![](/html/b7/b74f/b74f20b51d2a1bfb4203c005a2ff64395f7ed3c709281616ffafeae751272133/bg1.png)
Product Information Document
Guitar Accessories
TELEPORT
GLR
High-Performance Active Guitar Signal
Receiver for Long Cable Run Systems
High performance guitar signal
receiver to drive long cable guitar
signals (together with GLT)
Drives your guitar signal up to
300 feet (100 m) without any loss
High headroom design oers
superior sound quality
Variable Pickup load compensation
for pure sound
Low impedance ¼" TR output to
connect to amplier
High quality Neutrik* XLR for highest
signal integrity
Earth Lift switch eliminates ground
loop problems
Fully transformer-isolated design
ensures electrical separation
TELEPORT GLR is the receiver
component of the TELEPORT High-
Performance Active Guitar Signal
Long Cable Run System. Engineered
to convert your GLT transmitter's
balanced low-impedance (Lo-Z) signal
back to non-balanced (Hi-Z), GLR is
eective for distances up to 300 feet
(100 meters) with absolutely zero
signal loss – making it the ideal solution
for long cable runs in performance
venues and recording studios.
Ultra low noise, harmonic and phase
distortion design
Aluminium extrusion casing with
protective silicone rubber corners
Compact and rugged design
3-Year Warranty Program*
Designed and engineered
in Denmark
*All third-pa rty tradema rks are the prop erty of their re spective
owners. T heir use neither c onstitutes a claim o f the trademark no r
aliation o f the trademark ow ners with MUSIC Gro up. Product name s
are mention ed solely as a ref erence for compati bility, eect s and/or
componen ts. Warranty de tails can be found at m usic-group.com.
Long Distance Workaround
A large stage often presents a challenge when
it comes to getting your guitar signal to your
amplier, and running a long unbalanced ¼"
guitar cable can quickly suck the life out of your
precious tone. Plus, those long guitar cables
are extremely susceptible to electrical noise
and radio-frequency interference (RFI), not to
mention signal loss. TELEPORT allows you to use
standard balanced Lo-Z mic cables to eliminate
all of the above, so you never lose a drop of tone.
![](/html/b7/b74f/b74f20b51d2a1bfb4203c005a2ff64395f7ed3c709281616ffafeae751272133/bg2.png)
Product Information Document
Guitar Accessories
TELEPORT
GLR
High-Performance Active Guitar Signal
Receiver for Long Cable Run Systems
Natural Sound
You've worked hard to achieve your signature sound – and TELEPORT’s high headroom design
respects that! Whether you’re connected to a cranked stack in an o-stage isolation booth, or in the
studio, you get your guitar’s true, noise-free tone – which can even be fed to pedalboards, amps and
wireless systems.
Ease of Use
The entire TELEPORT system takes mere minutes to set up and is so easy to use, no matter the size of the
venue or studio. Just connect GLT (transmitter) and GLR (receiver) using a balanced XLR microphone
cable, hook your guitar up to the GLT, plug the GLR’s output into your amp’s input, and TELEPORT
instantly buers, balances and matches impedance all by itself. TELEPORT is even fully transformerisolated for electrical separation and ultra-low noise, with low harmonic and phase distortion
(techno-speak for: it sounds great!).
Built to Last
Housed in a sturdy aluminum casing with silicone rubber corners and a high quality Neutrik* XLR
connector, TELEPORT is built like a tank. Both practical and rugged in a compact design, TELEPORT
delivers all of your tone all of the time.
Ask your TC ELECTRONIC dealer about the incredible TELEPORT High-Performance Active Guitar Signal
Long Cable Run System, or get yours online today! Tone is a precious commodity...
2 of 5