Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.
Description
3 4
2
1
5
6
7
16
15
14
13
17
13. AC SOCKET
14. FM ANTENNA
15. AUX INPUT
16. HEADPHONES JACK
17. VOLUME+ BUTTON
18. VOLUME- BUTTON
EQ
REPEAT/
MEMORY
889
1. SD SLOT
2. FUNCTION SELECT
3. PLAY/PAUSE/TIME BUTTON
4. USB PORT
5. STAND-BY BUTTON
6. EQ BUTTON
7. REPEAT/MEMORY BUTTON
8. LEFT&RIGHT SPEAKER
9. LCD DISPLAY
10. STOP BUTTON
11. NEXT BUTTON
12. BACK BUTTON
18
10
11
12
20
19
21
19. P-DN/-10 BUTTON
20. P-UP/+10 BUTTON
21. BATTERY COMPARTMENT
DOOR
2
Instruction manual
Utilization of the product
If you want to dispose of this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.
Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.
Important safeguards
• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer to the
manual. Keep the manual for future use.
• Do not hit or drop the unit.
• Do not expose the unit to vibration, direct
sunlight, too high or low temperatures or
humidity.
• If you are not going to use the unit within
a long period of time, remove the batteries to
avoid their leakage.
• Do not disassemble the unit yourselves.
Refer servicing to qualified service personnel.
Power supply
Battery operation
• Open the battery compartment cover.
Insert 6 x 1.5V LR14, UM-2 batteries (not included). Please
observe correct battery polarity or the unit will
not work. Close the battery compartment cover.
• When the batteries are exhausted, they
should be replaced.
• Do not recharge or heat the batteries.
Uncharged batteries is not a reason for
contacting a repair service.
• Disconnect power cord from the socket,
when the unit is on battery supply. Battery
power is automatically disconnected when the
power cord is connected to a power socket.
AС operation
• Before first plugging the appliance check
that voltage indicated on the rating label
corresponds to the mains voltage in your home.
• Insert the plug of the power cord into a
power supply socket.
General operations
Standby mode
• After the unit is connected to the power
source or the battery is inserted, it is in standby
mode; the clock is shown on the display. Press
STAND-BY button to switch it on
from the standby mode; press FUNCTION to
activate the radio mode.
• In the standby mode only clock function is
available.
Volume
To adjust the sound volume level, press
VOL+ and VOL- buttons.
Clock setting
In the standby mode press and
hold PLAY/PAUSE/TIME button on the device.
the hour digits will blink;
press BACK and NEXT buttons to
set hours. Press PLAY/PAUSE/TIME button again,
the minute digits will blink;
press BACK and NEXT buttons to
set minutes. Press the TIME button
again to confirm.
3
Instruction manual
Radio operation
• Press FUNCTION button to
enable the radio mode.
• Press and hold PLAY/PAUSE/TIME
button; the unit will automatically scan the
frequency range and save all available stations
in the memory (up to 30). When
the automatic search will be completed, the
unit will start broadcasting the first found
station. If you want to stop the search, press
PLAY/PAUSE/TIME button again.
• Press repeatedly BACK and
NEXT buttons to adjust the current frequency
manually.
• Press MEMORY button once, the memory
slot number will be displayed.
• Press P-UP or P-DN
buttons to select the desired number.
• Press MEMORY button to save that
station.
• Press P-UP or P-DN buttons to select a
saved station.
• Extend the FM antenna for a better signal
reception.
USB/SD operation
Playback
• Turn on the device
• Insert a USB device into the USB port or
SD card into the slot. Press FUNCTION
to switch to USB/SD mode, the USB/SD
icon will show in the top of the display. Or, if
afterwards you selected another mode, press
the FUNCTION button repeatedly to select the
USB mode.
• Playback of the first track will start
automatically. The display will show PLAY icon
in the top and the number of the track.
• Press PLAY/PAUSE/TIME button to pause
playback. Press the button again to resume
playback. Press STOP button to
stop playback; PLAY icon will disappear and
the display will show the total number of tracks.
• Press repeatedly BACK and NEXT buttons
to go to previous or next track. Press and hold
BACK or NEXT buttons for fast reverse
or fast forward playback; release the button
for normal playback.
• Press REPEAT button once (REP icon will
be displayed), the current track will be played
repeatedly. Press the button once again (ALL
icon will be displayed), all tracks will be played
repeatedly. Press this button again to return to
normal playback (ALL and REP icons are not
displayed).
• Press EQ to select an equalizer mode:
CLASSIC -> ROCK -> POP -> JAZZ -> FLAT.
4
4
Instruction manual
AUX jack
General USB/SD notes
According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.
Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.
• This unit is equipped with a USB socket
that can accept and play MP3 files stored on
standard USB flash (2.0 version)/SD cards up
to 32 GB.
• FAT and FAT32 file system is supported by
this unit.
You can connect the audio output of an
ex
ternal device to this unit, to listen to the sound
of that device through the speakers of this unit.
• To connect an external audio device, please
use a standard audio cable with 3.5-mm-to-3.5
mm plugs (not included) to connect the headphone
out or audio line-out of the external device to
the AUX input socket of this unit.
• Press FUNCTION button repeatedly to select
AUX mode; AUX icon will be displayed.
• Turn on the external device. You cannot control
playback with the buttons of this unit except
adjusting the volume.
Bluetooth operation
Bluetooth wireless playback
• This unit can wirelessly playback audio
from any device with Bluetooth A2DP
function.
• The wireless range is approximately within
10 meters.
• Wireless audio streaming requires pairing
of a Bluetooth device (e.g. smartphone).
HOW TO PAIR YOUR DEVICE TO THIS
UNIT:
• Make sure the Bluetooth function is
switched on in your device (e.g. smartphone,
tablet).
• Switch on the unit and press the
FUNCTION button repeatedly until
the display shows BT.
• You will find the unit listed in the
Bluetooth connections list of your device (as
TF-SRP3461B).
• If asked for a passcode, enter “0000”
• The initial setup is required only once
per device.
• After a successful pairing, you can
control the playback of audio files as
described in the USB/SD operation section.
5
5
Instruction manual
Maintenance and care
Switch off the appliance, unplug from the power supply. The outside of the appliance can be
cleaned with a slightly damp cloth.
Accessories
USB/SD radio player
Power cord
Instruction manual
1 pc
1 pc
1 pc
Specifications
FM frequency range
Presettable stations
Battery power supply
Nominal power consumption
Output power
Nominal voltage
Supported audio playback format
Net/Gross weight
Unit dimensions
Specifications and functions are subject to change without notice. It is connected with continual
improvement of the device.
64 - 108 MHz
30
9 V (6 х UM2/LR-14 batteries 1.5 V)
13.5 W
2 x 1.8 W
220 V ~ 50 Hz
MP3
0.7 kg/1 kg
216 mm x 203 mm x 113 mm
6
6
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.