Telefunken TF-LED32S13T2 User manual

LED TV/
Телевизор цветного
изображения c
жидкокристаллическим
экраном

Table of contents

TF-LED32S13T2

Instruction manual

Руководство по
эксплуатации

3

Table of contents

Table of contents

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

Table of contents
Before you start

Utilization of the product
Important safeguards
Installation

Base installation
Wall mounting

Connection

Outdoor antenna connection
Other connections

Operation

Control elements

Front panel

Back panel
Remote controller

Changing the battery

General operations

Signal sources

Teletext operations

OSD operation

Picture
Sound
Time

Channel
Option
Lock

Personal Video Recording (PVR)
Electronig Program Guide (EPG)/TimeShift
CI Information
USB operation

General playback information

Operations of file playback

General information

Troubleshooting

Causes of interference

Accessories
Specifications

2
3
3
3
4
4
5
5
5
5
6
6
6
6
7
8
8
8
8
9
9

9
10
10
10
11
11
12
12
12
12
13
14
14
14
14
15

2

Before you start

Utilization of the product

If you want to dispose of this product, do not mix it with general household waste. There
is a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.

Before you start

Important safeguards

• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.

• This unit can be connected to a power
supply outlet without the third ground contact
as well as with a ground contact.

• Always disconnect the power cord and
antenna during a thunderstorm.

• Do not fix the power cord with a metal nail.

• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.

• When unplugging the plug, always hold the
wide slot, do not touch the metal part, and do
not destroy, twist, pull or heat the power cord.

• Please contact the service center
immediately if you found that the cable core is
bare or has been broken.

• Please replace the AC outlet if the metal
plug cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires could happen.

• Never touch the antenna or power plug

during a thunderstorm.

• Do not touch the power plug with wet

hands.

• Do not use any non-rated power socket
with numerous devices plugged into it. The
wire of non-designated capacity may cause fire
due to heat generation.

• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.

• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.

• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.

• Excessive pressure on the panel may
damage the unit.

• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as damage to the product.

• Please place the product on a flat surface
in a well-ventilated location. Keep it away
from open fire, direct sunlight, vibration, high
temperature and humidity.

• Do not place any vases, potted plants,
cups, medicines or any other liquid containing
objects on the unit. Spillages may cause fire,
electric shock or breakdown.

3

Before you start

Before you start

• Do not install the unit in locations with
a strong magnetic or current field as it may
cause malfunction. Picture deterioration due to
electromagnetic radiation in this environment is
also possible.

• Do not place any fire source such as
candles close or on this product. If tipped over
or fallen down, it may cause damage or fire.

• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left, and right of the TV.

• Please place all the signal cords behind
the rear panel.

• Do not overexert or touch the panel when
carrying the product. Do not transport the LED
TV with the display faced up or down.

• Do not transport the unit with the power
cord or the connection cable connected as it
may damage the power cord, connection cable
or connection terminal which may cause fire,
electric shock or breakdown.

• Make sure that 2 persons or more carry
the device heavier than 18 kg. Dropping or
tipping over the device may damage it.

• The temperature of the product’s body
becomes a little higher after a long period
of use. This indicates that heat exchange
is in normal working mode, thus please do
not let children or anyone who is sensitive to
temperature touch the unit.

All images provided herein are schematic
drawings of real objects and may differ
from their real life images.

Wall or ceiling mounting implements
must be durable and sufficient enough to
support the weight of the unit.

Installation

Base instalation:

Place the LED TV on a solid flat surface.
Use soft material to place over the front screen
to avoid any damage.

Align the base with the hole in the lower part
of the TV cabinet and fix the assembly with one
4x16 screw.

Wall mounting

For wall mounting the back panel of this
unit is equipped with 4 screw holes (spread
distance 100*100 mm). A VESA wall-mount
bracket should be used for wall mounting (the
bracket is not included and should be acquired
separately).

Due to construction peculiarities, it is not
recommended to mount TVs on walls using
swinging and tilting brackets. Such a mounting
may not be steady.

Manufacturer is not responsible for improper
mounting resulting in damage of the unit.

4

4

Connection

Installation

Installation

Antenna cable connector

75 Ohm co-axis cable

Outdoor Antenna Connection

Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the unit casing.

Other connections

• Connect audio and video sources
(Including DVD, VCDR, CAMCORDER and
PC) to the AV input using the included AV
cable.

• Plug the power cable in the electric outlet,
making sure the current voltage is supported.

• When using the LED as a computer
screen, connect the PC to the VGA jack from
the monitor using the VGA cable (not included).

• This unit has PC audio in jack. Connect
this jack to PC main unit with related audio
cable in PC mode and adjust the volume to
what you want.

TVRF antenna jack

• If the video source has a HDMI output
jack, you can connect the signal to the TV by
the HDMI cable (not included). Use the HDMI­1(MHL) input to connect your smartphone via
a special cable to see the digital content on the
TV screen. Support of all devices with the MHL
function is not guaranteed.

• S/PDIF coaxial output is intended for
transmitting multi-channel digital sound to
an external decoder (e.g. in 5.1-CH format).
Coaxial cable should be used for connection
(not included).

• Connect your headphones or earphones
(not included) to the headphone socket of
this unit. When earphones are connected, the
sound output through the built-in speakers of
this unit is mute.

• PCMCIA slot is used for CI modules that
are obtained from your digital TV provider.

5

5

Operation

Operation

Control elements

Front panel

Back panel

Front panel

1. Power indicator/Remote sensor

2. Speakers

3. PROGRAM UP/DOWN buttons

4. VOLUME UP/DOWN buttons

5. MENU button

6. SOURCE button

7. STANDBY button

Back panel

1. S/PDIF output

2. USB1/2 ports

3. HDMI1/2/3 inputs

4. PC (VGA) input

5. PC audio input

6. Antenna input

7. AV input

8. PCMCIA slot

9. Headphone output

6

6

Operation

Remote controller (RC)

1. STANDBY(POWER): Standby turn on and
off.

2. MUTE: Mute the sound.

3. PICTURE: Select the picture mode.

4. SOUND: Select the sound mode.

5. ZOOM: Zoom in or out the current
picture.(Some pictures or videos may not
be operated.)

6. Number buttons: Press these keys to select
a channel.

7. CHN.LIST: Access the channel list.

8. RETURN: Return to a previous channel.

9. MENU: Enter or exit the TV menu.

10. SOURCE: Select the signal source.

11. Cursor buttons: UP/DOWN/LEFT/RIGHT.

12. ENTER: Press to confirm and execute a
selection.

13. TV/RADIO: Switch between TV and radio.

14. EXIT: Exit any menu or operation.

15. HOME: Access the home screen.

16. VOLUME UP/DOWN: Adjust the sound
volume.

17. PROGRAM UP/DOWN: Select the next/
previous channel.

18. SLEEP: Select the period after which the
TV switches to standby.

19. EPG: Display the Electronic Program Guide
(EPG) in DTV mode.

20. SUBTITLE: Show or hide the subtitles.

21. FAV.: View assigned favorite channels,
press UP/DOWN to select, ENTER to confirm.

22. REC (

23. INFO: Display information on the current
source.

24. USB playback control buttons/Teletext
buttons:
PLAY/PAUSE ( ): Press to pause playback,
press again to resume.
STOP ( ): Stop the playback and return to
filelist.
FAST BACKWARD/FAST FORWARD ( / ):
Fast reverse/fast forward the playing file.
PREVIOUS/NEXT ( / ): Play the previous/
next file.
For Teletext operations refer to “Telext
operations” section below

25. Color buttons: Access red, blue, green and
yellow items in menus

26. NICAM: Select the sound output (Mono,
Stereo, SAP) depending on the broadcasting
channel.

27. FREEZE/HOLD: Freeze/unfreeze the
current picture.

28. PVR LIST: DIsplay the recorded files list.

29. QUICK: List some common settings for
quick change.

30. 3D: Not available.

31. AD: AD (Audio Description) is a spoken
narrative of what is happening on the screen.

): Record the current program.

7

Operation

7

Operation

Operation

Changing the battery

1. Remove the battery compartment cover

on the back of the RC.

2. Insert two AAA batteries into the battery
compartment making sure that the correct
polarity is observed.

3. Put the cover back.

• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.

• Take the battery out of the RC if it is not
used for a long time.

• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

General operations

• Press POWER button on the unit or on
the RC to switch on the power, the indication
on the unit will light up. Press POWER button
again to switch off the power, and the light will
be in red color.

• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.

• Press RETURN button on the RC to select
from the present channel and the previously
displayed channel.

• Press MUTE button to cut off sound, press
this button again or adjust volume to resume
sound.

• Press PR-/PR+ buttons to select previous
or next channels; or press number buttons to
enter a channel number directly.

• Press PICTURE button repeatedly to cycle
through available video picture modes.

• Press SOUND button repeatedly to cycle
through available sound modes.

• Press NICAM button in TV mode
repeatedly to switch between Stereo, Mono,
SAP sound modes (can be unavailable for
some channels).

• Press FREEZE button to freeze the picture

on or off.

• Press FAV. button to show the favourite
channel list. Press UP/DOWN to select next
or previous favorite channel. Press ENTER to
confirm.

Signal sources

Press SOURCE button, then press DOWN/
UP cursor buttons on the RC or PR UP/PR
DOWN buttons on the panel to select a source
from available source list: DVBT - DVBC - ATV

- AV - PC - HDMI - USB. Press ENTER button
on the RC or FUNCTION button on the panel to
confirm.

TELETEXT operations (option)

• Select the TV source mode. Then press
PR-/PR+ buttons to select TV channel in order
to pick up the picture signal of Teletext.

• Press PR-/PR+ buttons to select the
previous page or the next page.

• Teletext button functions are as follows:

HOLD: Press this button to stop the move
to the next page. Press this button again to
cancel operation.

INDEX: Press this button to go to the index
page.

CANCEL: Press this button to cancel the
teletext; press again to show the teletext.

REVEAL: Press this button to reveal the
concealed information. Press this button again
to conceal the information.

SUBPAGE: Press this button to select sub
page, then press Red/Green buttons to select
the desired subpage.

MIX: Press this button to mix the teletext
and current TV signal image (transparent
background).

RED/GREEN/YELLOW/BLUE buttons:
Press these 4 color buttons to access directly
to corresponding color page displayed at the
lower parts of teletext screen.

8

8

Operation

OSD operation

1. Press MENU button to enter the main

menu.

2. Press LEFT/RIGHT cursor buttons on the
RC or VOL UP/DOWN buttons on the panel to
select a specific menu.

3. Press UP/DOWN cursor buttons or PR
UP/DOWN buttons on the panel to select a
specific item.

4. Press ENTER button on the RC or
SOURCE on the panel to enter the selected
item.

5. Press cursor buttons on the RC or VOL
UP/DOWN or PR UP/DOWN buttons on the
panel to adjust the selected parameter.

6. Press MENU/EXIT to quit the menu.

Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.

Picture

Picture Mode
Color Temperature
Aspect Ratio
Noise Reduction
MPEG Noise Reduction
Dynamic Contrast
Film Mode
PC Setup

Cool.

• Aspect Ratio: 4:3/16:9/Subtitle/Movie/

Panorama/Auto.

• Noise Reduction: select between four

modes of digital noise reduction available: Off/
Low/Middle/High.

• MPEG Noise Reduction: eliminate digital

picture decoding noises: Off/Low/Middle/High

• Dynamic Contrast: Switch this option on

to automatically adjust the screen contrast.

• Film Mode: Stretches the picture at the

edges while maintaining a proper aspect ratio.

• PC Setup: Adjust the screen settings

when the TV is connected to a PC:

- Auto Adjust: adjust the screen size and

position.

- H-Position: adjust the horizontal position.

- V-Position: adjust the vertical position.

- Frequency: adjust the image frequency.

- Phase: adjust the image phase.

Sound

Sound Mode
Balance
Auto Volume
Surround Sound
AD Switch
SPDIF Mode

Operation

PICTURE

• Picture Mode: Nature/Movie/Sports/User.

• Contrast

• Brightness

• Color

• Sharpness

• Tint: adjust the tone of color when your

system is in NTSC.

• Color Temperature: Nature/User/Warm/

SOUND

• Sound Mode: Standard/Music/Movie/

Sports/User.

• Balance: adjust balance between left and

right speakers.

• Auto Volume: set the auto volume

correction on/off. It will level out the sound
volume when sudden changes in volume occur
during commercial breaks or channel change.

• Surround Sound: set the surround sound

effect on or off.

9

9

Operation

Operation

• AD Switch (in DTV mode): This is an

auxiliary audio function that provides an
additional audio track for visually challenged
persons. This function handles the Audio
Stream for the AD (Audio Description), when
it is sent along with the Main audio from
the broadcaster. Users can turn the Audio
Description On or Off and control the volume.

• SPDIF Mode: toggle digital sound via

coaxial cable on/off.

Time

Auto Sync
Clock
Sleep Timer
Auto Sleep
Time Zone
Summer Time

TIME

• Auto Sync: On/Off. Synchronize TV time

with the system when receiving DTV signal.

• Clock: Set the time and date. Only

available when Auto Sync is set to Off.

• Sleep Timer: Set the auto off timer to

Off/10/20/30/60/90/120/180 or 240 minutes.

• Auto Sleep: Set the auto off timer when

no operations are performed to off/4 hours/6
hours/8 hours.

• Time Zone: Select the desired time zone.

• Summer Time: Toggle the automatic

Summer/Winter time switching on and off.

Channel

Auto Search
DTV Manual Tuning
ATV Manual Tuning
5V Antenna Power
Program Edit
Signal Information
CI Information

CHANNEL

• Auto Search: press ENTER and cursor

buttons to select the country and source type
for channels to start automatic search and
saving of available DVB-T, DVB-C and ATV
channels. You can pause the search at any
time by pressing the MENU or EXIT button.

• DTV Manual Tuning: Press SOURCE

to select either DVB-T or DVB-C mode.
Press LEFT/RIGHT cursor buttons to select
channel number or input the frequency using
the number buttons. Press ENTER to start
searching. When the nearest available channel
is found, the search will stop and the channel
will be saved under the selected number. Press
MENU button to quit.

• ATV Manual Tuning:
Storage To: select channel number.
Sound System: select corresponding sound

system.

Search: press LEFT/RIGHT buttons; the
unit will search for next available channel
downward or upward and save it under the
current number.

Fine Tuning: perform fine adjustment of the
current frequency.

• Program Edit: this item allows you to sort

TV programs according to your preferences.
Follow the instruction on screen to use color
buttons on the RC to skip, rename and delete
programs, and add them to favorites by
pressing FAV.

• Signal Information: View the information

10

10

Operation

on the current DTV channel.

• CI Information: This function enables

you to watch some encrypted services (pay
services). Please insert a CI card into the
PCMCIA slot according to the arrow on the CI
card.

Option

OSD Language
Audio Language
Subtitle Language
PVR File System
Sticker Demo
Restore Factory Default
Link
Color Range
Software Update (USB)

OPTION

• OSD Language: select the language of

the OSD menu.

• Audio Language: select the language of

some DTV programs.

• Subtitle Language: select the language of

subtitles in DTV mode.

• PVR File System: Personal Video Record

setting. A USB storage device is required to
enable program recording.

• Sticker Demo: Show the fuctional demo.

• Restore Factory Default: Revert settings

to default factory values.

• Link: Toggle the HDMI-CEC function and

view information on paired devices.

• Color Range: Select the color range in

HDMI mode: 0-255/16-235/Auto.

• Software Update (USB): Upgrade the

TV’s software using a USB storage device.

Lock

Lock System
Set Password
Block Program
Parental Guidance
Panel Lock

LOCK

• Lock System: The feature can prevent

unauthorized operation of the TV set unless
entering a 4-digit password. When Lock
System is on and the system is locked,
you must input the system password when
changing certain parameters. Press the right
number buttons for the password. The default
password is 0000.

After a password correction has been
confirmed, please remember it for entering into
the Parental Guidance menu, all functions can
not be activated until the correct password is
entered.

• Set Password: Set the system password.

• Block Program: Block/unblock the

desired programs.

• Parental Guidance: Set the restriction

level of parental control.

• Panel Lock: Lock/unlock the panel

buttons.

Personal Video Recording (PVR)

Insert a USB, the system will automatically
create a folder to store the files recorded.
Recording begins when REC button is pressed,
and it records all the time until STOP button is
pressed or the memory is full. Press EXIT to
quit recording mode. Press PVR.LIST to show
the list of recorded files. Using the OSD menu
you can also pause, stop, fast reverse and fast

Operation

11

11