TCL 65C825, 55C825 User guide

Page 1
Important information
Safety
Ensure that your domestic mains supply voltage
matches the voltage indicated on the identication
sticker located at the back of your set. Where the mains plug, AC inlet or an appliance coupler is used as disconnect device, it shall remain readily operable.
On certain models, the light indicator is located at the side of the TV set. The absence of a light indication at the front does not mean that the TV set is fully disconnected from the mains. To disconnect the TV set completely, the mains plug must be pulled out.
The TV set’s components are sensitive to heat. The
maximum ambient temperature 35º
Celsius. Do not cover the vents at the back or
sides of the TV set. Leave su󰀩cient space around it to
allow adequate ventilation. Install the appliance away
from any source of heat (replace, etc.) or appliances creating strong magnetic or electric elds.
Moisture
not exceed place to a warm one can cause condensation on the
screen (and on some components inside the TV set).
Let the condensation evaporate before switching the TV set on again.
The button on the remote control can be used to switch it on and put it into standby mode. If you are not going to be watching the TV for a lengthy period of time,
switch it o󰀨 completely by removing the plug from the
mains power socket.
During disconnect the TV set from the mains and aerial so
that it is not a󰀨ected by electrical or electromagnetic
surges that could damage it. For this reason, keep the
mains and aerial sockets disconnected
Unplug
o󰀨 a
under any circumstances, open the TV set yourself, as you run the risk of an
WARNINGS
This appliance is intended for domestic household use only and should not be used for any other application, such as for non-domestic use or in a commercial environment.
If the external exible cable or cord of this product is
damaged, it shall be replaced by the manufacturer or
his service agent or a similar qualied person in order
to avoid a hazard.
Leave more than 10cm clearance around the television to allow adequate ventilation. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers,
in rooms where the set is installed should
75%
humidity. Moving the set from a cold
or POWER/ button on the TV set or the
thunderstorms
the TV set immediately if you notice it giving
smell of burning
, we recommend that you
, if necessary.
or
should not exceed
accessible so they can be
smoke
. You must never,
electric shock
in doing so.
table-cloths, curtains, etc.
The apparatus shall not be exposed to dripping or
splashing and no objects lled with liquids, such as
vases shall be placed on the apparatus.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, re
or the like.
To reduce the risk of re or electric shock, do not
expose this apparatus to rain or moisture.
A television set may fall, causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
• ALWAYS use cabinets or stands or mounting methods recommended by the manufacturer of the television set.
• ALWAYS use furniture that can safely support the television set.
• ALWAYS ensure the television set is not overhanging the edge of the supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the television set or its controls.
• ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
• NEVER place a television set in an unstable location.
• NEVER place the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television set to a suitable support.
• NEVER place the television set on cloth or other materials that may be located between the television set and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.
If the existing television set is going to be retained and relocated, the same considerations as above should be applied.
Equipment with this symbol is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. Equipment without this symbol is a Class I electrical appliance. It shall be connected to a mains socket outlet with a protective earthing connection.
To prevent the spread of re, keep candles or other open ames away from this product
at all times.
English
EN
1
Page 2
N
Important information
English
This symbol indicates that high voltage is present inside. It is dangerous to make any kind of contact with any internal part of this product.
This symbol indicates that the fuse may be in the neutral, and that the mains shall be disconnected to de-energize the phase conductors.
To prevent injury, this apparatus must be securely
attached to the oor/wall in accordance with the
installation instructions.
To reduce the risk of RF exposure, the use distance of this apparatus should be at least 100cm.
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded by a skilled person so as to provide some protection against voltage surges and built-up static charges.
TV screen
The TV screen used in this product is made of glass. Therefore, it can break when the product is dropped or impacted upon by other objects.
The TV screen is a very high technology product,
giving you nely detailed pictures. Occasionally, a few nonactive pixels may appear on the screen as a xed point of blue, green or red. This does not a󰀨ect the
performance of your product.
Care
Use a glass-cleaning product to clean the screen and a soft cloth and mild detergent to clean the rest of the set.
Important: Using strong detergents, alcohol-based and abrasive products may damage the screen.
Dust the vents at the back and sides regularly. Using solvents, abrasive or alcohol-based products could damage the TV set. If an object or liquid enters the appliance, unplug it immediately and have it checked by an authorized engineer. Never open the appliance yourself since this may put you at risk or damage the appliance.
ESD regulation
This apparatus meets ESD performance criteria. In case the apparatus does not recover in Ethernet connection mode or USB playing mode due to electrostatic discharge, user intervention is required.
Bluetooth function notice
Bluetooth® technology (if available in your TV) uses 2.4GHz frequency thus close proximity to Wi­Fi access points, routers or microwave ovens might interfere with Bluetooth audio streaming. If you face
interruptions in audio reception, you should restart
your Bluetooth device to nd frequency with less
interferences and if you continue to face issues you should move closer to TV or increase space between TV and source of interferences.
Bluetooth declaration ID: D043135
Hanging the TV set on the wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following safety notes:
• Check that the wall can support the weight of the TV set and wall mount assembly.
• Follow the mounting instructions provided with the wall mount. For certain models, make sure to screw the hexagonal VESA wall mounting screw bosses
(and screws) provided with the set into the nuts for
the wall mount at the back of your set before your wall mounting.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the material of the wall.
• Make sure that the TV set cables are placed so that there is no danger of tripping over them.
All other safety instructions about our TV sets are also applicable here.
Multi product user manual
The features described in this manual are common to most models. Some features may not be available on
your TV and/or your TV may include features that are
not described in this user manual. The illustrations in
this manual may di󰀨er from the actual product. Please
refer to the actual product.
Device update
Typically, some devices are updated quarterly, but not
always so specic. Some devices, especially those
that went on sale more than three years ago, will only
be updated if a critical vulnerability is found and xed.
EN
2
Page 3
Products
Battery
Notice:
The sign Pb
below the symbol for batteries indicates that this battery contains lead.
Important information
Information for Users on Disposal of Old Equipment and Batteries
[European Union]
These symbols indicate that the electrical and electronic equipment and the battery with this symbol should not be disposed of as general household waste at their end-of-life. Instead, the products should be handed over to the applicable collection points for the recycling of electrical and electronic equipment as well as batteries for proper treatment, recovery and recycling in
accordance with your national legislation and the Directive 2012/19/EU, 2006/66/EC and 2008/12/
EC.
By disposing of these products correctly, you will help to conserve natural resources and will help
to prevent potential negative e󰀨ects on the environment and human health which could otherwise
be caused by inappropriate waste handling of these products.
For more information about collection points and recycling of these products, please contact your
local municipal o󰀩ce, your household waste disposal service or the shop where you purchased
the product.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national
legislation.
[Business users]
If you wish to dispose of this product, please contact your supplier and check the terms and conditions of the purchase contract.
[Other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to dispose of these items, please do so in accordance with applicable national legislation or other rules in your country for the treatment of old electrical equipment and batteries.
English
Dear Customer,
Hereby, TCL declares that this device is in compliance with Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address: www.tcl.com
The EU declaration of conformity can be downloaded directly at www.tcl.eu/eu/doc/XXXXXXXX * * Please replace «XXXXXXXX» by the exact model name.
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance. Product design and specications may be changed without notice.
EN
3
Page 4
Contents
English
Important information ………………………………… 1
Chapter 1 - Connections
Connect the power and antenna …………………… 5
Connect Blu-ray Disc player, HD game console, HD camcorder, headphones, CI module ………………… 5
Connect to the Internet ……………………………… 6
Chapter 2 - Getting started
Remote control functions …………………………… 7
Installing batteries …………………………………… 7
Exclusive remote control ……………………………… 8
Installing batteries …………………………………… 8
Switch the TV on and o󰀨 ……………………………… 9
Initial setup …………………………………………… 9
Chapter 3 - Basic TV operations
Accessing channels ………………………………… 10
Watching connected devices ……………………… 10
Adjusting volume …………………………………… 10
Accessing Android TV homepage ………………… 10
Using TV settings menu …………………………… 10
Chapter 4 - Using more of your TV
Installing channels ………………………………… 11
Common interface ………………………………… 11
Using the common interface module …………… 11
Accessing common interface services ………… 11
Using subtitles ……………………………………… 11
Turning on/o󰀨 subtitles …………………………… 11
Enabling subtitle languages on digital TV channels …………………………………………… 11
Selecting a subtitle type on digital TV channels 11
Using Teletext ……………………………………… 12
Selecting decoding page language …………… 12
Digital Teletext language ………………………… 12
Consumer Electronic Control (CEC) ……………… 12
Enabling or disabling CEC ……………………… 12
Using Auto power on ……………………………… 12
Using Auto standby ……………………………… 12
HbbTV ……………………………………………… 12
HbbTV access …………………………………… 12
HbbTV deactivation ……………………………… 12
Using EPG (Electronic Programme Guide) ……… 13
Bluetooth function…………………………………… 13
Quick start function ………………………………… 13
Networked waking up ……………………………… 13
Reset to factory default settings…………………… 13
Using the hands-free TV voice control …………… 14
Multi visual …………………………………………… 14
Chapter 5 - Other information
Password in Parental Control ……………………… 15
Troubleshooting …………………………………… 15
EN
4
Page 5
Chapter 1 - Connections
(Optical)
Digital
audio out
USB 2.0
5V 0.5A
MAX
LAN
(Service port)
HDMI 1 (4K@120Hz) HDMI 2 (4K@120Hz)
eARC/ARC
Antenna/Cable input
Satellite input
13/18V 0.4A
MAX
AV adapter
Common interface
HDMI 3 (4K@60Hz) HDMI 4 (4K@ 60Hz)
Connect the power and antenna
To switch on TV after connecting power cord, press
Notes:
- Position of power socket varies according to TV model.
- Disconnect the power cord before connecting devices.
Connect Blu-ray Disc player, HD game console, HD camcorder, headphones, CI module
or POWER/ .
Cable
English
HD game console
Blu-ray Disc player
HD Camcorder
EN
5
Page 6
Connections
English
Connect to the Internet
Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network.
The connection method may be different depending on your actual network conguration. If you have any questions about your home network, please refer to your Internet service provider.
Wired connection
Router
Modem Internet
LAN port
Wireless connection
Modem Internet
Wireless router
Network settings:
1.
2. Press /// to move the cursor to on the right top of the screen and press OK to enter the Settings
3.
on the remote control to display the Android TV homepage.
Press
menu.
Press ▲/▼ to select
guidance to set up your network.
Network & Internet
, press OK to enter the submenu and follow the on-screen
Notes:
-Your TV might not have all connectors visible on diagram above. Number of USB and HDMI ports may vary
according to TV model.
-Button and connector locations may vary according to TV model.
-USB connectors are for data input from USB drives and for connecting other relevant USB devices where
applicable.
-All USB devices have to be directly connected to TV set without cable extenders. In case extender is
required, maximum 50cm length is recommended. Longer extenders should have ferrite beads.
-ARC (Audio Return Channel) function is only supported on the HDMI port identied with ARC. To use ARC
function, please turn on CEC function rst as described in the
-It is recommended to use high quality and well shielded HDMI cables to avoid possible interferences.
-Please use headphones with 3.5mm TRS connector. Excessive sound pressure from headphones can cause hearing loss.
EN
CEC
section.
6
Page 7
Chapter 2 - Getting started
Remote control functions
Most of your television's functions are available via the menus that appear on the screen. The remote control
supplied with your set can be used to navigate through the menus and to congure all the general settings.
To switch the sound o󰀨 and back on. Standby / quit standby.
Numeric buttons To enter channel numbers or a digit.
To access T-Channel.
LIST
To display the channel list. To control the volume.
/
To display programme information, if available. To display the TV settings menu.
P /
▲/▼/◄/
GUIDE
Colour buttons
ZOOM To select the screen mode.
NETFLIX To access Netix if available.
prime video
To change channels. To access the Android TV homepage. To display the Option menu.
Navigation direction buttons.
OK
To conrm an entry or selection.
To return to the previous menu or quit an App. To select input source.
EXIT To exit the on-screen menu.
LANG To select an audio language available for selected digital TV
programme.
To toggle the Electronic Programme Guide on or o󰀨 (only available for digital channels).
TEXT To toggle Teletext on or o󰀨.
SUBT.
To select a subtitle language available for selected digital TV programme.
To select tasks or Teletext pages; to be used for HbbTV function.
To start fast reverse. To pause playback. To start fast forward.
Note: You are recommended to use the full screen mode.
Do not use the display mode with black bars on both sides of the picture (such as 4:3) for a long time; otherwise the TV screen may be damaged permanently.
To start playback. To stop playback.
To access Prime video if available.
English
Installing batteries
1.
Push to open the back cover as
illustrated.
2.
Insert two AAA batteries according to the polarities marked on the batteries case.
3. Replace the back cover as illustrated.
Note: The remote control type may be changed without notice.
EN
7
Page 8
English
Exclusive remote control
Getting started
Standby / quit standby.
To display the TV Settings menu. To access the Android TV homepage. To display the Option menu.
▲/▼/◄/► Navigation direction buttons.
OK To conrm an entry or selection.
To return to the previous menu or quit an App. To select input source.
Press the
to the Google Assistant.
connection is normal.)
To pop up the virtual remote control keyboard when available.
To control the volume.
/
/
P
To change channels.
NETFLIX To access Netix if available.
To access T-Channel.
Notes:
- This remote control is available only for selected models. The remote control
type may be changed without notice.
-Follow the on-screen guide to pair the remote control with the TV when pressing the
-Google and Android TV are trademarks of Google LLC.
-The Google Assistant is not available in certain languages and countries.
Google Assistant
Google Assistant
(Available only when the network
button for the rst time.
button on your remote to talk
Installing batteries
1.
Push to open the back cover as illustrated.
2. Insert two AAA batteries according to the polarities marked on the battery case.
3.
Replace the back cover as illustrated.
EN
8
Page 9
Getting started
Important
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Remove batteries when the remote control is not to be used for a long time. Batteries left in equipment may cause damage through deterioration and corrosive leakage, invalidating the guarantee.
To protect the environment use local recycling facilities for battery disposal. Dispose of used batteries according to the instructions.
CAUTION: Risk of explosion if batteries are replaced by an incorrect type. Replace only with the same or equivalent type recommended by the equipment manufacturer.
If the batteries in your remote control are run down, you can use the button on your TV set.
You can turn on the TV from standby mode by pressing the
While the TV is on, the multi-function menu appears by pressing the information about how to use the multi-function menu, please refer to the figure below.
Press the button to move the highlight to the next function selection.
Press and hold the button for more than 2 seconds to confirm your selection.
Note: Please refer to the Quick Start Guide to nd the button on your TV set.
:
button on your TV set.
button on your TV set. For more
Switch the TV on and off
1.
When the power cord is connected, the TV will be turned on directly or be in standby mode. If the TV is in standby mode, press the on.
2.
To put the TV into standby mode, press the but with low energy consumption.
3. To switch the TV o󰀨, unplug the mains plug from the mains outlet.
POWER/
or
button on the set or the button on the remote control to turn it
button on the remote control. The TV set remains powered up,
English
Initial setup
The rst time you switch the set on, the process. Follow the on-screen instructions to nish the initial setup process such as selecting the language,
connecting to the network, scanning channels, and more. During each step, either make a choice or skip the step. If you skip a step, you can perform the setup later from the settings menu.
Note: If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of or poor broadcasting in some areas.
Welcome
screen appears, which guides you through the initial setup
EN
9
Page 10
Chapter 3 - Basic TV operations
English
Accessing channels
Using the numeric buttons: press the corresponding
numeric buttons on the remote control to access the channels.
Using the P
on the remote control to scroll through the channels.
Using the LIST button
remote control to display the channel list and press
///
/ buttons
and OK to select channels.
: press the
: press the
P /
LIST
button on the
Watching connected devices
Press list. Press
and press OK to conrm.
on the remote control to display the source
/
to select TV or other input sources
Adjusting volume
Volume control: press the / buttons on the
remote control to increase or decrease the volume.
Sound mute
the sound. Press this button again or the
to restore the sound.
: press the
button to temporarily mute
Accessing Android TV homepage
Allows you to enjoy Internet Applications (Apps) and
specially adapted Internet websites, and perform system settings for your TV. You can make controlling with the TV remote control.
WARNING:
Congure the network settings before using Smart
TV applications.
Slow responses and/or interruptions may occur,
depending on your network conditions.
• If you experience a problem using an application,
please contact the content provider.
• According to circumstances of the content provider,
an application’s updates or the application itself may be discontinued.
• Depending on your country's regulations, some
applications may have limited service or not be supported.
• Changes in application content may be made
without prior notice by the service provider.
1. Press
2.
3.
on the remote control to display the
Android TV homepage.
///
Press
Apps, functions or settings.
Press
Note: Since the connection with Internet takes
time, it’s recommended that you wait a few minutes to use the Smart TV feature after activation of TV from standby.
and OK to enter the desired
to return to the homepage.
buttons
button
Using TV settings menu
Allows you to adjust TV settings, such as picture and sound.
1.
2.
3. In submenus, press / to select menu options,
4.
5.
Press
settings menu.
Press
OK/
then press OK/ to enter the option list, the adjustment interface, or the corresponding submenu.
Press Press
Notes:
on the remote control to display the TV
/
to select the desired item, then press
to enter the corresponding submenu.
to return to the previous menu.
EXIT
or
to close the menu.
-You can also press on the remote control,
TV settings
select
enter the TV settings menu. Some options may not be available for certain signal sources.
LED motion clear
-Setting
moving images clearer by controlling the LED backlight, but the picture will be darker and more ickering than with
(if available) and press OK to
on will make fast
LED motion clear
off.
EN
10
Page 11
Chapter 4 - Using more of your TV
Installing channels
This section describes how to search and store channels automatically. This may be done in any of the cases below:
- you have skipped the channel installation step in the initial setup;
- you are prompted that there are no channels in TV mode;
- you want to update your channels.
1.
In TV mode, press
Channel > Channel scan
select enter.
2. The TV installs and arranges channels according
to your country or region. Press ▲/ to select Country/Region, and press OK/ to enter. Enter
the default password 1234 or your own password in case you have changed the password in the System > Lock menu. Press /▼ to select your country or region and press OK to conrm.
3.
4.
5. Press / to select other options to congure.
6.
7.
/
Press
OK/
Press
/
(Note: models.)
After conguration is completed, press ▼ to select
Search
The channel search may take a few minutes. After the automatic search, channels are arranged in a preset order. If you want to edit the channel list, press
Channel organizer
to select
to enter.
/
to select
to select
Satellite
and press OK to start scanning channels.
on the remote control, select
Common interface
Encrypted digital TV channels can be decoded with a common interface module and a card provided by a digital TV service operator.
The common interface module may enable several digital services, depending on the operator and
services you choose (for example, pay TV). Contact
your digital TV service operator for more information about services and terms.
Using the common interface module
WARNING: Switch off your TV before inserting a common interface module. Be sure to follow the instructions described below. Wrong insertion of a common interface module may damage both the module and your TV.
1.
Following the directions printed on the common interface module, gently insert the module into the common interface slot on the TV.
on the remote control and
Automatic search
Tuner mode
Cable, Antenna
option is available only in selected
and press
or
OK/
. Press
and press
and press
Satellite
Channel >
to enter.
OK/
.
to
2.
Push the module in as far as it will go.
3.
Turn on the TV and wait for the common interface function to be activated. This may take several minutes.
Note: Do not remove the common interface
module from the slot. Removing the module
will deactivate the digital services.
Accessing common interface services
After inserting and activating the common interface module, press
Channel > Common interface
enter. This menu option is only available if the common
interface module is correctly inserted and activated. On-screen applications and content are provided by your digital TV service operator.
on the remote control, select
and press
OK/
to
Using subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcast via Teletext or DVB-T/DVB-C/
DVB-S digital broadcasts. With digital broadcasts, you have the additional option of selecting a preferred subtitle language.
Turning on/off subtitles
1.
2.
3. Press EXIT or
Enabling subtitle languages on digital TV channels
1.
2.
3. Press / to select Digital subtitle language
4.
5.
Shortcut operation:
control to directly select a subtitle language available for the selected digital TV programme.
Selecting a subtitle type on digital TV channels
1.
2. Press / to select a subtitle type and press OK
Press
Subtitle
Select the
between on or o󰀨.
Press
Subtitle > Digital subtitle language 1st
press
Press
preferred language and press OK to conrm.
2nd and press OK/► to enter.
Press
and press OK to conrm.
Press
Press
Subtitle > Subtitle type
to conrm. You can select Hearing impaired to
on the remote control, select
and press
on the remote control, select
OK/
/
/
EXIT
on the remote control, select
OK/
to enter.
Subtitle
option, and press OK to toggle
to close the menu.
to enter.
to select a subtitle language as your
to select a secondary subtitle language
or
to close the menu.
SUBT.
Press
and press
Channel >
Channel >
and
on the remote
Channel >
OK/
to enter.
English
EN
11
Page 12
Using more of your TV
English
display the hearing impaired subtitles with your selected language.
3.
Press
EXIT
or
to close the menu.
Using Teletext
Selecting decoding page language
1. Press
2.
3.
on the remote control, select Channel > Teletext > Decoding page language and press OK/ to enter.
/
Press
in which Teletext will display and press OK to
conrm. Press
to select a proper type of language
EXIT
or
to close the menu.
Digital Teletext language
On digital TV channels, depending on the broadcaster, you may be able to enjoy a service with
multiple initial Teletext pages in di󰀨erent languages.
This function allows you to select an available language as primary language, which relates to
di󰀨erent initial Teletext pages.
1.
2.
3.
Press
Teletext > Digital teletext language OK/
Press conrm.
Press
on the remote control, select
to enter.
/
to select a language and press OK to
EXIT
or
to close the menu.
Channel >
and press
Consumer Electronic Control (CEC)
Use this function to search for CEC devices connected to the HDMI sockets in your TV and enable one-touch play and one-touch standby between CEC devices.
Enabling or disabling CEC
1.
1. Select the HDMI Control option, and press OK to
2.
Press
Consumer Electronic Control (CEC) OK/
toggle between on or o󰀨. Press
on the remote control, select
to enter.
EXIT
or
to close the menu.
Using Auto power on
Enables the TV to automatically power on when you
power on a CEC device (e.g. DVD) with the device’s remote. Press OK to turn it on to enable this function.
Using Auto standby
Enables all CEC devices to automatically go to the
standby mode when you turn o󰀨 the TV with the TV remote. Press OK to turn it on to enable this function.
Note: The CEC functions depend on the devices
connected and it is possible that some devices may not interoperate correctly when
System >
and press
connected to this TV. The user manual or the manufacturer of the problematic devices should be consulted for further information.
HbbTV
HbbTV (Hybrid broadcast broadband TV) is a service o󰀨ered by certain broadcasters and available only on
some digital TV channels. HbbTV delivers interactive television over broadband Internet. These interactive features are added to and enrich the normal digital programmes, and include services such as digital teletext, electronic programme guide, games, voting,
specic information related to the current programme,
interactive advertising, information magazines, catch­up TV, etc.
To use HbbTV please ensure your TV is connected to Internet and HbbTV is switched on.
Notes:
-HbbTV services are broadcast- or country-
dependent and may be unavailable in your area.
-You cannot download les to your TV with
HbbTV function.
- Application provider or broadcasting related
conditions may cause an HbbTV application to be unavailable momentarily.
-To access HbbTV applications you must connect
your TV to the Internet via a broadband link. HbbTV applications may not work correctly in case of network related issues.
HbbTV access
1. Press
2.
3.
4. Use /// and the colour buttons to navigate
HbbTV deactivation
To avoid disturbances that may be caused by HbbTV
broadcasting tests, you can turn o󰀨 the HbbTV
function:
1. Press
2.
on the remote control, select System >
HbbTV settings and press OK/ to enter.
Select the on.
When you tune to a digital TV channel that o󰀨ers
HbbTV, this will be signalled to you by an on­screen indication (generally a red button, but
other colour buttons may also be used). Press
the indicated colour button to open the interactive pages.
through the HbbTV pages and press OK to
conrm.
HbbTV settings and press OK/► to enter.
Select the
o󰀨 to disable it.
HbbTV
option, and press OK to turn it
on the remote control, select System >
HbbTV
option, and press OK to turn it
EN
12
Page 13
Using more of your TV
Using EPG (Electronic Programme Guide)
EPG is an on-screen guide that displays scheduled
digital TV programmes. You can navigate, select and view programmes.
1.
2. Use the related buttons shown at the bottom of the
3. Press GUIDE or EXIT to exit EPG.
GUIDE
Press
Programme Guide
allows you to get information about the current or next programme playing on each channel.
Navigate through the di󰀨erent programmes using
///
the
screen to view EPG.
-Watch now
selected channel or view more information about the selected programme.
-Programme lter
lter for digital TV programmes.
- Custom schedule: Press the red button to set a schedule.
-Select date
date.
-Schedule list
your schedule list.
on the remote control, the
menu will appear, which
buttons on the remote control.
More
or
: Press OK to watch the
Press
:
: Press the green button to select
: Press the yellow button to view
to display programme
Bluetooth function
(* not available for some models)
Bluetooth® is a wireless technology standard for exchanging data over short distance between Bluetooth devices. You can connect Bluetooth audio device, mouse or keyboard via the TV.
1. Press
2.
The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any
on the remote control, press ▲/▼/◄/►
to move the cursor to on the right top of the screen and press OK to enter.
Remotes & Accessories > Add accessory
Select and press OK to enter. The TV will search nearby Bluetooth devices automatically. Select an available device, press OK and follow the guides on the screen to connect it.
Note: Bluetooth technology (if available in your TV)
uses 2.4GHz frequency thus close proximity to Wi-Fi access points, routers or microwave ovens might interfere with Bluetooth audio streaming. If you face interruptions in
audio reception, you should restart your
Bluetooth device to nd frequency with less
interferences and if you continue to face
issues you should move closer to TV or increase space between TV and source of
interferences.
use of such marks by TCL is under license. Other trademarks and trade names are those of their respective owners.
Quick start function
It enables you to turn on your TV faster from standby
mode than turning this function o󰀨, but it will also
increase standby power consumption.
1. Press
2.
on the remote control, select > Device Preferences > Quick start > Enable quick start and press OK to toggle between on and o󰀨
Press
to return to the previous menu.
Networked waking up
This function allows you to turn on your TV from standby mode via a network. To use this function, please make sure:
1. Your TV is connected to an e󰀨ective wireless home
network;
2.
The desired controller, such as a smartphone, is connected to the same wireless network as your TV;
3.
An App which supports networked waking up function, such as Youtube, has been installed into
the controller;
4. Networked standby is turned on in the Network
& Internet menu from the homepage.
When the TV is in networked standby mode, you can use the App to wake up the TV remotely.
Notes:
-This feature is disabled if you press and hold the
button on the remote control and conrm to
shut the TV down.
-Before using the feature of networked waking up,
make sure the Quick start function is enabled.
-This function may not be available for certain models.
Reset to factory default settings
Allows you to reset the TV to factory default settings.
1. Press
2.
3.
4. The Welcome screen appears. Follow the
on the remote control, select > Device Preferences > Factory reset > Factory data reset > Erase everything and press OK to
conrm.
Use the numeric buttons on the remote control to enter the password 1234 or your own password in case you have changed it.
Select OK and press OK to conrm.
instructions in the section Initial setup.
English
.
EN
13
Page 14
Using more of your TV
English
Using the hands-free TV voice control
Before using the hands-free TV voice control, connect the TV to the network and make sure it can access
the Google website rst. Then follow the steps below
to access.
1.
Turn the built-in MIC switch (Please refer to the Quick Start Guide to nd the MIC switch on your TV set) to on before using this function.
2.
Access the Android TV homepage by pressing on the remote control.
3. Select > General Settings > Device Preferences > Google Assistant, select On
and press OK to enter. Follow the on-screen instructions to complete the progress.
4.
Say "OK Google" to activate it.
Notes:
-This hands-free TV voice control is only available for selected models. For details, please refer to your local dealer.
-A quiet surrounding is required for better function
when using it. The recommended distance for using the hands-free TV voice control is within 2
meters in front of it.
-Turn the built-in MIC switch to off if you are not going to use it.
- It is recommended to turn off Google Assistant to
avoid interference when there is more than one
terminal using the Google Assistant function at the same time.
-The availability of hands-free TV voice control depends on your region/country/language.
-Standby power consumption will increase
because the built-in MIC is always listening when the Google Assistant or voice control with the built-in MIC is enabled.
- An invitation prompt appears, select press OK to connect.
- Enter a correct PIN code to connect as per the
PIN message on the phone.
4.
Then dual views display and you can enjoy
di󰀨erent programmes at the same time.
5. If you want to watch only one programme, use
◄/► to select your desired view and press OK to enter the full screen.
6.
To return to the previous dual view screen, press and hold
7.
To exit the multi visual function, press select OK and press OK to conrm.
Notes:
-This feature is not available in any of the cases
below:
when TV is using Netix or Media Player.
if the video from phone/DTV is scrambled.
when the capacity of required video decoding
-When in full screen mode, due to the
compatibility of the third party's Apps, failure might occur when returning to the dual views.
-At most 2 phones can be casted to the TV at the
same time. When in dual view mode, use ◄/► to move the focus to TV view and then cast another phone to the TV.
-To disable the function, press control, select
visual settings > Multi visual
turn it off.
-To check all available history list, press remote control, select
> Multi visual settings > Connection list
press OK to enter.
on the remote control.
exceeds 4K 60Hz.
on the remote
> Device Preferences > Multi
and press OK to
> Device Preferences
Accept
, then
on the
and
and
Multi visual
Allows you to enjoy di󰀨erent programmes with your
family on one TV at the same time. The multi visual function is enabled by default. To use
the function, make sure your phone is Android OS and the WiFi on the phone is turned on. Then follow the steps below to operate.
1.
Press
on the remote control, select
Network & Internet > Wi-Fi
it on.
2.
Activate the cast screen function on your phone and choose the TV’s name you want to connect in the searching list.
3. For the rst time, depending on di󰀨erent types of
phones, there are two situations:
, and press OK to turn
>
EN
14
Page 15
Chapter 5 - Other information
Password in Parental Control
- The default password is 1234. You can change it to a new one.
- The super password is 0423. If you forget your code, enter the super password to override any existing codes.
Troubleshooting
Please check the following list before requesting
service.
There is no picture or sound.
• Make sure the power cord is properly inserted in the power outlet.
• Make sure the source type is set correctly.
• Make sure the antenna is properly connected.
• Make sure the volume is not set to minimum or the sound is not set to mute.
• Make sure the headphones are not connected.
• The TV may be receiving a signal other than from TV broadcasting stations.
Picture is not clear.
• Make sure the antenna cable is properly connected.
• Consider whether your TV signal is being properly received.
Poor picture quality can occur due to a VHS camera, camcorder, or other peripheral being
connected at the same time. Switch o󰀨 one of the
other peripherals.
• The ‘ghost’ or double image may be caused by obstruction to the antenna due to high-rise buildings or hills. Using a highly directional antenna may improve the picture quality.
• The horizontal dotted lines shown on the pictures may be caused by electrical interference, e.g., hair
dryer, nearby neon lights, etc. Turn o󰀨 or remove
these.
Picture is too dark, too light or tinted.
• Check the colour adjustment.
• Check the brightness setting.
• Check the sharpness function.
Remote control does not work.
• Check the batteries of the remote control.
• Make sure the remote sensor window on the TV
front is not under strong uorescent lighting.
• Try to clean the remote sensor window on the TV front with a soft cloth.
If the above suggestions do not solve your technical issue, please refer to the warranty card for service information.
Operating Conditions
Temperature 5°C - 35°C (41°F - 95°F) Humidity 20 - 75% (non-condensing)
Storage Conditions
Temperature -15°C - 45°C (5°F - 113°F) Humidity 10 - 90% (non-condensing)
Radio Information
• Bluetooth® transmitter frequency range:
2402 - 2480MHz
• Bluetooth® transmitter power: 6dBm (+/-4dB)
• 2.4G Wi-Fi transmitter frequency range: 2412 - 2472MHz
2.4G Wi-Fi transmitter power: 14dBm (+4dB / -5dB)
• 5G Wi-Fi transmitter frequency range:
- Band 1: 5180 - 5240MHz
- Band 4: 5745 - 5825MHz
5G Wi-Fi transmitter power: 14dBm (+4dB / -5dB)
DVB-T/T2/C tuner frequency range: 50.5 - 858MHz
DVB-S/S2 tuner frequency range: 950 - 2150MHz
* In all EU member states, operation of 5180 -
5240MHz is restricted to indoor use only.
BE BG CZ DK DE EE IE EL ES FR HR IT CY LV
LT LU HU MT NL AT PL
PT RO SI SK FI SE UK
OSS Notice
This product uses the GPL (Version 2 and 3) and LGPL (version 2.1) and MPL (version 1.1).
To send inquiries and requests for questions
regarding open source, contact nearest TCL o󰀩ce.
This product uses some software programs which are
distributed under the Independent JPEG Group.
This product uses some software programs which are
distributed under the libpng Project.
This product uses some software programs which are
distributed under the Freetype Project.
This product uses some software programs which are
distributed under the zlib Project.
This product uses some software programs (libxml2,
curl, expat, c-areas) which are distributed under the
MIT. This product uses CyberLink for C which is distributed
under the Open Source Project.
This product uses opensl, xerces which is distributed
under the Apach License Project. GPL software: Linux Kernel, glib, libiconv, gcc libgcc,
gcc libstdc++, u-Boot loader, 󰀨mepg, util-linux-ng,
e2fsprogs, wget, iptables
English
EN
15
Page 16
Other information
English
LGPL software: DFB (DirectFB), gstreamer, gst-
plugins-base, gst-plugins-good, gst-plugins-bad, gst-
plugins-ugly, gst-󰀨mpeg, glibc, wpa_supplicant
BSD software: webp, mng, uriparser GNU software: dosfstools
[Legal Statement] of TCL - manufacturer of this TV set
Due to the various capabilities of products featuring the SmartTV - Services, as well as limitations in the available content, certain features, applications, and services may not be available on all devices or in all territories. Some features on SmartTV may also require additional peripheral devices or membership
fees that are sold separately. Please visit our website for more information on specic device information
and content availability. The services and availability of content through SmartTV are subject to change from time to time without prior notice.
All content and services accessible through this device belong to third parties and are protected by
copyright, patent, trademark and/or other intellectual
property laws. Such content and services are provided solely for your personal noncommercial use. You may not use any content or services in a manner that has not been authorized by the content owner or service provider. Without limiting the foregoing, unless expressly authorized by the applicable content owner or service provider, you may not modify, copy, republish, upload, post, transmit, translate, sell, create derivative works, exploit, or distribute in any manner or medium any content or services displayed through this device.
YOU EXPRESSLY ACKNOWLEDGE AND AGREE
THAT USE OF THE DEVICE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO
SATISFACTORY QUALITY, PERFORMANCE
AND ACCURACY IS WITH YOU. THE DEVICE
AND ALL THIRD PARTY CONTENT AND SERVICES ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED. TCL EXPRESSLY DISCLAIMS
ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE DEVICE AND ANY CONTENT AND SERVICES, EITHER EXPRESS OR, IMPLIED, INCLUDING BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY, OF SATISFACTORY QUALITY, FITNESS FOR A
PARTICULAR PURPOSE, OF ACCURACY, OF
QUIET ENJOYMENT, AND NON-INFRINGEMENT
OF THIRD PARTY RIGHTS. TCL DOES NOT
GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF
ANY CONTENT OR SERVICE MADE AVAILABLE THROUGH THIS DEVICE AND DOES NOT
WARRANT THAT THE DEVICE, CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS,
OR THAT OPERATION OF THE DEVICE OR SERVICES WILL BE UNINTERRUPTED OR
ERROR-FREE. UNDER NO CIRCUMSTANCES, INCLUDING NEGLIGENCE, SHALL TCL BE LIABLE, WHETHER IN CONTRACT OR TORT, FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES, ATTORNEY FEES,
EXPENSES, OR ANY OTHER DAMAGES ARISING
OUT OF, OR IN CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE OF THE DEVICE, OR ANY CONTENT OR SERVICE ACCESSED BY YOU OR ANY THIRD
PARTY, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES.
Third party services may be changed, suspended, removed, terminated or interrupted, or access may be disabled at any time, without notice, and TCL makes no representation or warranty that any content or service will remain available for any period of time. Content and services are transmitted by third parties by means of networks and transmission facilities over which TCL has no control. Without limiting the generality of this disclaimer, TCL expressly disclaims any responsibility or liability for any change, interruption, disabling, removal of or suspension of any content or service made available through this device. TCL may impose limits on the use of or access to certain services or content, in any case and without notice or liability. TCL is neither responsible nor liable for customer service related to the content and services. Any question or request for service relating to the content or services should be made directly to the respective content and service providers.
EN
16
Loading...