Teac CTH340 Owner's Manual

CTH340
OWNER S MANUAL
IMPORTANT
WARRANTY INFORMATION INSIDE. PLEASE READ
COLOUR TELEVISION
TV/AV
ALT.
VOL-
CH-
CH+
MENU
0
9
8
7
3
2
1
-/--
MUTE
STANDBY
SYS
P.MODE
PIC.
6
5
4
CALL
WARRANTY REGISTRATION
Please read this warranty card.
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
Warranty Terms & Conditions
1. TEAC warrants to the original retail purchaser only, that this product is free from defects in material and
workmanship under normal domestic use and authorises free service during the warranty period at any TEAC Authorised Centre only. TEAC warranty only applies to products purchased, used and serviced in Australia .
2. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty Periods
Table from the date of purchase.
3. All parts, except the external cabinet, are warranted as specified in Warranty Periods Table, and will be repaired or
replaced at the sole judgement of TEAC.
4. Normal customer maintenance as described in the owner’s manual is not covered by this warranty (such as cleaning
VCR heads etc.)
5. This warranty does not apply to equipment showing abuse, damage or that it may have been tampered with, altered
or repaired outside any TEAC Authorised Service Centre. If so, the warranty will be void.
*Your nearest Authorised TEAC Service Centre is listed in your Owners Manual
6. In the event that this unit or any defective parts must be returned to TEAC Service Centres, a copy of this warranty
certificate and of your purchase receipt must be enclosed to be a valid warranty. Such equipment or parts must be sent freight prepaid to the nearest authorised TEAC Service Centre. After the repair, the unit will be available for collection by the owner or it will be returned to the owner. The warranty does not cover freight or insurance. In all cases of in-transit damages or loss, a claim must be filed against the carrier by the purchaser.
7. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with
the sale of any equipment other than as stated in this warranty and outlined above.
8. In no event will TEAC be responsible or liable for indirect or consequential damages from interrupted operations or
other causes.
9. Warranty is not transferable to any subsequent purchaser if the product is sold during the warranty period,
HISENSE PRODUCT
WARRANTY PERIOD
Televisions / Plasma 106 cm and above
1 Year
LCD televisions 56cm and above 1 Year Televisions – 51cm and above 1 Year Televisions under 51 cm 1 Year Digital Set Top Boxes 1 Year VCR 1 Year DVD 1 Year Audio Systems 1 Year
WARRANTY PROCEDURES
Please keep this information for your own records.
Please refer to the owner’s manual to ensure that you have followed the correct installation and operating procedures.
1. Read owner’s manual carefully
2. If you require Warranty Service, please contact the TEAC Service Centre
3. Please have your purchase receipt as your proof of purchase and the following details completed for a valid
Warranty.
Owner’s Name
Owner’s Address
Postcode
Model Name/No. Serial No.
Dealer’s Name
Dealer’s Address
Postcode
4. Please ensure that your product is packed appropriately upon return to the service centre.
If you have any other queries regarding service or warranty please contact the TEAC Service below:
info@teac.com.au
www.teac.com.au
CONTENTS
WELCOME TO THE BRIGHT, VIVID AND JOYFUL COLOR WORLD
Dear customer,
Thank you for your purchasing this color TV and we wish you many years of viewing pleasure with your new TV.Before operating the set, please read this manual carefully and keep it handy for future reference.
High voltage inside. To prevent the risk of electric shock ,do not remove the cover. No user -serviceable parts inside. Refer servicing to qualified service personnel . Do not obstruct ventilation slots in back or base of receiver.
Don't expose the unit in rain or moisture.
Don't put
water (or any other kind of liquid)-containing vessel on the set to avoid causing fire.
Before storming, please unplug the antenna and the power supply from their sockets.
This is an IEC safety class II (reinforced insulation) product and does not need grounding for safety.
SAFETY CLASS
NOTICE
Knowing Your Television Set...........................................3
....................................................5
..............................................................8
...................................
.............................8
Troubleshooting.................................................................1
Installation......................................................................2
........................................ ...4
.......................................6
.............
.......
...................................7
.....................................
..................
....7
Maintenance And Safety Information.............................1
To connect with terrestrial signal source................2
To prepare remote control ......................................2
Front controls...........................................................3
.....................................................
3
...............................
..............................
....7
Basic operation
....... .............................5
Power/Standby on/off
....... ..............................5
Selecting the program
....... ..............................5
Adjusting the volume
....... ......................6
Selecting the signal source
....... ....................................
6
Alternating
.......................
6
Calling up on screen display
....... .............................
6
Muting the sound
Selecting the picture mode
Option1 menu
Clock menu
Picture menu
Option2 menu Preset menu
........ ........
....
............
10
Specifications
..
...............
..............
9
Connecting with the audiovisual equipments
........ ....
....
...........
Rear view
Remote control handset
Please read these instructions carefully and do accordingly.
TV set requires adequate ventilation. If you place the set near walls, leave sufficient space (15cm) on all sides so that the air can circulate freely. The ventilation slots at the rear of the set can not be covered by curtains, newspapers or any other similar objects. Do not expose the TV set to direct sunlight or place it near radiator and other similar sources of heat.
TV sets are intended for use in dry rooms. If you wish to use it occasionally outdoors, be sure to protect it against any kind of moisture (rain,splashes, dew and etc.).
Do not put metal and combustibles into the TV through the rear slots to avoid possible fire or shock hazard. Do not place water(or any other kind of liquid)-containing vessel on the set. Do not step on or twist the power cord. A damaged cord may cause fire or shock hazard. Keep any magnetic object away from the TV as far as possible. If there is a lightning storm coming, unplug the TV set and the outdoor antenna. If any abnormal phenomenon
(smoke, unusual sound, or strange smell), stop using the TV at once. Power
it
off and unplug it.
Maintenance And Safety Information
1
occurs
Troubleshootin g
Before calling the service personnel, please check the list below to fix some simple problems not caused by the unit itself.
Check these things
Be sure the power cord is plugged in. The sound volume is adjusted to the minimal or in mute position.
May be pulse interference from nearby cars, motorcycles, electric trains, high tension lines, neon signs, hair dryers, etc.
May be radio interference form nearby TV receivers, personal computers, and TV games, or radio station.
May be due to broadcast waves reflected from nearby mounts and high buildings. Check if the direction of aerial has been deflected because of strong wind, etc. The aerial lead-in may be broken or disconnected.
Check if the direction of aerial has been deflected because of strong wind, etc.
Clean indicator window. The batteries maybe have worn out. The batteries may be improperly installed.
Symptom
No picture. No sound. Normal picture. No sound. Poor color, contrast, tint
Spots on screen
Lines on screen
Double/triple image
Snowy picture
Reduction in operating distance
Remote control does not work
May need to adjust contrast, color and tint. Also try fine tuning the stations. (Ref to page 7)
Try re-tuning in stations.
Can be caused by magnetic interference. Ensure to unplug the TV Set from the power point for approximately 8-10 hours.
Green/Purple spots
Loading...
+ 10 hidden pages