Tektronix TL710 User manual

TL710 English Instruction Sheet
Page 1
TL710
Premium Test Leads
Instruction Sheet
Introduction
Unique comfort grip probes
Silicone insulated test leads withstand high
temperatures and remain flexible in cold temperatures
Lead length: 1.5 meters
Compatible with all instruments that accept
standard 4 mm shrouded banana connectors
Recommended for mV measurements
Conforms to safety standard EN/IEC 61010-
031:2002 and ANSI/CSA/UL 61010-031:2007, 1000 V CAT III, 600 V CAT IV, Pollution Degree 2
Maximum current: 10 Amps, Maximum altitude: 2,000 meters, Temperature rating: 0 to 55 °C
One year warranty
PN 071-2703-00
TL710 English Instruction Sheet
Safety Information
XW Warning
To avoid possible electrical shock or personal injury:
.
Use the test leads only as specified, or the protection provided may be impaired
DO NOT USE above maximum ratings
Inspect test lead components for damage and
check for continuity. DO NOT USE test leads that are damaged or show high resistance
Clean with a soft towel moistened with water and mild detergent. DO NOT IMMERSE in liquid
Intended for use only with instruments that have adequate arc explosion protection
Page 2
TL710 English Instruction Sheet
Page 3
Explanation of Symbols
Symbol Meaning
T
W
CAT III CAT IV
~
Parts protected throughout by DOUBLE INSULATION or REINFORCED INSULATION
Caution, refer to this documentation Product is designed to protect against transients in
fixed-equipment installations at the distribution level Product is designed to protect against transients
from the primary supply level, such as an electricity meter or an overhead or underground utility service.
Equipment Recycling. This product complies with the European Union’s requirements according to Directive 2002/96/EC on waste electrical and electronic equipment (WEEE). For more information about recycling options, check the Support/Service section of the Tektronix Web site (www.tektronix.com).
TL710 English Instruction Sheet
Page 4
Contacting Tektronix, Inc.
Tektronix, Inc. 14200 SW Karl Braun Drive P.O. Box 500 Beaverton, OR 97077 USA
For product information, sales, service, and technical support:
- In North America, call 1-800-833-9200.
- Worldwide, visit www.tektronix.com
Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
to find contacts in your area.
Warranty Information
For warranty information, go to www.tektronix.com/service, and then use the provided links to search for your product’s warranty.
Loading...