WARRANTY PROCEDURE
v1.5.2: DEC 2011
Please read th e ow n er ’s m anu al caref ul l y and ensure that you have followed the correct installation and operating
procedures.
1. Please read this warranty card.
2. Keep your pur chase r ec eip t t o en abl e you t o pr oc eed qui ckly in th e even t of a Warranty Servic e.
3. If you require Warranty Service, please contact the TEAC Customer Support Hotline at 1300 553 315 for
assistance. Pl eas e ens u re that you h ave th e m odel number, serial number an d purchas e r ec eipt ready when
you call.
Please complete the section below and keep this information for your own records.
Owner’s Name
Owner’s Address
Postcode
Model Name/No. Serial No.
Dealer’s Name
Dealer’s Address
Postcode
Authorised Service Centr es in Major A ustralian Cities
NSW
151 Arthur Street
Homebush West, NSW 2140
Queensland
Unit 1, 320 Curtin Ave West
Eagle Farm, QLD 4009
Western A ust r alia
Unit 2, 50 Pilbara Street
Welshpool, WA 6106
South Australia
11 McInnes Street
Ridleyt on, SA 5008
Victoria
282 Normanby Road
South Mel b our n e, V IC 32 05
Thank you for selecting a TEAC product
.
If you should r equire assistance with your product r egar ding its setup
or operati on, or if any difficulties arise, please cal l us directly for advice
between Monday to Friday at 8.30AM – 6PM AEST at the
TEAC Customer Support Hotline
1300 553 315
WARRANTY INFORMATION
v1.5.2: DEC 2011
Our g oods com e with guarantees that cannot be excluded under the Australian Consum er L aw . You are
entitled to a replacement or refund for a major failure and for compensation for any other reasonably
fo re se eable l os s or damag e. You ar e al s o e n t i t l e d t o h av e the goods repaired or replaced if the goods f ail
to be of acceptable quality and the failure does not amount to a major failure.
Warranty Terms & Conditions
1. TEAC war rant s t hat t his pr oduct is f r ee fr om def ects in mat eri al an d wor km ans hip u nder n ormal dom estic use with
reason able care and skill. Mainten ance and c leaning ( i.e. las er head) is not cover ed by this warrant y. The TEAC
warrant y on l y applies to TEAC products purchased, used and serviced in Australia.
2. The ben efits to t he c onsum er given b y this W arrant y ar e in addit ion to other r ights and r emedies of the c onsum er
under a law in rel at i on t o goods or s er vices to whic h th e w arranty rel ates, b ein g the Austral ian Consu m er Law.
3. Refund or replac emen t via y our r etail er is av ail able f or a peri od of 14 da ys after purch ase f or goods that h ave been
inspected and det ermined t o ha ve a m aj or failure. R efu nd and exch ange is not app licable f or ch an g e of mi nd.
4. Subject to the terms herein, this warran ty effecti vely covers the equip ment as sp ecified i n the Warr anty Periods
Table below from the date of purchase.
TEAC PRODUCT
WARRANTY PERIOD
LED/LCD TV 32” (80 cm) and above
1 Year (In-Home Service/ Pick up Available)*
All other TEAC products
1 Year (Carry-in Service)
5.
Th is s ervice will onl y b e provided as part of this w arranty if all the following conditions ar e met;
In Home Service/Pick up* Service
a) The produc t is in dicated in th e Warranty Period T able.
b) The product is within the warranty period.
c) The product is located within the normal service area of the local TEAC Authorised Service Centre.
If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking the product to
a TEAC Authorised Service Centre.
Where In-Home service/Pick up* is not available, the purchaser is required to send the product to the nearest TEAC
Author is ed Ser vic e C entr e f or r epair . In this e vent , pr o of of pur ch ase is r equir ed to s upp ort a warr ant y cl aim. Aft er
the rep air, t he pr od uct will be avail abl e for c oll ecti on by or retur n to the pur chas er at a fee upon req uest. TE AC inhome service can be made available at a fee upon request.
Carry-in Service
6. A 12-month replacement warranty is applicable to all Accessories such as Remote, Power Adaptors and Cables.
7. TEAC will ensure to t he best of its ab il it i es th at all req uired parts are mad e avai l ab le for any required s ervice/r ep air.
8. TEAC Aus tralia Pt y Ltd and its Au thorised S ervic e Centres will use their best endea vours to c omplete produc t
repairs within a reasonable period based on available resources and workload during the time when service is
request ed an d perform ed.
9. Refurbis hed p arts m ay be us ed to r epair t he prod uct. I n the c ase of a replac ement, the pr oduct may be r eplac ed,
with a ref urbished unit of the s ame type or , if one is unavailab le, a si milar refur bished m odel with equal or b etter
features & specifications.
10. Please b e advised that if th e prod uc t presented f or repair is capab le of r etainin g user-g en erated d at a, the d at a m ay
be lost during servicing. Customers are strongly encouraged to back up all important information/data before
sending the product in for service/repair.
11. Servic e will be pr ovided on ly dur ing norm al busin ess hour s and under saf ety condi tions and circ umstanc es. TEA C
and its aut h or ised ser vice agents can r efuse any r ep ai r if saf ety, i n relati on t o O H &S, bec om es a c oncern t o its s t af f
or author ised service agents ’ p ersonnel.
12. The warranty is void and warranty claims may be refused, subject to the Australian Consumer Law, if:
a) The product was not transported, ins talled, op erated or m aint ained a c c ordin g t o m an uf acturer ins tr uc t ion, or
b) The produc t w as abused, dam ag ed, tamp ered, alt ered or rep aired by any un au thoris ed p ersons, or
c) Product failure is due to accidents during use, installation or transit, power surges, use of defective or
incompat ib le exter nal devic es, exp os ure to abn orm al cond itions suc h as excess iv e temp erat ur es or humi dity, or
entry of liqu ids, obj ects or creatur es in to the produc t.
13. No one is au thoris ed t o ass u m e any liability on b eh alf of TEAC or impose any ob ligati on on it, in connecti on with the
sale of any eq ui p m ent other than as stated in th is w arr an t y and ou t l in ed ab ove.
14. TEAC reserves the right to inspect and verify whether the product is exhibiting a major failure as claimed by
customers/retailers.
15. LCD dead pixel policy, please contact TEAC Customer Support Hotline on 1300 553 315 for assistance.
WARNING
To prevent fire or shock hazard, do not expose this appliance to water.
IMPORT ANT
Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit
off when not in use or move it away from the affected radio tuner.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
The lightning flash and
arrowhead within the
triangle is a warning sign
alerting you of
"dangerous voltage"
inside the product.
The exclamation point within
the triangle is a warning sign
alerting you of important
instructions accompanying
the product.
WARNING : TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO
USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING : To reduce the risk of fire or electric shock, do not expose this appliance to rain or
moisture.
DANGER
This product contains a low power laser device.
LASER SAFETY
This unit employs an optical laser beam system in the CD mechanism, designed with built-in
safeguards. Do not attempt to disassemble, refer to qualified service technician.
Exposure to this invisible laser light beam may be harmful to the human eye.
THIS IS A CLASS-1 LASER PRODUCT. USE OF CONTROLS, OR ADJUSTMENTS OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN, MA Y RESUL T IN HAZARDOUS LASER
LIGHT BEAM EXPOSURE.
The marking plate are indicated on the bottom side of the unit.
CLASS 1 LASER
PRODUCT
CAUTION
INVISIBLE LASER
RADIATION WHEN OPEN
AND INTERLOCKS
DEFEATED.
AVOID EXPOSURE TO
BEAM.
1
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:514
LOCATION OF CONTROLS
1. VOLUME KNOB
2. FUNCTION SWITCH
3. TUNING KNOB
4. PLAY / PAUSE BUTTON
5. STOP BUTTON
6. PROGRAM BUTTON
7. REPEAT BUTT ON
8. NEXT SKIP / SEARCH FORWARD
BUTTON
9. BACK SKIP / SEARCH BACKWARD
BUTTON
10. DIAL SCALE
11. DIAL POINTER
12. CD DOOR OPEN POSITION
13. CD DOOR
14. CD TRACK DISPLAY
15. REPEAT INDICA TOR
16. PLAY / PAUSE INDICATOR
17. FM STEREO INDICATOR
18. PROGRAM INDICATOR
19. TELESCOPIC ANTENNA
20. HANDLE
21. SPEAKER
22. BAND SWITCH
23. HEADPHONE JACK
24. AC SOCKET
25. BATTERY COMPARTMENT DOOR
26. RANDOM BUTTON
27. D.B.S. ON/OFF SWITCH
23
25
24
22
19
2
3
21
26
5
8
4
9
18
17
13
20
1
11
10
27
14
16
7
6
15
12
21
2
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:515
POWER SOURCE
BA TTERY POWER OPERA TION
1. Open the BATTERY COMPARTMENT DOOR by pushing the catches downwards.
2. Install 6 x C size batteries carefully according to the +/- polarity marks in the battery compartment.
3. Close the BA TTERY COMPARTMENT DOOR.
AC POWER OPERATION
Connect the receptacle end of the power cable to the AC SOCKET and the plug into an AC outlet.
OPERA TION OF UNIT
RADIO OPERATION
RECEPTION OF RADIO BROADCASTING
1. Set the FUNCTION SWITCH to the RADIO position. Set the desired radio band with the BAND
SWITCH.
2. Tune in a desired station by tuning the TUNING KNOB.
3. For FM reception, extend the telescopic antenna and adjust the direction, length and angle to get the
bestreception.
4. For AM reception, rotate the unit to get the best reception.
5. Adjust the VOLUME to the desired listening level.
6. To turn off the radio, set the FUNCTION SWITCH to the OFF position.
PLA YING COMP ACT DISC
- Set FUNCTION SWITCH to CD position.
- Open the CD DOOR, place a CD into the compact disc compartment and close the CD DOOR. The
printed label side facing upward.
- The CD TRACK DISPLAY will show the total number of tracks after a few seconds.
- " - - " will be displayed when there is no CD inside the CD compartment.
CD-R AND CD-RW PLAYABLE
This unit can play normal audio CD, CD-R and CD-RW discs.
PLA Y / P AUSE BUTT ON
Press once to start playing the CD, the CD TRACK DISPLAY will show the first track and the PLAY /
PAUSE INDICATOR will light up. Press once again to stop playing the CD temporarily. The PLAY / PAUSE
INDICATOR will be flashing. Press once again to resume playing.
STOP BUTTON
Press once to stop playing the CD.
NEXT SKIP / SEARCH FORWARD BUTTON
Press once to skip to next track. Press and hold to fast forward to a desired position within the audio track.
Release the button to resume normal play.
BACK SKIP / SEARCH REWIND BUTTON
Press once to skip back to the beginning of the current track. Press repeatedly to go to previous tracks.
Press and hold to fast forward to a desired position on the audio track. Release the button to resume normal
play.
ACCESSORY LIST :
1 x AC line cord
1 x Instruction manual
3
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:516
To place a CD into the unit, open the CD DOOR and fit the CD securely into position.
To remove the CD from the unit, press the STOP BUTTON, open the CD DOOR and take out the CD.
To turn off the CD playing function, set the FUNCTION SWITCH to OFF position.
DBS ON/OFF SWITCH
When the DBS ON/OFF switch is set to the ON position, the dynamic low frequency ranges are boosted.
CD PROGRAM PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be
programmed into a playlist.
1. Press the PROGRAM BUTTON once, the PROGRAM INDICATOR and " 0 " will flash in the CD
TRACK DISPLAY.
2. Press the "BACK SKIP / SEARCH BACKWARD" and / or "NEXT SKIP / SEARCH FORWARD"
BUTTONS to select the desired track number.
3. Press the PROGRAM BUTTON again to memorise the track into the playlist.
4. Repeat steps 2 and 3 until all desired tracks are programmed.
5. Press the PLAY / PAUSE BUTTON to start playing. PROGRAM INDICATOR will light up.
6. Press the STOP BUTTON to stop programmed playback.
NOTE : Programming can only be made when the CD playing is in stop mode.
CARE AND MAINTENANCE
Caring for Compact Discs
* Treat the disc carefully. Handle the disc only by its edges. Never allow your
fingers to come in contact with unprinted side of the disc.
* Do not attach adhesive tape, stickers, etc. to the disc.
* Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents
or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
* If a disc skips or gets stuck on a section of the disc, it is probably dirty or
damaged (scratched).
* When cleaning the disc, wipe in straight lines from the center of the disc to the outer edge of the disc.
Never wipe in circular motions.
* This unit is designed to play only Compact Discs bearing the identification logo as shown here.
Other discs may not conform to the CD standard and may not play properly.
* Compact Discs should be stored in their cases after each use to avoid damage.
* Do not expose Compact Discs to direct sunlight, high humidity, high temperatures,
or dust, etc. Prolonged exposure or extreme temperatures can warp the disc.
REPEAT BUTTON
- Press once for single track repeat playing and the REPEAT INDICATOR will be flashing.
- Press twice for all tracks repeat playing and the REPEAT INDICATOR will light up.
- To cancel the repeat play mode, press the REPEAT BUTTON once or twice until the REPEAT
INDICATOR turn off.
RANDOM BUTTON
When playing the CD, press the RANDOM button once to enter random playing mode. All the songs will be
played in a random sequence Press the RANDOM button once more to return to normal playing mode.
RANDOM mode can not function under programmed playing mode.
4
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/6/2, ¤U¤È 03:467
Specifications
CD
Power supply : ~ 240V AC / 50Hz
6 x C size Batteries - not included)
Power consumption : 6W
Operating temperature : -10~40
° C
Frequency response : CD - 125 Hz - 15000 Hz
Distortion :
≤≤
≤≤
≤5%
Dimensions : 252 (W) x 239 (D) x 154 (H) mm
Weight (net) : 1.6 kg
Tuner
FM Frequency range : 88-108 MHz
AM Frequency range : AM 531-1602 kHz
FM noise limit sensitivity :
≤≤
≤≤
≤20
μμ
μμ
μV
FM S/N :
≥≥
≥≥
≥40dB
Accessories
AC line cord : 1
Instruction manual : 1
* Features and specifications are subject to change without notice.
* Weight and dimensions are approximate.
* All trademarks and registered trademarks are the property of their respective owners. All rights
reserved.
5
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:518
TEAC CUSTOMER SUPPOR T HOTLINE (TCS)
1300 553 315
Between Monday to Friday - EST 9AM to 6PM
Teac PCD806 (AUST)(TSB IC)-1.p65 2011/5/25, ¤W¤È 11:519
Loading...