NEXT-GENERATION
OSCILLOSCOPES
3 SERIES MDO / 4 SERIES MSO
5 SERIES MSO / 6 SERIES MSO
Test Equipment Depot - 800.517.8431 - 5 Commonwealth Ave, MA 01801 - TestEquipmentDepot.com
Next-Generation Oscilloscopes
1
3
4
2
5
6
1) User interface designed for both
touch and mouse
2) Large touchscreen HD displays
(1,920 × 1,080)
3) Integrated spectrum analysis
4) Powerful analysis
• Automated measurements
with trend, histogram, and
spectrum plots
• Optional jitter analysis
• Power measurement options
11
10
5)
Bandwidth
• Models from 100 MHz to 10 GHz
All models offer upgradeable
•
bandwidth
6)
Input channels
• 2 to 8 inputs depending on model
• Low-loading probes included for
each channel
7)
Built in Arbitrary/Function
8
Generator option
8) Record length
• 10 Mpoints to 1 Gpoints depending
on model
9)
Up to 12-bit vertical resolution
(up to 16 bits in High Res mode)
97
10) Protocol options
• I2C / SPI
• I3C
• RS-232 / UART
• SPMI
• Ethernet
SDL
•
C
CAN / L
•
FlexRay
• USB 2.0
• I2S Audio
• eUSB2
• MDIO
Integrated DVM and trigger
11)
IN /
•
• SVID
• MIL-STD-1533 /
•
•
• Manchester
• NRZ
• Automotive
• SENT
• PSI5
frequency counter free with
product registration
MIP
I CSI/DSI
ARINC 429
Space
Wire
8b1
0b
Ethernet
Not all features shown are available on all oscilloscope models.
Usability and Display
Touch Interaction Done Right
These next-generation oscilloscopes feature the industry’s rst
oscilloscope user interface truly designed for touch. The same
intuitive gestures you use with your phone or tablet, work on the
big HD displays and the gestures are common among the 3, 4, 5
and 6 Series.
• Control inputs, triggers and acquisitions by tapping badges
in the settings bar at the bottom of the display
Drag waveforms to adjust position or to pan
•
•
Pinch to change horizontal or vertical scale
Stunning HD Displays
The 15.6" displays on 5 and 6 Series MSOs have 1920 × 1080 HD resolution. You can see many signals at once, along with critical
readouts and plots for an extensive view of your system.
Even with their bench-friendly footprints, the 3 and 4 Series offer the largest displays in their classes, with full 1920 × 1080 HD resolution.
1920 × 1080 pixels
1280 × 800 pixels
800 × 480 pixels
Display resolution on some competitors’ products is as low as 800 × 480 pixels. That’s less than 20% of the 1920 × 1080 pixel display resolution of the
3, 4, 5, and 6 Series products. Even larger 1280 × 800 pixels do not provide the same level of detail.
Performance and Measurements
More Inputs and Mixed Signal Analysis
The 4, 5 and 6 Series MSOs let you see more signals by going beyond
the traditional 4-channel limit, offering up to 8 analog input channels.
®
FlexChannel
visibility even further. Whenever you need to see more signals, just
plug a TLP058 logic probe into any input. The single analog channel
converts to 8 digital channels. FlexChannel inputs are backwardcompatible with TekVPI probes.
The 3 Series MDO offers 16 digital channels through a dedicated logic
probe, included with the MSO option.
Industry-leading Vertical Resolution
See more signal detail. The 4, 5, and 6 Series MSOs feature 12-bit analog-to-digital converters (ADCs) that provide 16 times
more vertical resolution than common 8-bit ADCs.
A new High Res mode further boosts vertical resolution and uses smart ltering to limit noise. High Res mode always provides
at least 12 bits and extends all the way to 16 bits of vertical resolution.
inputs on the 4, 5, and 6 Series MSOs expand your
8-bit ADCs 12-bit ADCs 12-bit ADCs with
Stacked Display Mode
Most scopes display all waveforms in the same graticule and rely on vertical
scale controls to t signals on the display. Each waveform uses a fraction of
the available ADC range, leading to less accurate measurements.
New stacked display mode lets you view each waveform in its own “slice”
of the display. Each slice represents the full ADC range for the waveform for
more accurate measurements.
The more traditional overlay display mode is also available, for easy direct
comparison of waveforms.
High Res turned on
New stacked display mode
Traditional overlay display mode
Powerful Measurements
The Results Bar on the right side of the display includes immediate,
one tap access to the most common analytical tools such as:
Cursors
•
•
Automated measurements
•
Measurement statistics
•
Searches
•
Bus decode tables
These scopes deliver rich insights by providing easy access to
measurement statistics. Turn on statistics in the Results Bar to get
a quick overview.
FastAcq™ High Speed Waveform
Capture
FastAcq captures at high speed to increase
the probability of seeing infrequent
problems such as runt pulses, glitches,
timing issues, and more.
FastFrame™ Segmented Memory
Make the most efcient use of acquisition
memory by not storing deadtime between
serial packets or bursts. Capture many
triggered frames in a single record.
Advanced Measurements and Analysis
Dive into measurements with Results Tables. Results Tables show
statistics for the current acquisition and for all acquisitions. Get insight
into one measurement, a hundred measurements, or millions of
measurements at a glance.
Plots, such as measurement trends and histograms, deliver quick insight.
Triggering and Search
A complete set of basic and advanced
triggers and search criteria.
• Runt
•
Logic
• Pulse width
•
Timeout
• Rise/Fall time
• Setup and hold
violations
• Serial and parallel
bus activity
• Sequence
•
Visual triggers*
• RF vs Time*
• Window*
* 4, 5, 6 Series only
An Oscilloscope for Every Engineer
3 SERIES MDO 4 SERIES MSO 5 SERIES MSO 6 SERIES B MSO
Bandwidth
Max channels, analog
Max channels, digital
Inputs
(see page 4)
Max sample rate
Record length
Vertical resolution
(see page 4)
Advanced analysis
(optional)
(see page 9)
100 MHz, 200 MHz,
350 MHz, 500 MHz, 1 GHz
4 6 8 8
16 48 64 64
TekVPI inputs FlexChannel inputs FlexChannel inputs FlexChannel inputs
2.5 GS/s or 5 GS/s, all channels 6.25 GS/s, all channels 6.25 GS/s, all channels 50 GS/s, 2 channels
10 Mpoints Up to 62.5 Mpoints Up to 500 Mpoints Up to 1 Gpoints
8 bits 12 bits 12 bits 12 bits
Serial bus
Power
200 MHz, 350 MHz,
500 MHz, 1 GHz, 1.5 GHz
Serial bus
Power
3-Phase Power
Spectrum analysis
(see page 8)
Operating system
(see page 8)
Display
(see page 3)
Hardware Spectrum Analyzer Spectrum View Spectrum View Spectrum View
Embedded Embedded
11.6" HD, capacitive touch
1920 × 1080
13.3" HD, capacitive touch
1920 × 1080
350 MHz, 500 MHz,
1 GHz, 2 GHz
1 GHz, 2.5 GHz, 4 GHz,
6 GHz, 8 GHz, 10 GHz
Bandwidth
Max channels, analog
Max channels, digital
Inputs
(see page 4)
Max sample rate
Record length
Vertical resolution
(see page 4)
Serial bus
Power
Compliance
Jitter
Inverters, Motors and Drives
Embedded
Windows (optional)
15.6" HD, capacitive touch
1920 × 1080
Serial bus
Power
Compliance
Jitter
Inverters, Motors and Drives
DDR3
Embedded
Windows (optional)
15.6" HD, capacitive touch
1920 × 1080
Advanced analysis
(optional)
(see page 9)
Spectrum analysis
(see page 8)
Operating system
(see page 8)
Display
(see page 3)
Integrated Spectrum Analysis
Spectrum View
Because traditional scope FFTs are driven by the same acquisition
system that delivers the analog time-domain view, it is virtually
impossible to get optimized views in both domains at once.
Spectrum View is different. It lets you independently adjust time- and
frequency-domain views, by using patented technology behind each
FlexChannel input. You can turn on a spectrum view for any analog
channel, enabling multi-channel mixed domain analysis.
Intuitive spectrum analyzer controls like center frequency, span and
resolution bandwidth (RBW) make setups easy, and RF vs time triggers
make capturing anomalies straightforward.
Built-in Arbitrary/Function
Generator (AFG)
An integrated function generator is perfect
for testing frequency response, simulating
sensor signals, and adding noise to signals
for stress testing.
•
13 standard waveform functions
•
50 MHz Sine / 25 MHz Square and Pulse
128k, 250 MS/s arbitrary waveforms
•
Connectivity
Every instrument includes a USB port
and LXI-compliant Ethernet port for
remote control. A thoroughly documented
programming interface supports custom
programming.
Built-in Spectrum Analyzer
The Tektronix 3 Series MDO offers an integrated, hardware-based
spectrum analyzer ranging from 9 kHz to 1 GHz (standard) or 3GHz
enabling spectral analysis on IoT and most consumer wireless
standards.
With e*Scope built-in, you can control
the oscilloscope over a network through
a standard web browser.
Optional Windows OS
The 5 and 6 Series MSOs offer the
option of including a Microsoft Windows
operating system. The option provides a
Windows desktop where you can install
and run additional applications on the
oscilloscope.
Upgrading to Windows is as simple as
plugging in a pre-congured SSD.
™
The Spectrogram display illustrates slowly moving RF phenomena. As the peaks
change in both frequency and amplitude the changes are easy to see.
Applications and Advanced Analysis.
Droop Point G Pass
Emphasis on Analysis.
Built-in features, available probes, and optional analysis packages
support a wide range of applications.
TLP058 Logic Probes
Have the right number of digital channels
when you need them. Simply connect a
TLP058 logic probe to any FlexChannel
input and get 8 digital channels. Connect
as many TLP058 probes you want.
TLP058 Specifications
Number of input channels 8 digital
Input resistance 100 kΩ±1.0%
Serial protocol trigger / analysis (optional). Support is available for most common serial
bus standards.
Power analysis packages enable
automatic measurement of harmonics,
switching loss and other key parameters.
Power Integrity. Power rail probes and
high channel count assist with power rail
validation.
EMI Troubleshooting. Spectrum analysis
tools help nd sources of unwanted
emissions.
Debug motor drive designs by viewing
the drive input/output voltage and current
signals in the time domain simultaneously
with the phasor diagram.
Advanced Analysis
TekExpress Ethernet
DUT001
1000BASE-T Test Report
Scope Information
Scope F/W Version 1.14.13.6144
Return Loss Signal Generator AFG31102
Jigmatch Signal Generator
DATA Probe Model TCA-SMA
DATA Probe Serial Number N.A
MCLK Probe Model TDP3500
MCLK Probe Serial Number B012249
SCLK Probe Model P6248
SCLK Probe Serial Number B021450
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
MSO64, QU100043
AFG31102
Jitter and timing analysis: Extended
analysis functions such as eye diagrams
and jitter analysis are optional.
Setup Information
DUT ID
Date/Time 2019-05-16 21:07:50
Device Type Ethernet
TekExpress Ethernet Version 1.1.0.11
TekExpress Framework Version 4.10.0.35
Execution Mode Live
Compliance Mode True
Overall Test Result Fail
Overall Execution Time 0:30:36
DUT COMMENT: General comment
Test Name Summary Table
Template Point A
Template Point B
Template Point C
Template Point D
Template Point F
Template Point H
Peak Point A
Peak Point B
Peak Point C
Peak Point D
Automatic compliance test and
debugging for popular serial standards.
Input capacitance 3.0pF
Min. detectable pulse width 1ns
Max. input toggle rate 500 MHz
Cable length 1.0m
Power Rail Probes
Probes designed especially for making
accurate ripple measurements on power
rails, with ± 60 V DC offset range, low noise
contribution and bandwidth up to 4 GHz.
TPR1000/TPR4000 Specifications
Bandwidth
Attenuation 1.25X
Input impedance
Dynamic range ±1 V
Offset range ±60 V
TPR1000: 1 GHz
TPR4000: 4 GHz
50 kΩ DC - 10 kHz,
50 Ω AC > 100 kHz
TPP1000/TPP500B
TAP1500
TDP1500
Passive Probes
Model Bandwidth Attenuation Input Impedance Maximum Voltage
TPP1000 1 GHz 10X 10 MΩ || 3.9 pF 300 V
TPP0500B 500 MHz 10X 10 MΩ || 3.9 pF 300 V
TPP0502 500 MHz 2X 2 MΩ || 12.7 pF 300 V
(CAT II)
rms
(CAT II)
rms
(CAT II)
rms
Active Probes
Model Bandwidth Attenuation
Input
Impedance
TAP1500 1.5 GHz 10X 1 MΩ || ≤ 1 pF ±8 V ±10 V ±15 V
TAP2500 2.5 GHz 10X 40 kΩ || ≤ 0.8 pF ±4 V ±10 V ±30 V
Dynamic
Range
Offset
Range
Maximum
Non-Destruct Voltage
Differential Probes
Model Bandwidth
Rise
Time
Attenuation
TDP0500 500 MHz ≤700ps 5X / 50X
TDP1000 1 GHz ≤350ps 5X / 50X
TDP1500 1.5 GHz ≤265ps 1X / 10X
TDP3500 3.5 GHz ≤140ps 5X ±2 V + 5 to -4 V 100KΩ/0.3pF differential
TDP4000 4.0 GHz ≤126ps 5X ±2 V + 5 to -4 V 100KΩ/0.3pF differential
Differential
Operating Voltage
±4.25 V (5X)
±42 V (50X)
±4.25 V (5X)
±42 V (50X)
±0.85 V (1X)
±8.5 V (10X)
Ground
Operating Voltage
Input resistance
/ Input capacitance
±35 V 1MΩ/1pF differential
±35 V 1MΩ/1pF differential
±7.0 V 200KΩ/1pF differential
TPP0850
THDP0200
TCP0030A
TDP7708
High Voltage Probes
Model Bandwidth Max Voltage Attenuation
20 kV
P6015A 75 MHz
TPP0850 800 MHz
40 kV peak
1000 V
2.5 kV peak
rms
rms
(CAT II)
1000X 100 MΩ || ≤ 3 pF 7 pF – 49 pF
50X 40 MΩ || 1.8 pF
Input
Impedance
Compensation
Range
Auto compensated
by scope
High Voltage Differential Probes
Model Bandwidth
Rise
Time
Attenuation
Maximum
Differential
Voltage
TMDP0200 200 MHz 1.8 ns 25X / 250X ±750 V 550 V
THDP0200 200 MHz 1.8 ns 50X / 500X ±1500 V 1000 V
THDP0100 100 MHz 3.5 ns 100X / 1000X ±6000 V 2300 V
Maximum
Voltage to
Earth Ground
(CAT I) 2 pF 5 MΩ
rms
(CAT II) 2 pF 10 MΩ
rms
(CAT I) 2.5 pF 40 MΩ
rms
Differential
Input
Capacitance
Differential
Resistance
Current Probes
Model Maximum Current Minimum Current Bandwidth Rise Time
TCP0030A 30 A DC; 30 A
TCP0020 20 A DC; 20 A
TCP0150 150 A DC; 150 A
; 50 A peak 1 mA DC - 120 MHz ≤ 2.92 ns
rms
; 100 A peak 10 mA DC - 50 MHz ≤ 7 ns
rms
; 500 A peak 5 mA DC - 20 MHz ≤ 17.5 ns
rms
High Bandwidth Differential Probes
Model Bandwidth
TDP7704 4 GHz
TDP7706 6 GHz
TDP7708 8 GHz
TDP7710 10 GHz
Tekex
Accessory
Attenuation
P77STFLXA,
P77STLFXB,
4X 100kΩ || 0.4 pF 5V ±5.25 V ±4 V
P77STCABL
P77BRWSR 10X 150kΩ || 22 pF 12V ±10 V ±10 V
P77C292MM Variable 50Ω (SMA) 2V ±4 V ±4 V
Input
Impedance
Differential
Input Voltage
Operating
Window
Input
Offset
Range
Options at a glance
For complete ordering details see the product datasheet or contact your local sales representative.
Base Models 3 Series MDO 4 Series MSO 5 Series MSO 6 Series B MSO
2 TekVPI channels MDO32
4 TekVPI channels MDO34
4 FlexChannel Inputs MSO44 MSO54 MSO64B
6 FlexChannel Inputs MSO46 MSO56 MSO66B
8 FlexChannel Inputs MSO58 MSO68B
Bandwidth
Digital channels • simply order TLP058 probes to enable 8 digital signals per probe
Arbitrary function generator • • • •
Instrument Options
Spectrum analyzer 1 GHz (std.), 3 GHz see Spectrum View analysis below
Extend record length (10 M standard)
8b10b serial decoding and analysis • •
Aerospace serial trig. and analysis (MIL-STD-1553, ARINC429) • • • •
Audio serial trig. and analysis (I2S, LJ, RJ, TDM) • • • •
Automotive serial trig. and analysis (CAN, CAN FD, LIN, FlexRay) • • • •
Automotive sensor serial triggering and analysis (SENT) • • •
Computer serial triggering and analysis (RS-232/422/485/UART) • • • •
Embedded serial triggering and analysis (I
SpaceWire serial decoding and analysis • • •
eUSB2 serial decoding and analysis • • •
Manchester decoding and analysis • • •
MIPI D-PHY (CSI/DSI) decoding and analysis • •
NRZ decoding and analysis • • •
PSI5 serial decoding and analysis • • •
SLDC serial decoding and analysis • •
Serial Decode Options
SVID serial decoding and analysis • • •
MDIO serial decoding and analysis • • •
Ethernet serial triggering and analysis (10BASE-T, 100BASE-TX) • • •
I3C serial decoding and analysis • • •
Power management serial triggering and analysis (SPMI) • • •
USB serial triggering and analysis (USB 2.0 LS, FS, HS) • • • •
Automotive Ethernet (100BASE-T1, 1000BASE-T1, 10BASE-T1S)
automated compliance test application
MIPI D-PHY 1.2 automated compliance solution •
Ethernet (1000BASE-T, 100BASE-T, 10BASE-T, 10Base-T1L)
automated compliance solution
Ethernet (2.5G and 5G BASE-T) automated compliance solution •
Automotive ethernet (10BASE-T1S) compliance solution •
USB2.0 automated compliance test solution • •
Compliance Options
DDR3 and LPDDR3 automated compliance solution •
Ethernet (10G BASE-T) automated compliance solution •
Advanced jitter and eye analysis • •
Spectrum View analysis included standard included standard included standard
Basic power measurements and analysis • •
Advanced power measurement and analysis • • •
DDR3 and LPDDR3 analysis and debug •
Enhanced security for instrument declassication • • • •
Inverter motor drive analysis • •
DQ0 measurements for inverter motor drives • •
Analysis Options
3-phase power measurements and analysis •
Vector Signal Analysis (SignalVu-PC) • •
Removable SSD with Windows license • •
2
C, SPI) • • • •
100 MHz, 200 MHz,
350 MHz, 500 MHz,
1 GHz
Service Options 3 Series MDO 4 Series MSO 5 Series MSO 6 Series MSO
Calibration service 3 or 5 years • • • •
Standard warranty extended to 3 or 5 years • • • •
Total product protection 3 or 5 years • • • •
200 MHz, 350 MHz,
500 MHz,1 GHz,
1.5 GHz
62.5 M/ch max
(31.25 M standard)
350 MHz, 500 MHz,
1 GHz, 2 GHz
125 M/ch max
250 M/ch max
500 M/ch max
(62.5 M standard)
• •
• •
1 GHz, 2.5 GHz,
4 GHz, 6 GHz, 8 GHz,
10GHz
125 M/ch max
250 M/ch max
500 M/ch max
1 G/ch max
(62.5 M standard)
High Speed Digitizers
5 Series MSO Low Profile
The 5 Series MSO is available in a 2U low-prole form factor.
Eight channels and 12-bit ADCs set a new standard when
extreme channel density and measurement performance
arerequired.
1 GHz bandwidth
•
•
6.25 GS/s sample rate
•
8 FlexChannel inputs
•
Record length from 125 M to 500 M
Software
TekScope PC Analysis Software
6 Series Low Profile Digitizer
The 6 Series Low Prole Digitizer sets a new standard for
performance by not interleaving sample rate, bandwidth
or record length. You get the fastest and most accurate
performance from your digitizer – all in a 2U space.
•
1 GHz to 8 GHz bandwidth
•
25 GS/s sample rate
4 inputs
•
•
Record length from 125 M to 1 G
SignalVu-PC Vector Signal Analysis
TekScope emulates the operation of a 4, 5 or 6 Series on your
PC. The basic package is free and lets you scale and measure
waveforms.
Purchased options add:
• Multi-scope waveform processing (4/5/6 Series)
•
Serial bus decoding
• Power analysis
• Jitter analysis
Copyright © Tektronix. All rights reserved. Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that
in all previously published material. Specication and price change privileges reserved. TEKTRONIX and TEK are registered trademarks of Tektronix, Inc. All other trade names
referenced are the service marks, trademarks or registered trademarks of their respective companies.
11/20 SBG 48W-61573-2
SignalVu-PC turns your Windows-equipped 5 or 6 Series MSO
into a wideband vector signal analyzer. It can be customized to
suit your appplication.
• Perform RF measurements
• Demodulate and analyze RF signals
•
Validate radar or pulsed RF
Loading...