Tait TPEHGE Users Manual

Tait DMR Conventional and

Analog Portable Radios

User’s Guide

00001-01 · Issue 1 · September 2017

MPE-

User Guide Cross Reference

T03-00302-GCAA/GBAA/GAAA

: Analog and DMR T2 radio

Elsewhere in this manual, this is referred to as TP3300

T03-00303-GCAA/GBAA/GAAA:Same as T03-00302-GCAA/GBAA/GAAA

with added GPS and BT functionality

Elsewhere in ths manual, this is referred to as TP3350.

For your

safety..................................................................7

Menu map........................................................................20

1 About this guide .............................................................21

Safe

ty warnings used in this guide ........................................... 21

Related documentation............................................................. 22

2 B

efore using your radio .................................................23

For your safety

Attaching labels to the radio or battery ..................................... 24

Charging the battery before first use ........................................ 25

Attaching the battery................................................................. 26

Removing the battery ............................................................... 26

Attaching the antenna............................................................... 27

Removing the antenna ............................................................. 27

Replacing the belt clip .............................................................. 27

Attaching an audio accessory................................................... 28

etting started ................................................................29

3 G

About your DM

About the radio controls............................................................ 32

Understanding the radio display ............................................... 34

Understanding the radio indicators........................................... 36

Using function keys to access frequently used features........... 38

Navigating the radio’s menus ................................................... 39

4 O

peration.........................................................................40

Turning the radio

Adjusting the speaker volume .................................................. 42

Connecting to a Bluetooth

Selecting a zone ....................................................................... 45

Selecting a channel .................................................................. 45

Making a group call .................................................................. 46

Making a private call................................................................. 47

Turning scanning on and off ..................................................... 47

Making a call alert..................................................................... 48

Sending a quick text message.................................................. 49

Sending an emergency alarm................................................... 51

Turning location information on and off (TP3350 only)............. 52

— battery warning ...................... ....................... 24

R digital radio.................................................... 30

on and off ..................................................... 41

e (TP3350 only) ................... 43

devic

5 C

harging and caring for batteries.................................53

About the chargers ..

6-way charger safety information ............................................. 54

Before using the charger .......................................................... 54

................................................................. 54

Conten

ts 3

arging temperatures............................................................. 55

Leaving the battery on charge .................................................. 56

Receiving calls while charging.................................................. 56

Low battery warning ................................................................. 56

Charging a battery for the first time .......................................... 57

Charging a battery .................................................................... 57

LED behavior............................................................................ 58

Removing the battery from the charger .................................... 59

Maintaining battery life and performance ................................. 59

Storing batteries ....................................................................... 59

Disposing of batteries ............................................................... 60

6 Troublesh

About troubleshoot

ooting .............................................................61

ing............................................................... 62

When your radio won’t turn on.................................................. 62

Identifying the radio’s audible tones ......................................... 62

Viewing radio information ......................................................... 62

General care............................................................................. 63

Tait Software Licence Agreeme

nt.................................63

Simplified Declaration of Conformity ...........................71

4 C

ontents

All information contained in this document is the property of Tait Limited. All rights reserved. This document may not, in whole or in part, be copied, photocopied, reproduced, translated, stored, or reduced to any electronic medium or machine-readable form, without prior written permission from Tait Limited.

The word TAIT and the TAIT logo are trademarks of Tait Limited.

All trade names referenced are the service mark, trademark or registered trademark of the respective manufacturers.

Disclaimer

There are no warranties extended or granted by this document. Tait Limited accepts no responsibility for damage arising from use of the information contained in the document or of the equipment and software it describes. It is the responsibility of the user to ensure that use of such information, equipment and software complies with the laws, rules and regulations of the applicable jurisdictions.

Enquiries and comments

you have any enquiries regarding this document, or any comments, suggestions and notifications of errors, please contact your regional Tait office.

Updates of manual and equipment

In the interests of improving the performance, reliability or servicing of the equipment, Tait Limited reserves the right to update the equipment or this document or both without prior notice.

Intellectual property rights

This product designs of Tait Limited together with their international equivalents, pending patent or design applications, and registered trade marks: NZ 409837, NZ 409838, NZ 415277, NZ 415278, NZ 530819, NZ 534475, NZ 547713, NZ 577009, NZ 579051, NZ 579364, NZ 586889, NZ 610563, NZ 615954, NZ 700387, NZ 708662, NZ 710766, NZ 711325 , NZ 726313, NZ593887, AU 2015215962, AU 339127, AU 339391, AU2016259281, AU2016902579, EU 000915475-0001, EU 000915475-0002, GB 2532863, US 14/834609 Div. no 1, US 15/346518 Div.no 2, US 15/350332, US 15/387026 Div., US 20150085799, US 20160044572, US 20160057051,

may be protected by one or more patents or

US 64097

4, US 640977, US 698339, US 702666, US 7758996,

US 8902804, US 9107231, US 9504034, US 9559967. This product may also be made under license under one or

more of the following patents:

S7203207, AU2004246135, CA2527142, GB2418107,

- U HK1082608, MY134526, US8306071

- US7339917, AU2004246136, CA2526926, GB2418812, MY134217

- US7499441, AU2005262626, CA2570441, GB2430333, JP4690397, NZ551231, KR100869043, RU2351080, BRP10512052, MXPA06015241

7200129, AU2005226531, CA2558551, CN1930809,

- US GB2429378, JP4351720, BRP10508671, NZ549124, KR848483, RU2321952

The AMBE+2™ voice coding Technology embodied in this product is protected by intellectual property rights including patent rights, copyrights and trade secrets of Digital Voice Systems, Inc. This voice coding Technology is licensed solely for use within this Communications Equipment. The user of this Technology is explicitly prohibited from attempting to decompile, reverse engineer, or disassemble the Object Code, or in any other way convert the Object Code into a human-readable form.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc, and any use of such marks by Tait Limited is under licence. Other trademarks and trade names are those of their respective owners.

Environmental responsibilities

Tait

Limited is an environmentally responsible company which supports waste minimization, material recovery and restrictions in the use of hazardous materials.

The European Union’s Waste Electrical and Electronic Equipment (WEEE) Directive requires that this product be disposed of separately from the general waste stream when its service life is over. For more information about how to dispose of your unwanted Tait product, visit the Tait WEEE website at environmentally responsible and dispose through the original supplier, or contact Tait Limited.

Tait Limited also complies with the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (RoHS) Directive in the European Union.

In China, we comply with the Measures for Administration of the Pollution Control of Electronic Information Products. We will comply with environmental requirements in other markets as they are introduced.

www.taitradio.com/weee

. Please be

For your safety

using your radio, please read the following

Before important safety and compliance information.

Radio frequency exposure information

your own safety and to ensure you comply with the

For radio frequency (RF) exposure guidelines of the United States Federal Communication Commission’s (FCC), Industry Canada, and those from other administrations, please read the following information before using this radio.

Using this radio

You should use this radio only for work-related purposes (it is not authorized for any other use) and if you are fully aware of, and can exercise control over, your exposure to RF energy. To prevent exceeding FCC RF exposure limits, you must control the amount and duration of RF that you and other people are exposed to.

It is also important that you:

■

not remove the RF Exposure label from

the radio.

■

Ensure nies the radio when it is transferred to other users.

■ Do

guidelines on controlling your exposure to RF.

Controlling your exposure to RF energy

This radio emits radio frequency (RF) energy or radio waves primarily when calls are made. RF is a form of electromagnetic energy (as is sunlight), and there are recommended levels of maximum RF exposure.

To control your exposure to RF and comply with the maximum exposure limits for occupational/controlled environments, follow these guidelines:

this RF exposure information accompa-

not use the radio if you do not adhere to the

your safety 7

For

■

Do not talk (tra

nsmit) on the radio more than the rated transmit duty cycle. This is important because the radio radiates more energy when it is transmitting than when it is receiving.

When listeni

■

ng and talking on the radio, hold it upright in front of your face so that it is at least one inch (2.5 cm) away from any part of your face. Keeping the radio at the recommended distance is important because exposure to RF decreases rapidly the further away the antenna is from your body.

If you

■

wear your radio, you must always put it in a carrying accessory carry accessory that has been specifically approved by Tait for this radio. Using non-approved body-worn accessories may mean you expose yourself to higher levels of RF than recommended by the FCC’s occupational/controlled environment RF exposure limits.

■

Ensure you on

ly use Tait-approved antennas, bat-

teries, and accessories.

For more information on what RF energy is and how to control your exposure to it, visit the FCC website at

www.fcc.gov/oet/rfsafety/rf-faqs.html.

8 Fo

r your safety

Compliance with RF energy exposure standards

This two-way radio complies with these RF energy exposure standards and guidelines:

■

United S

tates Federal Communications Commis-

sion, Code of Federal Regulations; 47 CFR §§

1.1307, 1.1310, and 2.1093.

American National S

■

tandards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95.1-1992.

Institute of

■

Electrical and Electronic Engineers

(IEEE) C95.1-1999 Edition.

■

Europe

an Directive 2004/40/EC on minimum

health and safety requirements regarding the exposure of workers to the risks arising from physical agents (electromagnetic fields).

This radio complies with the IEEE and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk to 50% listen.

Conformité aux normes d’exposition à l’énergie RF

Cette radio émetteur-récepteur se conforme aux normes et aux règlements d’exposition à l’énergie RF :

La Commission fédérale de la communication des

■

Etats-Unis, Code de règlements fédéraux (CFR) Titre 47 Sections 1.1307, 1.1310 et 2.1091 (radios mobiles) ou 2.1093 (radios portatives).

■

American National S

tandards Institute (ANSI) / Institute of Electrical and Electronic Engineers (IEEE) C95. 1-1992.

■

Institute of Electr

ical and Electronic Engineers

(IEEE) C95.1-1999 Edition.

La dire

■

ctive européenne 2004/40/EC concernant les prescriptions minimales de sécurité et de santé relatives à l'exposition des travailleurs aux risques dus aux agents physiques (champs électromagnétiques).

Cette radio se conforme aux limites d’exposition de l’IEEE (FCC) et ICNIRP pour les environnements d’exposition au rayonnement RF professionnel et contrôlé aux cycles de marche de 50% en mode transmission et 50% en mode réception.

your safety 9

For

Radio frequency emissions limits in the USA

CFR Title 47 Part 15.19 (a) (1) - Receivers

Part 15 of the FCC Rules imposes RF emission limits on receivers. This radio complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

CFR Title 47 Part 15.19 (a) (3) - All other devices

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, purs These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

uant to part 15 of the FCC Rules.

10 For your safety

—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help.

Radio frequency emissions limits in Canada

ISEDC warning

This device complies with Innovation, Science and Economic Development Canada Compliance licenceexempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,including interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Under Innovation, Science and Economic Development Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Innovation, Science and Economic Development Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that, the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.

For your safety 11

Conformément à la réglementation d'Innovation, Sciences et Développement économique Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante.

This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal etl'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur.

12 For your safety

ISEDC Radiation Exposure Statement

This equipment complies with ISEDC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment should be installed and operated with minimum distance 2.5c m between the radiator and

body.

your

SEDC exposition aux radiations

Cet équipement est conforme avec ISEDC les limites d'exposition aux rayonnements définies pour un contrôlé environnement.

Cet émetteur ne doit pas être co-localisés ou fonctionner en conjonction avec une autre antenne ou émetteur.

Cet équipement doit être installé et utilisé avec un minimum de 2.5c m de distance entre le radiateur et votre corps.

EMC regulatory compliance in Australia

This product meets all ACMA regulatory requirements for electromagnetic compatibility (EMC). For more information about EMC compliance, visit the ACMA website at www.acma.gov.au.

Frequency band reserved for distress beacons

Frequency band 406 to 406.1 MHz is reserved for use by distress beacons. Transmissions should not be made within this frequency band.

For your safety 13

Australia and New Zealand citizens band (476.4 to 477.4 MHz)

AS/NZS 4365 deals with the use of frequencies in the

476.425 to 477.400 MHz band. Products capable of operating in this band have been approved for operation in the UHF Citizens Band Radio Service which is licensed in Australia by the ACMA Radiocommunications (Citizens Band Radio Stations) Class Licence and in New Zealand by the MED General User Radio Licence for Citizens Band Radio. Operation is subject to conditions contained within those licences.

Repeaters operate by receiving a transmission on one channel and re-transmitting it on another. Operators are required to avoid using local repeater input channels, which will be in the range of 31 to 38, unless it is intended to use the repeater facility, and to avoid using local repeater output channels, which will be in the range 1 to 8, at any time.

No voice transmissions are permitted on data channels 22 and 23. Equipment meeting this standard will inhibit voice operation on channels 22 and 23.

14 For your safety

In Australia:

Except in an emergency, a CB transmitter must

■

not be operated on UHF channels 5 and 35.

■

Channel 11 is the customary calling channel for establishing communications.

Channel 40 is the customary road vehicle chan-

■

nel.

Health, safety and electromagnetic compatibility in Europe

In the European Community, radio and telecommunications equipment is regulated by the Radio Equipment Directive (2014/52/EU). The requirements of this directive include protection of health and safety of users, as well as electromagnetic compatibility.

Intended purpose of product

This product is an FM radio transceiver. It is intended for radiocommunication in the Private Mobile Radio (PMR) or Public Access Mobile Radio (PAMR) services, to be used in all member states of the European Union (EU) and states within the European Economic Area (EEA).

Restrictions

This product can be programmed to transmit on frequencies that are not harmonized throughout the EU/EEA, and will require a licence to operate in each member state.

This product can be programmed for frequencies or emissions that may make its use illegal. Where applicable, a license must be obtained before this product is used. All license requirements must be observed. Limitations may apply to transmitter power, operating frequency, channel spacing, and emission.

Declaration of conformity

Simplified declarations of conformity appear on

page 72 of this document. To download the formal

declaration of conformity, go to www.taitradio.com/

eudoc.

For your safety 15

Interference with electronic devices

Warning Some electronic devices may be prone to

malfunction due to the lack of protection from RF energy that is present when your radio is transmitting.

Examples of electronic devices that may be affected by RF energy are:

■

aircraft electronic systems

■

vehicular electronic systems such as fuel injection, anti-skid brakes, and cruise control

medical devices such as pacemakers and hearing

■

aids

■

medical equipment in hospitals or health care facilities.

Switch off the radio before boarding an aircraft. Using your radio while in the air is not permitted.

Consult the manufacturer (or its representative) of any such electronic devices to determine whether electronic circuits in those devices will perform normally when the radio is transmitting.

16 For your safety

Warning If you have a pacemaker:

■

immediately turn off the radio if you suspect it is interfering with the pacemaker

keep the radio at least 6 inches (15 cm) from the

■

pacemaker while the radio is on

■

use the radio on the side opposite to the pacemaker to minimize interference

never carry the radio in a breast pocket.

■

If there is interference between your hearing aid and the radio, please discuss an alternative solution with the hearing aid manufacturer.

Potentially explosive atmospheres and blasting areas

Warning Unless the radio is specifically certified for

use in a potentially explosive atmosphere, turn off the radio before entering such an atmosphere. An explosion could cause serious injury or death. Examples of potentially explosive atmospheres include filling stations, and any environment where there are flammable liquids, gases, or dusts.

Warning Turn off the radio before approaching blasting caps, a blasting area, or any area where you are instructed to turn off a two-way radio. Obey all signs and instructions. Interference with blasting operations could cause serious injury or death.

Radio installation and operation in vehicles

Warning Keep the radio away from airbags and

airbag deployment areas. Do not install, charge, or place a radio near such areas. An activated airbag can propel a portable radio with sufficient force to cause serious injury to vehicle occupants. An airbag may not perform to specification if obstructed by a radio.

Warning To avoid damage to existing wiring, airbags, fuel tanks, fuel and brake lines, or battery cables, refer to the installation guide for the radio, and to the vehicle manufacturer’s manual, before installing electronic equipment in the vehicle.

Using a handheld microphone or a radio while driving a vehicle may violate the laws and legislation that apply in your country or state. Please check the vehicle regulations in your area.

6-way charger safety information

Warning This device must be connected to an

earthed mains socket-outlet.

Norsk (no): Apparatet må tilkoples jordet stikkontakt.

For your safety 17

Suomi (fi): Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.

Svenska (sv): Apparaten skall anslutas till jordat uttag.

Electromagnetic compatibility in European vehicles

In the European Community, radio equipment fitted to automotive vehicles is regulated by Directive 72/245/ EEC and its amendments. The requirements of this directive cover the electromagnetic compatibility of electrical or electronic equipment fitted to automotive vehicles.

Unapproved modifications or changes to radio

The radio is designed to satisfy the applicable compliance regulations. Do not make modifications or changes to the radio that are not expressly approved by Tait. Failure to do so could invalidate compliance requirements and void the user’s authority to operate the radio.

18 For your safety

Attaching of labels

Warning Do not obstruct the vent hole on the battery

or the vent hole on the radio chassis label. If the vent on the battery is obstructed, the battery may explode, causing personal injury and/or damage to property. If the vent on the radio is obstructed, audio quality and/ or key function may deteriorate and radio seals may be damaged.

Caution Tait recommends that you do not affix additional labels to the surfaces between the radio chassis and the battery. The fit between these surfaces is intentionally firm and any added thickness will damage the points of attachment between radio and battery. Do not obstruct the vent holes (see

Warning above). Do not allow the paper label to extend beyond the recessed label area or to conceal relevant product information.

Use of lithium-ion batteries

Warning A damaged battery can cause an explosion

or fire, and can result in personal injury and/or property damage. To prevent personal injury and/or damage to property, read the important safety information supplied with the battery.

Short-circuiting battery contacts

Warning Do not short-circuit the battery contacts,

neither intentionally nor accidentally, e.g. by placing the battery with conductive materials such as keys or jewelry inside a pocket or container. Short-circuiting the battery contacts can heat up the conductive material and cause personal injury and/or damage to property.

For your safety 19

Menu map

This section shows the menus and submenus that may be programmed for your radio (for radios with display only).

Contact

Favorite Contact List Contact List

Edit Contact Delete Contact View Contact

New Contact Manual Dial

Ctrl Services

Alert Call Radio Check Radio Disable Radio Enable Remote Monitor

Message

New Message Quick Text Status Message Inbox

Forward Reply

Outbox Drafts

Call Logs

Outgoing Incoming

Missed Zone Scan

Scan On/Off

Scan List Programming

Channel

Frequency Slot Color COde Tx Contact Rx Group List CTCSS

Radio

Radio Alias Radio ID

Settings

Radio Settings

Talk Around Power LEvel Squelch Level Lone Worker Backlight Day/Night Mode Brightness Keypad Lock LED Tones Man Down

Encrypt Channel Display Mode Language Radio Password Optional Key VOX Keypad Mode Vibration

Radio Information

Accessories

GPS Position View Time Zone

BT Work Order

20 Menu map

1. TP3350 only

1 A

Th TP3300 and TP3350 DMR conventional and analog portable radios.

In addition to the TP3300, the TP33 functionality.

Both models are available with the following front panels:

■

These front panels are interchangeable. Contact your radio provide for more information.

The radio behavior described in this guide applies to radios with firmware version v1.01. If your radio does not operate as you expect, contact your radio provider for assistance.

bout this guide

is user’s guide provides information about the

50 also has Bluetooth

display an

display and no keys

d 16 keys

d 4 keys

, GPS, and

man-down

Safety warnings used in this guide

Plea the text as an ‘alert’. An alert provides necessary safety information as well as instruction in the proper use of the product. This user’s guide uses the following types of alert:

Warning This alert is used when there is a hazardous situation which, if not avoided, could result in death or serious injury.

Caution This alert is used when there is a hazardous situation which, if not avoided, could result in minor or moderate injury.

follow exactly any instruction that appears in

About th

is guide 21

Notice This alert is used to highlight information that

is required to ensure procedures are performed correctly. Incorrectly performed procedures could result in equipment damage or malfunction.

This icon is used to draw your attention to information that may improve your understanding of the equipment or procedure.

Tait TPEHGE Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

User’s Guide

Contents

For your safety

Menu map

Safety warnings used in this guide

Related documentation