Teac CD-01U Quick Start
1
Basic playback
1. Press the POWER switch to turn on the unit.
2. Insert a disc to the disc slot.
3. Press the ¥/π key on the front panel or
¥PLAY key on the remote control unit.
The unit starts playback from track 1.
• To pause playback
Press the ¥/π key on the front panel or
π
READY key on the remote control unit.
• To stop playback
Press the ·key on the front panel or
·STOP key on the remote control unit.
• To eject the disc
Press the EJECT key on the front panel or
remote control unit.
Selecting a track
From the front panel, use the SKIP keys.
From the remote control unit, use the SKIP keys
or the numeric keys.
To select a track using the numeric keys, specify
the desired track number in two digits for an
audio CD or in three digits for an MP3 disc. To
specify track 4 of an audio CD, for example,
press
0
followed by 4 .
Searching the desired position
During playback (or paused), use the SEARCH
keys to move forwards or backwards while
monitoring the cueing sound.
Also, frame accurate jog search is possible by
pressing the
SHIFT key to turn on the indicator
and rotating the PITCH dial on the front panel, or
using the JOG (-,+) keys on the remote control
unit.
About the shift mode
Many of the front panel controls have shifted
(secondary) functions. You can use these
functions when the SHIFT indicator is lit (i.e. in
the shift mode).
Pressing the SHIFT key switches on or off of the
SHIFT indicator. Note that the illuminated SHIFT
indicator does not turn off until you press the
SHIFT key again.
Playback mode
The unit has four playback modes: normal
(continuous), single, program and random.
By pressing the
PLAY MODE key on the remote
control unit, you can select the desired playback
mode.
You can also select the playback mode using the
front panel CALL (PLAY MODE) key while the
SHIFT indicator is lit.
The currently selected mode is shown on the
display.
• Normal mode : no indication
• Single mode : S
• Program mode: PROGRAM
• Random mode: RANDOM
*
This quick start guide is written assuming that
the unit is in the normal playback mode except
as noted.
Playing back MP3 files
The unit can play back a disc containing MP3
files.
Note that some functions (such as A-B loop,
search, EOM, etc.) do not work with an MP3 file.
This Quick Start Guide describes the basic operations of the CD-01U CD player.
CD-01U/Professional Quick Start Guide
»
Playable discs
The CD-01U can play back not only commercially available audio CD discs but also CD-R and CD-RW
discs. In addition, it can play back MP3 files on a CD-R/CD-RW disc.
2
Menu operation
You can make the following settings via the
menu system.
• Key original function on/off
• Eject block function on/off
• Repeat setting
• Program setting
• Fade in/fade out setting
• Relay function setting
• Timer play on/off
• Mono output on/off
• Resume function on/off
• EOM time setting
• Incremental play function on/off
• Pitch step setting
• RS232C baud rate
• Factory preset
• User data on/off
Basic menu operation
1. Enter the menu mode by:
• pressing the PITCH dial on the front panel
while SHIFT indicator is lit, or
• pressing the MENU key on the remote
control unit.
2. Select the desired menu item by:
• rotating the
PITCH dial and pressing the
PITCH dial to confirm the selection, or
• using the PREV/NEXT keys or numeric
keys, and pressing the ENTER key to
confirm theselection.
3. Select the desired option by:
• rotating the
PITCH dial, and pressing the
PITCH dial to confirm the selection, or
• using the PREV/NEXT keys or numeric
keys, and pressing the ENTER key to
confirm the selection.
After confirming the selection, the unit automatically exits the menu mode.
Note that some menu items need different
procedures.
Various functions
In the following description, most operations
are carried out using the remote control unit,
though you may carry out them also from the
front panel.
Auto cue
When the auto cue function is enabled, the
selected track pauses at the beginning of the
audio on the track so that you can start the
music immediately after pressing the ¥key.
Auto ready
When the auto ready function is enabled, after
each track is played back, the unit automatically
pauses at the beginning of the next track.
By pressing A.RDY/INS key, you can switch
on/off of the auto ready function.
Call function
If you press the CALL key, the unit returns to the
positon where playback started last time and
pauses.
Incremental play
When the incremental play function is enabled,
pressing the ¥key during playback starts
playback of the next track, while pressing the
·key during playback skips to the next track
and pauses.
You can enable or disable the incremental play
function using the INCR menu item (menu 11).
Repeat playback
When the repeat playback function is enabled,
the unit repeats playback until you stop. The
repeated area depends on the current playback
mode (for example, if SINGLE mode is
selected, the unit repeats the current track).
You can enable or disable the repeat function by
Memo
Loading...