Telefunken RUBY SERIE User Guide

DIGITAL PHOTO FRAME OPERATING INSTRUCTIONS

TELEFUNKEN RUBY SERIE

(DPF 7322, DPF 9322)

I. Learn about and install your frame.......................................................................2

1. Box contents ...........................................................................................................2

2. Frame diagrams.......................................................................................................2

3. Remote control........................................................................................................2

4. Installation ...............................................................................................................3

II. Use your frame ......................................................................................................3

ENGLISH

1. Selecting a language ...............................................................................................3

2. “ECO LOGIC™” mode.............................................................................................3

3. Reading a memory card or a USB key.....................................................................3

4. Copying photos to the internal memory ................................................................... 4

5. Deleting photos .......................................................................................................6

III. Selecting the type of files to play .........................................................................7

1. Internal memory/Removable medium.......................................................................7

2. Selecting a folder..................................................................................................... 7

IV. Settings.................................................................................................................. 7

1. Configuring photos ..................................................................................................7

2. System configuration ...............................................................................................9

V. Connecting to a computer ..................................................................................10

VI. Safety instructions...............................................................................................11

VII. Warranty............................................................................................................... 12

VIII. Specifications ...................................................................................................... 13

Non contractual document subject to change in case of typographical errors (Mktg0710) COPYRIGHT SOPEG 2010)

I. Learn about and install your frame

Thank you for your recent purchase of a TELEFUNKEN “RUBY Series” digital photo frame. Before using your device, please consult these operating instructions and keep them so you may refer to them later on.

1. Box contents

- 1 digital photo frame

- 1 AC adaptor

- 1 remote control

- 1 dust cloth

2. Frame diagrams

ENGLISH

3. Remote control

All functions can be accessed with the remote control. Press the following keys to access the functions:

Key Function

▲

◄

▼

►

ENTER

EXIT

STOP

(COPY/DEL)

(ROTATE)

Navigation up in the menus

Navigation left in the menus and skip to the previous file

Navigation down in the menus

Navigation right in the menus and skip to the next file

Confirm your selection or switch modes

Switch the digital photo frame on or to standby mode

Exit current menu and return to previous menu

Stop file playback and return to main menu

Access copy, delete and sort functions (only in main menu)

Rotate photo clockwise 90°

Enlarge image, press repeatedly to cycle through zoom modes x2, x4, x8 and x16; press again to return to normal size

Non contractual document subject to change in case of typographical errors (Mktg0710) COPYRIGHT SOPEG 2010)

ENGLISH

(SLIDESHOW)

SETUP

Start the photo slideshow directly

Access setup menu (Settings) directly

4. Installation

- Take your frame and its accessories out of their packaging.

- Remove the plastic film protecting the front of the frame.

- Pull the plastic tab protecting the contacts in the remote control.

- Stand the frame in the desired location, pulling the adjustable stand towards you (see diagram

above).

- Connect the electrical cord to the frame in the space provided.

- Plug your frame into an outlet. Your frame will start up automatically.

II. Use your frame

1. Selecting a language

During its first use, the frame will display an initial screen allowing you to choose the language.

- Select your language using the arrow keys on the remote control,

then press “Enter”.

Once you have selected your language, your frame will begin to read the photos contained in its internal memory.

2. “ECO LOGIC™” mode

ECO LOGIC™ mode combines 3 essential elements to reduce energy consumption by over 40% compared to a standard frame:

- A LED screen, which uses less energy while improving image quality

- A low-energy and “Energy Star”-certified power adapter

- A light sensor

This sensor, on by default, will automatically turn off your picture frame at night and turn it on during the day. You can deactivate the light sensor in your frame’s system settings menu.

3. Reading a memory card or a USB key

If your frame is off:

- Insert your card or USB key in the space provided.

- Switch on your frame: The slideshow will automatically

play the contents of your memory card or USB key.

Non contractual document subject to change in case of typographical errors (Mktg0710) COPYRIGHT SOPEG 2010)

If your frame is on and playing the slideshow from the internal memory:

- Your memory card is automatically detected

1. After a few seconds, a dialog box will appear: “Copy

files?” Select “Yes” and press “Enter”.

2. The thumbnails will appear, with a check box in the upper

left corner of each picture. Select photos to be copied using the “Left/Right” keys on the remote, pressing “Enter” for each photo you wish to select. The small square will then show a tick mark for each image you select. (If you choose “Copy all”, every thumbnail will show a tick mark.

3. Press the “Copy/Del” key, a confirmation message will

appear. Press “Enter” to confirm your selection, then select the directory you want to copy your pictures. Press “Enter”.

4. The screen will show a dialog box asking you if you want

to resize your images.

5. Select the desired option using the “Up/Down” keys on

the remote and confirm the choice by selecting “Confirm”. Press “Enter”. Your photos are now copied into the internal memory and sized to the frame’s resolution. If you choose “Yes”, to copy the images, a message will appear: “Do you want to resize them?” Resizing allows the copies to fit the resolution of your frame, considerably reducing their file size. Thanks to this system, you can store over 10,000 photos in the internal memory.

(IMPORTANT: Only the copies of your pictures will be resized. Your original photos on the card will not be modified.)

ENGLISH

4. Copying photos to the internal memory

If you did not select automatic copying when you inserted the card, you have 2 ways to copy images from your memory card to the frame’s internal memory.

- Copy your photos from the file manager

If you use this method, you can only copy files one at a time, and you will not be able to resize them to the frame’s resolution.

1. Press the “Exit” key on your remote as many times as

necessary for the mode selection screen to come up.

Non contractual document subject to change in case of typographical errors (Mktg0710) COPYRIGHT SOPEG 2010)

+ 9 hidden pages