Thermador T30IR900SP Maintance Manual
USE & CARE GUIDE
Model/Modele/Modelo
T24IR900SP
GUIDE
D’UTILISATION
ET D’ENTRETIEN
MANUAL DE USO
Y CUIDADO
T30IR900SP
T36IR900SP
Refrigerator
en-us
en Table of contents
en I nst ruc t i on manual
( Important safety instructions . . . . . . . . . . . . 3
Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
About these instructions . . . . . . . . . . . . . . . . . . . . . 3
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Risk of explosion. . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Risk of electric shock . . . . . . . . . . . . . . . . . . . . . . . 3
Risk of injury . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Avoiding placing children and vulnerable
people at risk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
State of California Proposition 65 Warnings . . . . . . 4
Switching key press sound on or off . . . . . . . . . . 14
Setting the key volume . . . . . . . . . . . . . . . . . . . . . 14
Setting the signal tone volume . . . . . . . . . . . . . . . 14
Automatic clean lock . . . . . . . . . . . . . . . . . . . . . . 14
Automatic door opening . . . . . . . . . . . . . . . . . . . . 14
Theater mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Resetting to the factory settings . . . . . . . . . . . . . . 15
Switching demo mode on or off . . . . . . . . . . . . . . 15
Sabbath mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
M Alarm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Door alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8 Intended use . . . . . . . . . . . . . . . . . . . . . . . . . . 5
7 Environmental protection . . . . . . . . . . . . . . . 5
Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Old appliances . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5 Installation and connection . . . . . . . . . . . . . . 5
Contents of package. . . . . . . . . . . . . . . . . . . . . . . . 5
Technical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Installing the appliance . . . . . . . . . . . . . . . . . . . . . . 5
Check built-in cut-out. . . . . . . . . . . . . . . . . . . . . . . . 5
Side-by-side installation . . . . . . . . . . . . . . . . . . . . . . 5
Saving energy . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Before using for the first time . . . . . . . . . . . . . . . . . 7
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . 7
* Getting to know your appliance . . . . . . . . . . 8
Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Operating controls. . . . . . . . . . . . . . . . . . . . . . . . . . 9
Interior fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
1 Operating the appliance . . . . . . . . . . . . . . . . 12
Switching the appliance on . . . . . . . . . . . . . . . . . .12
Switching off and disconnecting the
appliance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the language . . . . . . . . . . . . . . . . . . . . . . .12
Setting the temperature unit . . . . . . . . . . . . . . . . .12
Setting the temperature. . . . . . . . . . . . . . . . . . . . . 12
Super cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Clean lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Eco mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Self-test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Setting the brightness of the control panel . . . . . . 13
U Refrigerator compartment. . . . . . . . . . . . . . 16
Note when storing food . . . . . . . . . . . . . . . . . . . . 16
Note the chill zones in the refrigerator
compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Vegetable container . . . . . . . . . . . . . . . . . . . . . . . 16
Vegetable container with humidity controller . . . . 16
Chill compartment . . . . . . . . . . . . . . . . . . . . . . . . 16
D Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning the display . . . . . . . . . . . . . . . . . . . . . . . 17
Cleaning the appliance interior. . . . . . . . . . . . . . . 17
Cleaning the fittings . . . . . . . . . . . . . . . . . . . . . . . 17
Care instructions for stainless steel surfaces . . . . 17
l Odors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Changing the odor filter . . . . . . . . . . . . . . . . . . . . 17
> Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Normal noises . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Preventing noises . . . . . . . . . . . . . . . . . . . . . . . . . 18
9 Lighting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3 Faults – what to do? . . . . . . . . . . . . . . . . . . 19
Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Ice maker . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4 Customer service. . . . . . . . . . . . . . . . . . . . . 21
Appliance self-test . . . . . . . . . . . . . . . . . . . . . . . . 21
Repair order and advice on faults . . . . . . . . . . . . 21
2
9 Important safety instructions
READ INSTRUCTIONS - DO NOT DISCARD!
(Important safety instructions
Import ant safet y i nstr ucti ons
READ INSTRUCTIONS - DO NOT DISCARD!
Important safety instructions en-us
Definitions
9 WARNING
Non-observance of this warning could
result in death or serious injuries.
9 CAUTION!
Non-observance of this warning could
result in slight or moderately serious
injuries.
NOTICE: Non-observance of this
information could damage the appliance.
Note: This indicates important information and/or tips.
About these instructions
■ Read and follow the operating and
installation instructions. They contain
important information on how to install,
use and maintain the appliance.
■ The manufacturer is not liable if you
disregard the instructions and warnings
in the operating and installation
instructions.
■ Retain all documents for subsequent use
or for the next owner.
Introduction
■ This appliance complies with the relevant
safety regulations for electrical
appliances.
■ The refrigeration circuit has been
checked for leaks.
Risk of explosion
■ Never use electric devices inside the
appliance (e.g. heaters or electric ice
makers).
■ Do not store products which contain
flammable propellants (e.g. spray cans)
or explosive substances in the appliance.
■ Only store high-proof alcohol tightly
closed and standing up.
Risk of electric shock
Improper installations and repairs may put
the user at considerable risk.
■ If the power cord is damaged:
Immediately disconnect the appliance
from the power supply.
■ Do not use multiple outlets, extension
leads or adapters.
■ Before servicing or modifying the
appliance, pull out the power plug or
switch off the circuit breaker.
Before cleaning the appliance, press the
main On/Off switch to switch the
appliance off.
Glass shelves or other fittings can be
safely moved while the appliance is
switched on.
■ Never cut through or remove the third
(ground) conductor of the power cord.
■ Never defrost or clean the appliance with
a steam cleaner. The steam may
penetrate electrical parts and cause a
short circuit.
■ Have the appliance, cable and
accessories repaired or replaced by the
manufacturer, Customer Service or a
similarly qualified person only.
■ Use original parts supplied by the
manufacturer only.
The manufacturer guarantees that these
parts satisfy the safety requirements.
3
en-us Important safety instructions
9 Important safety instructions
READ INSTRUCTIONS - DO NOT DISCARD!
Risk of injury
Containers which contain carbonated drinks
may burst.
Avoiding placing children and vulnerable people at risk
At risk are:
■ Children,
■ People who have limited physical, mental
or sensory abilities,
■ People who have inadequate knowledge
concerning safe operation of the
appliance.
Measures:
■ Never allow children to play with the
appliance.
■ Ensure that children and vulnerable
people have understood the hazards.
■ Supervise children who are cleaning and
maintaining the appliance.
Weight
The appliance is very heavy. The appliance
should always be transported and set up by
at least 2 people.
~ "Installation and connection" on page 5
State of California Proposition 65 Warnings
This product can expose you to chemicals
including vinyl chloride, which is known to
the State of California to cause cancer and
birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
Risk of suffocation
■ If the appliance features a door lock:
keep the key out of the reach of children.
■ Keep children away from the packaging
and its parts.
Damage
To prevent damage:
■ Do not stand or support yourself on the
base, runners or doors.
■ Keep plastic parts and door seals free of
oil and grease.
■ Pull the power cord plug – not the power
cord.
4
Intended use en-us
8Intended use
Intended use
Use this appliance
■ Only for refrigerating food.
■ only in the home and in the home environment.
■ only according to these operating instructions.
This appliance is intended for use at an elevation of
no more than 2000 meters above sea level.
7Environmental protection
Env i r on ment al prot ec t i on
Packaging
All materials are environmentally safe and
recyclable:
■ Dispose of packaging in an environmentally
responsible manner.
■ Please ask your dealer or inquire at your local
authority about current means of disposal.
Old appliances
Valuable raw materials can be reclaimed by
recycling old appliances.
5 Installation and
connection
Install ation and connecti on
Contents of package
After unpacking all parts, check for any damage
during transport.
If you have any complaints, please contact the
dealer from whom you purchased the appliance or
our customer service.
~ "Customer service" on page 21
The delivery consists of the following parts:
■ Built-in appliance
■ Interior fittings (depending on model)
■ Installation material
■ Instruction manual
■ Installation instructions
■ Customer service booklet
■ Guarantee enclosure
■ Information on the energy consumption and
noises
Technical data
Refrigerant, cubic capacity and further technical
specifications can be found on the rating plate.
~ "Getting to know your appliance" on page 8
9 WARNING
CHILDREN MAY BECOME LOCKED IN THE APPLIANCE AND SUFFOCATE!
Before disposing of your old appliance:
■ Remove the door.
■ Leave shelves and containers in the
appliance to prevent children from climbing
in.
■ Keep children away from the discarded
appliance.
9 CAUTION!
REFRIGERANT AND HARMFUL GASES MAY ESCAPE.
Do not damage the tubes of the refrigeration
circuit and insulation.
1. Pull out the power cord plug.
2. Cut through the power cord.
3. Have the appliance disposed of properly.
Installing the appliance
Installation location
The weight of the appliance may be up to 500 kg
depending on the model. The base must be
sufficiently stable and should not give. If necessary,
reinforce the bottom.
Check built-in cut-out
The cut-out must fulfill these criteria:
■ Anti-tilt bracket must be fitted
■ Cut-out depth min. 24” (610 mm), for flush
installation 25” (635 mm)
■ rectangular
■ stable – the side panels and the top must be min.
5/8" (16 mm) thick and securely attached to the
floor or wall
■ Depth of shortest side panels min. 4” (100 mm)
Side-by-side installation
Observe the specifications in the installation
instructions for a side-by-side installation.
If a partition wall is required between the appliances
it must be at least 5/8" (16 mm) wide.
5
en-us Installation and connection
Saving energy
If you follow the instructions below, your appliance will use less power.
Note:
The arrangement of the fittings does not affect the energy consumption of the appliance.
Installing the appliance
Keep the appliance out of direct sunlight. The appliance needs to cool less frequently at low ambient temperaInstall the appliance as far away as possible from heating elements,
cooker and other heat sources:
At least 1¼” (3 cm) from electric or gas cookers.
At least 11¾" (30 cm) from oil or solid-fuel cookers.
NOTICE: If this is not possible, attach an insulating plate between the
appliance and heat source.
Select an installation location at a room temperature of approx. 68 °F
(20 °C).
Do not cover or block the ventilation openings. The appliance needs to cool less frequently if the warm air can
Ventilate the room daily.
Using the appliance
Open the appliance door only briefly. The air in the appliance does not warm up so intensely. The appliance
Transport purchased food in a cool bag and place in the appliance
quickly.
Allow warm food and drink to cool down before placing in the appli-
ance.
Thaw frozen food in the refrigerator compartment to utilize the low
temperature of the frozen food.
Always leave a space between the food and the back panel. The air can circulate and the humidity will remain constant.The appliPack food airtight.
Do not cover or block the ventilation openings. The appliance consumes less power if the warm air can escape.
Vacuum the ventilation openings once a year.
tures and therefore consumes less power.
escape and therefore consumes less power.
needs to cool less frequently and therefore consumes less power.
ance needs to cool less frequently and therefore consumes less
power.
--------
6
Installation and connection en-us
Before using for the first time
1. Remove information material, adhesive tape and
protective foil.
2. Clean the appliance.
~ "Cleaning" on page 17
Electrical connection
9 CAUTION!
Do not connect the appliance to electronic
energy saver plugs.
Note: You can connect the appliance to mainscontrolled and sine-controlled inverters.
Mains-controlled inverters are used for photovoltaic
systems which are connected directly to the national
grid. Sine-controlled inverters must be used for
isolated applications. Isolated applications, e.g. on
ships or in mountain lodges, are not directly
connected to the national grid.
1. After installing the appliance, wait at least 1 hour
before connecting it to prevent damaging the
compressor.
2. Check that the outlet was installed according to
the regulations and complies with the
requirements.
Requirements for outlets
Outlet with 110 V ... 120 V
Protective
conductor
Fuse 10 A ... 16 A
60 Hz
Maximum simultaneous load
Appliance 6 A
3. Connect the appliance to an outlet near the
appliance.
The outlet must also be freely accessible
following installation of the appliance.
9 WARNING
RISK OF ELECTRIC SHOCK!
Never use multiple outlets, extension leads
or adapters.
The appliance must be correctly grounded.
Never cut through or remove the third
(ground) conductor of the power cord.
9 WARNING
RISK OF ELECTRIC SHOCK!
If the length of the power cord is inadequate,
never use multiple outlets or extension
leads. Instead, please contact Customer
Service for alternatives.
7
en-us Getting to know your appliance
*Getting to know your
appliance
Gett i ng to know your appl i anc e
WWLQJV
H
+
3
6
(GLW
%
;
C
K
Appliance
( ... H Operating controls
P Main On/Off switch
X Rating plate
` Vegetable container
h Vegetable container with humidity
controller
)" "Cool-fresh" container
)* Automatic door opening
)2 Ventilation opening
): Rail for suspending the Produce Bin
)B Produce Bin
)J Shelf for large bottles
-
8
Getting to know your appliance en-us
#
+
Operating controls
(GLW
@
0 Touch fields
There are sensors under the touch fields.
Touching the symbol calls up the
respective function.
8 Refrigerator compartment temperature
display
Indicates the set temperature in °C/°F.
@ Cool-fresh compartment temperature
display
Indicates the set temperature in °C/°F.
H " button
Opens the Settings menu.
~ "Settings menu" on page 9
H " button
Opens the menu for changing the
temperature.
6HWWLQJV
Appliance settings menu
This is how to navigate to the "Appliance settings"
menu:
1. Press the " button.
2. Scroll to the left to the Appliance settings menu.
3. Open the menu using the 8 button.
In the Appliance settings menu, you will find the
following sub-menus and setting options:
■ Brightness
■ Key press sound
■ Key volume
■ Signal tone volume
■ Automatic clean lock
■ Automatic door opening
■ Theater mode
■ Temperature unit
■ Language
■ Factory settings
■ Demo mode
■ Sabbath mode
~ "Operating the appliance" on page 12
Settings menu
Press the " button to open the menu.
In the Settings menu, you will find:
■ Appliance settings
■ Cleaning mode
■ Eco mode
■ Self-test
■ Sabbath mode (if activated)
~ "Operating the appliance" on page 12
9
en-us Getting to know your appliance
Interior fittings
(not all models)
Storage compartment
You can remove and adjust the height of the storage
compartments:
1. Lift up the storage compartment and remove.
2. When re-inserting, insert hooks on back of
storage compartment at same height to make it
level.
Note: Insert the storage compartment carefully to
avoid scratching the appliance.
Container
You can remove the container:
■ Press container to the rear,
■ lift the container at the rear and remove.
You can insert the container:
■ Pull out telescopic rails all the way
■ Place the container on the telescopic rails and
push into the appliance until it engages.
Shelf
You can remove and adjust the shelf:
1. Lift shelf and remove.
2. When re-inserting, insert hooks on back of shelf
at same height to make it level.
Note: Insert shelf carefully to avoid scratching the
appliance.
10
Getting to know your appliance en-us
Produce Bin
You can remove the inner container:
■ Open the inner container just a gap.
■ Lift the inner container and remove it.
You can insert the inner container:
■ Guide the suspension of the inner container into
the openings of the outer container.
■ Fold the inner container shut.
You can insert the Produce Bin:
■ Insert the rail for suspending the Produce Bin in
the desired position.
Note: Insert the rail carefully to avoid scratches to
the appliance.
■ Insert the Produce Bin into the rail recesses
provided for this purpose.
You can remove the Produce Bin:
■ Lift the Produce Bin.
■ Lift the rail for suspending the Produce Bin and
remove it.
11
en-us Operating the appliance
1Operating the appliance
Operat i ng the appl i anc e
Switching the appliance on
1. Press the main On/Off switch.
The appliance starts cooling and the light is
switched on when the door is open.
2. Set the required temperature.
~ "Setting the temperature" on page 12
Operating tips
■ When the appliance has been switched on, it may
take several hours until the set temperatures have
been reached. Do not put in any food until the
selected temperature has been reached.
■ The fully automatic NoFrost system ensures that
the freezer compartment remains free of ice.
Defrosting is not required.
■ The front sides of the housing are partly heated
slightly. This prevents condensation in the area
of the door seal.
■ If the freezer compartment door cannot be
immediately re-opened after it has been closed,
wait until the resulting low pressure has
equalized.
Switching off and disconnecting the appliance
Switching off the appliance
■ Press the main On/Off switch.
The appliance is no longer cooling.
Disconnecting the appliance
Setting the temperature unit
You can choose between the unit °C and °F.
1° <=> 1 °F
1 °C <=> 1 °C
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Use < button to move to the menu item
Temperature unit.
5. Press : button.
6. Use < > buttons to move to the required unit.
7. Press 8 button.
The unit will be changed.
8. Press ; button to exit the menu.
Setting the temperature
Recommended temperature
Cooling compartment: +4 °C/+39 °F
Chill compartment: +1 °C/+34 °F
Refrigerator compartment
1. To open the menu for setting the temperature,
press the button ".
2. Use the m button to select the required
compartment.
3. Keep pressing the button +/- until the display
indicates the required temperature.
4. Confirm the selection by pressing the 8 button. If
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
If you do not use the appliance for a prolonged
period:
1. Remove groceries.
2. Press main On/Off switch.
The appliance is no longer cooling.
3. Pull out mains plug or switch off fuse.
4. Leave appliance open.
Setting the language
1. Press " button to open the Settings menu.
2. Use ( button to move to the menu item Appliance
settings.
3. Press 8 button.
4. Press ( button to move to the menu item
Language.
5. Press : button.
6. Use ( ) buttons to move to the required language.
7. Press 8 button.
The display restarts, and the start screen is
displayed.
Cool-fresh container
1. To open the menu for setting the temperature,
press the " button.
2. Use the m button to select the desired
compartment.
3. Keep pressing the +/- button until the display
indicates the required temperature.
4. Confirm the selection by pressing the 8 button. If
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
12
Operating the appliance en-us
Super cooling
Super cooling cools the refrigerator compartment as
cold as possible.
Switch on super cooling, e.g.:
■ Before placing large quantities of food into the
compartment
■ For cooling drinks quickly
Note: When super cooling is switched on, increased operating noises may occur.
After approx. 6 hours, the appliance switches to
normal operation.
Switching on super cooling:
1. To open the menu for setting the temperature,
press the : button.
2. Press the / button.
When super cooling is switched on, the symbol /
appears on the display.
3. Confirm the selection by pressing the 8 button. If
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
Switching off super cooling:
1. To open the menu for setting the temperature,
press the : button.
2. Press the > button.
When super cooling is switched off, the symbol /
disappears from the display.
3. Confirm the selection by pressing the 8 button. If
the button is not pressed, the appliance stores
the setting and automatically returns to the main
screen after a few seconds.
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Press > button to move to the menu item
Automatic clean lock.
5. To change the setting, press : button.
Eco mode
Eco mode switches the appliance to energy-saving
operation.
The appliance automatically sets the following temperatures:
■ Refrigerator compartment: +43° F (6° C)
■ Cool-fresh container: +32° F (0° C)
Switching Eco mode on or off
1. Press the " button to open the Settings menu.
2. Use > button to move to the menu item Eco
mode.
3. Press </= button.
The temperature is changed, and the display shows
the new temperature. When Eco mode is switched
off, the recommended temperature is set.
Note: You can also switch Eco mode on or off by adjusting the temperature with the +/- buttons.
Clean lock
You can use this function to switch off the touch
function of the controls for 10 seconds. During this
time you can clean the display.
~ "Cleaning the display" on page 17
1. Press " button to open the Settings menu.
2. Press < button.
The cleaning display appears, and the countdown
starts.
Self-test
This function can be used to start fault analysis on
your appliance.
~ "Appliance self-test" on page 21
Setting the brightness of the control panel
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Press : button to open the menu item
Brightness.
5. Use < > buttons to set the required brightness.
6. Press 8 button.
The setting is saved.
7. Press ; button to exit the menu.
13
en-us Operating the appliance
Switching key press sound on or off
You can switch the sounds generated when pressing
keys off and back on again.
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Press > button to move to the menu item Key
press sound.
5. Press : button to open the menu item.
6. Use < > buttons to select the required setting.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Setting the key volume
You can adjust the volume level of the sounds
generated when pressing keys.
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Press > button to move to the menu item Key
volume.
5. Press : button to open the menu item.
6. Use < > buttons to select the required setting.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Automatic door opening
The automatic door opening function supports you in
opening the door.
As soon as you activate this function, automatic door
opening moves out and supports you in opening the
door.
9 CAUTION!
Repeatedly closing the door too early will cause
automatic door opening to fail or wear out.
Do not close the door as long as automatic
door opening is still moved out.
If you have however closed the door, leave it
closed for 5 minutes. Automatic door opening
will re-adjust itself.
Open menu item Auto door opening:
1. Press " button to open the main menu.
2. Press ( button to move to the Appliance settings
menu.
3. Press 8 button to open the menu.
4. Press ) button to move the menu item Auto door
opening.
5. To change the setting, press : button.
Switching on Push-to-open system
In an installation situation without handles you can
select the Push-to-open system. Your appliance will
then open a crack if you press lightly on the door.
Note: Please note that automatic door opening is disabled if Sabbath mode is activated.
Setting the signal tone volume
You can adjust the volume level of the signal tones
generated e.g. with alarms.
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Use > button to move to the menu item Signal
tone volume.
5. Press : button to open the menu item.
6. Use < > buttons to select the required setting.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Automatic clean lock
You can use this function to select whether the
automatic clean lock is switched on automatically
when the door is opened.
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Press > button to move to the menu item
Automatic clean lock.
5. To change the setting, press : button.
1. Open menu item Auto door opening.
2. Select menu item Push-to-open system.
3. Press 8 button to open the menu item.
4. Select Opening force. Here you can select the
level of force required to activate automatic door
opening.
5. Select Opening duration. Here you can select
how long the door should remain open a crack
before it closes again automatically.
Note: If the door only remains open a crack, the
appliance checks once a second whether the door
is still ajar.After the selected opening duration
elapses, the appliance will close the door
automatically.
Switching on Pull-to-open system
In an installation situation with handles you can
select the Pull-to-open system. Your appliance will
support you in opening the door as soon as you pull
on the handle.
1. Open menu item Auto door opening.
2. Select menu item Pull-to-open system.
3. Press 8 button to open the menu item.
4. Select Opening force. Here you can select the
level of force required to activate automatic door
opening.
Switching off automatic door opening
1. Open menu item Auto door opening.
2. Select menu item Off.
14
Alarm en-us
Theater mode
If Theater mode is switched on, the light will slowly
become brighter when the appliance is opened, and
then slowly darker when it is closed.
Switching Theater mode on or off
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button to open the menu item.
4. Use > button to move to the menu item Theater
mode.
5. Press : button to open the menu item.
6. Use > button to move to the menu item On or Off.
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Resetting to the factory settings
1. Press " button to open the Settings menu.
2. Press < button to move to the menu item
Appliance settings.
3. Press 8 button.
4. Use < button to move to the menu item Factory
settings.
5. Press : button.
A signal tone sounds, and a message to confirm
reset appears.
6. Press 8 button.
All settings are reset to the factory settings.
7. Press ; button to exit the menu.
Switching demo mode on or off
The cooling function of the appliance is switched off.
All other functions can be used.
Note: Do not store any food items in demo mode as the appliance remains at room temperature.
1. Press " button to open the Settings menu.
2. Use ( button to move to the menu item Appliance
settings.
3. Press 8 button.
4. Press ( button to move to the menu item Demo
mode.
5. Press : button.
6. Use ( ) buttons to select the setting On or Off
7. Press 8 button.
The setting is saved.
8. Press ; button to exit the menu.
Sabbath mode
The appliance switches off the following:
■ Automatic door opening
Note: With handle-free installation, please note that
you will not be supported when opening the door
during this time.
To open the door in this case, reach from below
under the bottom panel of the unit.
■ Ice maker
■ Audible signals
■ Interior light
■ Messages on the control panel
■ Background illumination of control panel is
reduced
Switching Sabbath mode on or off
Displaying Sabbath mode in the Settings menu
To use Sabbath mode, you first have to display the
function in the Settings menu:
1. Press " button to open the Settings menu.
2. Press ( button to move to the Appliance settings
menu.
3. Press 8 button.
4. Press ( button to move to the menu item Sabbath
mode. Press : button.
5. Press ( button to move to the menu item
Available.Confirm by pressing 8 button.
The function is added to the Settings menu.
Switching on Sabbath mode
1. Press " button to open the Settings menu.
2. Press › button to open the view Duration
Sabbath mode.
3. Select one of the presettings, or change the
duration with the +/- buttons.
4. Press < button to start.
The appliance switches all listed functions off.
Switching Sabbath mode off
■ After the selected time elapses, the appliance
switches over to normal operation.
■ To end Sabbath mode before expiry of the
selected time, press = button.
MAlarm
Al ar m
Door alarm
If the appliance door is open for a long time, the
door alarm (continuous audible signal) switches on.
■ Close door.
The audible warning signal is switched off.
15
en-us Refrigerator compartment
URefrigerator
compartment
Refr i ger at or compart ment
The refrigerator compartment is suitable for storing
meat, sausages, fish, dairy products, eggs, ready
meals and pastries.
The temperature can be set from +36 °F (+2 °C)...
+46 °F (+8 °C).
The refrigerator compartment can also be used to
store highly perishable groceries in the short to
medium term. The lower the selected temperature,
the slower the enzymatic and chemical processes
and deterioration by microorganisms. A temperature
of +37 °F (+4 °C) or lower ensures optimum
freshness and safety of the stored groceries.
Note when storing food
Note: Avoid contact between food and the back
panel.
Otherwise, the air circulation will be impaired and
food or packaging may freeze to the back panel.
■ Store fresh, undamaged food.
The quality and freshness will then be retained for
longer.
■ In the case of ready products and bottled goods,
do not exceed the minimum sell-by date or useby date indicated by the manufacturer.
■ To retain aroma, color and freshness, pack
or cover food well before placing it into the
appliance.
This will prevent flavors being transferred
between foods and the plastic parts from
becoming discolored.
■ Leave warm food and drinks to cool down before
placing them into the refrigerator compartment.
Note the chill zones in the refrigerator compartment
The air circulation in the refrigerator compartment
creates different chill zones.
Coldest zone
The coldest zone is in the interior at the back panel
and in the chill compartment.
Note: Store delicate food (e.g. fish, sausages and meat) in the coldest zone.
Warmest zone
The warmest zone is at the very top of the door. Note: Store e.g. hard cheese and butter in the
warmest zone. Cheese can continue to release its
aroma and the butter will still be easy to spread.
Vegetable container
The vegetable container is the optimum storage
location for fresh fruit and vegetables.A high air
humidity keeps leafy vegetables fresh for longer.
Fruit and vegetables should be stored at a slightly
lower air humidity.
Notes
■ Fruit sensitive to cold (e.g. pineapple, banana,
papaya and citrus fruit) and vegetables sensitive
to cold (e.g. eggplant, cucumbers, zucchini,
peppers, tomatoes and potatoes) should be
stored outside of the appliance at temperatures
of approx. +8 °C/+36 °F ... +12 °C/+46 °F for
optimum preservation of quality and aroma.
■ Condensation may form in the vegetable
container depending on the type and quantity of
products stored.
Remove condensation with a dry cloth.
Vegetable container with humidity controller
The vegetable container is the optimum storage
location for fresh fruit and vegetables.You can adjust
the humidity in the vegetable container via the
humidity controller and a special seal. This allows
fresh fruit and vegetables to be stored up to twice as
long as with conventional storage.
The humidity in the vegetable container can be set
according to the type and quantity of products to be
stored:
■ Mainly fruit as well as for a large load – set lower
humidity with controller position FRUIT
■ Mainly vegetables as well as for a mixed or small
load – set higher humidity with controller position
VEGETABLES
Notes
■ For optimum preservation of quality and flavor
store fruit sensitive to cold (e.g. pineapple,
banana, papaya and citrus fruit) and vegetables
sensitive to cold (e.g. eggplant, cucumbers,
zucchini, peppers, tomatoes and potatoes)
outside of the appliance at temperatures of
approx. +46 °F (+8 °C) ... +54 °F (+12 °C).
■ Condensation may form in the vegetable
container depending on the type and quantity of
products stored.
Remove condensation with a dry cloth and adjust
the humidity in the vegetable container with the
humidity controller.
Chill compartment
The chill compartment has lower temperatures than
the refrigerator compartment. Temperatures below
+32 °F (0 °C) may occur.
Ideal for storing fish, meat and sausage. Not suitable
for salads, vegetables and groceries sensitive to
cold.
The temperature in the chill compartment can be
adjusted.
16
Cleaning en-us
DCleaning
Cleani ng
9 CAUTION!
AVOID DAMAGING THE APPLIANCE AND THE FITTINGS.
■ Do not use abrasive, chloride or acidic
cleaning agents or solvents.
■ Do not use scouring or abrasive sponges.
The metallic surfaces may corrode.
■ Never clean the shelves or containers in the
dishwasher.
The parts may become deformed.
Cleaning the display
The change in temperature and humidity can cause
the controls to steam up.
Switch the clean lock on before cleaning.
~ "Clean lock" on page 13
Use a clean micro-fiber cloth for cleaning.
Cleaning the appliance interior
Proceed as follows:
1. Press the main On/Off switch.
2. Take out food and store in a cool location.
Place ice pack (if available) on the food.
3. Clean the appliance with a soft cloth, lukewarm
water and a little pH-neutral washing-up liquid.
lOdors
Odors
If you experience unpleasant odors:
1. Pull out the mains plug or switch off the fuse.
2. Take all food out of the appliance.
3. Clean the inside.~ "Cleaning" on page 17
4. Clean all packaging.
5. Seal strong-smelling food in order to prevent
odors from forming.
6. Switch the appliance on again.
7. Store food in the appliance.
8. Check whether the formation of odors is still
occurring after 24 hours.
9. Change the odor filter.
~ Page 17
Changing the odor filter
Replacement filters are available from your customer
service.
1. Open the filter holder with a slotted screwdriver.
9 CAUTION!
The rinsing water must not run into the light
or through the drainage hole into the
evaporation area.
4. Wipe door seal with clear water and dry
thoroughly with a cloth.
5. Switch appliance back on and put in food.
Cleaning the fittings
To clean, take the variable parts out of the
appliance.
~ "Interior fittings" on page 10
Care instructions for stainless steel surfaces
When taking care of and cleaning stainless steel
surfaces, use only cleaning agents suitable for
stainless steel and a stainless steel cleaning cloth.
You can purchase a suitable stainless steel cleaning
cloth from customer service.
To prevent visible scratches, clean the stainless
steel surface in the direction of the structure.
2. Remove the used odor filter and replace with a
new odor filter.
3. Close the filter holder.
17
en-us Noises
>Noises
Noi s e s
Normal noises
Droning: A motor is running, e.g. refrigerating unit,
ventilator.
Bubbling, buzzing or gurgling: Refrigerant is
flowing through the tubes.
Clicking: Motor, switches or solenoid valves are
switching on or off.
Cracking: Automatic defrosting is running.
Preventing noises
Appliance is not level: Align appliance using a
water level. If required, place a little packing
underneath.
Containers, shelves or storage compartments
wobble or stick: Check the removable fittings and
re-insert if required.
9Lighting
Li ght i ng
Your appliance features a maintenance-free LED
light.
Only customer service or authorized technicians may
repair the light.
18
Faults – what to do? en-us
3 Faults – what to do?
Faul t s – wha t to do?
Before you call customer service, use this table to check whether you can rectify the fault yourself.
Appliance
Temperature differs greatly from the set value.
Switch off appliance for 5 minutes.
~ "Switching off and disconnecting the appliance" on page 12
If the temperature is too warm, check temperature again after a couple of hours.
If the temperature is too cold, check temperature again on the following day.
Displays do not illuminate.
The mains plug has not been inserted properly. Connect the mains plug.
The fuse has tripped. Check the fuses.
The power has failed. Check whether the power is on.
The refrigeration unit is switching on more frequently and for longer.
The appliance was opened frequently. Do not open the appliance unnecessarily.
The ventilation openings are covered up. Remove obstacles.
Large quantities of fresh food have been put in. Switch on super cooling promptly in advance.
Appliance is not cooling, display and lighting are lit.
Demo mode is switched on. Switch demo mode off.
~ "Switching demo mode on or off" on page 15
The door does not open when pressed.
A special mode has switched off automatic door opening. To open the door, reach from below underneath the bottom panel of
the unit or switch off special mode.
~ "Switching Sabbath mode on or off" on page 15
Pull-to-open is switched on. Switch the appliance to Push-to-open.
~ "Automatic door opening" on page 14
The opening force is set too high. Select a lower setting for the opening force.
~ "Automatic door opening" on page 14
The fuse has tripped. Check the fuses.
The power has failed. Check whether the power is on.
--------
19
en-us Faults – what to do?
Ice maker
The ice maker is not functioning.
Ice cube production is switched off. Switch on ice cube production.
Freezer compartment is too warm. Set the temperature lower.
~ "Operating the appliance" on page 12
Ice cube container is not properly inserted. Insert ice cube container fully.
Ice maker without power. Call customer service.
~ "Customer service" on page 21
No water supply. Check water connection and contact technician if necessary.
Low water pressure. Only connect appliance to pipes with sufficient water pressure.
Kink in water hose. Turn off water supply, straighten out kink. Replace water hose, if nec-
essary.
Too few or deformed ice cubes, water pressure lower than usual.
After switching on or removing many ice cubes, there will be too few
in the ice cube container.
Ice cube production stops even though the ice cube container is still
not full.
Low water pressure. Only connect appliance to pipes with sufficient water pressure.
The water filter is blocked or needs to be replaced. Replace water filter.
Freezer compartment is too warm. Set the temperature lower.
It takes around 24 hours for an empty ice cube container to fill up.
Do not store the ice shovel on the ice in the ice cube container. Otherwise, the sensor will not detect the actual fill level of the container.
~ "Operating the appliance" on page 12
Water is leaking out of the appliance.
Water connection is not tight. Check if the connections are fastened firmly and the water hose is
undamaged.
If the water hose is damaged, contact customer service and have it
replaced. Replacement must be performed by customer service or a
similarly qualified person only.Use original parts supplied by the manufacturer only.
--------
20
Loading...