216
MODELS SHOWN: T24IW800SP 24-INCH WINE PRESERVATION COLUMNS WITH TFL24IW800 FLAT STAINLESS STEEL PANELS
AND PROFESSIONAL HANDLES
REFRIGERATION
®
FREEDOM
COLLECTION
FREEDOM REFRIGERATION
Freedom to customize. Freedom to go modular. Freedom to integrate your refrigeration with the design of
your kitchen. That’s what makes Thermador Freedom Refrigeration the leader in true ush, tall door design.
Our refrigeration solutions integrate seamlessly into your kitchen design, with custom fronts and concealed
venting grille.
Our portfolio of custom panel models—available in 18", 24", 30" and 36" widths—offers the most design
choices in the industry, allowing you to con gure your own unique combination of bottom freezers, fresh
food, freezer and wine preservation columns. And nothing beats the convenience of our pre-assembled
bottom freezers, ready to install straight from the factory. Equipped with at stainless steel panels and either
Professional or Masterpiece
built-in t and aesthetics in a 24" or 25" deep cabinet.
True to the Thermador heritage and re-imagined for 2012 with a range of state-of-the-art functionality and
features, the Freedom Refrigeration collection gives you full control to design your personal culinary studio.
2010
Freedom Framed
and Pre-assembled
Collection
®
Handles set off by a removable stainless steel frame, these units deliver perfect
2010
Freedom Framed
and Pre-assembled
Collection
1.800.735.4328 | THERMADOR.COM 217
FREEDOM® COLLECTION
DESIGN INSPIRATION
The Thermador Freedom Collection facilitates a complete range of new and unique possibilities for your cutting-edge kitchen design. Choose
models with custom panels for fully ush integration into the surrounding kitchen cabinetry or pre-assembled bottom freezers for popular,
effortless installations.
All models are stand-alone independent units—use your imagination to arrange them into your kitchen as desired—either as single columns or
in a wide array of possible side-by-side combinations. It’s complete freedom of choice—and freedom of kitchen design.
Side-by-Side T18IW800SP 18-Inch Wine Preservation Columns With TCH18IW800 Chiseled Stainless Steel Panels and Masterpiece Handles. Stand-alone T30IF800SP 30-Inch Freezer Column and
T30IR800SP 30-Inch Refrigerator Column, each with TCH30IR800 Chiseled Stainless Steel Panels and Masterpiece Handles.
218
T36IT800NP French Door Bottom Freezer with TCH36IT800 Chiseled Stainless Steel Panels, Professional Handles and FRAMEKIT10 Stainless Steel Frame.
FREEDOM® COLLECTION
DESIGN INSPIRATION
FREEDOM REFRIGERATION
Stand-alone T24IR800SP 24-Inch Refrigerator Column with TFL24IR800 Flat Stainless Steel Panel and Stand-alone T24IW800SP 24-Inch Wine Preservation Column with Custom Panel, each with
Professional Handles.
T24IW800SP 24-Inch Wine Preservation Column and T36IB800SP 36-Inch Bottom Freezer each with Custom Panels and Handles, Separated by a Partition.
1.800.735.4328 | THERMADOR.COM 219
FREEDOM® COLLECTION, FRESH FOOD COLUMN
FEATURES & BENEFITS
THEATER LED LIGHTING
A new innovation in our Thermador
Freedom Collection, theater LED
lighting illuminates stored items from
both the front and the sides—so that
all food can be seen—and nothing
remains overlooked or forgotten.
Lighting fades in when unit is opened
for a luxurious effect.
DOOR STORAGE
Maximize shelf space with large door
bins, multiple conguration options,
and gallon door storage. Innovative
“cool door” design allows air to
circulate behind door bins, keeping
them as cool as interior shelving.
INTERIOR DESIGN
Our Freedom Fresh Food Collection is beautifully redesigned
to offer a clean, spacious interior look, while silver trim adds a
luxurious accent. New controls feature sleek silver buttons,
fully integrated into the interior design.
INTERIOR RACk SySTEM
The freedom to customize storage like never before with fulllength metal cantilever racking and fully exible rack positions.
PERFECT INSTALLATION
Our new door panel design allows for perfect adjustability. Every
door panel can be adjusted horizontally, vertically, forward and
backward to ensure an ultra-ush installation.
DEDICATED EvAPORATOR & COMPRESSOR SySTEMS
Each column has its own evaporator and compressor to eliminate
odor transfer, keep food fresher, longer, with better humidity and
air ow.
CLIMATE-CONTROLLED DRAwERS
Ensure the perfect storage and
preservation of meats, sh and
produce with dedicated convertible
temperature drawers.
FULL-ExTENSION DRAwERS
Full-extension drawers offer
convenient access. Drawers can even
be opened with a 90° door opening,
accommodating many kitchen
designs. Drawer rails are designed
to glide perfectly even when fully
loaded.
FREEDOM HINGE
Engineered specically for the
Freedom Collection, all units feature
a heavy-duty hinge that can open to
115º, allowing full-height, integrated
doors and Truly Flush Mounted
installation without sacricing
accessibility. The hinge is able to
support virtually any custom wood
panel. See page 240 for details.
™
220
FREEDOM® COLLECTION, FREEZER COLUMN
FEATURES & BENEFITS
THEATER LED LIGHTING
A new innovation in our Thermador
Freedom Collection, theater LED
lighting illuminates stored items from
both the front and the sides—so that
all food can be seen—and nothing
remains overlooked or forgotten.
Lighting fades in when unit is opened
for a luxurious effect.
FULL-wIDTH ICE DRAwER
Ultra capacity ice drawer with exible
ice bin allows you to place the bin
wherever you want it on the left or
right hand side. Entertaining? Simply
remove the ice bin and use the entire
drawer for your ice—stores up to
10 pounds.
FREEDOM REFRIGERATION
INTERIOR DESIGN
Our Freedom Freezer Collection is beautifully redesigned to offer
a clean, spacious interior look, while silver trim adds a luxurious
accent. New controls feature sleek silver buttons, fully integrated
into the interior design.
INTERIOR RACk SySTEM
The freedom to customize storage like never before with fulllength metal cantilever racking and fully exible rack positions.
PERFECT INSTALLATION
Our new door panel design allows for perfect adjustability. Every
door panel can be adjusted horizontally, vertically, forward and
backward to ensure an ultra- ush installation.
DEDICATED EvAPORATOR & COMPRESSOR SySTEMS
Each column has its own evaporator and compressor to eliminate
odor transfer, keep food fresher, longer, with better humidity and
air ow.
HIDDEN ICE MAkER
Hidden compartment houses the ice
maker in an inconspicuous new design.
FULL-ExTENSION DRAwERS AND
OvERSIZED FREEZER BASkETS
Full-extension drawers offer
convenient access. Drawers can
even be opened with a 90° door
opening, accommodating many
kitchen designs. Drawer rails are
designed to glide perfectly even
when fully loaded.
STAINLESS STEEL ExTERIOR ICE
& wATER DISPENSER
An industry rst: our freezer units
offer a fully stainless steel exterior
ice and water dispenser, integrating
perfectly with the Thermador stainless
steel door panels, as well as all other
Thermador stainless steel products.
FREEDOM HINGE
Engineered speci cally for the Freedom Collection, all units
feature a heavy-duty hinge that can open to 115º, allowing fullheight, integrated doors and Truly Flush Mounted™ installation
without sacri cing accessibility. The hinge is able to support
virtually any custom wood panel. See page 240 for details.
1.800.735.4328 | THERMADOR.COM 221
FREEDOM® COLLECTION, BOTTOM FREEZER
FEATURES & BENEFITS
INTERIOR DESIGN
Our Freedom Bottom Freezer Collection is beautifully redesigned
to offer a clean, spacious interior look, while silver trim adds a
luxurious accent. New controls feature sleek silver buttons, fully
integrated into the interior design.
INTERIOR RACk SySTEM
The freedom to customize storage like never before with fulllength metal cantilever racking and fully exible rack positions.
DUAL EvAPORATOR & DUAL COMPRESSOR SySTEMS
Each cooling compartment—refrigerator and freezer—has its own
evaporator and compressor to eliminate odor transfer, keep food
fresher, longer, with better humidity and air ow.
FULL-ExTENSION DRAwERS AND FREEZER BASkETS
Full-extension drawers offer convenient access. Drawers can even
be opened with a 90° door opening, accommodating many kitchen
designs. Drawer rails are designed to glide perfectly even when
fully loaded.
THEATER LED LIGHTING
A new innovation in our Thermador Freedom Collection, theater LED
lighting illuminates stored items from both the front and the sides—
so that all food can be seen—and nothing remains overlooked or
forgotten. Lighting fades in when unit is opened for a luxurious effect.
DELI DRAwER
Complement market-fresh meats, sh and dairy products with a
perfectly chilled full-extension deli drawer.
FREEDOM HINGE
Engineered specically for the Freedom Collection, all units feature a
heavy-duty hinge that can open to 115º, allowing full-height, integrated
doors and Truly Flush Mounted™ installation without sacricing
accessibility. The hinge is able to support virtually any custom wood
panel. See page 240 for details.
PERFECT INSTALLATION
Our new door panel design allows for perfect adjustability. Every door
panel can be adjusted horizontally, vertically, forward and backward to
ensure an ultra-ush installation.
222
DOOR STORAGE
Maximize shelf space in bottom freezers with large door bins,
multiple conguration options, and gallon door storage.
THERMADOR ExCLUSIvE
FREEDOM® COLLECTION, wINE PRESERvATION
FEATURES & BENEFITS
DUAL INDEPENDENT
TEMPERATURE AND
HUMIDITy CONTROL
Store any wine collection at the
perfect temperature and humidity.
Our electronic control board
allows you to adjust each zone
independently—and keeps wines
perfectly preserved.
5-BOTTLE PRESENTER
Inside the appliance an added
aluminum 5-bottle presenter ensures
the best bottles are center stage.
Remove it to double as a handy bar
or tabletop presentation option.
FREEDOM REFRIGERATION
wINE PRESERvATION COLUMNS
Our Freedom Wine Preservation Collection rede nes the home
wine cellar. Perfect for storing and serving at a dinner party
or aging the choicest bottles to perfection, this redesigned
appliance is the wine connoisseur’s newest best friend.
THEATER LED LIGHTING
A new innovation in our Thermador Freedom Collection,
theater LED lighting illuminates each bottle of a precious
wine collection. Lighting fades in when unit is opened for a
luxurious effect.
FREEDOM HINGE
Engineered speci cally for the
Freedom Collection, all units feature
a heavy-duty hinge that can open to
115º, allowing full-height, integrated
doors and Truly Flush Mounted™
installation without sacri cing
accessibility. The hinge is able to
support virtually any custom wood
panel. See page 240 for details.
PERFECT INSTALLATION
Our new door panel design allows for
perfect adjustability. Every door panel
can be adjusted horizontally, vertically,
forward and backward to ensure an
ultra- ush installation.
FULL-ExTENSION ExOTIC wOOD RACkS
Completely redesigned wine storage features new rack spacing and
exible storage options. Luxurious, full-extension exotic wood racks
enhance the experience of pulling out your favorite vintage.
1.800.735.4328 | THERMADOR.COM 223
FREEDOM® COLLECTION
WATERCUBES CRUSHED AGITATIONLOCKLIGHT WATERCUBES CRUSHEDAGITATIONLOCK LIGHT
WATERCUBES CRUSHEDAGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCKLIGHT WATERCUBES CRUSHED AGITATIONLOCKLIGHT WATERCUBES CRUSHEDAGITATIONLOCK LIGHT
WATER CUBES CRUSHED AGITATION LOCK LIGHT
30”
24”
30”
30”
APPLIANCE OvERvIEw
FRESH FOOD COLUMNS wINE PRESERvATION COLUMNS
T24IR800SP
24-Inch
Reversible
Door Swing
Build Your
Custom Column
PLANNING TIP
T30IR800SP
30-Inch
Reversible
Door Swing
Build Your
Custom Column
T18Iw800SP
18-Inch
Reversible
Door Swing
Build Your
Custom Column
T24Iw800SP
24-Inch
Reversible
Door Swing
Build Your
Custom Column
A Frame Kit enables installation of all Freedom Columns in 24-inch deep cutouts. See page 241 for details.
FREEZER COLUMNS
WATERCUBES CRUSHED AGITATIONLOCKLIGHT
WATERCUBES CRUSHED AGITATIONLOCKLIGHT
WATER CUBES CRUSHEDAGITATIONLOCK LIGHT
WATER CUBES CRUSHED AGITATION LOCK LIGHT
224
T18ID800LP
18-Inch
External
Ice & Water
Dispenser
Left-Hand
Door Swing
Build Your
Custom Column
T18ID800RP
18-Inch
External
Ice & Water
T18IF800SP
18-Inch
Dispenser
Right-Hand
Door Swing
Build Your
Custom Column
Reversible
Door Swing
Build Your
Custom Column
T24ID800LP
24-Inch
External
Ice & Water
Dispenser
Left-Hand
Door Swing
Build Your
Custom Column
T24ID800RP
24-Inch
External
Ice & Water
Dispenser
Right-Hand
Door Swing
Build Your
Custom Column
T24IF800SP
24-Inch
Reversible
Door Swing
Build Your
Custom Column
T30IF800SP
30-Inch
Reversible
Door Swing
Build Your
Custom Column
BOTTOM FREEZERS
30” 36” 36”
FREEDOM REFRIGERATION
FREEDOM® COLLECTION
APPLIANCE OvERvIEw
T30IB800SP
30-Inch
2-Door
Reversible
Door Swing
Build Your
Custom Column
T36IB800SP
36-Inch
2-Door
Reversible
Door Swing
Build Your
Custom Column
T36IT800NP
36-Inch
French Door
Build Your
Custom Column
PRE-ASSEMBLED BOTTOM FREEZERS*
T30BB810SS
30-Inch
2-Door
Reversible
Door Swing
Flat Stainless
Steel Panels
Masterpiece®
Handles
*Pre-assembled bottom freezers can be installed ush in 25-inch deep cutouts or with included frame in 24-inch deep cutouts.
1.800.735.4328 | THERMADOR.COM 225
T30BB820SS
30-Inch
2-Door
Reversible
Door Swing
Flat Stainless
Steel Panels
Professional
Handles
T36BB810SS
36-Inch
2-Door
Reversible
Door Swing
Flat Stainless
Steel Panels
Masterpiece
Handles
T36BB820SS
36-Inch
2-Door
Reversible
Door Swing
Flat Stainless
Steel Panels
Professional
Handles
T36BT810NS
36-Inch
French Door
Flat Stainless
Steel Panels
Masterpiece
Handles
T36BT820NS
36-Inch
French Door
Flat Stainless
Steel Panels
Professional
Handles
FREEDOM® COLLECTION
30”24”18”
36”
T30IR800SP
T36IT800NP
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T36IT800NP
30”24”18”
36”
T36IB800SP
T36IT800NP
TCH360IT800
30”24”18”
36”
T36IB800SP
T36IT800NP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
TFL24IR800
TFL30IR800
TCH24IR800
TCH30IR800
TFL24ID800
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
TFL24IR800
TFL30IR800
TCH24IR800
TCH30IR800
TCH24ID800TCH18ID800
TFL24ID800
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IT800NP
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
TFL24IR800
TFL30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IB800SP
T36IT800NP
T24ID800RPT18ID800RP
T24ID800LPT18ID800LP
TFL24IR800
TFL30IR800
TCH24IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IT800NP
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T30IR800SP
T36IB800SP
T36IT800NP
TFL30IR800
TCH30IR800
T30IB800SP
TCH360IT800
30”24”18”
36”
T36IT800NP
30”24”18”
36”
T36IB800SP
T36IT800NP
TCH360IT800
30”24”18”
36”
T36IB800SP
T36IT800NP
TCH360IT800
BUILDING yOUR CUSTOM COLUMN
1
CHOOSE UNIT
(All units are panel-ready for custom
2
CHOOSE PANEL
panel installation)
3
CHOOSE HANDLE
AND OPTIONAL FRAME
NOTE: Choose one handle for
each column, 2 handles for each
2-door bottom freezer and
3 handles for each French
Door bottom freezer.
FRESH FOOD COLUMN–FULLy FLUSH COLLECTION
24"
30"
FREEZER COLUMN–FULLy FLUSH COLLECTION
18"
18"
24"
24"
T24IR800SP
Reversible
Swing
Custom
Column
T30IR800SP
Reversible
Swing
Custom
Column
T18ID800RP
Right-Hand
Swing
External
Dispenser
Custom
Column
T18IF800SP
Reversible
Swing
Internal
Ice Maker
Custom Column
T24ID800RP
Right-Hand
Swing
External
Dispenser
Custom
Column
T24IF800SP
Reversible
Swing
Internal
Ice Maker
Custom Column
T18ID800LP
Left Hand
Swing
External
Dispenser
Custom
Column
T24ID800LP
Left Hand
Swing
External
Dispenser
Custom
Column
TFL24IR800
Flat
Stainless Steel
TFL30IR800
Flat
Stainless Steel
TFL18ID800
Flat
Stainless Steel
with Dispenser
TFL18IR800
Flat
Stainless Steel
TFL24ID800
Flat
Stainless Steel
with Dispenser
TFL24IR800
Flat
Stainless Steel
TCH24IR800
Chiseled
Stainless Steel
TCH30IR800
Chiseled
Stainless Steel
TCH18ID800
Chiseled
Stainless Steel
with Dispenser
TCH18IR800
Chiseled
Stainless Steel
TCH24ID800
Chiseled
Stainless Steel
with Dispenser
TCH24IR800
Chiseled
Stainless Steel
PR36HNDL10
36-Inch Professional Handle
Coordinates with Thermador
Professional Series appliances
MS36HNDL10
36-Inch Masterpiece
Coordinates with Thermador
Masterpiece Series appliances
WATERCUBES CRUSHEDAGITATION LOCKLIGHT
FRAMEKIT10
This accessory enables installation
in 24-inch deep cutouts. Kit
includes two identical and
reversible vertical frames.
®
Handle
226
30"
IMPORTANT: Use a sealing kit when connecting refrigerator and freezer columns side-by-side (included with every freezer column). Use HEATRKIT10 for all non-traditional side-by-side
combinations, installations where columns are not connected but less than six inches (152 mm) from one another and for any installation in areas subject to excessive humidity. See page
241 for details
T30IF800SP
Reversible
Swing
Internal
Ice Maker
Custom Column
TFL30IR800
Flat
Stainless Steel
TCH30IR800
Chiseled
Stainless Steel
FREEDOM® COLLECTION
30”24”18”
36”
T36IB800SP
T36IT800NP
36”
36”
36”
30”24”18”
36”
T24IR800SP
T30IR800SP
T36IT800NP
30”24”18”
36”
T30IR800SP
T36IT800NP
30” 36” 36”
BUILDING yOUR CUSTOM COLUMN
FREEDOM REFRIGERATION
1 2
BOTTOM FREEZER–FULLy FLUSH COLLECTION
30"
36"
36"
T30IB800SP*
2-Door
Custom Unit
T36IB800SP
2-Door
Custom Unit
T36IT800NP
French Door
Custom Unit
wINE PRESERvATION–FULLy FLUSH COLLECTION
18"
T18IW800SP
Reversible
Swing
Custom
Column
TFL30IB800*
Flat
Stainless Steel
TFL36IB800
Flat
Stainless Steel
TFL36IT800
Flat
Stainless Steel
TFL18IW800
Flat
Stainless Steel
Reversible
Swing
TCH30IB800*
Chiseled
Stainless Steel
TCH36IB800
Chiseled
Stainless Steel
TCH36IT800
Chiseled
Stainless Steel
TCH18IW800
Chiseled
Stainless Steel
Reversible
Swing
3
PR36HNDL10
36-Inch Professional Handle
Coordinates with Thermador
Professional Series appliances
MS36HNDL10
36-Inch Masterpiece
Coordinates with Thermador
Masterpiece Series appliances
* This appliance requires one
36-inch handle for the door and
one 30-inch handle for the
bottom freezer drawer.
PR30HNDL10
30-Inch Professional Handle
MS30HNDL10
30-Inch Masterpiece Handle
WATERCUBES CRUSHEDAGITATION LOCKLIGHT
®
Handle
24"
PRE-ASSEMBLED BOTTOM FREEZERS
30"
36"
36"
IMPORTANT: Use a sealing kit when connecting refrigerator and freezer columns side-by-side (included with every freezer column). Use HEATRKIT10 for all non-traditional side-by-side
combinations, installations where columns are not connected but less than six inches (152 mm) from one another and for any installation in areas subject to excessive humidity. See page
241 for details
1.800.735.4328 | THERMADOR.COM 227
T24IW800SP
Reversible
Swing
Custom
Column
T30BB810SS
2-Door
Flat Stainless Steel Panels
Masterpiece Handles
Removable Frame
T36BB810SS
2-Door
Flat Stainless Steel Panels
Masterpiece Handles
Removable Frame
T36BT810NS
French Door
Flat Stainless Steel Panels
Masterpiece Handles
Removable Frame
TFL24IW800
Flat
Stainless Steel
Right-Hand
Swing
T30BB820SS
2-Door
Flat Stainless Steel Panels
Professional Handles
Removable Frame
T36BB820SS
2-Door
Flat Stainless Steel Panels
Professional Handles
Removable Frame
T36BT820NS
French Door
Flat Stainless Steel Panels
Professional Handles
Removable Frame
TCH24IW800
Chiseled
Stainless Steel
Right-Hand
Swing
FRAMEKIT10
This accessory enables installation
in 24-inch deep cutouts. Kit
includes two identical and
reversible vertical frames.
A frame is attached to all
pre-assembled models. It is
removable if a ush installation
in a 25" deep cabinet is desired.
FREEDOM® COLLECTION
PLANNING CHECkLIST
This custom product requires attention to the nest details. Did you remember to…?
Choose a desired conguration – side-by-side or stand-
alone columns (See pages 233-237 for details)
Plan the cutout height(s) – 84" (See pages 233-237 for details)
Plan the cutout width(s) – depends on conguration and
column width (See pages 233-237 for details)
Plan the cutout depth – 25" for North American style cabinets,
24" with installation frame accessory, 24" for European style
cabinets (See pages 233-237 for details)
Ensure the cutout interior (top and sides) is ush to the
appliance at a depth of min. 4", preferably 6" from face frame
(See pages 233-237 for details)
Ensure the cutout interior returns (top and sides) are nished
to match exterior at a depth of min. 4", preferably 6" from
face frame (See pages 233-237 for details)
Ensure proper clearance for appliance doors including
handle(s) – check for interference with other appliances,
open or closed cabinets and doors, nearby walls (See page
230 for details)
Properly site the electrical outlet and (if applicable) water box
(See page 232 for details)
Ensure the reverse of any custom panel is nished to match
the exterior
Choose the handle style – Professional (PR36HNDL10),
Masterpiece® (MS36HNDL10) or custom
Choose the correct handle length – normally PR36HNDL10
or MS36HNDL10 – shorter handle (PR30HNDL10 or
MS30HNDL10) for 30" bottom freezer (T30IB800SP)
drawer only
Choose the toekick style – stainless (included with appliance)
or design custom toekick(s) (See page 238 for details)
Procure the proper installation accessories – stainless steel
frame kit (FRAMEKIT10) for framed installations in 24-inch
deep cutouts, heater kit (HEATRKIT10) for uncommon side-bysides (any combination not involving a freezer column) heater
kit for installations of columns that are not side-by-side, but six
inches or closer to one another, heater kit for humid areas (any
conguration or installation type) (See page 241 for details)
If applicable, procure the proper water lter accessories –
additional replacement lters (REPLFLTR10), lter by-pass
(SCRNFLTR10) for in-home water ltration system (See page
241 for details)
228
Choose the door panel type – at (TFL series) or chiseled
(TCH series) stainless steel accessory panels or design custom
panel(s) (See page 240 for details)
FREEDOM® COLLECTION
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
SUGGESTED COMBINATIONS
Thermador‘s Freedom Collection uses independent columns that create unlimited exibility in both function and design. Some suggested
pairings are listed below. A special kit is included with all freezer columns to simplify traditional side-by-side refrigerator/freezer combinations.
When combining two appliances where one is not a freezer column or if any two units are installed less than 6" (152 mm) apart from one
another but not connected side-by-side, always use the Heater Kit (HEATRKIT10) to guard against damaging condensation build-up.
42-INCH
FREEDOM REFRIGERATION
18-Inch
Freezer
Column
T18IF800SP
24-Inch
Fresh Food
Column
T24IR800SP
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
18-Inch
Freezer
Column
T18ID800LP
24-Inch
Fresh Food
Column
T24IR800SP
18-Inch
Freezer Column
T18IF800SP
24-Inch
Fresh Food
Column
T24IR800SP
Shown with
FRAMEKIT10
18-Inch
Freezer Column
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
T18ID800LP
24-Inch
Fresh Food
Column
T24IR800SP
Shown with
FRAMEKIT10
48-INCH
18-Inch
Freezer
Column
T18IF800SP
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
30-Inch
Fresh Food
Column
T30IR800SP
24-Inch
Freezer Column
T24IF800SP
24-Inch
Fresh Food
Column
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
T24IR800SP
Shown with
FRAMEKIT10
18-Inch
Freezer
Column
T18ID800LP
30-Inch
Fresh Food
Column
T30IR800SP
24-Inch
Freezer Column
T24ID800SP
24-Inch
Fresh Food
Column
T24IR800SP
Shown with
FRAMEKIT10
24-Inch
Freezer
Column
T24IF800SP
24-Inch
Fresh Food
Column
T24IR800SP
30-Inch*
2-Door
Bottom Freezer
T30IB800SP
18-Inch*
Wine
Preservation
Column
T18IW800SP
24-Inch
Freezer
Column
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
T24ID800LP
24-Inch
Fresh Food
Column
T24IR800SP
54-INCH
24-Inch
Freezer
Column
T24IF800SP
WATERCUBES CRUSHED AGITATIONLOCK LIGHT
30-Inch
Fresh Food
Column
T30IR800SP
24-Inch
Freezer
Column
T24ID800LP
30-Inch
Fresh Food
Column
T30IR800SP
36-Inch*
2-Door
Bottom Freezer
T36IB800SP
18-Inch*
Wine
Preservation
Column
T18IW800SP
30-Inch*
2-Door
Bottom Freezer
T30IB800SP
24-Inch*
Wine
Preservation
Column
T24IW800SP
60-INCH
30-Inch
Freezer
Column
T30IF800SP
30-Inch
Fresh Food
Column
T30IR800SP
1.800.735.4328 | THERMADOR.COM 229
36-Inch*
2-Door
Bottom Freezer
T36IB800SP
24-Inch*
Wine
Preservation
Column
T24IW800SP
30-Inch*
2-Door
Bottom Freezer
T30IB800SP
30-Inch*
2-Door
Bottom Freezer
T30IB800SP
*Requires Heater Kit HEATRKIT10
FREEDOM® COLLECTION
INSTALLATION OPTIONS
The Freedom Collection offers a variety of installation possibilities*. In some instances, special accessories are required.
RECOMMENDED INSTALLATIONS CONSIDERATIONS
STANDALONE
SIDE-By-SIDE When two appliances are installed side-by-side a sealing kit must be
SPLIT
COLUMNS
wITH
PARTITION
Any Freedom appliance can be installed as a stand-alone unit. Ensure
a cutout ush to the appliance at a depth of minimum 4" (102 mm),
preferably 6" (152 mm) on the top and sides.
used. For combinations that involve a freezer column, this kit is
provided. For all other (non-traditional) side-by-side combinations
or instances where any appliances are installed less than 6" (152 mm)
apart from one another but not connected side-by-side, purchase the
Heater Kit (HEATRKIT10).
When dimensioning the partition, note the thickness of the door
panel (including handles) as well as the swivel range to prevent
damage if the doors are opened at the same time. (See page 239
for details on door swivel range dimensions)
Three appliances can be installed together only if a partition—
minimum 5/8" (16 mm)—is placed between two of the appliances.
Ensure that door panel thickness (including handles) as well as the
swivel range are accounted for.
AT THE
END OF A
CABINETRy
RUN
NOT RECOMMENDED CONCERNS
*The Thermador warranty shall apply only to recommended installations.
All Freedom appliances must be completely enclosed on the top and
sides. If one side of the appliance is visible, a decorative side panel
must be used. The side panel must be connected rmly to the wall,
the oor and any overhead furniture/ xtures before the appliance is
placed in the cutout.
It is absolutely essential to ensure that the appliance is installed in
such a way that the doors do not interfere with an adjacent wall or
other kitchen elements. (See page 239 for details on door swivel
range dimensions)
A partition—minimum 5/8" (16 mm)—is required to ensure the doors
do not interfere with one another when opened. Use a partition to
separate appliances and observe the door swivel range. (See page
239 for details on door swivel range dimensions)
A Thermador French Door Bottom Freezer cannot be connected
side-by-side with any other appliance. Use a partition to separate
appliances and observe the door swivel range. (See page 239 for
details on door swivel range dimensions)
230
FREEDOM® COLLECTION
PLANNING INFORMATION
FREEDOM REFRIGERATION
INSTALLATION CONSIDERATIONS
LOCATION
The appliance should be installed in a dry, ventilated
room. It may not be installed outdoors. The ambient
temperature of the room must be between 55°F
(13°C) and 100°F (43°C).
The appliance should not be exposed to constant
direct sunlight or excessive heat. If installation next
to a heat source, such as an oven, radiator, etc. is
unavoidable, use a suitable insulating plate or observe
the following minimum distances from the heat source:
– 1 1/4" (30 mm) from an electric cooking appliance,
– 11 13/16" (300 mm) from an oil or solid-fuel cooking
appliance.
INSTALLATION AND CUTOUT DIMENSIONS
Please see pages 233-237 for complete cutout
planning information.
It is important to observe the speci ed dimensions of
the installation cutout for a trouble-free installation of
the appliance and for the subsequent appearance of
the door panel.
– In particular ensure that the cutout is square.
Squareness can be checked by suitable means, e.g.
spirit level, diagonal measurements, etc.
– The side walls of the cutout must be ush. The
minimum thickness of the side and top walls is
(16 mm). The minimum thickness of toekick panel
is 1/4" (6 mm).
5
/8"
FURNITURE/FIxTURES
During installation, the appliance is fastened to adjacent and overhead
furniture/ xtures and it is therefore essential that all such furniture/ xtures are
well secured to the substructure or adjacent wall.
FLOORING/SUBSTRUCTURE
On account of the heavy weight of a fully loaded appliance, a load-bearing
substructure is required. To ensure correct installation and function, the
support must be at, level and made of hard, rigid material. If in doubt,
contact an architect or a building expert.
Refer to the following table for load-bearing capacity:
APPLIANCE LOAD BEARING CAPACITy
24-Inch Fresh Food Column 890 lbs. / 400 kg
30-Inch Fresh Food Column 1,110 lbs. / 500 kg
18-Inch Freezer Column 560 lbs. / 250 kg*
24-Inch Freezer Column 780 lbs. / 350 kg*
30-Inch Freezer Column 950 lbs. / 425 kg
30-Inch Bottom Freezer 900 lbs. / 410 kg
36-Inch Bottom Freezer 1,200 lbs. / 540 kg
*Without water dispenser
wARRANTy
Limited two-year warranty—for two years from the date of
original purchase, we will provide, free of charge, parts and
service labor in your home to repair or replace any part of the refrigerator
that fails because of a manufacturing defect.
Limited warranty on sealed refrigeration system**; parts and labor
(3rd–6th year)
Limited warranty on sealed refrigeration system; parts only (7th–12th year)
See page 308 for additional warranty details.
** Sealed refrigeration system includes compressor, evaporator, condenser, dryer/strainer and
connecting tubing
1.800.735.4328 | THERMADOR.COM 231
FREEDOM® COLLECTION
PLANNING INFORMATION
ELECTRICAL SPECIFICATIONS
The appliance comes with a 3-wire power supply cord.
UL listed in the USA.
The appliance requires a 3-wire receptacle that is tted with
a 15 Amp fuse or higher. Refer to the following table for max
load details.
APPLIANCE MAx LOAD
240/208V AC, 60Hz
24-Inch Fresh Food Column 1.50 Amps
30-Inch Fresh Food Column 1.50 Amps
18-Inch Freezer Column* 3.06 Amps
24-Inch Freezer Column* 3.70 Amps
30-Inch Freezer Column* 4.20 Amps
30-Inch 2-Door Bottom Freezer* 4.90 Amps
36-Inch 2-Door Bottom Freezer* 4.90 Amps
36-Inch French Door Bottom Freezer* 4.90 Amps
18-Inch Wine Preservation Column 0.81 Amps
24-Inch Wine Preservation Column 0.90 Amps
*Including ice maker
The receptacle must be installed by a licensed electrician only.
For the installation position of the receptacle refer to diagram
in ”Electrical Location“.
GROUNDING INSTRUCTION
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk of
electric shock by providing a path of least resistance for the
electric current.
ADDITIONAL GROUNDING PROCEDURE
Some local regulations may require a separate ground. In such
cases, the required accessory ground wire, clamp and screw
must be purchased separately. Never ground the appliance to
plastic plumbing lines, gas lines or water pipes.
ELECTRICAL LOCATION
SPLIT COLUMN INSTALLATION
18-Inch 24-Inch 30-Inch
X 18" (457 mm) 24" (610 mm) 30" (762 mm)
Y 9" (229 mm) 12" (305 mm) 15" (381 mm)
SIDE-By-SIDE INSTALLATION
wATER LOCATION
A cold water connection is required for appliances that feature
an ice maker or an ice and water dispenser.
The water pressure must be between 40 and 120 p.s.i. (2.75-
8.25 bar). The installation must comply with local plumbing
regulations.
A separate shut-off valve must be installed for the appliance
water connection.
The shut-off valve for the water connection may not be behind
the appliance. It is recommended to place the shut-off valve
outside the cutout next to the appliance or in another easily
accessible location. When installing the water connection,
observe the permitted installation areas for the water supply line.
The supply line can be located to the right (a), to the left (b), or
underneath (c).
232
A 4-conductor cord shall be used when the appliance
is installed in an area where local codes do not permit
grounding through the neutral. Power supply cord must be
replaced by a licensed electrician only.
wARNING
Improper connection of the equipment grounding conductor
may result in electric shock. Have the appliance checked by a
qualied electrician or service technician if you are in doubt as
to whether the appliance has been properly grounded.
FREEDOM® COLLECTION
FREEDOM REFRIGERATION
PLANNING INFORMATION
FREEDOM REFRIGERATION
CABINETRy TERMS & BASIC
REQUIREMENTS
To clarify the terms that are used in this design guide,
please refer to the following de nitions:
CASE
This is the main body of a kitchen cabinet.
(CABINET) FACE FRAME
This is a decorative frame at the front of a kitchen
cabinet representing the space between cabinetry
doors or drawers and is typical for North America.
European style cabinets (frameless cabinetry) typically
do not have a face frame.
DOOR PANEL
Able to be fully ush integrated when installed in
25" (635 mm) deep cabinets, Freedom Collection
refrigerators are intentionally designed to be
equipped with custom door panels that perfectly
match surrounding kitchen cabinetry. Typical panel
thickness is 3/4" (19 mm). However, thicker panels can
be accommodated to emulate the look of the visible
face frame (as in overlay) or to match existing kitchen
cabinetry doors. When using custom panels, always
ensure that the panel reverse is nished to match the
exterior, as parts of the panel reverse will be visible
when the refrigerator door is opened.
CUTOUT (NICHE)
The cutout is the cavity in which a Freedom Collection appliance is installed.
The width of the cutout (18-inch, 24-inch, 30-inch, etc.) is dependent on the
appliance(s). The total depth of the cutout is equal to the depth of the case
plus face frame. It does not necessarily include the thickness of the door
panel. For proper planning of cutout depth, please refer to pages 233-237.
Typically, the cutout for a Freedom Collection appliance will be 25" (635 mm)
deep. When planning the cutout, it is essential that the top and side interior
walls be ush to the appliance at a minimum depth of 4" (102 mm) from the
outer edge of the face frame and composed of thick (5/8" (16 mm) minimum)
material for secure installation. Also, because the case interior will be partially
visible when the refrigerator door is opened, always ensure that the top and
side returns are nished to match the exterior furniture at the same minimum
depth of 4" (102 mm).
kITCHEN CABINETRy ILLUSTRATION
Face Frame Cabinet
(North American Style)
Case
Face
Frame
Standard Overlay
Door Panel
24”
Appliance
Full Overla
25”
Cutout depth
y
24”
Appliance
25”
Cutout depth
Offset Flush Inset
24”
Appliance
25”
Cutout depth
24”
Appliance
Frameless Cabinet
(European Style)
Case
25”
Cutout depth
Door Panel
24”
Appliance
24”
Cutout depth
1.800.735.4328 | THERMADOR.COM 233
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
CABINETRy STyLE & CUTOUT DEPTH
Freedom® Collection refrigeration appliances are designed to accommodate
nearly any type of kitchen cabinetry door installation. Generally, when using
standard ¾" (19 mm) panels, 25" (635 mm) deep cutouts are recommended but
the required cutout depth depends on the desired cabinetry and custom panel
execution, whether typical North American styles that employ a face frame—
requiring a depth of 25" (635 mm)—or European style—requiring a depth of
24" (610 mm).
The below cabinetry styles detail requirements for the cutout and custom panel.
A) STANDARD (PARTIAL) OvERLAy – 25" (635 MM) CUTOUT DEPTH
With standard overlay kitchen cabinetry the face frame is an important design
element. In order to emulate this aesthetic for the refrigerator, one must account
for the door panel thickness (typically 3/4" (19 mm)) as well as the face frame
thickness (here, also 3/4" (19 mm)). The resulting thickness of the custom door
panel is therefore 3/4" (19 mm) + 3/4" (19 mm) = 1 1/2" (38 mm). The cumulative
thickness of the custom door panel requires added depth in the cutout so 25"
(635 mm) is recommended (see sketch).
B) FULL OvERLAy – 25" (635 MM) CUTOUT DEPTH
The requirements for standard overlays are also valid for full overlay designs
so 25" (635 mm) cutout depth is recommended. However, especially if kitchen
cabinet doors are thinner than 3/4" (19 mm) or reveals are 1/8" (3 mm) or smaller,
a 24" (610 mm) cutout depth may also be acceptable. In this execution both
the cabinet door and the small reveal of the fully overlaid face frame must be
emulated within the typical appliance door panel thickness of 3/4" (19 mm). This
can be done either a) by simply ignoring the visible area of the face frame (very
small reveals show virtually no face frame) or b) by creating a “nose” on the
custom door panel to emulate a small visible face frame (see sketch).
C & D) OFFSET & FLUSH INSET – 25" (635 MM) CUTOUT DEPTH
Here, kitchen cabinetry door panels do not rest atop the cabinet face frame
(overlay), but are instead inserted partially (offset) or fully ush (inset) into the
face frame. Such offset or ush inset door panels require additional depth in the
cutout. Using the example of a 3/4" (19 mm) thick panel, the complete cutout
depth would be 24" (610 mm) + 3/4" (19 mm) = 24 3/4" (629 mm) and in this
example 25" (635 mm) is recommended.
SPLIT COLUMN INSTALLATION
A: Area for running the water line. It is recommended the water-box be
placed adjacent to the installation cutout, so that it can be accessed for
service without uninstalling the appliance. If this is not possible, place
the recessed water box adjacent to the power supply socket elevated at
the heights as referenced in areas A+B.
B: Area for installing the power connection
D: Opening depth of cutout, depending on kitchen design (24" minimum)
x y
18-Inch Columns 18" (457 mm) 9" (229 mm)
24-Inch Columns 24" (610 mm) 12" (305 mm)
30-Inch Columns 30" (762 mm) 15" (381 mm)
30-Inch Bottom Freezer 30" (762 mm) 15" (381 mm)
36-Inch Bottom Freezer 36" (914 mm) 18" (457 mm)
234
E) FRAMED – 24" (610 MM) CUTOUT DEPTH
For Freedom Collection refrigeration appliances, a metal frame (FRAMEKIT10)
may be afxed to the side of the cabinet which conveniently hides unnished
case returns and provides a classic built-in look. This is particularly relevant
for existing cabinetry that has not been custom-built to accommodate these
appliances. A 24" (610 mm) cutout will result in a slightly protruding door
panel for a typical built-in look.
F) EUROPEAN STyLE kITCHEN CABINETRy – 24" (610 MM) CUTOUT DEPTH
If the kitchen design is based on European style cabinetry, there is no need to
emulate the look of a face frame, as such a frame is not an element of the kitchen
cabinetry design. Therefore a 24" (610 mm) deep cutout with accompanying
custom panel will always be sufcient.
A) STANDARD
OvERLAy DESIGN
Custom Door Panel
(Emulating a Face Frame)
B) FULL OvERLAy
DESIGN
Custom Door Panel
with Nose (Emulating
a Face Frame)
IMPORTANT
It is strongly recommended the top interior of the
cutout be of solid material (5/8" (16 mm) thickness).
Ensure that the top well is completely ush for a depth
of at least 4" (102 mm).
Ensure that the side walls of the cutout are also
completely ush to a depth of at least 4" (102 mm).
If, for some reason, a separate cutout cabinet is
created, ensure that the furniture return is at least
4" (102 mm) deep for proper installation.
INSTALLATION DIMENSIONS
PLANNING ExAMPLE #1: FRAMELESS (EUROPEAN) CABINETRy
Upper Molding
Kitchen
Cabinet
FREEDOM REFRIGERATION
FREEDOM® COLLECTION
Kitchen Cabinetry
Door Panel
Min. 4"
(102 mm)
Installation Cutout
Upper
Molding
Custom
Door Panel
Kitchen
Cabinet
Room Wall
Toekick
Countertop
CUTOUT FOR 30" APPLIANCE, FRAMELESS CABINETRy:
In this example, the installation cutout is formed by simply leaving a
gap between two kitchen cabinets.
The custom door panel 3/4" (19 mm) will be identical in appearance
and thickness to the surrounding kitchen cabinetry panels.
- cutout width is exactly 30" (762 mm)
- cutout (case) depth is 24" (610 mm)—does not include door panel
- top and side walls of cutout interior are completely ush, of solid
material and at least 4" (102 mm) deep
Side Walls of Installation Cutout are Flush to Appliance
Room Floor
INSTALLATION CUTOUT
(vERTICAL SECTION)
1.800.735.4328 | THERMADOR.COM 235
30-INCH INSTALLATION CUTOUT (HORIZONTAL SECTION)
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
SIDE-By-SIDE INSTALLATION
The cutout width for side-by-side installations is dened by adding together the dimensions of two single columns. Below are the dimensions
of a classic 48" side-by-side, with an 18" freezer on the left and a 30" refrigerator on the right.
IMPORTANT: Just as with standalone columns, always ensure that
the receptacles and the water line are
correctly positioned. For dimensional
requirements see page 234.
48" SxS
(18" freezer + 30" refrigerator)
A: Area for running the water line. It is recommended the
water-box be placed adjacent to the installation cutout,
so that it can be accessed for service without uninstalling
the appliance. If this is not possible, place the recessed
water box adjacent to the power supply socket elevated
at the heights as referenced in areas A+B.
B: Area for installing the power connection
D: Opening depth of cutout, depending on kitchen design
(24" minimum)
236
PLANNING ExAMPLE #2: STANDARD OvERLAy CABINETRy
FREEDOM REFRIGERATION
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
Kitchen
Cabinet
Custom
Door Panel (3/4")
Kitchen Cabinetry
Face Frame (Visible)
Furniture Return
Cutout Cabinet
Installation Cutout,
(Created by a Separate Cutout)
CUTOUT FOR 42" SIDE-By-SIDE APPLIANCE COMBINATION, STANDARD
OvERLAy CABINETRy:
In this example, the installation cutout is formed by creating a separate cutout
Min. 4"
(102 mm)
around the appliances. It yields a look that deviates from the general kitchen design.
The custom door panel has a cumulative thickness of 1 1/2" (38 mm), 3/4"
(19 mm) emulating the face frame and 3/4" (19 mm) for the actual door panel). Thus,
a 25" (635 mm) deep installation cutout is required.
Countertop
– cutout width is exactly 42" (for an 18" + 24" = 42" side-by-side combination)
– cutout (case) depth is 25" (635 mm) due to 1 1/2" (38 mm) custom door panel
– any furniture return must be at least 4" (102 mm) deep, on interior top and sides,
of solid material and should be nished to match the exterior at the same depth
(4" or 102 mm)
Min. 4"
(102 mm)
1.800.735.4328 | THERMADOR.COM 237
FREEDOM® COLLECTION
INSTALLATION DIMENSIONS
TOEkICk & vENTING GRILLE
Each Freedom Collection refrigeration appliance comes with a 4" (102 mm) tall stainless steel toekick. A custom-made toekick that matches
the surrounding cabinetry may be applied instead. While standard toekick height is 4" (102 mm), depending on the usage of the leveling
legs, the toekick height could vary. Regardless of toekick height, it is imperative that the venting grille remain unblocked to ensure proper
functionality of the appliance. Decorative toekicks should be removable to allow for servicing.
Door Panel
Toekick
Typical 4" (102 mm) toekick height. Velcro adhesive
strips are used to fasten the toekick to the appliance.
Venting grille and (if applicable) the water lter cavity
are located above the toekick area.
UPPER MOLDING
The planning of decorative upper molding above the cutout
requires taking into account the actual or desired height of
the door panel.
The overall height of the door panel will depend on:
– the height of the appliance, typically 84" (2134 mm)—
leveling legs allow height adjustment ranging from -1/2"
(-13 mm) to +1 3/8" (+35 mm)
– the installed height of the door panel (distance from the
bottom edge of the door panel to the oor, typically 4"
(102 mm), and, if desired, any extension of the custom
panel above the appliance cutout)
– the appliance type (single door or bottom freezer)
IMPORTANT
Please recall that a panel should be installed at a minimum
height of 4" (102 mm) from the oor to allow proper
ventilation of the appliance.
Always ensure that the top of the cutout or upper decorative
molding is at least 4" (102 mm) deep, so that the refrigerator
can be properly secured to the cutout wall. This is particularly
important if a protruding cutout is specially created and
congured with a face frame. Furniture returns for any face
frame must be a minimum of 4" (102 mm) deep.
If required by the surrounding cabinetry design, the distance
between the bottom edge of the door panel and the oor
can be increased from approx. 4" (102 mm) up to 7
(181 mm), but should not be decreased. Note, however, that
the venting grille and (if applicable) water lter cavity will be
visible, even if the door is closed.
vERTICAL SECTION, SIDE vIEw:
Possible Extension
of the Door Panel
Standard
Door Panel
Appliance Door
Appliance
*Adjustment in leveling legs: -1/2" (-13 mm) to 1 3/8" (35 mm)
1
/8"
Decorative
Molding
238
FREEDOM® COLLECTION
PROFESSIONAL HANDLE TOP VIEW
PROFESSIONAL HANDLE FRONTAL VIEW
MASTERPIECE HANDLE TOP VIEW
PROFESSIONAL HANDLE TOP VIEW
PROFESSIONAL HANDLE FRONTAL VIEW
PROFESSIONAL HANDLE TOP VIEW
PROFESSIONAL HANDLE FRONTAL VIEW
INSTALLATION DIMENSIONS
DOOR SwIvEL RANGE
It is absolutely essential to ensure that the appliance is installed in such a way that the doors (including handles) and adjacent cabinets,
countertops, pilasters, walls or other kitchen elements do not interfere with one another when opened. The illustrations below depict the
swivel range of the Freedom Collection refrigerator doors including mounted door panels of both 3/4" (19 mm) and 1 1/2" (38 mm) thickness.
In the event of door interference the following solutions may be employed:
– Limit the refrigerator door opening angle to 90° with a door stop pin inserted into the hinge.
– Reduce the door panel thickness (if larger than 3/4" (19 mm)).
– Install a spacer between the appliance and the kitchen element that creates the interference.
– Rearrange the opposing kitchen element that creates the problem.
– Create a protruding cutout for the appliance.
FREEDOM REFRIGERATION
DOOR SwIvEL RANGE – 3/4" (19 MM)
FLUSH APPLIANCE DOOR PANEL
HANDLE INSTALLATION AND DIMENSIONS
PROFESSIONAL HANDLE
TOP-vIEw DOORS
DOOR SwIvEL RANGE – 1 1/2" (38 MM)
FLUSH APPLIANCE DOOR PANEL
MASTERPIECE HANDLE
TOP-vIEw DOORS
PR36HNDL10 PR30HNDL10* MS36HNDL10 MS30HNDL10*
3
/8"
1
(39 mm)
1.800.735.4328 | THERMADOR.COM 239
303/8"
(771,2 mm)
1
31
/16"
(829 mm)
SIDE-vIEw DRAwER SIDE-vIEw DRAwER
5
2
/8"
(66 mm)
3
/8"
1
(39 mm)
243/8"
(618,8 mm)
5
/8"
26
(677 mm)
25/8"
(66 mm)
1
1
/4"
(31 mm)
303/8"
(771,2 mm)
3
/16"
2
(55 mm)
1
33
/4"
(843 mm)
1
/4"
1
(31 mm)
*For use with 30" bottom freezer T30IB800SP drawer only
243/8"
(618,8 mm)
3
27
/16"
(690,8 mm)
3
2
/16"
(55 mm)
FREEDOM® COLLECTION
DOOR PANEL DIMENSIONS
Each Freedom Collection refrigeration appliance is designed to be equipped with a decorative door panel. A panel can be custom-made or
purchased as a stainless steel accessory. The table below illustrates the dimensions of the stainless steel panel accessories and can be used as
a guide in creating custom panels. At 79 7/8" (2029 mm) tall, they are designed for a toekick height of 4" (102 mm), and a total cutout height
of 84" (2134 mm) yielding 1/8" (3 mm) reveals. At 3/4" (19 mm) deep, they are designed to attach to the 24" (610 mm) deep appliance for an
overall depth of 24 3/4" (629 mm). See page 234 for cutout planning.
When using custom panels, always ensure that the panel reverse is nished to match the exterior, as parts of the panel reverse will be visible
when the refrigerator door is opened.
IMPORTANT: While these sketches can serve as a general guide in planning panel dimensions, the correct panel dimensions are dictated by
design choices including style and dimensions of surrounding kitchen cabinetry, case and toekick height, etc. Please ensure careful planning
based on the specic kitchen design.
SINGLE DOOR DISPENSER
BOTTOM
FREEZER
wINE
PRESERvATION
W W W W
V
U
P
M
H
H
N
R
H H
F
Drawer or Door
L
4" (102mm)
MODEL DESCRIPTION H w v R F M N P Q U L S
7
/8"
T18IF800SP
T24IR800SP
T24IF800SP
T30IR800SP
T30IF800SP
T18ID800RP
T18ID800LP
T24ID800RP
T24ID800LP
T30IB800SP
T36IB800SP
T36IT800NP
T18IW800SP
T24IW800SP
NOTE #1: The cutout for the dispenser unit must be horizontally and vertically centered in the panel.
NOTE #2: For custom wine preservation column door panels, the width of the two lateral anges of the frame may vary between 2
18-Inch
Freezer Column
24-Inch Freezer /
Fresh Food Columns
30-Inch Freezer /
Fresh Food Columns
18-Inch
Dispenser Columns
24-Inch
Dispenser Columns
30-Inch Two-Door
Bottom Freezer
36-Inch Two-Door
Bottom Freezer
36-Inch French Door
Bottom Freezer
18-Inch Wine
Preservation Column
24-Inch Wine
Preservation Column
79
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
79 7/8"
(2029 mm)
17 3/4"
(451 mm) — — — — — — — — — —
23 3/4"
(603 mm) — — — — — — — — — —
29 3/4"
(756 mm) — — — — — — — — — —
17 3/4"
(451 mm) — — —
23 3/4"
(603 mm) — — —
29 3/4"
(756 mm) —
35 3/4"
(908 mm) —
35 3/4"
(908 mm)
17 3/4"
(451 mm) — — — — — — —
23 3/4"
(603 mm) — — — — — — —
Q
17 3/4"
(451 mm)
Note #1 Note #2
51 11/32"
(1304 mm)
51 11/32"
(1304 mm)
51 11/32"
(1304 mm)
9 1/16"
(230.5 mm)
9 1/16"
(230.5 mm)
28 13/32"
(722 mm) — — — — — — —
28 13/32"
(722 mm) — — — — — — —
28 13/32"
(722 mm) — — — — — — —
14 1/2"
(368.3 mm)
14 1/2"
(368.3 mm)
32 11/16"
(830.5 mm)
32 11/16"
(830.5 mm)
4 11/32"
(110 mm) — — —
7 11/32"
(186 mm) — — —
1
/2" (64 mm) and 3 3/4" (95 mm).
10 1/8"
(257 mm)
10 1/8"
(257 mm)
10 1/8"
(257 mm)
10 1/8"
(257 mm)
(95 mm)
(95 mm)
S
3 3/4"
3 3/4"
MAx.
PANEL
wEIGHT
37 lbs.
(17kg)
50 lbs.
(23kg)
64 lbs.
(29kg)
37 lbs.
(17kg)
50 lbs.
(23kg)
55 lbs.
(25kg)
55 lbs.
(25kg)
55 lbs.
(25kg)
37 lbs.
(17kg)
50 lbs.
(23kg)
240
FLaT STaINLESS STEEL DOOR PaNELS
FREEDOM REFRIgERaTION
FREEDOM® COLLECTION
aCCESSORIES
FRESH FOOD
TFL24IR800 24-Inch
TFL30IR800 30-Inch
FREEZER
TFL18ID800 18-Inch with Dispenser
TFL18IR800 18-Inch without Dispenser
TFL24ID800 24-Inch with Dispenser
TFL24IR800 24-Inch without Dispenser
TFL30IR800 30-Inch without Dispenser
BOTTOM FREEZER
TFL30IB800 30-Inch 2-Door
TFL36IB800 36-Inch 2-Door
TFL36IT800 36-Inch French Door
WINE PRESERVaTION
TFL18IW800 18-Inch
TFL24IW800 24-Inch
CHISELED STaINLESS STEEL DOOR PaNELS
FRESH FOOD
TCH24IR800 24-Inch
TCH30IR800 30-Inch
FREEZER
TCH18ID800 18-Inch with Dispenser
TCH18IR800 18-Inch without Dispenser
TCH24ID800 24-Inch with Dispenser
TCH24IR800 24-Inch without Dispenser
TCH30IR800 30-Inch without Dispenser
BOTTOM FREEZER
TCH30IB800 30-Inch 2-Door
TCH36IB800 36-Inch 2-Door
TCH36IT800 36-Inch French Door
WINE PRESERVaTION
TCH18IW800 18-Inch
TCH24IW800 24-Inch
INSTaLLaTION aCCESSORIES
FRaMEKIT10 FREEDOM FRaME KIT
Included with all pre-assembled bottom freezers, this adjustable frame is also available as an optional
accessory for use with any custom column for installation in 24-inch (610 mm) deep cutouts. The kit
includes two identical and reversible metal side trims whose placement between the interior cutout
wall and the appliance helps overcome the challenge of un nished cabinet returns.
WATERCUBES CRUSHEDAGITATIONLOCK LIGHT
HEaTRKIT10 FREEDOM HEaTER KIT
When two appliances are installed side-by-side a sealing kit must be used. For combinations that
involve a freezer column, this kit is provided. For all other (non-traditional, i.e. two wine columns, two
bottom freezers, etc.) side-by-side combinations or instances where any appliances are installed less
than 6" (152 mm) apart from one another but not connected side-by-side, purchase this kit. This kit is
also recommended for use with any installation in areas that are subject to extreme humidity.
FILTER aCCESSORIES
REPLFLTR10 WaTER FILTER
Replacement water lter for use in all freezer and
bottom freezer models.
SCRNFLTR10 FILTER BY-PaSS
Filter by-pass for use with existing in-home water
ltration systems. For all freezer and bottom
freezer models.
HaNDLES
PR36HNDL10 36-INCH PROFESSIONaL
PR30HNDL10* 30-INCH PROFESSIONaL
Coordinates with Thermador Professional Series appliances.
MS36HNDL10 36-INCH MaSTERPIECE®
MS30HNDL10* 30-INCH MaSTERPIECE
Coordinates with Thermador Masterpiece Series appliances.
NOTE: Choose one handle for each column, choose 2 handles for each 2-door bottom freezer and choose
3 handles for each French Door bottom freezer.
*For use with T30IB800SP bottom freezer drawer only.
Heater Kit Required
1.800.735.4328 | THERMADOR.COM 241
FREEDOM® COLLECTION
24-INCH CUSTOM FRESH FOOD COLUMN
T24IR800SP
T24IR800SP
PERFORMaNCE
T24IR800SP
24-Inch Flush, Reversible Door Swing
Build Your Custom Column
See pages 226-227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 13.1
3
11
/4"
/16"
3
/4")
Product Width 23
Product Height 84"
Product Depth* 24"
Cutout Width 24"
Cutout Height 84"
Cutout Depth** 25" (24
Door Swing Clearance 26
Door Swing Reversible
Annual Energy Consumption 278.13 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 370
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
- Dedicated compressor and evaporator
- FreeFlow
items stored on the door are as cold as on the shelves
- Electronic controls for precise temperature management
- Full-width deli drawer
- FlexTemp
- Carbon air lter reduces odors and keeps air clean and fresh
- Full-length cantilever racks for ultimate adjustability
- Full-width glass shelves with metal trim
- Full-extension drawers at 90° door opening angle
- Gallon door bins
- SuperCool™– chills food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Accepts custom or stainless steel panels
- Reversible door swing
TEMPERaTURE RaNgES
Refrigeration 35°F (2°C) to 46°F (8°C)
Temperature Controlled Drawer Fish 32°F (0°C)
Deli Drawer Just above 32°F (0°C)
SuperCool
Energy Saving (Economy) Mode 45°F (7°C)
®
®
®
Cold Air System–air channel in the door ensures that
drawer optimized for sh, meat and produce
®
Hinge enables true ush design
Meat 35°F (1.5°C)
Produce 37°F (3°C)
™
35.5°F (2°C) for
approximately 9 hours
242
aCCESSORIES
TFL24IR800
24" Flat Stainless Steel Panel
TCH24IR800
24" Chiseled Stainless Steel Panel
PR36HNDL10
36" Professional Handle
MS36HNDL10
36" Masterpiece
®
Handle
See page 241 for Freedom Collection accessories.
FRAMEKIT10
Freedom Frame Kit
HEATRKIT10
Freedom Heater Kit
CUTOUT DIMENSIONS
Furniture return
TOP VIEW CLEaRaNCE
FREEDOM® COLLECTION
24-INCH CUSTOM FRESH FOOD COLUMN
A: Area for installation of power connection.
B: Niche depth depends on kitchen design. For a flush
installation, the depth needs to be at least 24 inches plus the
thickness of the door panel. Panel dimensions based on a
standard
dimensions may vary depending on kitchen reveals and toe kick.
Stainless Steel models contain a panel-ready base unit,
ready-to-install Stainless Steel door(s) with a right or
left door swing and handle(s).
1
/8" inch reveal and 4 inch toe kick. Custom panel
FREEDOM REFRIgERaTION — FRESH FOOD COLUMN
T24IR800SP
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM 243
FREEDOM® COLLECTION
30-INCH CUSTOM FRESH FOOD COLUMN
T30IR800SP
T30IR800SP
PERFORMaNCE
T30IR800SP
30-Inch Flush, Reversible Door Swing
Build Your Custom Column
See pages 226-227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 17.1
3
Product Width 29
Product Height 84"
Product Depth* 24"
Cutout Width 30"
Cutout Height 84"
Cutout Depth** 25 (24
Door Swing Clearance 33"
Door Swing Reversible
Annual Energy Consumption 319.01 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 421
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
/4"
3
/4")
- Dedicated compressor and evaporator
- FreeFlow
items stored on the door are as cold as on the shelves
- Electronic controls for precise temperature management
- Full-width deli drawer
- FlexTemp® drawer optimized for sh, meat and produce
- Carbon air lter reduces odors and keeps air clean and fresh
- Full-length cantilever racks for ultimate adjustability
- Full-width glass shelves with metal trim
- Full-extension drawers at 90° door opening angle
- Gallon door bins
- SuperCool™– chills food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Accepts custom or stainless steel panels
- Reversible door swing
TEMPERaTURE RaNgES
Refrigerator 35°F (2°C) to 46°F (8°C)
Temperature Controlled Drawer Fish 32°F (0°C)
Deli Drawer Just above 32°F (0°C)
SuperCool
Energy Saving (Economy) Mode 45°F (7°C)
®
®
Cold Air System–air channel in the door ensures that
Meat 35°F (1.5°C)
Produce 37°F (3°C)
™
35.5°F (2°C) for
approximately 9 hours
244
aCCESSORIES
TFL30IR800
30" Flat Stainless Steel Panel
TCH30IR800
30" Chiseled Stainless Steel Panel
PR36HNDL10
36" Professional Handle
MS36HNDL10
36" Masterpiece
®
Handle
See page 241 for Freedom Collection accessories.
FRAMEKIT10
Freedom Frame Kit
HEATRKIT10
Freedom Heater Kit
CUTOUT DIMENSIONS
TOP VIEW CLEaRaNCE
FREEDOM® COLLECTION
30-INCH CUSTOM FRESH FOOD COLUMN
A: Area for installation of power connection.
B: Niche depth depends on kitchen design. For a flush
installation, the depth needs to be at least 24 inches plus the
thickness of the door panel. Panel dimensions based on a
standard
dimensions may vary depending on kitchen reveals and toe kick.
Stainless Steel models contain a panel-ready base unit,
ready-to-install Stainless Steel door(s) with a right or
left door swing and handle(s).
1
/8" inch reveal and 4 inch toe kick. Custom panel
FREEDOM REFRIgERaTION — FRESH FOOD COLUMN
T30IR800SP
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM 245
FREEDOM® COLLECTION
18-INCH CUSTOM FREEZER COLUMN
T18ID800RP / T18ID800LP / T18IF800SP
T18ID800RP / T18ID800LP / T18IF800SP
PERFORMaNCE
- Dedicated compressor and evaporator
- Electronic controls for precise temperature management
- LED-illuminated dispenser*
- Oversized dispenser opening*
- Rapid Water Replenishment System*
- Chilled water, crushed and cubed ice*
- FreeFlow
- Full-length cantilever racks for ultimate adjustability
T18ID800RP
Right-Hand Door Swing
T18ID800LP
Left-Hand Door Swing
18-Inch Flush with External
Dispenser
Build Your Custom Column
T18IF800SP
Reversible Door Swing
18-Inch Flush with Internal
Ice Maker
Build Your Custom Column
See pages 226-227
for details.
See pages 226-227 for details.
SPECIFICaTIONS
T18ID800RP
T18ID800LP T18IF800SP
Total Capacity (cu. ft.)
Product Width
Product Height 84"
Product Depth* 24"
Cutout Width 18"
Cutout Height 84"
Cutout Depth** 25" (24
Door Swing Clearance 20
Door Swing Varies by Model
Annual Energy Consumption
Electrical Supply
Power Cord Included
Shipping Weight (lbs.)
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
8.4 8.5
3
17
/4"
3
/4")
11
/16"
450.05 kWh 370.11 kWh
120V/15 Amp Circuit
120V 3-Wire
300 / 313 300
- Full-width metal freezer shelves
- Full-extension drawers at 90° door opening angle
- Oversized freezer basket
- SuperFreeze™– freezes food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- All-stainless steel exterior dispenser*
- Full-height door –true cabinet integration without
exposed venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Accepts custom or stainless steel panels
*Dispenser models only
TEMPERaTURE RaNgES
Freezer -9°F (-23°C) to 7°F (-14°C)
SuperFreeze
Energy Saving (Economy) Mode 3°F (-16°C)
®
Ice System*
™
T18ID800RP
T18ID800LP T18IF800SP
-9°F (-23°C) for
approximately 52 hours
246
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
®
aCCESSORIES
T18ID800RP / T18ID800LP T18IF800SP
TFL18ID800
18" Flat Stainless Steel
Panel with Dispenser
PR36HNDL10
36" Professional Handle
FRAMEKIT10
Freedom Frame Kit
REPLFLTR10
Freedom Water Filter
TCH18ID800
18" Chiseled Stainless Steel
Panel with Dispenser
MS36HNDL10
36" Masterpiece
®
Handle
HEATRKIT10
Freedom Heater Kit
SCRNFLTR10
Filter By-Pass
TFL18IR800
18" Flat Stainless Steel Panel
PR36HNDL10
36" Professional Handle
FRAMEKIT10
Freedom Frame Kit
REPLFLTR10
Freedom Water Filter
See page 241 for Freedom Collection accessories.
TCH18IR800
18" Chiseled Stainless Steel Panel
MS36HNDL10
36" Masterpiece Handle
HEATRKIT10
Freedom Heater Kit
SCRNFLTR10
Filter By-Pass
FREEDOM® COLLECTION
18-INCH CUSTOM FREEZER COLUMN
T18ID800RP / T18ID800LP / T18IF800SP
T18ID800RP / T18ID800LP T18IF800SP
CUTOUT DIMENSIONS CUTOUT DIMENSIONS
FREEDOM REFRIgERaTION — FREEZER COLUMN
TOP VIEW CLEaRaNCE
PaNEL DIMENSIONS
3
17
/4"
(451 mm)
84"
(2134 mm)
1
7
/8" (181 mm)
213/16"-43/16"
(72-106 mm)
24"* (610 mm)
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
24"*
(610 mm)
(2029 mm)
(451 mm)
4" (102 mm)
7
79
/8"
3
17
/4"
4" (102 mm)
11
/16"
32
(830.5 mm)
1
14
/2"
(368 mm)
11
32
/16"
(830.5 mm)
3
17
/4" (451 mm)
1
9
/16" (231 mm)
(2029 mm)
11
4
/32"
(110 mm)
7
/8"
79
variable waterconnection
at the appliance
TOP VIEW CLEaRaNCE
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
1.800.735.4328 | THERMADOR.COM
All refrigerators are UL and CUL approved.
247
FREEDOM® COLLECTION
24-INCH CUSTOM FREEZER COLUMN
T24ID800RP / T24ID800LP / T24IF800SP
T24ID800RP / T24ID800LP / T24IF800SP
PERFORMaNCE
- Dedicated compressor and evaporator
- Electronic controls for precise temperature management
- LED-illuminated dispenser*
- Oversized dispenser opening*
- Rapid Water Replenishment System*
- Chilled water, crushed and cubed ice*
- FreeFlow
- Full-length cantilever racks for ultimate adjustability
T24ID800RP
Right-Hand Door Swing
T24ID800LP
Left-Hand Door Swing
18-Inch Flush with
External Dispenser
Build Your Custom Column
T24IF800SP
Reversible Door Swing
18-Inch Flush with
Internal Ice Maker
Build Your Custom Column
See pages 226-227
for details.
See pages 226-227 for details.
SPECIFICaTIONS
T24ID800RP
T24ID800LP T24IF800SP
Total Capacity (cu. ft.) 12
Product Width 23
Product Height 84"
Product Depth* 24"
Cutout Width 24"
Cutout Height 84"
Cutout Depth** 25" (24
Door Swing Clearance 26
Door Swing Varies by Model
Annual Energy Consumption
Electrical Supply
520.13 kWh 465.01 kWh
120V/15 Amp Circuit
Power Cord Included
Shipping Weight (lbs.)
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
375 / 370 367
3
/4"
3
/4")
11
/16"
120V 3-Wire
- Full-width metal freezer shelves
- Full-extension drawers at 90° door opening angle
- Oversized freezer basket
- SuperFreeze™– freezes food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- All-stainless steel exterior dispenser*
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Accepts custom or stainless steel panels
*Dispenser models only
TEMPERaTURE RaNgES
Freezer -9°F (-23°C) to 7°F (-14°C)
SuperFreeze
Energy Saving (Economy) Mode 3°F (-16°C)
®
Ice System*
™
T24ID800RP
T24ID800LP T24IF800SP
-9°F (-23°C) for
approximately 52 hours
248
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
®
aCCESSORIES
T24ID800RP / T24ID800LP T24IF800SP
TFL24ID800
24" Flat Stainless Steel
Panel with Dispenser
PR36HNDL10
36" Professional Handle
FRAMEKIT10
Freedom Frame Kit
REPLFLTR10
Freedom Water Filter
TCH24ID800
24" Chiseled Stainless Steel
Panel with Dispenser
MS36HNDL10
36" Masterpiece
®
Handle
HEATRKIT10
Freedom Heater Kit
SCRNFLTR10
Filter By-Pass
TFL24IR800
24" Flat Stainless Steel Panel
PR36HNDL10
36" Professional Handle
FRAMEKIT10
Freedom Frame Kit
REPLFLTR10
Freedom Water Filter
See page 241 for Freedom Collection accessories.
TCH24IR800
24" Chiseled Stainless Steel Panel
MS36HNDL10
36" Masterpiece Handle
HEATRKIT10
Freedom Heater Kit
SCRNFLTR10
Filter By-Pass
FREEDOM® COLLECTION
24-INCH CUSTOM FREEZER COLUMN
T24ID800RP / T24ID800LP / T24IF800SP
T24ID800RP / T24ID800LP T24IF800SP
CUTOUT DIMENSIONS CUTOUT DIMENSIONS
TOP VIEW CLEaRaNCE TOP VIEW CLEaRaNCE
FREEDOM REFRIgERaTION — FREEZER COLUMN
PaNEL DIMENSIONS
233/4"
(603 mm)
84"
(2134 mm)
1
7
/8" (181 mm)
213/16"-43/16"
(72-106 mm)
*
24" (610 mm)
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
24"
(610 mm)
(2029 mm)
(603 mm)
4" (102 mm)
*
(830.5 mm)
7
79
/8"
(830.5 mm)
3
/4"
23
4" (102 mm)
11
/16"
32
1
/2"
14
(368 mm)
11
32
/16"
3
23
/4" (603 mm)
1
9
/16" (231 mm)
(2029 mm)
11
7
/32"
(186 mm)
7
79
/8"
variable waterconnection
at the appliance
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
1.800.735.4328 | THERMADOR.COM
All refrigerators are UL and CUL approved.
249
FREEDOM® COLLECTION
30-INCH CUSTOM FREEZER COLUMN
T30IF800SP
T30IF800SP
PERFORMaNCE
- Dedicated compressor and evaporator
- Electronic controls for precise temperature management
- Full-length cantilever racks for ultimate adjustability
- Full-width metal freezer shelves
- Full-extension drawers at 90° door opening angle
- Oversized freezer basket
- Discrete and ltered ice maker
- Ultra-capacity ice drawer with exible ice bin
- SuperFreeze
- Sabbath mode
- Economy mode
- Vacation mode
T30IF800SP
30-Inch Flush, Reversible Door Swing
with Internal Ice Maker
Build Your Custom Column
See pages 226-227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 15.7
3
Product Width 29
Product Height 84"
Product Depth* 24"
Cutout Width 30"
Cutout Height 84"
Cutout Depth** 25 (24
Door Swing Clearance 33"
Door Swing Reversible
Annual Energy Consumption 516.84 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 409
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
/4"
3
/4")
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Accepts custom or stainless steel panels
- Reversible door swing
TEMPERaTURE RaNgES
Freezer -9°F (-23°C) to 7°F (-14°C)
SuperFreeze
Energy Saving (Economy) Mode 3°F (-16°C)
™
– freezes food quickly
®
Hinge enables true ush design
™
-9°F (-23°C) for
approximately 52 hours
250
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
aCCESSORIES
TFL30IR800
30" Flat Stainless Steel Panel
TCH30IR800
30" Chiseled Stainless Steel Panel
®
PR36HNDL10
36" Professional Handle
MS36HNDL10
36" Masterpiece
®
Handle
See page 241 for Freedom Collection accessories.
FRAMEKIT10
Freedom Frame Kit
HEATRKIT10
Freedom Heater Kit
REPLFLTR10
Freedom Water Filter
SCRNFLTR10
Filter By-Pass
CUTOUT DIMENSIONS
TOP VIEW CLEaRaNCE
FREEDOM REFRIgERaTION — FREEZER COLUMN
FREEDOM® COLLECTION
30-INCH CUSTOM FREEZER COLUMN
T30IF800SP
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM 251
FREEDOM® COLLECTION
30-INCH CUSTOM 2-DOOR BOTTOM FREEZER
T30IB800SP
T30IB800SP
PERFORMaNCE
- Dual compressor and dual evaporator
- Electronic controls for precise temperature management
- Full-width deli drawer
- Carbon air lter reduces odors and keeps air clean and fresh
- Full-length cantilever racks for ultimate adjustability
- Full-width glass shelves with metal trim
- Full-extension drawers at 90° door opening angle
- Gallon door bins
- Large capacity freezer drawer
T30IB800SP
30-Inch Flush, 2-Door, Reversible Door Swing
Build Your Custom Column
See pages 226-227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 16
Refrigerator Capacity (cu. ft.) 11
Freezer Capacity (cu. ft.) 5
3
Product Width 29
Product Height 84"
Product Depth* 24"
Cutout Width 30"
Cutout Height 84"
Cutout Depth** 25" (24
Door Swing Clearance 33"
Door Swing Reversible
Annual Energy Consumption 388 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 503
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
/4"
3
/4")
- Filtered ice maker
- SuperCool
- SuperFreeze™– freezes food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Accepts custom or stainless steel panels
- Reversible door swing
TEMPERaTURE RaNgES
Refrigerator 35°F (2°C) to 46°F (8°C)
Freezer -9°F (-23°C) to 7°F (-14°C)
Temperature Controlled Drawer Fish 32°F (0°C)
Deli Drawer Just above 32°F (0°C)
SuperCool
SuperFreeze
Energy Saving (Economy) Mode Refrigerator: 45°F (7°C)
®
™
– chills food quickly
™
™
Meat 35°F (1.5°C)
Produce 37°F (3°C)
35.5°F (2°C) for
approximately 9 hours
-9°F (-23°C) for
approximately 52 hours
Freezer: 3°F (-16°C)
252
aCCESSORIES
TFL30IB800
30" Flat Stainless Steel Panel Kit
TCH30IB800
30" Chiseled Stainless Steel Panel Kit
REPLFLTR10
Freedom Water Filter
PR36HNDL10
36" Professional Handle
PR30HNDL10
30" Professional Handle
SCRNFLTR10
Filter By-Pass
MS36HNDL10
36" Masterpiece
MS30HNDL10
30" Masterpiece Handle
See page 241 for Freedom Collection accessories.
®
Handle
FRAMEKIT10
Freedom Frame Kit
HEATRKIT10
Freedom Heater Kit
NOTE: This appliance requires one 36-inch handle for the door and one 30-inch handle for the bottom freezer drawer.
CUTOUT DIMENSIONS
TOP VIEW CLEaRaNCE
FREEDOM® COLLECTION
30-INCH CUSTOM 2-DOOR BOTTOM FREEZER
A: Area for installation of power connection.
B: Niche depth depends on kitchen design. For a flush
installation, the depth needs to be at least 24 inches plus the
thickness of the door panel. Panel dimensions based on a
standard
dimensions may vary depending on kitchen reveals and toe kick.
Stainless Steel models contain a panel-ready base unit,
ready-to-install Stainless Steel door(s) with a right or
left door swing and handle(s).
1
/8" inch reveal and 4 inch toe kick. Custom panel
FREEDOM REFRIgERaTION — BOTTOM FREEZER
T30IB800SP
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM
253
FREEDOM® COLLECTION
30-INCH PRE-aSSEMBLED 2-DOOR BOTTOM FREEZER
T30BB810SS / T30BB820SS
T30BB810SS / T30BB820SS
PERFORMaNCE
- Dual compressor and dual evaporator
- Electronic controls for precise temperature management
- Full-width deli drawer
- Carbon air lter reduces odors and keeps air clean and fresh
- Full-length cantilever racks for ultimate adjustability
- Full-width glass shelves with metal trim
- Full-extension drawers at 90° door opening angle
- Gallon door bins
- Large capacity freezer drawer
T30BB810SS
30-Inch, 2-Door
Reversible
Door Swing
Pre-Assembled
with Flat Stainless
Steel Panels and
Masterpiece
Handles
See pages 226227 for details.
T30BB820SS
30-Inch, 2-Door
Reversible
Door Swing
Pre-Assembled
with Flat Stainless
Steel Panels and
Professional
Handles
See pages 226227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 16
Refrigerator Capacity (cu. ft.) 11
Freezer Capacity (cu. ft.) 5
3
Product Width 29
Product Height 84"
Product Depth 24
Cutout Width 30"
Cutout Height 84"
Cutout Depth* 24" or 25"
Door Swing Clearance 33"
Door Swing Reversible
Annual Energy Consumption 388 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 492
* Cutout depth for installation with frame is 24". Remove frame for ush
installation at 25" depth.
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
/4"
3
/4"
- Filtered ice maker
- SuperCool
- SuperFreeze™– freezes food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Flat stainless steel door panel kit, pre-assembled
- Handle kit, pre-assembled
- Frame included for 24" deep cutouts, pre-assembled
- Reversible door swing
TEMPERaTURE RaNgES
Refrigerator 35°F (2°C) to 46°F (8°C)
Freezer -9°F (-23°C) to 7°F (-14°C)
Temperature Controlled Drawer Fish 32°F (0°C)
Deli Drawer Just above 32°F (0°C)
SuperCool
SuperFreeze
Energy Saving (Economy) Mode Refrigerator: 45°F (7°C)
®
™
– chills food quickly
™
™
Meat 35°F (1.5°C)
Produce 37°F (3°C)
35.5°F (2°C) for
approximately 9 hours
-9°F (-23°C) for
approximately 52 hours
Freezer: 3°F (-16°C)
254
aCCESSORIES
HEATRKIT10
Freedom Heater Kit
REPLFLTR10
Freedom Water Filter
See page 241 for Freedom Collection accessories.
SCRNFLTR10
Filter By-Pass
30-INCH PRE-aSSEMBLED 2-DOOR BOTTOM FREEZER
CUTOUT DIMENSIONS
TOP VIEW CLEaRaNCE
FREEDOM REFRIgERaTION — BOTTOM FREEZER
FREEDOM® COLLECTION
T30BB810SS / T30BB820SS
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
/4" thickness is mounted, total depth is 24 3/4".
with
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM
255
FREEDOM® COLLECTION
36-INCH CUSTOM 2-DOOR BOTTOM FREEZER
T36IB800SP
T36IB800SP
PERFORMaNCE
- Dual compressor and dual evaporator
- Electronic controls for precise temperature management
- Full-width deli drawer
- Carbon air lter reduces odors and keeps air clean and fresh
- Full-length cantilever racks for ultimate adjustability
- Full-width glass shelves with metal trim
- Full-extension drawers at 90° door opening angle
- Gallon door bins
- Large capacity freezer drawer
T36IB800SP
36-Inch Flush, 2-Door, Reversible Door Swing
Build Your Custom Column
See pages 226-227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 19.7
Refrigerator Capacity (cu. ft.) 14
Freezer Capacity (cu. ft.) 6
3
Product Width 35
Product Height 84"
Product Depth* 24"
Cutout Width 36"
Cutout Height 84"
Cutout Depth** 25" (24
Door Swing Clearance 33"
Door Swing Reversible
Annual Energy Consumption 451.87 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 529
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
/4"
3
/4")
- Filtered ice maker
- SuperCool
- SuperFreeze™– freezes food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Accepts custom or stainless steel panels
- Reversible door swing
TEMPERaTURE RaNgES
Refrigerator 35°F (2°C) to 46°F (8°C)
Freezer -9°F (-23°C) to 7°F (-14°C)
Temperature Controlled Drawer Fish 32°F (0°C)
Deli Drawer Just above 32°F (0°C)
SuperCool
SuperFreeze
Energy Saving (Economy) Mode Refrigerator: 45°F (7°C)
®
™
– chills food quickly
™
™
Meat 35°F (1.5°C)
Produce 37°F (3°C)
35.5°F (2°C) for
approximately 9 hours
-9°F (-23°C) for
approximately 52 hours
Freezer: 3°F (-16°C)
256
aCCESSORIES
TFL36IB800
36" Flat Stainless Steel Panel Kit
TCH36IB800
36" Chiseled Stainless Steel Panel Kit
PR36HNDL10
36" Professional Handle
MS36HNDL10
36" Masterpiece
®
Handle
See page 241 for Freedom Collection accessories.
FRAMEKIT10
Freedom Frame Kit
HEATRKIT10
Freedom Heater Kit
REPLFLTR10
Freedom Water Filter
SCRNFLTR10
Filter By-Pass
CUTOUT DIMENSIONS
TOP VIEW CLEaRaNCE
FREEDOM REFRIgERaTION — BOTTOM FREEZER
FREEDOM® COLLECTION
36-INCH CUSTOM 2-DOOR BOTTOM FREEZER
T36IB800SP
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
with 3/4" thickness is mounted, total depth is 24 3/4".
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM
257
FREEDOM® COLLECTION
36-INCH PRE-aSSEMBLED 2-DOOR BOTTOM FREEZER
T36BB810SS / T36BB820SS
T36BB810SS / T36BB820SS
PERFORMaNCE
- Dual compressor and dual evaporator
- Electronic controls for precise temperature management
- Full-width deli drawer
- Carbon air lter reduces odors and keeps air clean and fresh
- Full-length cantilever racks for ultimate adjustability
- Full-width glass shelves with metal trim
- Full-extension drawers at 90° door opening angle
- Gallon door bins
- Large capacity freezer drawer
T36BB810SS
36-Inch, 2-Door
Reversible
Door Swing
Pre-Assembled
with Flat Stainless
Steel Panels and
Masterpiece
Handles
See pages 226227 for details.
T36BB820SS
36-Inch, 2-Door
Reversible
Door Swing
Pre-Assembled
with Flat Stainless
Steel Panels and
Professional
Handles
See pages 226227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 19.7
Refrigerator Capacity (cu. ft.) 14
Freezer Capacity (cu. ft.) 6
3
Product Width 35
Product Height 84"
Product Depth 24
Cutout Width 36"
Cutout Height 84"
Cutout Depth* 24" or 25"
Door Swing Clearance 33"
Door Swing Reversible
Annual Energy Consumption 451.87 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 529
* Cutout depth for installation with frame is 24". Remove frame for ush
installation at 25" depth.
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
/4"
3
/4"
- Filtered ice maker
- SuperCool
- SuperFreeze™– freezes food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Flat stainless steel door panel kit, pre-assembled
- Handle kit, pre-assembled
- Frame included for 24" deep cutouts, pre-assembled
- Reversible door swing
TEMPERaTURE RaNgES
Refrigerator 35°F (2°C) to 46°F (8°C)
Freezer -9°F (-23°C) to 7°F (-14°C)
Temperature Controlled Drawer Fish 32°F (0°C)
Deli Drawer Just above 32°F (0°C)
SuperCool
SuperFreeze
Energy Saving (Economy) Mode Refrigerator: 45°F (7°C)
®
™
– chills food quickly
™
™
Meat 35°F (1.5°C)
Produce 37°F (3°C)
35.5°F (2°C) for
approximately 9 hours
-9°F (-23°C) for
approximately 52 hours
Freezer: 3°F (-16°C)
258
aCCESSORIES
HEATRKIT10
Freedom Heater Kit
REPLFLTR10
Freedom Water Filter
See page 241 for Freedom Collection accessories.
SCRNFLTR10
Filter By-Pass
36-INCH PRE-aSSEMBLED 2-DOOR BOTTOM FREEZER
CUTOUT DIMENSIONS
TOP VIEW CLEaRaNCE
FREEDOM REFRIgERaTION — BOTTOM FREEZER
FREEDOM® COLLECTION
T36BB810SS / T36BB820SS
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
/4" thickness is mounted, total depth is 24 3/4".
with
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM
259
FREEDOM® COLLECTION
36-INCH CUSTOM FRENCH DOOR BOTTOM FREEZER
T36IT800NP
T36IT800NP
PERFORMaNCE
- Dual compressor and dual evaporator
- Electronic controls for precise temperature management
- Full-width deli drawer
- Carbon air lter reduces odors and keeps air clean and fresh
- Full-length cantilever racks for ultimate adjustability
- Full-width glass shelves with metal trim
- Full-extension drawers at 90° door opening angle
- Gallon door bins
- Large capacity freezer drawer
T36IT800NP
36-Inch Flush, French Door
Build Your Custom Column
See pages 226-227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 19.5
Refrigerator Capacity (cu. ft.) 14
Freezer Capacity (cu. ft.) 6
3
15
/4"
/16"
3
/4")
Product Width 35
Product Height 84"
Product Depth* 24"
Cutout Width 36"
Cutout Height 84"
Cutout Depth** 25" (24
Door Swing Clearance 20
Annual Energy Consumption 447.86 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 545
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
- Filtered ice maker
- SuperCool
- SuperFreeze™– freezes food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Accepts custom or stainless steel panels
TEMPERaTURE RaNgES
Refrigerator 35°F (2°C) to 46°F (8°C)
Freezer -9°F (-23°C) to 7°F (-14°C)
Temperature Controlled Drawer Fish 32°F (0°C)
Deli Drawer Just above 32°F (0°C)
SuperCool
SuperFreeze
Energy Saving (Economy) Mode Refrigerator: 45°F (7°C)
®
™
– chills food quickly
™
™
Meat 35°F (1.5°C)
Produce 37°F (3°C)
35.5°F (2°C) for
approximately 9 hours
-9°F (-23°C) for
approximately 52 hours
Freezer: 3°F (-16°C)
260
aCCESSORIES
TFL36IT800
36" Flat Stainless Steel Panel Kit
TCH36IT800
36" Chiseled Stainless Steel Panel Kit
PR36HNDL10
36" Professional Handle
MS36HNDL10
36" Masterpiece
®
Handle
See page 241 for Freedom Collection accessories.
FRAMEKIT10
Freedom Frame Kit
HEATRKIT10
Freedom Heater Kit
REPLFLTR10
Freedom Water Filter
SCRNFLTR10
Filter By-Pass
36-INCH CUSTOM FRENCH DOOR BOTTOM FREEZER
CUTOUT DIMENSIONS
TOP VIEW CLEaRaNCE
FREEDOM REFRIgERaTION — BOTTOM FREEZER
FREEDOM® COLLECTION
T36IT800NP
PaNEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM
261
FREEDOM® COLLECTION
36-INCH PRE-aSSEMBLED FRENCH DOOR BOTTOM FREEZER
T36BT810NS / T36BT820NS
T36BT810NS / T36BT820NS
PERFORMaNCE
- Dual compressor and dual evaporator
- Electronic controls for precise temperature management
- Full-width deli drawer
- Carbon air lter reduces odors and keeps air clean and fresh
- Full-length cantilever racks for ultimate adjustability
- Full-width glass shelves with metal trim
- Full-extension drawers at 90° door opening angle
- Gallon door bins
- Large capacity freezer drawer
T36BT810NS
36-Inch,
French Door
Pre-Assembled
with Flat
Stainless Steel
Panels and
Masterpiece
Handles
See pages 226227 for details.
T36BT820NS
36-Inch,
French Door
Pre-Assembled
with Flat
Stainless Steel
Panels and
Professional
Handles
See pages 226227 for details.
SPECIFICaTIONS
Total Capacity (cu. ft.) 19.5
Refrigerator Capacity (cu. ft.) 14
Freezer Capacity (cu. ft.) 6
3
3
15
/4"
/4"
/16"
Product Width 35
Product Height 84"
Product Depth 24
Cutout Width 36"
Cutout Height 84"
Cutout Depth* 24" or 25"
Door Swing Clearance 20
Annual Energy Consumption 447.86 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 666
* Cutout depth for installation with frame is 24". Remove frame for ush
installation at 25" depth.
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
- Filtered ice maker
- SuperCool
- SuperFreeze™– freezes food quickly
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
- ENERGY STAR® qualied
DESIgN
- FREEDOM® Hinge enables true ush design
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED sidewall and theater lighting
- Brightspace interior design
- Flat stainless steel door panel kit, pre-assembled
- Handle kit, pre-assembled
- Frame included for 24" deep cutouts, pre-assembled
TEMPERaTURE RaNgES
Refrigerator 35°F (2°C) to 46°F (8°C)
Freezer -9°F (-23°C) to 7°F (-14°C)
Temperature Controlled Drawer Fish 32°F (0°C)
Deli Drawer Just above 32°F (0°C)
SuperCool
SuperFreeze
Energy Saving (Economy) Mode Refrigerator: 45°F (7°C)
®
™
– chills food quickly
™
™
Meat 35°F (1.5°C)
Produce 37°F (3°C)
35.5°F (2°C) for
approximately 9 hours
-9°F (-23°C) for
approximately 52 hours
Freezer: 3°F (-16°C)
262
aCCESSORIES
HEATRKIT10
Freedom Heater Kit
REPLFLTR10
Freedom Water Filter
See page 241 for Freedom Collection accessories.
SCRNFLTR10
Filter By-Pass
36-INCH PRE-ASSEMBLED FRENCH DOOR BOTTOM FREEZER
CUTOUT DIMENSIONS
TOP VIEW CLEARANCE
FREEDOM REFRIgERATION — BOTTOM FREEZER
FREEDOM® COLLECTION
T36BT810NS / T36BT820NS
PANEL DIMENSIONS
*
*
*Excludes thickness of door panel. If standard panel
3
/4" thickness is mounted, total depth is 24 3/4".
with
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM 263
FREEDOM® COLLECTION
18-INCH CUSTOM WINE PRESERVATION COLUMN
T18IW800SP
T18IW800SP
PERFORMANCE
- Dual temperature and humidity wine preservation
- Isolated compressors for vibration reduction
- Dedicated compressor and evaporator
- Electronic controls for precise temperature management
- Tempered and UV-protective glass doors
- Full-extension dark exotic hardwood wine racks
- Carbon air lter reduces odors and keeps air clean and fresh
- Portable aluminum wine presenter
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
T18IW800SP
18-Inch Flush, Reversible Door Swing
Build Your Custom Column
See pages 226-227 for details.
DESIgN
®
- FREEDOM
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED interior lighting
- Accepts custom or stainless steel panels
- Reversible door swing
Hinge enables true ush design
SPECIFICATIONS
Bottle Capacity (750 ml) 70
3
11
/4"
/16"
3
/4")
Product Width 17
Product Height 84"
Product Depth* 24"
Cutout Width 18"
Cutout Height 84"
Cutout Depth** 25" (24
Door Swing Clearance 20
Door Swing Reversible
Annual Energy Consumption 365 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 314
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
TEMPERATURE RANgES
Upper Zone 41°F (5°C) to 64°F (18°C)
Lower Zone 41°F (5°C) to 64°F (18°C)
®
264
ACCESSORIES
TFL18IW800
18" Flat Stainless Steel Panel
TCH18IW800
18" Chiseled Stainless Steel Panel
PR36HNDL10
36" Professional Handle
MS36HNDL10
36" Masterpiece
®
Handle
See page 241 for Freedom Collection accessories.
FRAMEKIT10
Freedom Frame Kit
HEATRKIT10
Freedom Heater Kit
CUTOUT DIMENSIONS
17
3
/4"
TOP VIEW CLEARANCE
FREEDOM REFRIgERATION — WINE PRESERVATION
FREEDOM® COLLECTION
18-INCH CUSTOM WINE PRESERVATION COLUMN
T18IW800SP
PANEL DIMENSIONS
3
17
/4"
(451 mm)
84"
(2134 mm)
1
7
/8" (181 mm)
213/16"-43/16"
(72-106 mm)
†
(610 mm)
24"
†Excludes thickness of door panel. If standard panel
3
/4" thickness is mounted, total depth is 24 3/4".
with
All refrigerators are UL and CUL approved.
†
24"
(610 mm)
(2029 mm)
(451 mm)
4" (102 mm)
*33/4"
(95 mm)
1
/8"
10
(257 mm)
7
79
/8"
3
17
/4"
10
(257 mm)
4" (102 mm)
1
/8"
(451 mm)
3
*3
/4"
(95 mm)
* variable between
1/
2
" (64 mm)
2
and 3
7
/8"
79
(2029 mm)
3/
4
" (95 mm).
1.800.735.4328 | THERMADOR.COM
265
FREEDOM® COLLECTION
24-INCH CUSTOM WINE PRESERVATION COLUMN
T24IW800SP
T24IW800SP
PERFORMANCE
- Dual temperature and humidity wine preservation
- Isolated compressors for vibration reduction
- Dedicated compressor and evaporator
- Electronic controls for precise temperature management
- Tempered and UV-protective glass doors
- Full-extension dark exotic hardwood wine racks
- Carbon air lter reduces odors and keeps air clean and fresh
- Portable aluminum wine presenter
- Sabbath mode
- Economy mode
- Vacation mode
- Door open alarm
T24IW800SP
24-Inch Flush, Reversible Door Swing
Build Your Custom Column
See pages 226-227 for details.
SPECIFICATIONS
Bottle Capacity (750 ml) 98
3
11
/4"
/16"
3
/4")
Product Width 23
Product Height 84"
Product Depth* 24"
Cutout Width 24"
Cutout Height 84"
Cutout Depth** 25" (24
Door Swing Clearance 26
Door Swing Reversible
Annual Energy Consumption 379.97 kWh
Electrical Supply 120V/15 Amp Circuit
Power Cord Included 120V 3-Wire
Shipping Weight (lbs.) 376
*Depth without door panel
**Minimum cutout depth for ush installation with 3/4" thick panel
DESIgN
®
- FREEDOM
- Full-height door –true cabinet integration without exposed
venting grille
- All-LED interior lighting
- Accepts custom or stainless steel panels
- Reversible door swing
Hinge enables true ush design
TEMPERATURE RANgES
Upper Zone 41°F (5°C) to 64°F (18°C)
Lower Zone 41°F (5°C) to 64°F (18°C)
266
Contributes 1 point toward satisfying the
high-efciency appliances credit under LEED
ACCESSORIES
TFL24IW800
24" Flat Stainless Steel Panel
TCH24IW800
24" Chiseled Stainless Steel Panel
®
PR36HNDL10
36" Professional Handle
MS36HNDL10
36" Masterpiece
®
Handle
See page 241 for Freedom Collection accessories.
FRAMEKIT10
Freedom Frame Kit
HEATRKIT10
Freedom Heater Kit
CUTOUT DIMENSIONS
TOP VIEW CLEARANCE
FREEDOM REFRIGERATION — WINE PRESERVATION
FREEDOM® COLLECTION
24-INCH CUSTOM WINE PRESERVATION COLUMN
T24IW800SP
PANEL DIMENSIONS
†
†
†Excludes thickness of door panel. If standard panel
3
with
/4" thickness is mounted, total depth is 24 3/4".
All refrigerators are UL and CUL approved.
1.800.735.4328 | THERMADOR.COM 267
Loading...