TDS 300 Series
Features
Specs
Ordering Information
Digital Real-Time
TM
Oscilloscopes
TDS 340A * TDS 360 * TDS 380
This product is discontinued.
Characteristics
Signal Acquisition System.
Bandwidth -
TDS 340A: 100 MHz.
TDS 360: 200 MHz.
TDS 380: 400 MHz.
Sample Rate -
TDS 340A: 500 MS/s on each channel.
TDS 360: 1 GS/s on each channel.
TDS 380: 2 GS/s on each channel.
Channels - Two identical channels, each with invert function.
Sensitivity - 2 mV to 10 V/div (with calibrated fine adjust).
Position Range - ±5 divisions.
Calibrated Offset Ranges -
Volts/Div Setting Offset Range
2 - 99.5 mV/div ±1 V
100 - 995 mV/div ±10 V
1 - 10 V/div ±100 V
DC Gain Accuracy - ±2%.
Vertical Resolution - 8-Bits (256 levels over 10.24 vertical
divisions).
Acquisition Modes Sample, Envelope, Average
Peak Detect - High frequency and random glitch capture;
Captures glitches as narrow as 10 ns using acquisition hardware
at all time/div settings between 25 µs/div and 5 s/div (inclusive).
Time Base System (Main and Delayed)
Time/Division Range -
TDS 340A: 5 ns to 5 s/div.
TDS 360: 2.5 ns to 5 s/div.
TDS 380: 1 ns to 5 s/div.
Record Length - 1000 sample points per channel.
Horizontal Accuracy - ± 0.01%.
Roll Mode - 0.1 s/div and slower when Auto Trigger Mode is
selected.
Triggering System (Main Only)
Trigger Types - Edge, Video.
Trigger Modes - Auto, Normal.
Trigger Inputs - CH1, CH2, Line, External.
Video -Type Trigger Formats and Field Rates - Triggers on
Field 1, Field 2, Any Field (noninterlaced systems), or Lines;
from Sync-negative composite video. Triggers on broadcast
standard NTSC, PAL, or SECAM video and other interlaced
and noninterlaced video with horizontal line rates from 15 to
65 kHz (in 5 ranges) and field rates from 50 to 60 Hz.
Display
Sin(x)/x Interpolation.
Vector - Connects sample points to display a continuous
waveform.
Dots - Displays sample points only.
Vector Accumulate Mode - Accumulates waveform points
over a pre-set period of time (500 ms to infinity) and
superimposes the current waveform with bright vectors.
Dot Accumulate Mode - Accumulates waveform points over a
pre-set period of time (500 ms to infinity).
Format - YT and XY.
Automatic Measurements
Period
Frequency
+Width
-Width
Rise Time
Fall Time
+Duty Cycle
-Duty Cycle
+Overshoot
-Overshoot
High
Low
Max
Min
Pk-Pk
Amplitude
Mean
Cycle Mean
RMS
Cycle RMS
Burst Width
Cursors
Types - Horizontal bars, vertical bars, paired (volts @ time).
Measurements - Absolute volts, DELTA volts, time, and
frequency.
Physical Characteristics
Portable Rackmount
Dimensions mm in. mm in.
Width w/ handle 362 14.3 483 19
Height w/ pouch 191 7.5
w/o pouch 165 6.5 178 7
Depth (stand alone) 472 18.6 472 18.6
w/ front cover 490 19.3
w/ handle(s) 564 22.2 518 20.4
Weight kg lbs. kg lbs.
TDS 300 6.9 15.5
Domestic Shipping 13.1 29
14.4*
1
32*
1
*1 Weight of conversion kit only.
Waveform Processing
Arithmetic Operators - Add, subtract, multiply.
AutoSetup - Single button automatic setup on selected input
signal for vertical, horizontal, and trigger systems.
FFT Analysis - A mixed radix FFT routine is applied to the
time domain waveforms to analyze frequency content. A
Hanning Window is always applied to the acquired signal. The
display uses dBVRMS vertical scaling.
Non-Volatile Storage
Waveforms - Two 1000 point reference waveforms.
Setups - 10 front panel setups.
Floppy Drive - 3.5 in., 1.44 MB or 720 K DOS-compatible; PC
formats: .BMP, .TIF, .PCX, .EPS; spreadsheet formats: Excel,
Lotus123, and MathCAD for mathematical modeling and
analysis.
Option 14: I/O Interface
GPIB (IEEE -488.2) Programmability - Full talk/listen
modes; Control of all modes, settings, and measurements.
RS -232 -C Interface Programmability - Full talk/listen
modes; Control of all modes, settings, and measurements. Baud
Rate up to 38,400. 9-Pin, DTE.
VGA - Monitor output for direct display on
large VGA-equipped monitors.
Hardcopy Port - Centronics-type parallel, RS-232-C, or GPIB.
DC Power for Printer
Programmer Manual - (070-9442-00).
Hard Copy Capability
Graphics File Formats - Interleaf (.img), TIF, PCX (PC
Paintbrush), BMP (Microsoft Windows), and Encapsulated
PostScript (EPS).
Printer Formats - Thinkjet, Deskjet, Laserjet, Epson (9- &
24-Pin), Seiko DPU 411/II, DPU 412, DPU 414.
Available Printer Packs - 4 in. thermal printer and storage
pack (TDS4F5P).
Mechanical
Cooling Method - Forced air circulation with no air filter.
Environmental and Safety
Temperature - -10° to +55°C (operating); -51°C to +71°C
(non-operating).
Humidity - Up to 95% RH at or below +40°C; up to 75% RH
from 41°C to 55°C (operating and non-operating).
Altitude - To 15,000 ft/4,570 m (operating); to 40,000 ft/12,190
m (non-operating).
Electromagnetic Emissions - Meets EN50081-1; VFG 0243;
FCC Rules and Regs, 47 CFR, Part 15, Subpart B, Class A.
Safety - UL 3111-1 Listed, EN61010 Certified CAN/CSA
C-22.2 No. 1010.1-92.
Top of Page
Features
Specs
Ordering Information
Product(s) complies with IEEE Standard
488.1-1987, RS-232-C, and with Tektronix
Standard Codes and Formats.
Tektronix Measurement products are
manufactured in ISO registered facilities.
49A-10733-2p89, 06/1997, 09/01/1999
© Copyright Tektronix, Inc | webmaster@tek.com | Privacy Policy
Loading...