Texas Instruments LM324APWLE, LM324ANSR, LM2902DR, LM224DR, LM224ADR Datasheet

LM124, LM124A, LM224, LM224A

LM324, LM324A, LM324Y, LM2902, LM2902Q

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066E– SEPTEMBER 1975 – REVISED FEBRUARY1997

3–1

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Wide Range of Supply Voltages:

Single Supply...3 V to 30 V (LM2902 and LM2902Q 3 V to 26 V), or Dual Supplies

Low Supply Current Drain Independent of Supply Voltage . . . 0.8 mA Typ

Common-Mode Input Voltage Range Includes Ground Allowing Direct Sensing Near Ground

Low Input Bias and Offset Parameters:

Input Offset Voltage ...3 mV Typ A Versions ...2 mV Typ Input Offset Current...2 nA Typ Input Bias Current...20 nA Typ A Versions . . . 15 nA Typ

Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . 32 V (26 V for LM2902 and LM2902Q)

Open-Loop Differential Voltage Amplification . . . 100 V/mV Typ

Internal Frequency Compensation

description

These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies is also possible when the difference between the two supplies is 3 V to 30 V (for the LM2902 and LM2902Q, 3 V to 26 V) and V

is at least 1.5 V more positive than the input common-mode voltage. The low supply current drain is independent of the magnitude of the supply voltage.

Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and easily provides the required interface electronics without requiring additional ±15-V supplies.

The LM2902Q is manufactured to demanding automotive requirements. The LM124 and LM124A are characterized for operation over the full military temperature range of –55°C to

125°C. The LM224 and LM224A are characterized for operation from –25°C to 85°C. The LM324 and LM324A are characterized for operation from 0°C to 70°C. The LM2902 and LM2902Q are characterized for operation from –40°C to 125°C.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

–

IN –

IN +

OUT

1 2 3 4 5 6 7

14 13 12 11 10

9 8

1OUT

1IN–

1IN+

2IN+

2IN–

2OUT

4OUT 4IN– 4IN+ GND 3IN+ 3IN– 3OUT

LM124, LM124A ...J OR W PACKAGE

ALL OTHERS . . . D, DB, N OR PW PACKAGE

(TOP VIEW)

3212019

910111213

4 5 6 7 8

18 17 16 15 14

4IN+ NC GND NC 3IN+

1IN+

2IN+

LM124, LM124A . . . FK PACKAGE

(TOP VIEW)

1IN –

1OUT

3IN –

4IN –

2IN –

2OUT

NC – No internal connection

3OUT

4OUT

symbol (each amplifier)

LM124, LM124A, LM224, LM224A LM324, LM324A, LM324Y, LM2902, LM2902Q QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066E– SEPTEMBER 1975 – REVISED FEBRUARY1997

3–2

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

AVAILABLE OPTIONS

PACKAGED DEVICES

VIOmax AT 25°C

SMALL

OUTLINE

(D)

†

VERY

SMALL

OUTLINE

(DB)

‡

CHIP

CARRIER

(FK)

CERAMIC

DIP

(J)

PLASTIC

DIP

(N)

TSSOP

(PW)

‡

FLAT

PACK

(W)

CHIP

FORM

(Y)

0°C to

7 mV LM324D LM324DBLE — — LM324N LM324PWLE —

70°C

3 mV LM324AD — — — LM324AN LM324APWLE —

LM324Y

–25°C to

5 mV LM224D — — — LM224N — —

85°C

3 mV LM224AD — — — LM224AN — —

—

–40°C to

LM2902D

— — LM2902N

—

125°C

7 mV

LM2902QD

LM2902DBLE

— — LM2902QN

LM2902PWLE

—

–55°C to 5 mV

— — LM124FK LM124J — —

LM124W

125°C 2 mV

— — LM124AFK LM124AJ — —

—

†

The D package is available taped and reeled. Add the suffix R to the device type (e.g., LM324DR).

‡

The DB and PW packages are only available left-end taped and reeled.

schematic (each amplifier)

To Other Amplifiers

≈ 6-µA

Current

Regulator

OUT

GND

IN –

IN +

≈ 100-µA

Current

Regulator

≈ 50-µA

Current

Regulator

COMPONENT COUNT

(total device)

Epi-FET Transistors Diodes Resistors Capacitors

≈ 6-µA

Current

Regulator

LM124, LM124A, LM224, LM224A

LM324, LM324A, LM324Y, LM2902, LM2902Q

QUADRUPLE OPERATIONAL AMPLIFIERS

SLOS066E– SEPTEMBER 1975 – REVISED FEBRUARY1997

3–3

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

LM324Y chip information

This chip, when properly assembled, displays characteristics similar to the LM324. Thermal compression or ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive epoxy or a gold-silicon preform.

BONDING PAD ASSIGNMENTS

1IN+ 1IN–

2OUT

1OUT 2IN+

2IN–

CC+

3IN+ 3IN–

4OUT

3OUT 4IN+

4IN–

GND

CHIP THICKNESS: 15 TYPICAL BONDING PADS: 4 × 4 MINIMUM TJmax = 150°C TOLERANCES ARE ± 10%. ALL DIMENSIONS ARE IN MILS. PIN (11) IS INTERNALLY CONNECTED

TO BACKSIDE OF CHIP.

(3) (2)

(7) (10)

(9) (14)

(1) (5) (6)

(8)

(12) (13)

(1)

(2)

(3)

(4)

(5)

(6)

(7) (8)

(9)

(10)

(11)

(12)

(13)

(14)

(11)

(4)

+ 6 hidden pages