Tektronix 2000-MTCD-2 User manual
Model 2000-MTCD-2 Cable Assembly
The Model 2000-MTCD-2 Cable Assembly is used to communicate signals from a device under test (DUT) to the 20 input
channels of a Model 2000-SCAN-20 Scanner Card installed in a Model 2000 Digital Multimeter.
The cable assembly is 6 feet long and is terminated with a female DB44 connector and a male DB50 connector. The female
DB44 connector mates to the male DB44 connector (J1036) on the scanner card. Figure 1 and Table 1 provide the pin
designations for the connection. Refer to the Model 2000-SCAN-20 Instruction Manual for the detailed information needed to
configure and connect a test system.
J1036
1
16
31
15
30
44
Figure 1
DB44 connector
Table 1
Connector J1036 input connector pin designations
Mux Terminal
Channel 1, HI 26 1 Blue/Red Channel 11, HI 2 11 Red/Black
Channel 1, LO 11 18 Red/Blue Channel 11, LO 1 28 Black/Red
Channel 2, HI 29 2 Orange/Red Channel 12, HI 21 12 Yellow/Black
Channel 2, LO 14 19 Red/Orange Channel 12, LO 6 29 Black/Yellow
Channel 3, HI 33 3 Green/Blue Channel 13, HI 24 13 White/Red
Channel 3, LO 34 20 Blue/Green Channel 13, LO 9 30 Red/White
Channel 4, HI 23 4 Orange/Black Channel 14, HI 41 14 White/Blue
Channel 4, LO 8 21 Black/Orange Channel 14, LO 42 31 Blue/White
Channel 5, HI 39 5 Green/Orange Channel 15, HI 18 15 White/Black
Channel 5, LO 40 22 Orange/Green Channel 15, LO 3 32 Black/White
Channel 6, HI 43 6 White/Yellow Channel 16, HI 35 16 Green/Yellow
Channel 6, LO 44 23 Yellow/White Channel 16, LO 36 33 Yellow/Green
Channel 7, HI 20 7 Blue/Black Channel 17, HI 25 17 Green/Red
Channel 7, LO 5 24 Black/Blue Channel 17, LO 10 50 Red/Green
Channel 8, HI 37 8 Green/Brown Channel 18, HI 28 34 Brown/Red
Channel 8, LO 38 25 Brown/Green Channel 18, LO 13 35 Red/Brown
Channel 9, HI 27 9 Yellow/Red Channel 19, HI 19 36 Green/Black
Channel 9, LO 12 26 Red/Yellow Channel 19, LO 4 37 Black/Green
Channel 10, HI 30 10 White/Green Channel 20, HI 22 49 Brown/Black
Channel 10, LO 15 27 Green/White Channel 20, LO 7 48 Black/Brown
NC 16 — — NC 31 — —
NC 17 — — NC 32 — —
Pin Designator
DB44 DB50
Wire Color Mux Terminal
Pin
Designator
DB44 DB50
Wire Color
PA-565 Rev. A / 2-98