Page 1
TT-SD005 说明书设计
尺寸：148 x 210 mm
折页
材质：105g铜版纸
Page 2
Mounting Instructions
Sit and Stand Desktop
Features & Specifications
Units: mm/in
Mounting and Using the Desk
1
When carrying the desk, be sure to hold the
bottom with both hands, do not subject the
table to a separate force to avoid the top and
bottom falling apart.
MODEL: TT-SD005
120-490/4.7-19.3
420/16.5
Package Contents
1
915/36
735/28.9
450/17.7
819.4/32.3
315/12.4
A +B ≤
D E FCBA
X8L X1 / R X1 X1 X2
A
B
≤33lbs
(≤15kg)
≤5lbs
(≤2kg)
33 lbs (15 kg)
CAUTION: DO NOT EXCEED
MAXIMUM LISTED WEIGHT
CAPACITY. SERIOUS INJURY
OR PROPERTY DAMAGE MAY
OCCUR!
S=4mm
X1
Warning: Keep clear of the
struts to avoid pinches.
2
HEIGHT-ADJUSTABLE
STANDING DESK 36 INCH
User Guide
Tools required not included
Page 3
www.taotronics.com
ASIA PACIFIC
E-mail: support.jp@taotronics.com(JP)
JPImporter:株式会社SUNVALLEYJAPAN
〒104-0032東京都中央区八丁堀３丁目18-6PMO京橋東９F
3 6
B (L)
Fasten the steel brackets onto the keyboard tray via the included screws.
F
D
B (R)
C
E
EUROPE
E-mail:
support.uk@taotronics.com(UK)
support.de@taotronics.com(DE)
support.fr@taotronics.com(FR)
support.es@taotronics.com(ES)
support.it@taotronics.com(IT)
EU Importer: ZBT International Trading GmbH
Address: Halstenbeker Weg 98C, 25462 Rellingen, Deutschland
NORTH AMERICA
E-mail: support@taotronics.com(US)
support.ca@taotronics.com(CA)
Tel: 1-888-456-8468 (Monday-Friday: 9:00 – 17:00 PST)
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address: 46724 Lakeview Blvd, Fremont, CA 94538
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology
Development Co.,Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/downloads-TT-SD005-CE-Cert.html
4
Adjust the foot adjusters to make the desk more stable.
7
Keep monitor and laptop base fully on the worksurface.
Allowing any part of base or stand to hang off the edge
may result in property damage and or personal injury.
Raise worksurface slowly. Raising worksurface too fast may
create an unstable situation resulting in property damage
and or personal injury.
5
Squeeze the side handle
to adjust the height
490mm / 19.3in
120mm / 4.7in
Leave enough slack in cable to allow for full range of vertical
motion (19.3” / 49 cm). Failure to heed this warning may result in
property damage and or personal injury.
To avoid the potential to pinch cables it is important to follow the
cable routing instructions in this manual. Failure to follow these
instructions may result in equipment damage or personal injury.
WARNING
PINCH POINT
DO NOT place hands on or near support bars. Pinch points are created
during lifting and lowering the worksurface. Failure to follow these
instructions may result in serious personal injury.
TT-SD005_V1.3
Loading...