TEFAL IXEO POWER QT20 Series Manual
EN
www.tefal.com
IXEO POWER QT20XX
1820002720
EN
Important guidelines
Safety information
• Read the instruction manual carefully before using your appliance for
the rst time. This product is designed for domestic and indoor use
only. Any commercial use, inappropriate use or failure to comply with
the instructions, the manufacturer accepts no responsibility and the
guarantee will not apply.
• Do not unplug your appliance by pulling on the power cord. Always
unplug your appliance:
– before lling the water tank or rinsing the boiler,
– before cleaning the appliance,
– after each use.
• The appliance iron does not work without the scale collector
(depending on the model).
• The appliance must be used and placed on a at, stable and heatresistant surface. When you place the iron on the iron rest, ensure
that the surface on which you place it is stable. Do not place the base
unit on the ironing board cover or on a soft surface.
• This appliance is not intended to be used by individuals (including
children) with reduced physical, sensory or mental capabilities, or
those lacking experience or knowledge, unless they have been given
prior instruction on how to safely use the appliance or are under the
supervision of a person responsible for their safety.
• Children must be supervised to ensure that they do not play with the
appliance.
• This appliance may be used by children aged 8 years and older and
by individuals lacking experience or knowledge or with reduced
physical, sensory or mental capabilities, provided that they have
been thoroughly instructed regarding the use of the appliance, are
supervised, and understand the risks involved. Children must not
play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision. Keep the iron and its power
cord out of reach of children under 8 years of age when it is in use
or cooling down.
2
• The surfaces of your appliance can reach very high temperatures
when functioning, which may cause burns. Do not touch the hot
surfaces of the appliance (accessible metal parts and plastic
parts adjacent to the metallic parts).
• Never leave the appliance unsupervised while it is connected to the
mains. Before storing the appliance, once it is unplugged, please wait
until it has cooled down completely (around 1 hour).
• It is very important not to use descaling products (vinegar, industrial
descalers, etc.) to rinse the boiler, as they may damage it.
• Before emptying the boiler/rinsing the collector (depending on the
model), always wait until the appliance has cooled down and has
been unplugged for over 2 hours before loosening the drainage/
collector cap.
• Caution: If the cap or drainage cap (depending on the model) is
damaged, have it replaced by an approved service centre.
• Never ll the appliance directly from the tap.
• The lling, descaling, rinsing and inspection apertures, which are
under pressure, must not be opened during use.
• Care should be taken when using the appliance due to emission of
steam
• Unplug the appliance during cleaning & lling
• The appliance must not be used if it has been dropped, if it appears
to be damaged, if it is leaking or is not working correctly. Do not
attempt to dismantle your appliance: take it to an approved service
centre to avoid any danger.
• If the power cord or steam cord of your appliance is damaged, it
must be replaced by an approved service centre in order to avoid
any danger.
• The fabric steamer must not be left unattended while it is connected
to the supply mains.
• Keep the fabric steamer and its cord out of reach of children less
than 8 years of age when it is energized or cooling down.
• All accessories, consumables and removable parts must be bought only from an approved service centre.
• For your safety, this appliance conforms to all applicable regulations (Low Voltage, Electromagnetic Compatibility and Environment Directives, etc.).
• Your steam generator iron is an electrical appliance: it must be used under normal conditions of use.
• It is equipped with 2 safety systems:
– a valve to prevent the build-up of pressure, which allows excess steam to escape in the event of the appliance malfunctioning,
– a thermal fuse to prevent overheating.
• Always plug your appliance:
3
1
2
7
6
8
9
10
11
3
4
5
12
13
17
16
15
14
– into a mains circuit with voltage between 220 V and 240 V (Alternating current only),
– into a socket outlet with an earth connection.
Faulty connection can cause irreparable damage to the appliance and will invalidate your guarantee. If you are using an extension cord, ensure that
it is correctly rated (16A) with an earth connection, and is fully extended.
• Unwind the power cord fully before plugging it into an earthed plug socket.
• Never touch the power cord or steam cord with the soleplate of the iron. Do not leave the power or water connection cords close to or in contact
with sources of heat or sharp edges.
• The water in the appliance may still be hot and cause burns even after 2 hours of cooling down. Handle the appliance with care when the cap/
collector is removed, particularly when you are emptying it.
• Your appliance emits steam that may cause burns.
– Handle the iron with care, particularly when using the vertical steam function.
– Never steam clothing when it is worn by a person, always steam it on a hanger.
– Never iron in a seated position with your legs below the ironing board.
– Never direct the steam towards people or animals.
• The rst time the appliance is used, there may be some fumes and smell but this is not harmful.
• Never immerse your steam generator iron in water or any other liquid. Never place it under tap water.
What water should I use?
• This appliance has been designed to be used with untreated tap water. If your water is very hard, (hardness above 30°F, or 17°dH or 21°e) use a
mixture of 50% tap water and 50% distilled water. In some seaside regions, salt content might be high. In that case, use only water bottle, with low
mineral lever
• They are dierent type of softened water, and most of them can be used in your steam gen. However, some of them, especially the one with
chimical components, like salt, might occur white or brown runs. If you face this type of issue, we recommand you to use non-treated tap water or
bottled water.
• You should not use water from domestic appliances, with additives ( starch, perfume, etc.) , rain water, boiled, ltered, bottled water. Do not use
pure distilled nor pure demineralised water. Such water might aect steam attributes and at high temperature generate steam chamber sediment,
liable to stain your linen and provoque early appliance aging.
PLEASE RETAIN THIS INSTRUCTION MANUAL
Help protect the environment!
Your appliance contains a number of recoverable or recyclable materials.
Take these to a collection centre, or to an approved service centre for processing.
Troubleshooting problems with your steam generator iron
PROBLEMS CAUSES SOLUTIONS
Water is dripping from the holes in
the soleplate
White streaks are dripping from
the holes in the soleplate
Brown streaks are dripping from
the holes in the soleplate and
staining the laundry
The soleplate is dirty or brown and
may mark the laundry
The soleplate is scratched or
damaged
The red
“WATER” indicator light is ashing*
The “anti-scale” indicator light is
ashing*
The steam generator iron will not
turn on or the iron indicator light
and the “ON-OFF” indicator light
will not turn on.*
The red “WATER” indicator light is
ashing and the “ON-OFF” button
is not working.*
The water has condensed in the tubes because
you are using the steamer for the rst time or
have not used it for a while.
Your boiler is emitting limescale as it is not
rinsed regularly.
You are using chemical descaling agents or addi
tives in the water.
The iron is being used on too high a tempera
ture.
You have placed your iron at down on the metal
iron rest.
You have not pressed the “OK” button. Press the “OK” button located on the control panel
You have not pressed the “OK” button. Press the “OK” button located on the control panel
The “auto-o” system is activated after 30 min
utes of non-use and has turned o your steam
generator iron.
The appliance has been stored in a cold area
(around <10C°)
Press the steam button away from your ironing
board until the iron emits steam.
Rinse the boiler as instructed in the user manual.
Never add any product to the boiler (see the sec
tion “What water should I use?”)
Clean the soleplate as instructed in the user man
ual. Use a lower temperature.
Always place your iron on its iron rest.
until the indicator light goes o.
until the indicator light goes o.
-
Press the “ON-OFF” restart button located on the
control panel.
Unplug the appliance. Leave the appliance for 3
hours until it reaches ambient temperature.
-
-
* Depending on the model
If you cannot determine the cause of the problem, consult an approved after sales care service.
4
1. Product presentation
1
12
2
13
3
4
14
5
15
7
16
6
8
17
11
9
10
5
Loading...