Telefunken TF-LED39S8 User manual

LED TV/
Телевизор цветного
изображения c
жидкокристаллическим
экраном

TF-LED39S8

Instruction manual

Table of contents

Руководство по
эксплуатации

3

Table of contents

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

Table of contents
Before you start

Utilization of the product
Important safeguards
Connection
Installation

Stand installation

Wall mounting

Operation

Control elements

Front panel

Back panel
Remote controller(RC)

Changing the battery

General operations

Signal sources
OSD operation

Picture setting
Sound setting
OSD setting

TV setting
USB operation

General operations of file playback

General information

Troubleshooting

Causes of interference
Accessories
Specifications

2
3
3
3
4
5
5
5
6
6
6
6
7
7
8
8
8
9
9
9

9
10
11
12
12
12
13
13

2

2

Before you start

Utilization of the product

If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.

Before you start

Important safeguards

• Before connecting the AC power cord to
the mains supply outlet, make sure that the
voltage designation of the unit corresponds to
the local electrical supply.

• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.

• This unit should only be connected to a
wall socket having grounding.

• Always disconnect the power cord and
antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.

• When unplugging the plug, always hold
the wide slot, do not touch the metal part, and
do not destroy, refit, twist, pull or roast the
power cord.

• Please contact the service center
immediately if you found that the core is
showed in the air or has been broken.

• Please replace the AC outlet if the metal

bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of non­designated capacity may cause the fire due to
the generation of heat.

• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.

• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.

• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.

• Over-press the panel may destroy the
product.

• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.

• Please place the product on a flat surface
in a well-ventilated location. Keep it away from

3

3

Before you start

Before you start

the burning-light, direct sunlight, vibration,
high-temperature and humidity.

• Do not place any vase, potted plant, cup,
medicine and any container with water on this
product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.

• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.

• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.

• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at list 10 cm at
above, left, and right of the TV.

• Please place all the signal cords behind of
rear panel.

• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LCD TV up or down display direction.

• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, the damaged
power cord, connection cable or connection
terminal may cause the fire, the electric shock
or breakdown.

• 2 persons or more shall transport the
device, if it is heavier than 18 kg. If you drop or
tip over the device, it may damage it.

• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.

All images provided herein are schematic
drawings of real objects and may differ
from their real images.

Connection

• Connect the power cord plug to a power

supply source.

• Connect a video source to the Composite

video input jack with RCA cable.

• Connect the audio sources (Including
DVD, VCDR, CAMCORDER and PC) to the
proper Audio input jacks ‘L’ and ‘R’.

• Connect a TV or CATV antenna to the
antenna jack.

• Connect PC audio input to PC main unit
with related audio cable in PC mode.

• If the video source has a HDMI output
jack, you can connect the signal to the monitor
by the HDMI cable (not included).

• When using the LED as a computer
screen, connect the PC to the VGA jack from
the monitor by the relevant cable (not included).

• Component input is intended for receiving
component video signal if connected to the
component output of external signal source.

4

4

Installation

Stand installation

Insert the stand supporting element to
supporting hole on the back panel of the
unit body, aline the supporting element and
supporting hole centre

Before you start

Before you start

Fasten the screw.

Wall mounting

For wall mounting the back panel of this
unit is equipped with 4 screw holes (4 mm
diameter, 200 mm horizontal spread distance
x 100 mm vertical spread distance). A
wall-mount bracket should be used for wall
mounting (the bracket is not included and
should be acquired separately). Manufacturer
is not responsible for improper mounting
resulting in damage of the unit.

5

5

Operation

Operation

Control elements

Front panel

1

1. IR sensor and Power indicator

Back panel

1. SOURCE button

2. CH+/CH- buttons

3. VOL+/VOL- buttons

4. Power cord

5. Power switch*

6. MENU button

7. STANDBY button

8. USB-1 port

9. USB-2 port

10. Antenna jack

11. HDMI-1 input

12. Headphone output

13. VGA input

14. Audio stereo input for
Component video and for
Composite video input-2

15. PC audio input

16. Y jack of Component input/
Composite input-2

17. Pb/Cb and Pr/Cr jacks
of Component input

18. Video output

19. Audio stereo output

20. HDMI-2 input

21. Audio stereo input for Composite video
input-1

22. Video input for Composite video input-1

1

2

3
4

5

6

7

20

21

22

8

9

10

11

12

13
14
15

16
17

18
19

*Positions of the Power switch:

power on power off

6

6

Operation

Remote controller (RC)

1

2

3
4
5

6
7

8

9

10

11

12

13

14

15

1. POWER button

2. P/N button

3. COLOR button

4. NEXT button

5. PREV. button

6. PLAY button

7. PAUSE button

8. Number buttons (Alphabetic function is
unavailable for this model)

Operation

9. RETURN button

29
28

27

26
25

10. VOL+/VOL- buttons

11. INFO button

12. SOURCE button

13. F1 button

14. OK button

15. SMART S. button

16. SMART P. button

17. Cursor (UP/DOWN/LEFT/RIGHT) buttons

18. MENU button

19. AUDIO button (option)

20. 16:9 button

24

21. TIME button

22. MUTE button

23. CH+/CH- buttons

24. PROGRAM LIST button

23

22

21

20
19

18

25. STOP button

26. ROTATE button

27. FWD. button

28. REV. button

29. Buttons not operable

Changing the battery

17

16

1. Remove the battery compartment cover

on the back of the RC.

2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.

3. Install the cover back.

• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.

• Take the battery out of the RC if it is not
used for a long time.

• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

7

7

Operation

Operation

General operations

• Press Power switch on the unit to switch
the power on. The unit will be in stndby mode.
Press POWER on the RC or Standby button
on the unit to switch on the unit from standby
mode. Press Power switch on the unit to switch
off power. When the unit is on, press POWER
button on the RC to switch the unit to standby.

When no signal input for 5 minutes, the

unit will switch to standby mode automatically.

• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.

• Press TIME button repeatedly to set the
sleep time (from 0 to 240 min).

• Press RETURN button on the RC to select
from the present channel and the previously
displayed channel.

• Press 16:9 button repeatedly to select
a screen display size from the available list:
FULL => 4:3 => SUBTITLE => FILM. Available
aspects may differ for different signal sources.

• Press MUTE button to cut off sound, press
this button again or adjust volume to resume
sound.

• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number directly.

• Press SMART P. button repeatedly to
cycle through the available video picture
modes from the following types: Standard =>
Soft => User => Bright.

• Press SMART S. button repeatedly to
cycle through the available sound modes from
the following types: Standard => Music =>
Movie => User.

• Press INFO button to display the preset
TV channel play information.

• Press P/N button to select PAL/NTSC/
SECAM/Auto color system.

• Press COLOR button to select Standard/
Warm/Cool color temperature mode.

• Press F1 button to freeze the picture on
or off.

• Press PROGRAM LIST button to scan or

set program list.

• Press AUDIO button in TV mode
repeatedly to switch between various Nicam
sound modes (can be unavailable for some
channels). This function is optional.

Signal sources

Press SOURCE button, then press DOWN/
UP cursor buttons on the RC or CH+/CH­buttons on the panel to select a source from
available source list: TV => AV1 => AV2 =>
YPbPr => PC=> HDMI1 => HDMI2 => USB1
=> USB2. Press OK button on the RC or
MENU button on the panel to confirm.

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the
RC or VOL+/VOL- buttons on the panel to go
to the needed setting page.

3. Press UP/DOWN cursor buttons on the
RC or CH+/CH- buttons on the panel to select
a parameter to adjust.

4. Press LEFT/RIGHT buttons on the RC or
VOL+/VOL- buttons on the panel to adjust the
selected parameter.

5. Press MENU button to return to the root
menu or exit menu setting.

Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real pictures.

8

8

Operation

Picture setting

Picture mode
Contrast
Brightness
Saturation
Hue
Sharpness
Aspect ratio
Color temp.
Noise reduction

Adjust Select Menu:Exit

• Picture Mode: Standard/Soft/User/Bright.

• Contrast, Brightness, Saturation, Hue

(available only for NTSC system), Sharpness.

• Aspect ratio: Full/4:3/Subtitle/Film.

• Color temperature: Select color

temperaure mode of the picture - Standard/
Warm/Cool.

• Noise Reduction: Middle/High/Low/Off

level of noise reduction.

Sound setting

Sound mode
Treble
Bass
Balance
Auto volume

Adjust Select Menu:Exit

• Sound Mode: Standrard/Music/Movie/

User.

• Bass, Treble, Balance (adjust output

between left and right speakers).

• Auto volume: set the auto volume

correction on/off.

OSD setting

Operation

OSD language
OSD duration
OSD transparency
Blue screen
Sleep time
Recall

Adjust Select Menu:Exit

• OSD-Language: select the language of

the on-screen menu.

• OSD-Duration: set OSD menu display

time from 15 to 60.

• OSD-Transparency: adjust the halftone of

the OSD menu from 0 to 100.

• Blue screen: set on or off blue screen.

• Sleep-timer: set the sleep time in minutes

(from 0 to 240 minutes).

• Recall: reset the parameters to initial

factory settings.

TV setting

Color system
Sound system
Skip
Auto search
Manual search
Fine tune
Channel edit

Adjust Select Menu:Exit

• Color system: PAL/NTSC/SECAM/AUTO.

• Sound system: select sound system: I,

D/K, B/G.

• Skip: set on or off skipping a channel.

• Auto search: press RIGHT cursor button

9

9