Texas Instruments 74AC11004N, 74AC11004DWR, 74AC11004DW, 74AC11004DBR, 74AC11004DBLE Datasheet

74AC11004

HEX INVERTER

SCAS033B – JANUARY 1988 – REVISED APRIL 1996

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Flow-Through Architecture Optimizes PCB Layout

Center-Pin VCC and GND Configuration Minimizes High-Speed Switching Noise

EPIC

 (Enhanced-Performance Implanted

CMOS) 1-µm Process

500-mA Typical Latch-Up Immunity at 125°C

Package Options Include Plastic Small-Outline (DW) and Shrink Small-Outline (DB) Packages, and Standard Plastic 300-mil DIPs (N)

description

This device contains six independent inverters. It performs the Boolean function Y = A. The 74AC11004 is characterized for operation from –40°C to 85°C.

FUNCTION TABLE

(each inverter)

INPUTAOUTPUT

H L L H

logic symbol

†

This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12.

PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

EPIC is a trademark of Texas Instruments Incorporated.

1 2 3 4 5 6 7 8 9 10

20 19 18 17 16 15 14 13 12 11

1Y 2Y

3Y GND GND GND GND

1A 2A 3A NC V

NC 4A 5A 6A

DB, DW, OR N PACKAGE

(TOP VIEW)

NC – No internal connection

74AC11004 HEX INVERTER

SCAS033B – JANUARY 1988 – REVISED APRIL 1996

POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

logic diagram (positive logic)

absolute maximum ratings over operating free-air temperature range (unless otherwise noted)

†

Supply voltage range, V

–0.5 V to 7 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input voltage range, V

(see Note 1) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output voltage range, VO (see Note 1) –0.5 V to VCC + 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Input clamp current, IIK (VI < 0 or VI > VCC) ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Output clamp current, IOK (VO < 0 or VO > VCC) ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous output current, IO (VO = 0 to VCC) ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Continuous current through V

or GND ±100 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Maximum power dissipation at TA = 55°C (in still air) (see Note 2):DW package 1.6 W. . . . . . . . . . . . . . . . . .

DB package 0.6 W. . . . . . . . . . . . . . . . . . .

N package 1.3 W. . . . . . . . . . . . . . . . . . . .

Storage temperature range, T

stg

–65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

†

Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.

2. The maximum package power dissipation is calculated using a junction temperature of 150_C and a board trace length of 750 mils, except for the N package, which has a trace length of zero.

+ 3 hidden pages