Specifications and Main Features
- Model: Technics SA-EX300 / SA-EX100
- Power Output (DIN 1 kHz, T.H.D. 1%):
- SA-EX300: 250 W (8 Ohm)
- SA-EX100: 210 W (8 Ohm)
- Continuous Power Output:
- SA-EX300: 230 W (8 Ohm)
- SA-EX100: 2 x 80 W (8 Ohm)
- Total Harmonic Distortion:
- Rated Power at 40 Hz~20 kHz: 0.5% (8 Ohm)
- Half Power at 1 kHz: 0.03% (8 Ohm)
- FM Tuner Section:
- Frequency Range: 87.50-108.00 MHz
- Sensitivity (IHF usable sensitivity): 1.5 µV/75 Ohm
- Total Harmonic Distortion (STEREO): 0.3%
- AM Tuner Section:
- Frequency Range: AM 522-1611 KHz (9 kHz steps)
- Sensitivity: AM 20 µV, 330 µV/m
- Power Consumption:
- SA-EX300: 200 W
- SA-EX100: 160 W
- Dimensions (W x H x D):
- SA-EX300: 480 x 136 x 358 mm
- SA-EX100: 430 x 136 x 309 mm
- Weight:
- SA-EX300: 8.7 kg
- SA-EX100: 6.2 kg
- Tone Controls:
- Bass: 60 Hz, +10 to -10 dB,
- Treble: 20 kHz, +10 to -10 dB,
- Headphones Output Level and Impedance: 430 mV/330 Ohm
- Speaker Impedance:
- Front: 8-16 Ω
- Center: 8-16 Ω (SA-EX300 Only)
- Speakers for Surround: 4-16 Ohm ( Only available for SA-EX300 Model).
Frequently Asked Questions
- Which speakers does SA-EX300 support?
It supports surround range from 8-16 to 4-16 and center channel speakers between 8-16 ohms.
- What is the max power for SA-EX100?
Stated above the max power output for SA-EX100 is 210 W for an 8 Ohm impedance.
- Does this device allow access to both FM and AM radios?
Absolutely Yes, FM and AM capabilities are integrated into this device.
- What is the working procedure of Sleep Timer?
A sleep timer can be set to the unit for 30,60, or 90 minutes intervals.
- Is Dolby pro logic supported by this device?
Yes, for greater sound quality the SA-EX300 model supports Dolby Pro Logic.
- And what power source is required for this device?
230-240V 50Hz/60Hz AC.
User Manual
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Page 9
Page 10
Page 11
Page 12
Page 13
Page 14
Page 15
Page 16
Page 17
Page 18
Page 19
Page 20
Page 21
Page 22
Page 23
Page 24
Page 25
Page 26
Page 27
Page 28
Loading...