High Speed
Cable Internet
Setup Guide
We are here to help. Feel free
to contact us with questions
or to provide feedback.
For additional information, please visit the FAQ section of
our website at www.acanac.com. To provide feedback, please
submit a customer review via our website or our Facebook
page. For other questions, please call our Customer
Experience team at 1-866-281-3538. You can also receive
Technical Support at the same number – you can also send
us an email at technical.support@acanac.com.
170207_ACANAC_TC4300_en.1
It’s good to be here.
Ethernet
Cable (1)
Technicolor Modem*
and power supply
Back of Technicolor Modem
STEP 2
Using the Ethernet cable provided, connect your laptop
(or the Internet / WAN port of your router if you would
like a network setup) to the modem’s ETHERNET port.
Back of Modem
Please wait for the modem to boot-up. The Technicolor modem must have solid
POWER, DS, US and ONLINE green or blue lights displayed. The LINK light should be
either solid or ashing. A ashing LINK light indicates data transferring. If the lights
do not behave as described, repeat steps 1 and 2.
Technicolor Modem Lights
LIGHTS READ
Power Solid
DS Solid
US Solid
Online Solid
LINK Solid or Flashing
STEP 3
Front of Technicolor Modem
Thank You for choosing Acanac
In order to ensure the smooth setup of your Acanac High Speed Cable
Internet service, please follow the easy steps laid out in this guide.
CO NGR ATU LATI ONS ! YO UR
SETUP IS NOW COMPLETE.
The setup kit for your High Speed Cable
service should contain the following items:
Before beginning the setup process, please ensure
that all of your equipment is turned o.
* Please note that the modem shown is for the purposes of illustrating the
setup process and may dier from your device.
If you require a longer length of coaxial cable, this
can be purchased at most home electronic stores.
STEP 1
Connect the coaxial cable emerging from your cable outlet
to the CABLE port located on the back of the modem.
Cable Outlet
Coaxial Cable
Ethernet Port
Ethernet Cable
You may now turn all your devices back on.
Loading...