Telefunken TF-PS2203 User Manual

PORTABLE MINI MUSIC SYSTEM WITH
BLUETOOTH
ПОРТАТИВНАЯ МУЗЫКАЛЬНАЯ MINI СИСТЕМА
С BLUETOOTH

TF-PS2203

Instruction manual

Руководство по
эксплуатации

Instruction manual

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in future.

Description

Top panel

1. DISPLAY

2. PAIR INDICATOR

3. CHARGE INDICATOR

4. P-MODE/M. BUTTON

5. /TUN.- BUTTON

6. LIGHT BUTTON

7. FOLDER/10/M. - BUTTON

8. PLAY/PAUSE/PAIR/SCAN
BUTTON

9. /TUN.+ BUTTON

10. POWER SWITCH

11. FUNCTION BUTTON

12. FOLDER/10/M. + BUTTON

13. VOLUME KNOB

14. GUITAR VOLUME KNOB

15. TREBLE KNOB

16. BASS KNOB

17. MIC ECHO KNOB

18. MIC VOLUME KNOB

19. USB PORT 2

20. 6.3MM MIC JACK

21. 6.3MM GUITAR JACK

22. 3.5MM AUX IN JACK

23. USB PORT 1

24. HANDLE

Front and back panels

25. LED LIGHT

26. TWEETER

27. SPEAKER

28. SPEAKER GRILL

29. AC SOCKET

30. VENTILATION HOLES

3

Instruction manual

Utilization of the product

If you want to dispose this product, do not
mix it with general household waste. There is a
separate collection system for used electronic
products in accordance with legislation that
requires proper treatment, recovery and
recycling.

Please contact your local authorities for
the correct method of disposal. By doing so,
you will ensure that your disposed product
undergoes the necessary treatment, recovery
and recycling and thus prevent potential
negative effects on the environment and
human health.

Important safeguards

• The instruction manual contains important
operating and maintenance instructions. For
your safety, it is necessary to refer the manual.
Keep the manual for use in future.

• Do not hit or drop the unit.

• Do not expose the unit to vibration, direct
sunlight, too high or low temperature or humidity.

• Do not disassemble the unit yourself.
Refer servicing to qualified service personnel.

Power supply

• The unit operates on an internal
rechargeable lead-acid battery.

• The battery can be recharged with
the provided AC power cord. Before first
plugging the appliance check that voltage
indicated on the rating label corresponds to
the mains voltage in your home.

• Insert the power cord into the
AC power input socket at the back of the unit.

• Plug the power cord into the wall outlet.

• The charging LED indicator will light in

red.

• When the battery is fully charged
(around 5 hours), the LED indicator will
turn to green. When the charge is low the
red LED will flash.

• For best results, try to fully charge the
battery before each use. If the battery is
drained, please allow it to recharge for a few
hours.

General operations

Power on/off

Press the POWER button to switch the unit
on. Press this button again to switch the unit
off.

Modes of operation

Press the FUNCTION button repeatedly to
select an operation mode: USB1 => USB2
=> BLUETOOTH => AUX => RADIO.

Volume control

Rotate the volume knob to adjust the general

volume level of the unit.

You can also separately adjust the volume of

microphone (if connected) or guitar (if

connected) by rotating the microphone or
guitar volume knobs.

Bass adjustment

Rotate the BASS knob to increase and

decrease the bass effect.

Treble adjustment

Rotate the TREBLE knob to increase and

decrease the treble effect.

LED lighting

Press repeatedly the LIGHT button to switch
between various lighting modes of the LED
disco lighting.

- L-1: Default mode, blue LED is on.

- L-2: Blue LED is flashing.

- L-3: Red LED is on.

- L-4: Red LED is flashing.

- L-5: 7 colors LED are flashing.
Press LIGHT one more time to turn the lighting
off.

4

Instruction manual

There are also 5 modes for the decoration LED
lighting around the speakers. Press and hold
the LIGHT button to choose the light modes.

- E-1: Default mode, blue LED is on.

- E-2: Blue LED is flashing.

- E-3: Red LED is on.

- E-4: Red LED is flashing.

- E-5: 7 colors LED are flashing
alternatively.
Press and hold LIGHT one more time to turn
the decorative lighting off.

Radio operation

Press the FUNCTION button on the unit, the
display reads FM and the radio frequency.

Note: in order to get the best reception, extend
the FM antenna on the rear of the unit before
use to its full length.

Tuning to a radio station

If you know the station frequency that you want
to tune to directly:

 Tune to a station by pressing

or TUN.­search upward or downward. The station
frequency is shown on the display.

To tune to a preset station:
 To tune to the next preset station, press

the FOLDER/10/M. + button.

 To tune to the previous preset, press the

FOLDER/10/M. - button.

buttons repeatedly. Hold them to

the TUN.+

Automatic scanning and storing

To scan for stations within reception range
and save them to preset memory
automatically, press and hold the SCAN
button. Once the scanning is finished, the unit
will automatically tune to Preset 1 (P01).

Manual storing

Choose which stations to save in preset
memory instead of scanning automatically.

1. Use the TUN.+ or TUN.- buttons to tune to
the station you want to save as a preset
(e.g., 93.1).

2. Press the P-MODE/M. button. “P01” will
flash on the display to indicate that you are
saving the station as Preset Memory 01.(To
change the preset memory number, press
the FOLDER/10/M. + or FOLDER/10/M. -
buttons.)

3. Press the P-MODE/M. button to finish
saving the station (e.g., P01 is now set to

93.1).

4. To save another station, repeat steps 1 to

3. You may save up to 30 FM stations.

USB operation

USB playback

• Insert a USB storage device into one
of the two USB ports of the unit. Press
the FUNCTION button to select the
USB1 or USB2 mode. The unit will
start reading the device and start
playback if any supported audio
found.

files are

Playback operations

• During playback press the PLAY/PAUSE
button on the unit to pause playback. Press
this button again to resume playback.

• During playback press TUN.-/TUN.+
buttons to go to a previous or a next track.

• Press and hold the TUN.-/TUN.+

4

buttons to quickly go to a particular point in a
track backwards or forwards.

• To select a song which track
number exceeds 10, press the FOLDER/10/
M.+ or FOLDER/10/M.- button each time to
skip forward/backward 10 tracks, then press
the TUN.+ or TUN.-button to select a desired
track.

• To select a desired folder (if
the USB contains more than one folder),
press and hold the FOLDER/10/M.+ or
FOLDER/10/M.- button each time to skip
forward/backward a folder, then press the
TUN.+ or TUN.- button to select a desired
track.

5

Instruction manual

 Press the P-MODE/M. button

during playback. With each press the
unit will repeat: one track, folder (if the
USB has more than one folder), all
tracks or play a random track.

General USB notes

• This unit is equipped with USB ports
that can read and play MP3 files stored on
standard USB flash drives (compatible with
USB version 2.0) up to 32 GB.
Always switch off the unit or change
mode to another one before removing a USB
flash drive or SD card, to prevent damage to
your USB device or memory card.

Note: Although this product is fully

compatible with USB 2.0 standard formats, a
small percentage of USB flash drives might not
be readable, due to those device manufacturers’
non-compliance with the full (official) USB
standards.

• FAT and FAT32 file system are
supported by USB ports of this unit.

According to the USB 1.1/2.0 standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power
for connected USB drives with power
consumption exceeding this value as well as
defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warranty cases.
Warning: use of external USB drives
containing BIN files in root directory may
cause malfunction of unit or damage to the
software.

Bluetooth operation

• The Bluetooth pairing name of the unit is
TF-PS2203.

• Press the FUNCTION button on the top
panel to switch to the Bluetooth mode.

• Use your mobile phone to search the
Bluetooth signal of the unit, then input the
password 0000 if necessary. The units
are paired when "bt" appears on the
screen.

• Switch off the Bluetooth function on your
mobile phone to disconnect the units.
When paired successfully for the first
time, this unit will automatically connect
the paired device when it switches on.

• Effective connection range is 10
meters.

••You can unpair the devices by

deleting the TF-PS2203 Bluetooth
connection from your mobile phone
connected devices list or by
pressing and holding the PAIR
button in Bluetooth mode.
In Bluetooth mode you can control
playback and volume using the
standard control elements of this
unit.

Microphone

• You can insert a microphone for karaoke
or other purposes into this unit by
connecting it to the MIC 6.3mm
microphone input jacks.

• While connected, you can control the
microphone volume by rotating the
corresponding knob, and add an echo
effect by pressing the ECHO button.

Guitar

• You can connect a guitar to this unit by
connecting it using a special 6.3
to the Guitar input.

• While connected, you can control the guitar
volume by rotating the guitar volume knob.

mm cable

6