro Harmony Ranges and Rangetops

- Chiseled design for a seamless integration into any kitchen

- Brushed stainless steel nish

- Stainless steel control buttons

- Halogen lighting spotlights your best recipes

- Stainless steel professional style bafe lters

- Dishwasher-safe stainless steel bafe lters

- Dimmer lighting – for a soft lighting effect

150

ACCESSORIES

Keep-Hot Shelf

KHS30QS 30" wide KHS36QS 36" wide KHS42QS 42" wide KHS48QS 48" wide

– Stainless steel nish – Convenient shelf allows dishes to

keep hot at serving temperature.

– Includes stainless steel backguard

and two shelves.

Duct Cover

Stainless steel duct cover for wall hood applications

Stainless Steel Backsplash

PA30JBS 30" wide PA36JBS 36" wide PA48JBS 48" wide

Width 6-Inch High 12-Inch High

30-Inch DC30US DCT30US 36-Inch DC36US DCT36US 48-Inch DC48US DCT48US

VENTILATION

24-INCH DEPTH WALL HOOD (30"/36"/48")

PH30HS / PH36HS / PH48HS

VENTILATION — WALL HOODS

INSTALLATION OPTIONS

Thermador Wall Hoods may be installed above a Thermador Cooktop or Range to create a convenient cooking center. Refer to the appropriate section for additional specications.

Hood installation height above a cooktop or range can vary. To obtain the necessary installation height above a Thermador Professional Cooktop or Range, consult the appliance‘s installation manual. Accessory 6" and / or 12" duct covers are used to ll the space between the hood and ceiling.

Both vertical and horizontal discharge is possible with either mounting method. The hood is shipped ready for vertical discharge.

BLOWER OPTIONS

REMOTE

VTR630D – 600 CFM Use Roofplate RFPLT600

in roof-mount applications

VTR1030D – 1000 CFM Use Roofplate RFPLT1000

in roof-mount applications

VTR1330E – 1300 CFM Use Roofplate RFPLT1000

in roof-mount applications

INLINE

VTI610D – 600 CFM

VTI1010D – 1000 CFM

INTEGRATED

VTN630N– 600 CFM Use WC10 Wall Cap

VTN1030N– 1000 CFM Use WC10 Wall Cap

See page 147 for further details.

HOOD DIMENSIONS

48 36" 30"

18 "

12 "

ROOF JACK, WALL CAP & TRANSITION

Roof Jack – RJ310 Wall Cap–WC10 Transition

REMOTE (Mounted to roof or external wall)

VTR630D – 600 CFM VTR1030D–1000 CFM VTR1330E – 1300 CFM

REMOTE BLOWER ACCESSORIES

Roofplate RFPLT600 For use with Remote Blower VTR630D

EXTNCB25

25 ft. Blower Connector Cable for use with the following Inline and Remote blowers: VTR630D, VTR1030D, VTR1330E, VTI610D, VTI1010D

1.800.735.4328 | THERMADOR.COM

Roofplate RFPLT1000 For use with Remote Blowers VTR1030D and VTR1330E

INLINE (Mounted between kitchen and external wall)

VTI610D – 600 CFM VTI1010D – 1000 CFM

INTEGRATED (Mounted in hood)

VTN630N– 600 CFM VTN1030N– 1000 CFM

151

VENTILATION

24-INCH DEPTH WALL HOOD WITH BLOWER (30"/36"/48")

HPWB30FS / HPWB36FS / HPWB48FS

PERFORMANCE

- 600 CFM Integrated Blower included with HPWB30FS; 1,200 CFM Integrated Blower included with HPWB36FS and HPWB48FS

- Recirculation possible with kit RECIRC__FS (max 600 CFM)

- Three fan speeds

PROFESSIONAL

HPWB30FS – 30-Inch

HPWB36FS – 36-Inch

HPWB48FS – 48-Inch

SPECIFICATIONS

Available Hood Widths 30" / 36" / 48"

Blower 30"– 600 CFM Blower

Duct Size at Discharge 10" Round

Ducting Direction Vertical

Dishwasher-safe Filters Low-Prole Bafe

Halogen Lighting 120 Volt, 50 Watt Max., GU10 Base, Not Included

Electrical 120V AC, 60Hz

Included 36"– 1200 CFM Blower Included 48"– 1200 CFM Blower Included

30" / 36"– 2 Bulbs 48"– 3 Bulbs

- Delayed shut-off tackles lingering odors for up to 10 minutes

- Built-in ‘Clean Filter‘ reminder light illuminates after 40 hours of operation

- Dimmer lighting – for a soft lighting effect

- Filter systems are highly efcient at capturing grease

- Grease collection trays are easily removed and dishwasher-safe

- Powerfully Quiet ventilation systems

- 10" Round duct size

- Vertical ducting direction

- Hood includes lters, backdraft damper and transition

- Accessories include: Stainless steel duct covers in 6" or 12" heights

- Replacement charcoal lters available (CHFILT3036)

DESIGN

- Brushed stainless steel nish

- Welded, polished seams for a awless design

- Stainless steel button controls

- Halogen lighting spotlights your best recipes

- Dishwasher-safe low-prole bafe lters

152

ACCESSORIES

Duct Cover

Stainless steel duct cover for wall hood applications

Stainless Steel Backsplash

PA30JBS 30" wide PA36JBS 36" wide PA48JBS 48" wide

Width 6-Inch High 12-Inch High

30-Inch DC30US DCT30US 36-Inch DC36US DCT36US 48-Inch DC48US DCT48US

Recirculation Kit for 30" Hood Only

RECIRC30FS 30" wide

– Stainless steel nish – Perfect for hard to duct installations – Use with 600 CFM blowers only

Replacement Charcoal Filters

CHFILT3036 For use with Recirculation Kit RECIRC_FS

+ 48 hidden pages