Tektronix TL710 User manual
TL710 English Instruction Sheet
Page 1
TL710
Premium Test Leads
Instruction Sheet
Introduction
Premium test lead set features:
• Unique comfort grip probes
• Silicone insulated test leads withstand high
temperatures and remain flexible in cold
temperatures
• Lead length: 1.5 meters
• Compatible with all instruments that accept
standard 4 mm shrouded banana connectors
• Recommended for mV measurements
• Conforms to safety standard EN/IEC 61010-
031:2002 + A1:2008 and ANSI/CSA/UL 61010031:2007, 1000 V CAT II, Pollution Degree 2
• Maximum current: 10 Amps,
Maximum altitude: 2,000 meters,
Temperature rating: 0 to 55 °C
• One year warranty
PN 071-2703-01 Rev. 1, 6/2011
TL710 English Instruction Sheet
Safety Information
XW Warning
To avoid possible electrical shock or personal
injury:
.
• Do not use in CAT III or CAT IV environments
• Do not exceed the Measurement Category (CAT)
rating of the lowest rated individual component of a
product, probe, or accessory
• Use the test leads only as specified, or the
protection provided may be impaired
• DO NOT USE above maximum ratings
• Inspect test lead components for damage and
check for continuity. DO NOT USE test leads that
are damaged, or that have the inner contrasting
color of the wire exposed, or that show high
resistance
• Clean with a soft towel moistened with water and
mild detergent. DO NOT IMMERSE in liquid
• Intended for use only with instruments that have
adequate arc explosion protection
• Make sure test probes are firmly connected to
instrument and other accessories
• Do not use in wet or damp locations
Page 2
Loading...