Telefunken TF-LED24S12T2 User manual

TF-LED24S12T2

Table of contents

2

Table of contents

Table of contents
Before you start

Utilization of the product
Important safeguards
Installation

Wall mounting
Stand installation

Connection

Connection

Outdoor antenna connection
Other connections

Operation

Control elements
Remote controller

Changing the battery

General operations

Teletext operations

OSD operation

USB operation

General information
File playback

CI information

General information

Troubleshooting

Causes of interference
Accessories
Specifications

Dear customer!

Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.

2
3
3
3
4
4
4
5
5
5
5
6
6
7
7
8
8
9

9
10
10
11
11
12
13
13
13
13
15
15
15
16
16

Channel setting
Picture setting
Sound setting
Screen setting
Timer setting
Lock setting

Before you start

3

Before you start

If you want to dispose of this product, do not mix it with general household waste. There
is a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.

Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.

Utilization of the product

Important safeguards

• Before plugging the power cord make sure
that the voltage designation of the LED TV
corresponds to the local electrical supply.

• Please unplug the power cord from the AC
outlet and contact a service center for repair if
the following occurs: any obvious abnormality
appears in the unit, such as smoke, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.

• This unit can be connected to a power
supply outlet without the third ground contact
as well as with a ground contact.

• Always disconnect the power cord and
antenna during a storm.

• Do not fix the power cord with a metal nail.

• When connecting or disconnecting cables
to or from TV terminals, make sure the power
is switched off.

• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.

• When pulling the plug, always hold the
wide slot, do not touch the metal part, and do
not destroy, refit, twist, pull or burn the power
cord.

• Please contact the service center
immediately if you found that the cable core is
bare or has been broken.

• Please replace the AC outlet if the metal
bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.

• Never touch the antenna lie or power plug
if it stars to thunder.

• Do not touch the power plug with wet
hands.

• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of non­designated capacity may cause the fire due to
the generation of heat.

• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.

• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.

• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.

• Over-pressing the panel may destroy the
product.

• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.

• Please place the product on a flat surface
in a well-ventilated location. Keep it away from

Before you start

Before you start

the burning-light, direct sunlight, vibration,

high-temperature and humidity.

• Do not place any vase, potted plant, cup,
medicine and any container with water on this
product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.

• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.

• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.

• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.

• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left and right of the TV.

• Please place all the signal cords behind of
rear panel.

• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LED TV up or down display direction.

•

Do not transport it with any cables
connected. If you move this product with
cables connected, the damaged cables or
connection terminals may cause fire, electric
shock or breakdown.

• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it may damage it.

• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.

• Please allow at least a 5 hour wait at room
temperature before switching on the power
after transpoting or storing the TV at below
zero temperatures.

Installation

Wall mounting

For wall mounting the back panel of this unit
is equipped with a VESA slot. A 100*100 mm
VESA wall-mount bracket should be used for
wall mounting. The wall-mounting bracket is not
included and should be acquired separately.
Manufacturer is not responsible for improper
mounting resulting in a damage to the unit.

Stand installation

Cover a flat stable surface with a soft cloth.
Place the TV unit facedown on the cloth. Insert
double support legs and fix them with 4
ST4X14 mm screws as shown below.

Wall or ceiling mounting implements
must be durable and sufficient enough
to support the weight of the unit.

All images provided herein are schematic

drawings and may differ from of real objects.

4

4

Connection

Connection

Connection

Antenna cable connector

75 Ohm co-axis cable

Outdoor antenna connection

Use 75Ω cable plug or 300-75Ω impedance
converter to plug in antenna input terminal on
the rear of the cabinet.

Other connections

• Connect the audio sources (Including
DVD, VCDR, CAMCORDER and PC) to
the Mini AV in (Mini YPbPr)

• Connect the video source to the AV
IN jack by RCA cable.

• Component input is intended to receive
component video signal from the external
device. Connection is made with the help of a
special component cable. To receive audio
signal for component vide
audio input of this unit.

• Plug the power cable in the electric outlet,
making sure the current voltage is supported.

o, please use the

TVRF antenna jack

• When using the LED as a computer
screen, connect the PC to the VGA jack from
the monitor by the relevant cable (not included).

• If the video source has a HDMI output
jack, you can connect the signal to the
monitor by the HDMI cable (not included).

• Coaxial SPDIF output is intended for
transmitting multi-channel sound to an external
decoder (e.g. in 5.1-CH format). Coaxial cable
should be used for connection.

• PCMCIA slot is used for CI modules that
are obtained from your digital TV provider.

•

SCART socket is used to connect external
devices with a SCART connection.

5

5

Operation

Operation

Control elements

1

1. IR sensor/power indicator

2. Button panel:

POWER button

Full HD

SOURCE button

MENU button
CH + button
CH - button
VOL + button
VOL - button

Earphone output

3.

VGA input

4.

PC audio input

5.

SCART socket

6.

TVRF antenna input

2

7.

8.

SPDIF coaxial output

HDMI input

9.

10. Mini YPbPr input

CI (PCMCIA) slot

11.

Mini AV input

12.

13. USB port

13

USB

5V 0.5A

12
11

CI+

10

MINI YPbPr MINI AV

9

HDMI

8

COAX

EARPHONE

3 4

PC AUDIO SCART RF INVGA

5

6

7

6

6

MEDIA:

LAN G:Pre ss to sho w the lan guage i n DTV mod e.

TIME SHIFT: 1.DTV channel time shift Function.

2.play on PVR or Media Player mode.

R.LIST: Show the recorded list.

Operation

8

8

Operation

• Use two AAA batteries for the RC. The RC
should be pointed at remote sensor within 8
meters and within 30 degrees at the left or the
right side.

• Take the battery out of the RC if it is not
used for a long time.

• Do not mix new and used batteries or
different types of batteries. Weak batteries can
leak and severely damage the RC.

• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.

CAUTION!
Incorrect installation of the batteries may

lead to an explosion.

Please replace used batteries with the

batteries of the same or comparable type.

General operations

•

Connect the plug of the power cord
to the power supply outlet, the power indicator
will light showing that the unit is in standby
mode. To switch on the unit, press POWER
button on the panel or on the RC; when the TV
is on, the power indicator is off. Press POWER
button again to switch the unit to the standby
mode, the power indicator will light up. To
switch off the unit completely, disconnect the
power cord plug from the power supply outlet.

• Press VOL- button on the unit or on
the RC repeatedly to decrease the volume;
press VOL+ button on the unit or on the RC
repeatedly to increase the volume.

• Press MUTE button to mute sound, press
this button again or adjust volume to resume
sound.

In TV mode press CH+/CH- buttons

•
to select previous or next channel; or press
number buttons to enter a channel number
directly.

• Press INFO button to display the preset
TV channel information.

•

Press SOURCE button, then press cursor
buttons on the RC to select a source from
available source list: DTV => ATV => AV =>

SCART => YPbPr => PC => HDMI =>
USB.

TELETEXT operations (option)

• Select the TV source mode. Then press
CH-/CH+ buttons to select TV channel in order
to pick up the picture signal of Teletext.

• Teletext button functions are as follows:

TEXT: Press this button to enter into Teletext
mode. Follow the guides on screen and use
the color buttons to navigate the Teletext.

Red/Green/Yellow/Blue buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower parts of teletext screen.

Operation

9

9

Operation

OSD operation

1. Press MENU button to enter the setting

menu displayed on the screen.

2. Press LEFT/RIGHT cursor buttons on the

RC to select setting page.

3. Press OK button on the RC to go to the

parameter list.

4. Press UP/DOWN cursor buttons on the

RC to select a parameter to adjust.

5. Press LEFT/RIGHT cursor buttons on the

RC to adjust the selected parameter.

6. Press MENU button to return to the
previous menu page. Press EXIT button on the
RC to quit the menu.

Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.

Channel setting

CHANNEL

Auto Tuning
DTV Manual Tuning
ATV Manual Tuning

Programme Edit
Schedule List

Signal Information
CI Information

Select
Press “OK” to select
Press “MENU” to return

• Auto Tuning: press OK buttons to select
the country and tune type for channels to start
automatic search and saving of available ATV
channels. After the search is finished, the unit
will skip to searching DTV channels, Radio
channels and Data. During the ATV search,
press MENU button to skip to DTV, Radio and
Data search.

• DTV Manual Tuning: Press LEFT/RIGHT

cursor buttons to select channel number. Press
OK button to start searching. If the selected
channel number is available, the channel will
be saved under the selected number. Press
MENU button to quit.

• ATV Manual Tuning:

Current CH: select channel number.
Color System: select corresponding color

system.

Sound System: select corresponding sound

system.

Fine-Tune: perform fine adjustment of the

current frequency.

Search: press LEFT/RIGHT buttons; the
unit will search for next available channel
downward or upward and save it under the
current number.

• Programme Edit: this item allows
you to sort TV programs according to your
preferences. Enter the program edit menu:

Delete: Select the channel you want to delete.

Press red button to delete the channel.

Move (not available for DTV channels with
LCN): Highlight the needed channel. Press
yellow button; select the position to put the
channel into. Press yellow button to confirm.

Skip: Highlight the needed channel. Press
blue button; now this channel will be skipped
when you select previous/next channels.

• Signal Information: View the information

on the current signal.

• CI Information (only in DTV mode): This
function enables you to watch some encrypted
services (pay services). Please insert a CI card
into the PCMCIA slot according to the arrow on
the CI card.

• The function can only be gotten when

CI slot is available.

• It is possible for you to change CI
(Common Interface) menu screen and service
by consulting your dealer.

• Please do not insert or pull out the CI card
when power on. During initialization of the CI

Operation

10

10

Operation

card, please don’t operate the TV.

• Do not insert or pull out the CI card
frequently so as to avoid any damages of the
TV and the CI card.

Picture setting

PICTURE

Picture Mode

Colour Temp

Noise Reduction

HDMI Mode

Select
Press “OK” to select
Press “MENU” to return

•

Picture Mode: Dynamic/Standard/Mild/

Personal. When Personal mode is selected,
you can adjust contrast, brightness, colour,
tint and sharpness of the image.

•

Color Temperature: Cold/Normal/

Warm.

• Noise Reduction: Dynamic noise
reduction effect for reducing the video noise
level. Select the Off/Low/Middle/High/Default
mode.

Sound setting

SOUND

Sound Mode
Balance
Auto Volume Level
SPDIF Mode

AD Switch

Select
Press “OK” to select
Press “MENU” to return

• Sound mode: Standard/Music/Movie/
Sports/Personal. When Personal mode is
selected, you can adjust bass and treble.

•

Balance: select the proportion between the

left and right speakers.

•

Auto Volume Level: reduce the difference

between channel and program volume
automatically.

• SPDIF Mode: Select the digital audio
output mode: Off/PCM/Auto.

• AD Switch (in DTV mode): This is an
auxiliary audio function that provides an
additional audio track for visually challenged
persons. This function handles the Audio
Stream for the AD (Audio Description), when
it is sent along with the Main audio from
the broadcaster. Users can turn the Audio
Description On or Off and control the volume.

Operation

11

11

Operation

Timer setting

TIME

Clock
Off Time
On Time
Time Zone

Sleep Timer

Auto Standby

OSD Timer

Select
Press “OK” to select
Press “MENU” to return

• Clock: You can display either the DTV

signal stream time or set the system time.

• Off Time: set the time for the TV to switch

off.

• On Time: set the time, channel and
volume for the TV to switch on. The TV must
be in standby for the On-timer to work.

• Time Zone: select your time zone.

• Sleep Timer: select the period until

automatic switch-off of the unit.

Setup setting

SETUP
Language
TT Language
Audio Languages
Subtitle Language
Hearing Impaired
PVR File System
Aspect Ratio
Restore User Default
Blue Screen
First Time Installation
Reset
Software Update (USB)
HDMI (CEC)

Select
Press “OK” to select
Press “MENU” to return

•

Language: select the language of

the on-screen display (OSD) menu.

• Audio Language: select audio language

(available for some DTV channels).

• Hearing Impared: When Hearing Impaired
is on, the screen will give some information to
people whose hearing is impaired. When Off,
the information will be hidden.

• PVR File System (in DTV mode):

Select Disc: select the storage used for PVR.
Time Shift Size: select the time for Time

Shift.

Format: format the USB.
Speed Check: display the speed of the

storage.

• Software update (USB): Update TV
software using a USB storage device.

•

Reset: reset the

parameters to initial factory settings.

Screen setting (only in PC mode)

SCREEN

Auto Adjust
H-Offset
V-Offset
Size
Phase

Position Reset

Select
Press “OK” to select
Press “MENU” to return

• PC Setting (only in PC mode):
Auto adjust: automatical setting of the

parameters.

Horizontal Offset: adjust horizontal position of

the image.

Vertical Offset: adjust vertical position of

the image.

Size

: adjust the image frequency manually.

: adjust the phase manually.

Phase

Position Reset: reset the screen adjustment

Operation

12

12

Operation

Tuning, Manual Tuning, Programme Edit or
Default. Press the right number buttons for the
password. The default password is 0000.

confirmed, please remember it for entering
into the Parent Guide menu, all functions can
not be activated until the correct password is
entered.

password. Press the number buttons on the
remote control to set the new password. When
the new password has been put in twice, the
setting is finished successfully. The TV will go
back to previous menu.

Green button to lock the available channel you
want. Press Green button again to unlock it.

Lock setting

LOCK

System Lock

Set Password

Channel Lock

Select
Press “OK” to select
Press “MENU” to return

•

System lock: The feature can prevent

unauthorized operation of the TV set unless
entering a 4-digit password. When Lock
System is on and the system is locked, you
must input the system password at Auto

After a password correction has been

• Set password: You can set your private

•

Channel Lock (in TV/DTV mode): Press

Operation

13

13

Operation

USB operation

General information

• This unit supports playback of video files

The above list of extensions and codecs
is for information only and is not a guarantee
that all files having the above extensions and
codecs should be read by this unit.

• Some AVI files cannot be played due to
their parameters and recording conditions.
Video files with AVI extension exceeding 2 GB
in size may be played partially.

According to the USB 1.1/2.0 Standard,
usage of a USB device with power current
consumption exceeding 500 mA is not
recommended without supplementary power
supply. Failure to use supplementary power for
connected USB drives with power consumption
exceeding this value as well as defective
USB drives may cause mechanical or thermal
changes of elements of this unit as well as
failure of internal elements of the USB port.
Such damages are not warrantee cases.

Warning: usage of external USB drives
containing BIN files in the root directory may
cause malfunction of the unit or damage to the
software.

File playback

•

•

•
press OK button. Press cursor buttons to select
a file and press OK button to start playback.
During playback press MENU button to show
playback menu in which you can select an

CI Information

(only in DTV mode): This function enables
you to watch some encrypted services (pay
services). Please insert a CI card into the

USB file systems supported: FAT32. 2.0
USB version is supported. Maximum capacity
1 TB. For correct and satisfactory operation,
licensed USB devices of well-known brands
should be used with this unit. Avoid using USB
devices of unknown brands. Playback of
photos and music of only JPEG and MP3
format is supported. The output capability of
the USB port is 500 mA.

with AVI, TS, MP4, MKV, MOV extension,
with video codecs H264/AVC, H263,
MPEG1/2/4 and audio codecs PCM,
MP3, AAC.

Insert a USB into the USB jack. Press
SOURCE button, select Media option and
press OK button. The screen will show USB
playback menu.

USB

Photo
Music

Movie

Text

Video file playback: Select Movie item
and press OK button. Press cursor buttons
to select a file and press OK button to start
playback. During playback press MENU but­ton to show playback menu in which you can
select an operation by LEFT/RIGHT cursor
buttons and perform this operation by press­ing OK button. The operations include Play/

Pause,FB,FF,Prev.,Next,Stop,Charset,Repeat
Mode,AB Repeat setting,Playlist,Info.,Slow
Forward,Step Forward, Goto Time,Zoom
In,Zoom Out,Aspect Ratio,Move View. To exit

video playback press EXIT button.

Photo file playback: Select Photo item
and press OK button. Press cursor buttons
to select a file and press OK button to start
playback. During playback press MENU button
to show playback menu in which you can select
an operation by LEFT/RIGHT cursor buttons
and perform this operation by pressing OK
button. The operations include: Play/

Pause,Prev.,Next,Stop,RepeatMode
Music，Playlist，Info.,Rotate(Clockwise),Rotate
(Counterclockwise),Zoom In,Zoom Out,Move
View. To exit photo playback press EXIT button.

Music file playback: Select Music item and

operation by LEFT/RIGHT cursor buttons and
perform this operation by pressing OK button.
The operations include Play/Pause,FB,
FF, Prev., Next, Stop, Repeat Mode, Mute,
Playlist, Info. and Goto Time. To exit music
playback press EXIT button.