Thermador SENSORPOT6 User Manual

120

120

Cooktop model CeS365FS Shown with 30" Single oven m301eS and warming drawer wd30eS

ELECTRIC COOKTOPS

MASTERPIECE® SERIES

Excellent performance, precise control and a sleek elegant profile
are just a few of the benefits of these reengineered electric
cooktops. The exclusive Sensor Dome™ system monitors the
temperature of foods to ensure perfect cooking results every
time. Our 13-inch element is the industry’s largest and most
powerful electric round element, and our CookSmart® system
offers nine pre-programmed settings to effortlessly cook a wide
range of foods. With a variety of new state-of-the-art features,
Masterpiece® Series Electric Cooktops allow you to elevate your
cooking to levels never imagined.

COOKTOPS — eLeCTrIC

1.800.735.4328 | THERMADOR.COM

121

eLeCTrIC COOKTOPS FeATureS & beNeFITS

SeNSOr DOme™

Because the sensor
constantly monitors the
temperature and can
automatically adjust the heat
level, you can be sure that
your meals are being cooked
perfectly. This is the answer
to deep frying food, cooking
rice and simmering delicate
sauces.

THERMADOR EXCLUSIVE

hOW IT WOrKS

This unique retractable sensor
utilizes an infrared beam that
continuously measures the
heat from the cookware. The
sensor cycles the element
on and off to maintain the
precise temperature needed.
The result is time savings
combined with superior
cooking performance —
without the guesswork or the
need to constantly adjust the
temperature.

THERMADOR EXCLUSIVE

brIDge eLemeNT

Only Thermador offers
a bridge element that
incorporates a dual-zone
element. Use the bridge
element to heat oblong
pans and the dual-zone
element to heat pans of
different diameters.

THERMADOR EXCLUSIVE

ThermADOr SeNSOr
DOme POTS

Special Thermador Sensor
Dome pots are available
to order as accessories.
These pots are optimized for
CookSmart Sensor Cooking
and work with electric, gas
and induction technology.
They are ergonomically
designed for easy handling,
ovenproof and heat-insulated
for improved energy savings.

LArgeST eLeCTrIC eLemeNT ON The mArKeT

This huge element is the widest and most powerful round electric
element on the market, with 4,000 watts of power for faster
heat-up and three zones to efficiently heat a variety of pot sizes,
such as a 16" skillet (e.g. accessory CHEFSPAN13–16" pan which
fits perfectly on the 13" element.) THERMADOR EXCLUSIVE

COOKSmArT®

Never guess at cooking time or temperature again. With
9 pre-programmed modes and auto-shutoff, you’ll get perfect
results every time you cook. Cooking modes: pasta, potatoes,
rice, dumplings, vegetables, sausages, milk, rice pudding,
deep frying. THERMADOR EXCLUSIVE

TOuCh CONTrOL

The handsome control panel gives you
immediate access to 17 power settings,
a keep warm, fast preheat and a panel
lock function.

122

ELECTRIC COOKTOPS PLANNING INFORMATION

COOKTOPS — ELECTRIC

MODEL OPTIONS

There are two sizes of Masterpiece® Electric Cooktops
to choose from—30-inch and 36-inch. Models are
available with mechanical controls and touch controls
in a variety of cooktop configurations to fit your
client's cooking style. In addition, you can choose
models with our exclusive Sensor Dome™ system which
monitors the temperature of foods to ensure perfect
cooking results every time. Be sure to reference the
correct model information in this design guide.

INSTALLATION CONSIDERATIONS

The information in this design guide provides key
features, product dimensions, cutouts and installation
specifications. Before installing a Thermador
Masterpiece Electric Cooktop, be sure to verify the
cutout dimensions and electrical connections. Also,
always consult with the installation manual packed with
the product for complete details before installing.

Thermador Masterpiece Electric Cooktops may be
installed above a Thermador Single Built-in Oven as
long as there is no contact between the bottom of the
cooktop and the top of the oven.

Thermador Masterpiece Electric Cooktops may also
be installed above a Thermador Warming Drawer
to create a convenient cooking center. Refer to the
warming drawer section for additional specifications.

ELECTRICAL SPECIFICATIONS

Be sure your appliance is properly installed and grounded by a qualified
technician. Installation, electrical connections and grounding must comply
with all applicable local codes.

All Thermador Electric Cooktops are dual rated, designed to be connected to
either 240/208V AC, 60 Hz, 3 wire, single-phase power supply.

Install a suitable conduit box (not furnished). An appropriately-sized,
UL-listed conduit connector must be used to correctly attach the conduit
to the junction box.

MODEL REQUIRED CIRCUIT BREAKER

240V, 3 Wire, 60 Hz 208V, 3 Wire, 60 Hz

CEM304FS 40 Amp 30 Amp

CES304FS 40 Amp 30 Amp

CET304FS 40 Amp 30 Amp

CEM365FS 40 Amp 40 Amp

CES365FS 50 Amp 40 Amp

CES366FS 50 Amp 40 Amp

CET366FS 50 Amp 40 Amp

Important: Local Codes may vary; installation, electrical connections and
grounding must comply with all applicable local codes. If required by the
National Electrical Code (or Canadian Electrical Code), this appliance must be
installed on a separate branch circuit.

Solid surface countertops require a special cutout size
and installation. For example, heat reflective tape
or rounded corners may be necessary. Contact the
countertop manufacturer for instructions specific to
your countertop.

We strongly recommend the installation of a
Thermador Ventilation System with all Masterpiece
Electric Cooktops. Refer to the ventilation section for
specifications.

WARRANTY

Limited warranty parts and labor (1 year)

Limited warranty for glass ceramic surface/electronic
elements and switches; Parts only (2nd to 5th year)

See page 294 for additional warranty details.

ELECTRICAL LOCATION

The junction box must be located within 3 feet (~900 mm) of the cooktop
connection. It should be easily accessible for service purposes.

15

3

/16"

(99mm) + Fitting/Conduit 1" (26mm)

12" (300mm) Approximate

CABINET REQUIREMENTS

The distance from the top of the cooktop to the bottom of the cabinets above
it must be A = 30" (762 mm) minimum. This distance can be reduced to A
= 24" (610 mm) when the bottom of the wood or metal cabinet is protected
by not less than 1/4" (6.35 mm) flame retardant millboard, covered by no. 28
steel sheet 0.015 (.4 mm) thick stainless steel, 0.024" (0.6 mm) aluminum, or

0.020" (0.5 mm) thick copper, at a minimum. Verify that the cabinets above
the cooktop are a maximum of B = 13" (330 mm) deep.

1.800.735.4328 | THERMADOR.COM

123