Theben thePiccola P360-100 DE User Manual
1
thePiccola P360-100 DE WH
2090200
307146 02
Presence detector
EN
1. Basic safety information 3
2. Proper use 3
Disposal 3
3. Device description 4
4. Installation and connection 4
Installing the presence
detector 4
Connecting the presence
detector 6
Individual switching 7
Parallel switching 7
2
Push button control 8
Installation instructions and
detection area 8
5. Walking test 9
6. Setting 9
Setting the brightness
switching value (LUX) 10
Setting the time delay (TIME) 12
7. Settings with remote
control 12
Settings by using theSenda S 13
Settings by using theSenda P 13
Settings with Sendo Pro
868-A 15
8. Technical data 15
9. Contact 16
3
1. Basic safety information
Danger of death through electric shock or fire!
Installation should only be carried out by a
qualied electrician!
WARNING
•
The device conforms with EN 60669-2-1 if correctly
installed
2. Proper use
•
Presence detector for automatic lighting control dependent on presence and brightness
•
Suitable for ceiling installation (false ceilings)
•
Suitable for small rooms, corridors, toilets, etc.
Disposal
Dispose of the device in an environmentally sound manner
(electronic waste)
4
3. Device description
Sensor unit
red LED
Power supply unit
2 potentiometers for setting
the time delay (TIME) and
the brightness switching
value (LUX)
4. Installation and connection
Installing the presence detector
L Installation height: 2–4 m
L Cable length: 45 cm
L Presence detector requires clear line of sight to people
5
Disconnect power source
Create a ceiling opening of Ø 34–36 mm
Connect power supply unit according to the
wiring diagram
Make settings at the potentiometers
Push the power supply unit through the ceiling opening
and attach the sensor with tensioned springs in the ceiling
Ø 34-36 mm
6–8 mm
max. 1 x 2,5 mm
2
Loading...