Taylor 8756P Specifications

Rockton, Illinois 61072

800-255-0626

Phone [phone] Fax [phone]

www.taylor-company.com

e-mail: [e-mail]

International Office
Taylor Company S.r.l.
Roma, Italy
Tel: [phone] Fax: [phone]
e-mail: [e-mail]

8756P

Item No. _______________________________

8756P

Offer all the popular soft serve variations from low or non-fat
ice creams to custards, yogurt and sorbet. Serve two
separate soft serve flavors, or an equal combination of both
in a twist. The Horizon® Mix Delivery System offers high
capacity in a pressurized system with consistent overrun and
simplified operation.

Freezing Cylinder

Two, 3.4 quart (3.2 liter).

Refrigerated Mix Storage Cabinet

Lower front mix cabinet is independently refrigerated to maintain
mix below 41ºF (5ºC). Door is hinged on the right. Two, 9 gallon
(34.1 liter) mix tanks. The Horizon® Mix Delivery Systems deliver
the precise amount of air and mix to the freezing cylinder.

Indicator Lights

Mix Low light alerts the operator to add mix. When the Mix Out
light flashes, the unit shuts down automatically to prevent damage.

Electronic Controls

Finished product quality is monitored by Softech

TM

controls that

measure viscosity.

Standby

During long no-use periods, the Standby feature maintains safe
product temperatures in the freezing cylinder.

Horizon® Mix Delivery System

Easy to clean and offers reliable overrun control. Simple overrun
adjustment from 25 to 70% (depending on mix formulation). Ability
to dispense higher butterfat or fruit products with pulp.

Features

Soft Serve Freezer

Twin Twist, Horizon® Mix Delivery System

8756P

8756PSoft Serve Freezer

Electrical

Two dedicated electrical connections are required. See the Electrical chart for
the proper electrical requirements. Manufactured to be permanently
connected. Consult your local Taylor distributor for cord & receptacle
specifications as local codes allow.

Beater Motor

Two, 1.5 HP.

Refrigeration System

Two, 9,500 BTU/hr. R404A
Mix Cabinet, 1,100 BTU/hr. R404A.
(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides and 12” (305 mm) on top. Minimum
air clearances must be met to assure adequate air flow for optimum
performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

Taylor Company,

A Division of Carrier Commercial Refrigeration, Inc.
Rockton, Illinois 61072
815-624-8333 800-255-0626 Fax [phone]

www.taylor-company.com

Printed in U.S.A.

Weights lbs. kgs.

Net 855 387.8
Crated 995 451.3

cu. ft. cu. m.

Volume 79.9 2.26

Dimensions in. mm.

Width 26-7/16 672
Depth 36 914
Height 68-1/4 1734
Floor Clearance 4-1/4 108

*Mounted on standard casters

Bidding Specs

Electrical: Volt ___________________ Hz__________ ph _________

Neutral:  Yes No Cooling:  Air  Water  NA

Options:_________________________________________________
_________________________________________________________

 Cone Dispenser
 Draw Valve Lock Kit
 Sneeze Guard
 Syrup Rail Kit (side mount)

Options

Specifications

052318-ADV

3/06

Continuing research results in steady improvements; therefore, these

specifications are subject to change without notice.

Electrical Maximum Minimum

Fuse Size Circuit Ampacity Poles (P)
Left Right Left Right Wires (W)

208-230/60/1 Air 40 35 32 24 2P 3W
208-230/60/1 Water 40 35 29 24 2P 3W
208-230/60/3 Air 30 25 25 18 3P 4W
208-230/60/3 Water 30 25 23 18 3P 4W
380-415/50/3N~ Air 15 9 15 8 4P 5W

This unit may be manufactured in other electrical characteristics. Refer to the local
Taylor Distributor for availability.
(For exact electrical information, always refer to the data label of the unit.)