Foxy R1 and Foxy R2
fraction collectors are
R1 & R2
Fraction Collectors
ideal for applications
including prep HPLC,
protein, and
purifications.
The basic model, Foxy R1,
uses a single collection
rack for a small footprint.
The Foxy R2 doubles the
collection capacity, and
uses Radio Frequency
Identification (RFID) for
error-free rack configuration.
peptide
Reliable and Easy to Use
1. Symbolic touch screen display for quick setup
Foxy R1
1
Foxy R2
2
3
4
5
teledyneisco.com
2. Diverter valve with contained flow path
3. 1,000 mL/min diverter valve available
4. Integral drop former virtually eliminates delay volume
5. Drip tray provides secondary containment for safety
6. Grounded for organic compatible collection
7. Robust, single piece cast aluminum frame creates a reliable collector
6
7
Foxy product color may vary from photographs.
Get the Peaks You Want
Collect only the peaks you want by programming desired peak detector options.
Level Sensing
Collect peaks
above detector
threshold,
enabling “heartcut” collection of
concentrated part
of the peak.
By combining Teledyne ISCO’s
accurate peak detection with
uniform fraction options,
Slope
Collect peaks
based on inflection
points. Separate
close peaks by
valley triggers.
Time Window
Collect only
during a specific
interval of time.
Delay
Compensation
Cut peaks at the
diverter valve
regardless of
system tubing
lengths.
desired peaks may be
collected, diverting other
peaks and baseline efuent
to waste.
Waste Waste Waste
Time
Window 1
Time
Window 2
Only desired peaks
are collected
Slope-detected peaks
Time windows bracket
desired peak fluids
2
Versatile Selection of Racks
Collect your fractions in the vessel type best suited for your application.
For large volume collection, bottles and funnels enable virtually unlimited sample collection. Racks now
include RFID tags for fast and accurate setup on the Foxy R2 fraction collector. The Foxy R1 and R2 use
the same convenient, lift-out racks as the legacy Foxy Jr. and Foxy 200 fraction collectors.
The rigid and warp-proof racks are made from
stainless steel and polypropylene. Funnel racks
uses chemically resistant ETFE or ECTFE,
and are available with tubing for organic
as well as inorganic applications.
2
3
4
1. 12–13 mm Tubes
2. 16–25 mm Tubes
3. Bottles
4. Funnel Racks
5. Scintillation Vials
6. Microcentrifuge Tubes
1
5
6
96 Well Plates
Hold up to six on the
Foxy R2
teledyneisco.com
Funnel Racks
Collect unlimited volumes
RFID Tags
Automatically configure
the Foxy R2
Flexible Collection Options
User-selectable options such as collection patterns, injection restarts, and arm movement speed
allow you to tailor the fraction collector operation to your specific collection needs.
Tube-to-tube
Speed
Select from ve
available speed
settings.
Collection
Patterns
Use serpentine
patterns for fast
row-to-row changes;
L-R patterns
for easy-to-nd
fractions.
Multiple
Injections
Collect from multiple
purication runs
restarted at regular
time intervals or
at Inject Pulse
signals.
multiple injections
the Restart Options
let you concentrate
fractions or create
tube groups.
When using
Easily Interface with Systems
Overlay
Next Tube
Skip Tube
S2 S2 S2
S1 S1 S1
S1 S1 S1
S1 S1 S1
Restart
S2 S2 S2
Restart
S2 S2 S2
Restart
Rear panel connectors on the Foxy R1 and R2 fraction collectors support system integration
with external pumps and detectors.
Detector I/O Signals
Analog Peak In
Inject Pulse In
External Peak In
Tube Advance In
Event Out
For easy connection to a system controller, the fraction
collectors support Ethernet and RS-232 communications.
An extensive library of commands allow remote operation
under software control.
Contact Teledyne ISCO to discuss
OEM Fraction Collector options for
integration with your purification
systems.
Pump I/O Signals
Volume Count In
Pause/Stop Out
4
Fraction Collector Selection Guide
Foxy R1
Inlet Tubing
and Flow Rates
Maximum Tube Height 160 mm 196 mm 180 mm
Racks 1, no detection 2, with RFID 2, with RFID
Maximum Tube Qty 144 12/13 mm tubes 288 12/13 mm tubes
Max Fraction Volume Unlimited with funnel racks
Construction Materials:
Racks
Funnel Racks
Diverter Valve
Construction
Drip Tray
Drop Former
Solvent Compatibility Aqueous and Organic
Test Tube Time Change 0.10 – 0.58 seconds
Memory Eight methods
Collection Modes: Time 00:00:01 – 99:59:59, 1 second intervals
Drop 1 – 999 drops per fraction
Volume Up to 999 units
Peak Detection Slope, Threshold, Three time windows,
System Control Front panel touch screen, Ethernet or RS-232
Inputs Pump counter, external peak, inject, tube advance: +3.3 to 5 VDC or contact closure,
Outputs Pump pause/stop and event (tube change), 300 ms:
Automatic Shut-off Rack full, last tube, end of time window or external signal
Security Valve (2-way) n/a
Diverter Valve (3-way) Included
Valve Pressure Rating 0 – 28 psi
Dimension: WxHxD 12.25 x 14.0 x 13.0 in
Weight 7.1 kg (15.6 lbs) 10.3 kg (22.8 lbs) 10.4 kg (22.9 lbs)
Power Requirements 100 – 240 VAC, 50–60 Hz, 1 ampere max.
Certification CE, CSA
1/16" OD (0.031" ID),
up to 25 mL/min
(25 to 125 mL/min with
high flow option)
Stainless steel and polypropylene
ECTFE (Halar) or ETFE (Tefzel) funnels
PEEK and FFKM (fluoroelastomer)
(dependent on collection vessel tube advance speed)
Combination of any of the above collection modes
active low, 30 ms minimum, 5 VDC max. Analog peak voltage: 0 to 1.0 V nominal,
–1.2 to + 1.2 V usuable, –5 to +5 V max.
open collector, active low, 15 VDC/100 mA maximum.
31.1 x 35.5 x 33.0 cm
Includes one IEC power cord supplied for regional AC power
Foxy R2
1/8" OD (0.062" ID),
25–125 mL/min
(up to 25 mL/min with
low flow option)
Cast Aluminum
Polypropylene
PEEK
12.25 x 14.9 x 21.0 in
31.1 x 37.8 x 53.3 cm
(100, 117, 234 VAC)
High Flow
Foxy R2
1/4” OD (0.125" ID),
up to 1 L/min
12.25 x 15.5 x 21.0 in
31.1 x 39.4 x 53.3 cm
teledyneisco.com
Ordering Information
Foxy R2 and Foxy R1
Foxy R1 fraction collector with diverter valve: Includes 1/16-inch OD
(0.031 ID) tubing for collection up to 25 mL/min and (1) rack for 13 mm
tubes. Other racks may be substituted; specify racks when ordering
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68-3870-012
Foxy R2 fraction collector with diverter valve: Includes 1/8-inch OD
(0.062 ID) tubing for collection up to 125 mL/min and (2) racks for
13 mm tubes. Other racks may be substituted; specify racks
when ordering .......................................68-2130-009
Foxy R2 fraction collector with high-flow diverter valve: Includes
compression fittings for 1/4-inch OD tubing. Maximum flow rate
1 L/min. Includes (2) racks for 25 mm tubes. Other racks may be
substituted; specify rack when ordering ................68-2130-007
Extra Racks for Foxy R1 & Foxy R2 (Order 2 racks for Foxy R2.)
13 mm diameter tubes (144).........................60-2137-150
16 mm diameter tubes (100).........................60-2137-151
18 mm diameter tubes (72)..........................60-2137-152
25 mm diameter tubes (36)..........................60-2137-153
1.5 ml microcentrifuge tubes (60)....................60-2137-154
29 mm centrifuge tubes (36). . . . . . . . . . . . . . . . . . . .....60-2137-157
28 mm diameter scintillation vials (36)................60-2137-156
96-well microplates (2).............................60-2137-159
Interface Cables for Foxy R1 & Foxy R2
HP1100/1200 system for remote start signal
and peak separation.............................60-5394-474
Non-Teledyne ISCO pump connect cable ...........69-2134-170
External control of Foxy R1 or R2 by
contact closure or TTL I/O........................69-2134-171
Accessories for Foxy R1 & Foxy R2
Tubing and fitting package for 25–125 mL/min
Glass bottles, 480 mL, case of 40 ..................60-2137-062
Set of two racks for (18) 480 mL glass bottles. Each rack holds (9)
bottles. Fits Foxy R2 only; requires qty. 1 set .............60-5247-004
96-well microplates (6)
For Foxy R2 only, requires qty. 1 ........................60-2137-139
Preparative funnel rack with 26 ETFE* or ECTFE** funnels and 50 ft.
of 3/8-inch ID vinyl, FEP-lined tubing. For Foxy R2 only, requires qty. 1.
Organic compatible . .................................60-2137-162
Preparative funnel rack with 36 ETFE* funnels and 50 ft. of 1/4-inch ID
vinyl tubing. (Requires 1 rack for Foxy R1; 2 racks for Foxy R2).
Non-organic.........................................60-2137-163
For complete information about
Teledyne ISCO chromatography
products, visit;
www.teledyneisco.com
* Equivalent to Tefzel, a registered trademark of E.I. DuPont de Nemours & Co.
** Equivalent to Halar, a registered trademark of Allied Chemical Corp.
6
Teledyne ISCO
P.O. Box 82531, Lincoln, Nebraska, 68501 USA
Toll-free: (800) 228-4373 • Phone: (402) 464-0231 • Fax: (402) 465-3091
teledyneisco.com
Teledyne ISCO is continually improving its products and reserves the right to change product
specifications, replacement parts, schematics, and instructions without notice.
L-5148 Rev 2.0
11/20
Loading...