TechniSat Z-Wave Stick 1 User Manual

Page 1
User Manual
TechniSat Z-Wave® Stick 1
Page 2
Introduction
Thank you for choosing TechniSat's Z-Wave Stick 1. This product can be operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
Operation
This device cannot do Z-Wave network operations on its own, it needs a Z-Wave certified controller software application to perform Z-Wave network operations. Please connect the Z-Wave Stick 1 to a USB port of your TechniSat Smart Home enabled receiver/TV. Refer to your TechniSat's Smart Home enabled receiver/TV manual on how to perform Z-Wave network operations.
Specification
Protocol: Z-Wave Frequency: 868,42 MHz; 869,85 MHz Art.No.: 0000/9536 EAN 4019588 095366
Z-Wave and Z-Wave Plus are registered trademarks of Sigma Designs and its subsidiaries in the United States and other countries
Page 3
Subject to technical changes and errors.
Subject to change for amendments and printing errors Last updated: 3/17
Duplication and reproduction only with the publisher's approval.
TechniSat are a registered trademark of
TechniSat Digital GmbH
PO box 560
54541 Daun (Germany)
www.technisat.de
Technical Hotline
Mon. - Fri. 8:00 - 20:00
03925/9220 1800
Caution!
If you encounter a problem with this equipment, please contact our Technical
Hotline initially.
Loading...