Telefunken TF-LED40S61T2 User manual

LED TV
Телевизор цветного изображения
c жидкокристаллическим экраном

TF-LED40S61T2

Instruction manual

Руководство по
эксплуатации

Table of contents

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

Table of contents
Before you start

Utilization of the product
Important safeguards
Installation

Base installation
Wall mounting

Connection

Outdoor antenna connection
Other connections

Operation

Control elements

Front panel

Back panel
Remote controller

Changing the battery
General operations
Signal sources

OSD operation

Channel menu
Picture menu
Sound menu
Time menu
Setup menu
Lock menu

Screen setting
Electronic programme guide

Digital programme recording

TimeShift function
CI information

USB operation

Background information
Operations of file playback

General information

Troubleshooting

Causes of interference
Accessories
Specifications

2
3
3
3
4
4
4
5
5
5
6
6
6
6
7
7
8
8
9

9
10
10
10
11
11
12
12
12
13
13

13
13

14
15
15
15
16
16

2

Before you start

Utilization of the product

If you want to dispose of this product, do not mix it with general household waste. There
is a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.

Before you start

Important safeguards

• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.

• This unit can be connected to a power
supply outlet without the third ground contact
as well as with a ground contact.

• Always disconnect the power cord and
antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.

• When unplugging the plug, always hold the
wide slot, do not touch the metal part, and do
not destroy, twist, pull or roast the power cord.

• Please contact the service center
immediately if you found that the core is
showed in the air or has been broken.

• Please replace the AC outlet if the metal
bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of non­designated capacity may cause the fire due to
the generation of heat.

• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.

• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.

• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.

• Over-press the panel may destroy the
product.

• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.

• Please place the product on a flat surface
in a well-ventilated location. Keep it away from
the burning-light, direct sunlight, vibration,
high-temperature and humidity.

• Do not place any vase, potted plant, cup,
medicine and any container with water on this

3

Before you start

Before you start

product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.

• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.

• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.

• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left, and right of the TV.

• Please place all the signal cords behind of
rear panel.

• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LED TV up or down display direction.

• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, damaged power
cord, connection cable or connection terminal
may cause fire, electric shock or breakdown.

• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it may damage it.

• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat
exchange in normal working mode, thus please
do not let children or anyone who is sensitive
of temperature to touch.

All images provided herein are schematic

drawings and may differ from real objects.

Installation

Base installation

Cover a flat stable surface with a soft
cloth. Place the TV unit facedown on the
cloth. Insert the base supports into the
lower back panel of the unit and fasten with
4 screws 4*15BBH.

Wall mounting

• For wall mounting the back panel of this

unit is equipped with 4 screw holes (spread
distance 200x200mm). A VESA wall-mount
bracket should be used for wall mounting (the
bracket is not included and should be acquired
separately). Manufacturer is not responsible
for improper mounting resulting in damage of
the unit.

WARNING
In order to avoid damage, make sure
to secure the unit on the wall
according to the wall mounting
instruction.

4

4

Wall or ceiling mounting implements must
be durable and sufficient enough to support
the weight of the unit.

Connection

Before you start

Before you start

Antenna cable connector

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.

Other connections

• Connect the video source to the

miniAV input using the special cable.

• Component input YPbPr is
intended to receive component video signal
from the external device. Connection is made
with the help of a special component cable.

• Plug the power cable in the electric outlet,
making sure the current voltage is supported.

• When using the LED as a computer
screen, connect the PC to the VGA jack from

TVRF antenna jack

the monitor by the relevant cable (not included).

• If the video source has a HDMI output jack,
you can connect the signal to the monitor by
the HDMI cable (not included).

• Coaxial output is intended for transmitting
multi-channel sound to an external decoder
(e.g. in 5.1-CH format). Coaxial cable should
be used for connection.

• PCMCIA slot is used for CI modules that
are obtained from your digital TV provider.

• Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.

5

5

Operation

Operation

Control elements

Front panel

1. POWER button

2. SOURCE button

3. MENU button

4. VOL- button

5. VOL+ button

6. CH- button

7. CH+ button

8.

IR sensor

9. LED indicator

Back panel

1. Headphones socket

2. USB port

3. CI+ slot

4. YPbPr (Mini) input

5. AV (Mini) input

6. Coaxial output

7. HDMI inputs

8.

TVRF antenna input

9. SCART input

10. PC audio input

11. PC video input (VGA)

6

VGA PC AUDIO SCART RF HDMI1

1011

Headphone

5V 0.5A

HDMI2 HDMI3 COAXIAL AV YPbPr CI+ USB

6

Remote controller (RC)

Operation

1. POWER: turn on the TV/Standby.

Operation

1

3
4

6

7

9

10

13

15

16

18
19
22
23
26
27

2. AUDIO: switch the audio channel of the video (if supported).

2

5

8

11
12

14

17

20
21
24
25
2828

29

I/II: in the TV condition, press this button to select the stereo mode.

3. SLEEP: auto power off timer.

4. SUBTITLE: select a subtitle for a video file (if supported).

5. FAV: show the list of favorite channels.

6. NUMBER KEYS: change the channel directly.

7. DTV/RADIO: in DTV mode, press this button to enter DTV or RADIO mode.

8. (RETURN): return to a previously watched channel.

9. MUTE: mute or restore the sound.

10. VOL: increase and decrease volume.

11. CH: go to the next or previous channel.

12. REPEAT: repeat mode.

13. INFO: show information about the current program.

14. SOURCE: select signal source.

15. NAVIGATION KEYS (Up, Down, Left, Right and OK): navigate the menus and
confirm settings.

16. MENU: main menu.

17. EXIT: exit any menu.

18. P.SIZE: select different picture sizes.

: display index page in Teletext mode.

19. GUIDE: open Electronic Program Guide.

: reveals hidden information such as quiz answers in Teletext mode.

20. P.MODE: select picture mode.

: display top, bottom or whole page in Teletext mode.

21. S.MODE: select sound mode.

: freeze multi-page changing in Teletext mode.

22. TS: in DTV mode, press this button to start the Timeshift function, press PLAY/
PAUSE to delay program, press STOP to stop the Timeshift function.

: play/pause.

23. STOP/ : stop playback.

24. TEXT: turn the Teletext mode on or off.

25. REC/ : in DTV mode, press this button to start recording, press again to stop.

26. : previous file or chapter.

27. : next file or chapter.

28. : fast forward playback.

29. : rewind playback.

Press the corresponding color button to directly access
contextual functions in TELETEXT or EPG OSD mode.

7

7

Operation

on the back of the RC.

compartment making sure that the correct
polarity is observed.

should be pointed at remote sensor within 8
meters and within 30 degrees at the left or the
right side.

used for a long time.

different types of batteries. Weak batteries can
leak and severely damage the RC.

and do not place it in an area with high
humidity.

Operation

Changing the battery

1. Remove the battery compartment cover

2. Insert the batteries into the battery

3. Install the cover back.

1 2 3

• Use two AAA batteries for the RC. The RC

• Take the battery out of the RC if it is not

• Do not mix new and used batteries or

• Do not expose the RC to shock, liquids,

General operations

• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number directly.

• Press INFO button to display the preset
TV channel play information.

• Press AUDIO button in TV mode repeatedly to
switch between various Nicam sound modes
(can be unavailable for some channels). This
function is optional.

Signal sources

Press the SOURCE button, then press
DOWN/UP cursor buttons on the RC or CH
+/CH- buttons on the panel to select a
source from available source list: DTV =>
ATV => AV => PC => SCART =>
COMPONENT => HDMI 1 => HDMI 2 =>
HDMI 3 => MEDIA.

Press OK button on the RC to confirm.

Power

• Connect the plug of the power cord to the
mains socket.

• Do not leave your TV in standby mode for

a long period of time; if you are not going to
use the unit, disconnect it from power supply.

• In TV mode the unit will automatically go to

standby mode if no signal for 5 minutes.

Operations

• Press VOL- button repeatedly to decrease

the volume; press VOL+ button repeatedly
to increase the volume.

• Press MUTE

again or increase volume to resume sound.

• Press RETURN button on the RC to select

from the present channel and the previously
displayed channel.

8

8

to mute sound, press this button

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the
RC or VOL+/VOL- buttons on the panel to go
to the needed setting page.

3. Press UP/DOWN cursor buttons on the
RC or CH+/CH- buttons on the panel to select
a parameter to adjust.

4. Press LEFT/RIGHT buttons on the RC or
VOL+/VOL- buttons on the panel to adjust the
selected parameter.

5. Press MENU button to return to the root
menu or exit menu setting.

Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.

Channel menu

CHANNEL

Auto Tuning
DTV Manual Tuning
ATV Manual Tuning
Programme Edit
Schedule List
Signal Information
CI Information

Select
Press “OK” to select
Press “MENU” to return

• Auto Tuning: press OK buttons to select
the country and tune type for channels to start
automatic search and saving of available ATV
channels. After the search is finished, the unit
will skip to searching DTV channels, Radio
channels and Data. During the ATV search,
press MENU button to skip to DTV, Radio and
Data search.

• DTV Manual Tuning: Press LEFT/RIGHT
cursor buttons to select channel number. Press
OK button to start searching. When the nearest
available channel is found, the search will
stop and the channel will be saved under the
selected number. Press MENU button to quit.

Operation

ATV Manual Tuning:

•
Current CH: select channel number.
Color System: select corresponding color
system.
Sound System: select corresponding sound
system.

Fine-Tune: perform fine adjustment of
the current frequency.
Search: press LEFT/RIGHT buttons;
the unit will search for next available
channel downward or upward and save it
under the current number.

• Programme Edit: this item allows
you to sort TV programs according to
your preferences. Enter the program edit
menu:

Delete: Select the channel you want to delete.

Press red button to delete the channel.

Move (not available for DTV channels with
LCN): Highlight the needed channel. Press
yellow button; select the position to put the
channel into. Press yellow button to confirm.

Favorite: Select the channel you want to
edit. If this channel is your favorite channel,
you can add it to your favorite channel list by
pressing the FAV button.

Highlight the needed channel. Press

Skip:
blue button; now this channel will be skipped
when you select previous/next channels.

• Signal Information: View the information

on the current signal.

• CI Information (only in DTV mode): This
function enables you to watch some encrypted
services (pay services). Please insert a CI card
into the PCMCIA slot according to the arrow on
the CI card.

• The function can only be gotten when

CI slot is available.

• It is possible for you to change CI
(Common Interface) menu screen and service
by consulting your dealer.

• Please do not insert or pull out the CI card
when power on. During initialization of the CI
card, please don’t operate the TV.

• Do not insert or pull out the CI card
frequently so as to avoid any damages of the
TV and the CI card.

9

Operation

9

Operation

Operation

Picture menu

PICTURE
Picture Mode
Contrast
Brightness
Colour
Tint
Sharpness
Colour Temp
Noise Reduction
HDMI Mode

Select
Press “OK” to select
Press “MENU” to return

• Picture Mode: Standard/Mild/Personal/
Dynamic. When Personal mode is selected,
you can adjust contrast, brightness, colour,
sharpness and tint (in NTSC) of the image.

• Colour Temp: Standard/Cold/Warm.

• Noise Reduction: Dynamic noise
reduction effect for reducing the video noise
level. Select the Off/Low/Middle/High/Default
mode.

• HDMI Mode: adjust the picture settings
when HDMI is selected as a source signal.

• Balance

: adjust the balance between the

left and the right speaker.

• Auto Volume Level:

reduce the
difference between channel and program
volume automatically.

• SPDIF Mode: Select the digital audio

output mode: Auto/PCM/Off.

• AD Switch (in DTV mode): This is an
auxiliary audio function that provides an
additional audio track for visually challenged
persons. This function handles the Audio
Stream for the AD (Audio Description), when
it is sent along with the Main audio from
the broadcaster. Users can turn the Audio
Description On or Off and control the volume.

Time menu

TIME

Clock

Time Zone
Sleep Timer

Auto Standby
OSD Timer

Sound menu

SOUND

Sound Mode

Treble

Bass

Balance
Auto Volume Level
SPDIF Mode
AD Switch

Select
Press “OK” to select
Press “MENU” to return

• Sound mode: Standard/Music/Movie/
Sports/Personal. When Personal mode is
selected, you can adjust treble and bass.

10

10

Select
Press “OK” to select
Press “MENU” to return

• Clock: You can display either the DTV

signal stream time or set the system time.

• Time Zone: select your time zone.

• Sleep Timer: select the period until

automatic switch-off of the unit.

• Auto Standby:

select the period after
which the TV turns off automatically if no input
is given.

• OSD Timer: select the time during

which the OSD menu stays visible.

Operation

Setup menu

SETUP
Language
TT Language
Audio Languages
Subtitle Language
Hearing Impaired
PVR File System
Aspect Ratio
Blue Screen
First Time Installation

Reset
Software Update (USB)
Environment
HDMI CEC

Select
Press “OK” to select
Press “MENU” to return

• Language: select the language of

the on-screen display (OSD).

• TT Language: select the language of

the Teletext.

• Audio Languages: select the language

of audio (available for some DTV channels).

• Hearing Impared: When Hearing Impaired
is on, the screen will give some information to
people whose hearing is impaired. When Off,
the information will be hidden.

• PVR File System (in DTV mode):

Select Disc: select the storage used for PVR.
Time Shift Size: select the time for Time

Shift.

Format: format the USB.
Speed Check: display the speed of the

storage.

• Aspect ratio: select the screen aspect
ratio.

• Blue Screen: enable or disable a
blue screen showing when the TV signal is
weak.

• First Time Installation: run the

initial setting procedure.

• Reset: restore TV settings

to their initial factory defaults.

• Software update (USB): Update TV

software using a USB storage device.

• Environment: select an environment
where the TV is used. It affects the power
consumption.

• HDMI CEC: switch the HDMI

Consumer Electronic Control feature on or off.

Lock menu

LOCK

System Lock

Set Password

Channel Lock

Parental Guidance

Key Lock

Hotel Mode

Select
Press “OK” to select
Press “MENU” to return

• System Lock: The feature can prevent
unauthorized operation of the TV set unless
entering a 4-digit password. When Lock
System is on and the system is locked, you
must input the system password at Auto
Tuning, Manual Tuning, Programme Edit or
Default. Press the right number buttons for
the password. The default password is

0000.

After a password correction has
been confirmed, please remember it for
entering into the Parental Guidance menu,
all functions can not be activated until the
correct password is entered.

• Set password: You can set your private
password. Press the number buttons on the
remote control to set the new password.
When the new password has been put in
twice, the setting is finished successfully.
The TV will go back to previous menu.

Operation

11

11

Operation

Operation

• Channel Lock
Green button to lock the available channel you
want. Press Green button again to unlock it.

• Parental Guidance
to age-restricted content.

• Key Lock: lock and unlock the
buttons on the TV set.

• Hotel Mode:
is enabled, the main menu is blocked. You can
still control the volume as well as picture and
sound modes, but channel search is restricted.

(in TV/DTV mode): Press

: set the access

when the Hotel Mode

Screen setting (only in PC mode)

SCREEN

Auto Adjust

H-Offset

V-Offset

Size

Phase

Position Reset

Select
Press “OK” to select
Press “MENU” to return

• Screen Setting (only in PC mode):
Auto adjust: automatic setting of the

parameters.

Horizontal Offset: adjust horizontal position of

the image.

Vertical Offset: adjust vertical position of

the image.

Size: adjust the image frequency manually.
Phase: adjust the phase manually.
Position Reset: reset the screen adjustment

Electronic Programme Guide

(in DTV mode)

Press the GUIDE button to display the
Programme Guide menu. This function gives
you the detailed information of the channel,
indicating the time of the program playing.
From the Programme Guide it is possible to
check the program information for the next
eight days (If the information is available from
the broadcaster). Press EXIT button to quit.

• Record: Press Red button to set the
parameters of recording, The unit is able to do
schedule recording when TV is turning on or in
standby mode. You can set up several
schedule recording. Different schedules should
not overlap. When recording starts in standby
mode, the front indicators will change color and
there will be no picture or sound from the unit.

You can press the POWER button to light up

the screen.

• Info: Press the INFO button to see
the detailed information of the current channel.

• Remind: If you find the desired program
which will be shown in the future. Press
the green button to book program.

Digital program recording

Insert a USB, the system will automatically
create a folder to store the files recorded.
Recording begins when REC button is
pressed, and it records all the time until STOP
button is pressed or the memory is full.

12

12