Telefunken TF-LED39S32T2 User manual

LED TV/
Телевизор цветного
изображения c
жидкокристаллическим
экраном

TF-LED39S32T2

Instruction manual

Руководство по
эксплуатации

Table of contents

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

Table of contents
Before you start

Utilization of the product
Important safeguards
Installation

Base installation
Wall mounting

Connection

Outdoor antenna connection
Other connections

Operation

Control elements

Front panel

Back panel
Remote controller

Changing the battery

General operations

Signal sources

Teletext operations

OSD operation

Picture setting
Sound setting
Channel setting
Feature setting
Setup menu

USB operation

General playback information
Operations of file playback

Electronic programme guide (EPG)
General information

Troubleshooting

Causes of interference
Accessories
Specifications

2
3
3
3
4
4
4
5
5
5
6
6
6
6
7
7
8
8
8
9

9
10
10
11
11
12
12
12
13
14
14
14
15
15

2

Before you start

Utilization of the product

If you want to dispose of this product, do not mix it with general household waste. There
is a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.

Before you start

Important safeguards

• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.

• This unit can be connected to a power
supply outlet without the third ground contact
as well as with a ground contact.

• Always disconnect the power cord and
antenna during a storm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.

• When unplugging the plug, always hold the
wide slot, do not touch the metal part, and do
not destroy, twist, pull or roast the power cord.

• Please contact the service center
immediately if you found that the core is
showed in the air or has been broken.

• Please replace the AC outlet if the metal
bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.

• Never touch the antenna lie or power plug

if it stars to thunder.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of non­designated capacity may cause the fire due to
the generation of heat.

• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.

• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.

• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.

• Over-press the panel may destroy the
product.

• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.

• Please place the product on a flat surface
in a well-ventilated location. Keep it away from
the burning-light, direct sunlight, vibration,
high-temperature and humidity.

• Do not place any vase, potted plant, cup,
medicine and any container with water on this

3

Before you start

Before you start

product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.

• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.

• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.

• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left, and right of the TV.

• Please place all the signal cords behind of
rear panel.

• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LED TV up or down display direction.

• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, damaged power
cord, connection cable or connection terminal
may cause fire, electric shock or breakdown.

• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it may damage it.

• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.

All images provided herein are schematic

drawings and may differ from real objects.

Installation

Base instalation

Cover a flat stable surface with a soft cloth.
Place the TV unit facedown on the cloth. Align
the base with the holes on the back of the unit
and fix it with 4 PWA4*10mm screws.

Wall mounting

For wall mounting the back cabinet of this
unit is equipped with 4 screw holes. Spread
distance between the holes is 200*200 mm. A
VESA wall-mount bracket should be used for
wall mounting (the bracket is not included and
should be acquired separately). Manufacturer
is not responsible for improper mounting
resulting in damage of the unit.

Wall or ceiling mounting implements
must be durable and sufficient enough to
support the weight of the unit.

4

4

Connection

Before you start

Before you start

Antenna cable connector

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.

Other connections

• Connect the audio sources (Including
DVD, VCDR, CAMCORDER and PC) to the
proper Audio input jacks ‘L’ and ‘R’.

• Connect the video source to the
Composite video jack by RCA cable.

• Component input YPbPr is intended to
receive component video signal from the
external device. Connection is made with the
help of a special component cable. To receive
audio signal for component video, please use
the AV input.

• Plug the power cable in the electric outlet,
making sure the current voltage is supported.

• When using the LED as a computer
screen, connect the PC to the VGA jack from

TVRF antenna jack

the monitor by the relevant cable (not included).

• This unit has PC audio line in jack.
Connect this jack to PC main unit with related
audio cable in PC mode and adjust the volume
to what you want.

• If the video source has a HDMI output
jack, you can connect the signal to the monitor
by the HDMI cable (not included).

• Coaxial output is intended for transmitting
multi-channel sound to an external decoder
(e.g. in 5.1-CH format). Coaxial cable should
be used for connection.

• Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.

• PCMCIA slot is used for CI modules that
are obtained from your digital TV provider.

5

5

Operation

Operation

Control elements

Front panel

1. INPUT button 6. Power indicator

2. MENU button 7. Remote control sensor

3. VOL+/VOL- buttons

4. CH+/CH- buttons button

5. POWER/STANDBY button

Back panel

1. Headphone output

2. HDMI inputs

3. AV input

4. Mini YPbPr input

5. Coaxial output

6. USB port

7. Line in (PC audio)

8. VGA input

9. Mini AV input

10. PCMCIA slot

11. TVRF antenna
socket

6

6

Operation

Remote controller (RC)

1. POWER/STANDBY button

2. Number buttons

3. EPG button

4. ASPECT button

5. VOL+/VOL- buttons

6. DISPLAY button

7. Cursor (UP/DOWN/LEFT/RIGHT) buttons/
ENTER button

8. MENU button

9. PMODE button

10. SOURCE button

11. STOP (

12. PLAY/PAUSE ( ) button

13. NEXT ( ) button

14. PREVIOUS ( ) button

15. FORWARD ( )/SIZE button

16. BACKWARD ( )/INDEX button

17. REC button

18. REC.LIST button

19. MUTE button

20. FAV button

21. (RETURN) button

22. NICAM button

23. CH+/CH- buttons

24. EXIT button

25. SMODE button

26. SLEEP button

27. TEXT button

28. HOLD button

29. TV/RADIO button

30. MEDIA button

31. REVEAL button

32. SUBTITLE button

33. TIME SHIFT button

34. SUB.P button

35. Color buttons

) button

Changing the battery

1. Remove the battery compartment cover
on the back of the RC.

2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.

3. Install the cover back.

• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.

• Take the battery out of the RC if it is not
used for a long time.

• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

Operation

7

7

Operation

Operation

General operations

• Press POWER button on the unit or on
the RC to switch on the power. Press POWER
button again to switch the unit off and go the
the stand-by mode. To completely power off the
unit unplug the power cable from the outlet.

• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.

• Press SLEEP button repeatedly to set the
sleep time.

• Press EPG to launch the Electronic
Program Guide (EPG).

• Press TIME SHIFT to enable the Time
Shift function for digital TV.

• Press SUBTITLE to show and set the
language of a current DTV channel.

• Press REC to begin recording of current
playback in PVR mode. Press REC.LIST to
show the list of recorded files.

• Press button on the RC to select
from the present channel and the previously
displayed channel.

• Press ASPECT button repeatedly to select
a screen display size. Available aspects may
differ for different signal sources.

• Press MUTE button to cut off sound, press
this button again or adjust volume to resume
sound.

• Press TV/RADIO button to switch between
TV and radio modes when watching channels.

• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number directly.

• Press PMODE button repeatedly to cycle
through the available video picture modes.

• Press SMODE button repeatedly to cycle
through the available sound modes.

• Press DISPLAY button to display the
preset TV channel play information.

• Press FAV button to show the favourite
channel list.

• Press NICAM button in TV mode
repeatedly to switch between various Nicam

sound modes (can be unavailable for some
channels).

Signal sources

Press SOURCE button, then press DOWN/
UP cursor buttons on the RC or CH+/CH­buttons on the panel to select a source from
available source list: DTV - ATV - AV1 - AV2

- YPBPR - HDMI1 -HDMI2 - HDMI3 - PC ­MEDIA. Press ENTER button on the RC or
MENU button on the panel to confirm. Press
EXIT to exit.

TELETEXT operations (option)

• Select the TV source mode. Then press
CH-/CH+ buttons to select TV channel in order
to pick up the picture signal of Teletext.

• Press CH-/CH+ buttons to select the
previous page or the next page.

• Teletext button functions are as follows:

ON/OFF: Press TEXT button to enter into
TEXT mode. Press this button again to return
to the channel you are watching.

HOLD: Press this button to stop the move
to the next page. Press this button again to
cancel operation.

INDEX: Press this button to go to the index
page.

SIZE: Press this button to enlarge the text
shown on the teletext screen, and one half of
page could be shown. Press this button again
to view the second half of this page. Press this
button third time to normal size text page view.

REVEAL: Press this button to reveal the
cancelled information. Press this button again
to cancel the information.

SUB.P: Press this button to select sub page,
and the sub-page symbol will appear in the
left top hand corner of the screen. Enter the
number of sub page and use numeric buttons
in the format 0001 for sub page 1. The teletext
will search for the sub page.

RED/GREEN/YELLOW/BLUE buttons:
Press these 4 color buttons to access directly
to corresponding color page displayed at the
lower parts of teletext screen.

8

8

Operation

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the
RC or VOL+/- buttons on the panel to select
setting page.

3. Press DOWN cursor button or ENTER
button on the RC or CH+ button on the panel
to go to the parameter list.

4. Press UP/DOWN cursor buttons on the
RC or CH+/- buttons on the panel to select a
parameter to adjust.

5. Press cursor buttons on the RC or VOL+/­or CH+/- buttons on the panel to adjust the
selected parameter.

6. Press EXIT button to quit the menu.

Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.

Picture setting

Picture

Picture mode
Brightness
Contrast
Sharpness
Colour
Tint
Colour temperature
Aspect ratio
Noise reduction

Move

ENTER: Enter

• Picture Mode: Press UP and DOWN

buttons to select Picture Mode, then press
LEFT/RIGHT button to select one of the picture
modes: Dynamic, Standard, Mild, User). Press
PMODE to change the picture mode directly.

• Brightness/Contrast/Sharpness/Colour/

Tint: Press UP/DOWN to select the option,
LEFT/RIGHT to adjust.

Brightness: adjust the picture brightness.
Contrast: adjust the highlight intensity of the

MENU: ReturnEXIT: Exit

picture.

Sharpness: adjust the peak level of detail in

the picture.

Colour: adjust color intensity.
Tint: use to compensate color in NTSC

transmission.

• Color Temperature: change the overall

color temperature of the picture:

Standard: Default vivid color temp.
Cool: gentle blue-hued image.
Warm: bright red-hued image.

• Aspect Ratio: select the screen aspect

ratio: 4:3/16:9/Full/Zoom1/Zoom2/JustScan/
Cinema/Panorama/Auto.

• Noise Reduction: Digital noise reduction

effect for reducing the video noise level: Off/
Low/Middle/High.

Sound setting

Sound

Sound mode
Bass
Treble
Balance
AVL
SPDIF

Move

ENTER: Enter

• Sound Mode: Press UP and DOWN

buttons to select Sound Mode, then press
LEFT/RIGHT button to select one of the sound
modes: Standard, Movie, Music, Speech,
User). Press SMODE to change the sound
mode directly.

• Bass/Treble/Balance: Press UP/DOWN to

select the option, LEFT/RIGHT to adjust.

Bass: adjust the bass effect to increase or

decrease low-pitched sounds.

Treble: adjust the treble effect to increase or

decrease high-pitched sounds.

Balance: adjust the balance between left
and right speakers to adapt to your listening
position.

MENU: ReturnEXIT: Exit

Operation

9

9

Operation

Operation

• AVL : toggle auto-volume control on/off.

Volume automatically remains on the same
level of volume if you change programmes.
Because each broadcasting station has its
own signal conditions, volume adjustment
may be needed every time when the channel
is changed. This feature allows users to enjoy
stable volume levels by making automatic
adjustments for each program

• SPDIF: toggle digital sound via coaxial

cable off, select PCM option or set to Auto.

Channel setting

Channel

Channel Management
Favorite Management
Country
TV connection
Auto Search
DTV Manual Search
ATV Manual Search

Move

ENTER: Enter

• Channel Management: enter the channel

editing menu. RED, GREEN, YELLOW and
BLUE buttons are used as shortcuts. Select
the channel you want to edit with the UP/
DOWN buttons and then press:

RED button to delete the channel.
GREEN button to lock/unlock the channel.
YELLOW button to skip the channel when

browsing with CH+/- buttons.

BLUE button to select the two channels to

be swapped places.

• Favorite Management: enter the favorite

channel editing menu. RED, GREEN, YELLOW
and BLUE buttons are used to mark channels
as “Fav1, Fav2, Fav3 and Fav4, respectively.

• Country: use UP/DOWN buttons to select

your country.

• Auto Search: select this option to

automatically scan for available channels.

ALL: select this option to search for all

available digital and analogue channels. You

MENU: ReturnEXIT: Exit

can skip directly to digital scanning or stop the
search altogether by pressing EXIT/MENU.

DTV: Search for digital channels only.
ATV: Search for analogue channels only.

• DTV Manual Search: select this option to

scan for available digital channels manually.

First select channel number by pressing
ENTER/RIGHT or input the number directly.
The strength and quality of the signal will be
displayed at the bottom. Select “Start” and
press ENTER to start the current channel
search.

• ATV Manual Search: select this option

to scan for available analogue channels
manually.

First select channel number by pressing
ENTER/RIGHT or input the number directly.
Select “Search” and press ENTER to start the
current channel search. You can also fine tune
the channel frequency for a better reception.

Feature setting

Feature

Lock
Language
Clock
Sleep Timer
Auto Power Off
Hearing Impaired
CI Info
PVR/Timeshift

Move

ENTER: Enter

• Lock

Lock Channel: On/Off. A password is
required to view channels that are locked.

Parental Lock: Off/4-18. Toggle the parental
lock and set the age level permission for
certain programmes.

Change PIN Code: Press ENTER/RIGHT
to set a New Password then enter a 4-digit
number you want to set twice.

• Language: Select a System Language

which includes OSD Language, Preferred
Subtitle, Preferred Audio, Digital Teletext

MENU: ReturnEXIT: Exit

10

10

Operation

Language, Analog Teletext Language.

• Clock: set the current system time and set

the time zone and DST (daylight saving time).

• Sleep Timer: select the period (10-240

min) after which the TV will automatically
power off.

• Auto Power Off: select the period after

which the TV will automatically power off.

• Hearing impaired: This function allows

the use of close captions for people with
hearing impairements (where available).

• CI Info: select this option to enter the

common interface submenu. Only available
when a CI card inserted in the PCMCIA slot in
DTV mode.

• PVR/Timeshift: enter the PVR submenu

to setup digital channel recording. More info
is listed in the PVR/Timeshift section of this
manual.

Setup menu

Setup

OSD Timer
PC Setup
Blue Screen
Home Mode
Reset TV Setting
Software Upgrade

Move

ENTER: Enter

• OSD Timer: 5s/10s/15s/20s/25s/30s/

Never. Select the period after which the
elements of OSD menu disappear.

• PC Setup
Available only when PC is selected as a

signal source.

Auto Adjust: adjust all the parameters

automatically.

H Position: manually adjust the horizontal

position.

V Position: manually adjust the vertical

position.

Phase: remove horizontal interference.
Clock: remove vertical interference.

MENU: ReturnEXIT: Exit

• Blue Screen: set on or off blue screen

activation when there is no TV signal in ATV
mode.

• Home Mode: choose between Home or

Store modes of operations.

• Reset TV Setting: reset the parameters to

initial factory settings. May require a password
and user confirmation.

• Software upgrade: this option is intended

for using by qualified technicians only.

USB operation

General playback information

• Insert a USB into the USB jack. Select
Media source and press ENTER button. The
screen will show a USB playback window,
in which you can select Music, Photo, Movie
and eBook contents to play by pressing LEFT/
RIGHT cursor buttons and ENTER button.

• USB file systems supported: FAT, FAT32.

2.0 USB version is supported; maximum
capacity 320 GB. For correct and satisfactory
operation, licensed USB devices of famous
brands should be used with this unit. Avoid using
USB devices of unknown brands. Playback of
some file formates cannot be supported.

• This unit supports playback of video files
with ASF, AVI, MKV, MPG extension, with
video codecs WMV9, DIVX, H263, MPEG-4,
MPEGII, XVID and audio codecs WMA, MP3,
DD(AC3).

The above list of extensions and codecs
is for information only and is not a guarantee
that all files having the above extensions and
codecs should be read by this unit.

• Some AVI files cannot be played due to
their parameters and recording conditions.
Video files more than 2 GB having AVI
extension can be played partially.

According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for

Operation

11

11