Tait TPCH6A, TPCH5A Users Manual
Safety and Compliance Information
Informations sur la conformité et
consignes de sécurité
Información sobre medidas de seguridad y conformidad del producto
产品安全与符合性信息
MPC-00004-01
Issue 1 (Draft)
July 2007
© Tait Electronics Limited 2007
Directive 1999/5/EC Declaration of Conformity
da Dansk
Undertegnede Tait Electronics Limited
erklærer herved, at følgende udstyr TPCB1A,
TPCH5A & TPCH6A overholder de væsentlige
krav og øvrige relevante krav i direktiv 1999/
5/EF.
Se endvidere:
de Deutsch
Hiermit erklärt Tait Electronics Limited die
http://eudocs.taitworld.com/
Übereinstimmung der Geräte TPCB1A,
TPCH5A & TPCH6A mit den grundlegenden
Anforderungen und den anderen relevanten
Festlegungen der Richtlinie 1999/5/EG.
Siehe auch:
el Ελληνικός
Με την παρουσα Tait Electronics Limited
δηλωνει οτι TPCB1A, TPCH5A & TPCH6A
συμμορφωνεται προσ τισ ουσιωδεισ
απαιτησεισ και τισ λοιπεσ σχετικεσ
διαταξεισ τησ οδηγιασ 1999/5/ΕΚ.
βλέπε και:
en English
Tait Electronics Limited declares that this
http://eudocs.taitworld.com/
http://eudocs.taitworld.com/
TPCB1A, TPCH5A & TPCH6A complies with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
See also:
http://eudocs.taitworld.com/
es Español
Por medio de la presente Tait Electronics
Limited declara que el TPCB1A, TPCH5A &
TPCH6A cumple con los requisitos esenciales
y cualesquiera otras disposiciones aplicables
o exigibles de la Directiva 1999/5/CE.
Vea también:
fi Suomi
Tait Electronics Limited vakuuttaa täten että
http://eudocs.taitworld.com/
TPCB1A, TPCH5A & TPCH6A tyyppinen laite
on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden
ehtojen mukainen.
Katso:
http://eudocs.taitworld.com/
fr Français
Par la présente, Tait Electronics Limited
déclare que l'appareil TPCB1A, TPCH5A &
TPCH6A est conforme aux exigences essentielles et aux autres dispositions pertinentes
de la directive 1999/5/CE.
Voir aussi:
http://eudocs.taitworld.com/
it Italiano
Con la presente Tait Electronics Limited dichiara che questo TPCB1A, TPCH5A & TPCH6A
è conforme ai requisiti essenziali ed alle altre
disposizioni pertinenti stabilite dalla direttiva
1999/5/CE.
Vedi anche:
nl Nederlands
Hierbij verklaart Tait Electronics Limited dat
http://eudocs.taitworld.com/
het toestel TPCB1A, TPCH5A & TPCH6A in
overeenstemming is met de essentiële eisen
en de andere relevante bepalingen van richtlijn 1999/5/ EG.
Zie ook:
http://eudocs.taitworld.com/
pt Português
Tait Electronics Limited declara que este
TPCB1A, TPCH5A & TPCH6A está conforme
com os requisitos essenciais e outras
provisões da Directiva 1999/5/CE.
Veja também:
sv Svensk
Härmed intygar Tait Electronics Limited att
http://eudocs.taitworld.com/
denna TPCB1A, TPCH5A & TPCH6A står I
överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser
som framgår av direktiv 1999/5/EG.
Se även:
http://eudocs.taitworld.com/
2 © Tait Electronics Limited 2007
Copyright and trademarks
All information contained in this manual is the property of Tait
Electronics Limited. All rights reserved. This manual may not, in
whole or in part, be copied, photocopied, reproduced, translated,
stored, or reduced to any electronic medium or machine-readable
form, without prior written permission from Tait Electronics
Limited.
The word TAIT and the TAIT logo are trademarks of Tait
Electronics Limited.
All trade names referenced are the service mark, trademark or
registered trademark of the respective manufacturers.
English
Intellectual property rights
This product may be protected by one or more patents of Tait
Electronics Limited together with their international equivalents,
pending patent applications and registered trade marks:
NZ338097, NZ 508054, NZ508340, NZ 508806, NZ508807,
NZ509242, NZ 509640, NZ509959, NZ 510496, NZ511155,
NZ511421, NZ 516280/519742, NZ519118, NZ 519344,
NZ520650/537902, NZ522236, NZ524369, NZ 524378,
NZ524509, NZ 524537, NZ524630, NZ 530819, NZ534475,
NZ534692, NZ 535471, NZ536945, NZ 537434, NZ546295,
NZ547713, NZ 521450, AU2003281447, AU 2002235062,
AU2004216984, AU 2005207405, CA2439018, CA 2554213,
EU03784706.8, EU 02701829.0, EU04714053.8,
EU05704655.9, GB 23865476, GB2386010, GB 2413249,
GB0516092.4, US 11,232716, US10/597339, US 10/520827,
US10/468740, US 5,745,840, US10/547653, US 10/546696,
US10/547964, US 10/523952, US11/572700.
To our European customers
Tait Electronics Limited is an environmentally
responsible company which supports waste
minimization and material recovery. The European
Union’s Waste Electrical and Electronic Equipment
separately from the general waste stream when its service life is
over. Please be environmentally responsible and dispose through
the original supplier, your local municipal waste “separate
collection” service, or contact Tait Electronics Limited.
Directive requires that this product be disposed of
Safety and compliance information
3
Chassis engraving will void warranty
Engraving the chassis of your portable radio can sig-
English
Caution:
nificantly reduce its mechanical strength and will void any warranty. If the chassis has been engraved, it must be replaced.
4
Safety and compliance information
About this booklet
This booklet contains important safety and
compliance information. For information about the
way your radio operates, contact your
radio provider.
Before using your radio, please read the following
important safety and compliance information.
Radio frequency exposure information
For your own safety and to ensure you comply with
the Federal Communication Commission’s (FCC)
radio frequency (RF) exposure guidelines, please
read the following information before using
this radio.
Using this radio
You should use this radio only for work-related
purposes (it is not authorized for any other use) and
if you are fully aware of, and can exercise control
over, your exposure to RF energy. To prevent
exceeding FCC RF exposure limits, you must control
the amount and duration of RF that you and other
people are exposed to.
It is also important that you:
Q Do not remove the RF Exposure label from
the radio.
English
Safety and compliance information
5
English
Q Ensure this RF exposure information accompa-
nies the radio when it is transferred to
other users.
Q Do not use the radio if you do not adhere to
the guidelines on controlling your exposure
to RF.
Controlling your exposure to
RF energy
This radio emits radio frequency (RF) energy or
radio waves primarily when calls are made. RF is a
form of electromagnetic energy (as is sunlight), and
there are recommended levels of maximum
RF exposure.
To control your exposure to RF and comply with the
maximum exposure limits for
occupational/controlled environments, follow
these guidelines:
Q Do not talk (transmit) on the radio more than
the rated transmit duty cycle. This is important
because the radio radiates more energy when
it is transmitting than when it is receiving.
Q When listening and talking on the radio, hold it
upright in front of your face so that it is at least
one inch (2.5 cm) away from any part of your
face. Keeping the radio at the recommended
distance is important because exposure to RF
decreases rapidly the further away the antenna
is from your body.
6
Safety and compliance information
Q Keep the antenna at least one inch (2.5 cm)
from your face at all times.
Q If you wear your radio, you must always put it
in a carrying accessory that has been specifically approved by Tait for this radio. Using nonapproved body-worn accessories may mean
you expose yourself to higher levels of RF than
recommended by the FCC’s occupational/controlled environment RF exposure limits.
Q Ensure you only use Tait-approved antennas,
batteries, and accessories.
For more information on what RF energy is and
how to control your exposure to it, visit the FCC
website at
http://www.fcc.gov/oet/rfsafety/rf-faqs.html.
Compliance with RF energy exposure standards
This two-way radio complies with these RF energy
exposure standards and guidelines:
Q United States Federal Communications Com-
mission, Code of Federal Regulations; 47 CFR
§§ 1.1307, 1.1310, and 2.1093.
Q American National Standards Institute (ANSI) /
Institute of Electrical and Electronic Engineers
(IEEE) C95.1-1992.
Q Institute of Electrical and Electronic Engineers
(IEEE) C95.1-1999 Edition.
English
Safety and compliance information
7
This radio complies with the IEEE and ICNIRP
exposure limits for occupational/controlled RF
English
exposure environments at operating duty factors of
up to 50% transmitting (even though the approved
batteries for this radio are rated for a 5-5-90 duty
factor (5% talk-5% listen-90% standby)).
Radio frequency emissions limits in
the USA
Part 15 of the FCC Rules imposes RF emission limits
on receivers.
This radio complies with Part 15 of the FCC Rules.
Operation is subject to the condition that this
device does not cause harmful interference.
Unapproved modifications or changes
to radio
The radio is designed to satisfy the applicable
compliance regulations. Do not make modifications
or changes to the radio that are not expressly
approved by Tait Electronics Limited. Failure to do
so could invalidate compliance requirements and
void the user’s authority to operate the radio.
8
Safety and compliance information
Health, safety and electromagnetic
compatibility in Europe
In the European Community, radio and
telecommunications equipment is regulated by
Directive 1999/5/EC, also known as the Radio and
Telecommunications Terminal Equipment (R&TTE)
directive. The requirements of this directive include
protection of health and safety of users, as well as
electromagnetic compatibility.
Intended purpose of product
This product is an FM radio transceiver. Its intended
purpose is for radio communication in Private
Mobile Radio (PMR) services or Public Access
Mobile Radio (PAMR) services.
Note: This product can be programmed for
frequencies or emissions that may make its use
illegal. Where applicable, a license must be
obtained before this product is used. All license
requirements must be observed. Limitations may
apply to transmitter power, operating frequency,
channel spacing, and emission.
Declaration of conformity
Brief Declarations of Conformity appear on page 2
of this booklet. To download the formal declaration
of conformity, go to http://eudocs.taitworld.com/.
A signed and dated paper copy of the declaration of
conformity can be obtained from Tait Europe Limited.
English
Safety and compliance information
9
Electromagnetic compatibility in European vehicles
English
In the European Community, radio equipment
fitted to automotive vehicles is regulated by
Directive 72/245/EEC, as amended by 95/54/EC.
The requirements of this directive cover the
electromagnetic compatibility of electrical or
electronic equipment fitted to automotive vehicles.
Note: To meet the requirements of Directive
72/245/EEC (as amended by 95/54/EC), installation
of this product in a vehicle must be performed
according to the instructions provided, and any
guidelines of the vehicle manufacturer.
Frequency band reserved for
distress beacons
Frequency band 406 to 406.1 MHz is reserved for
use by distress beacons. Transmissions should not
be made within this frequency band.
Safe radio operation
Warning: Switch off the radio:
Q at petrol filling stations or near flammable
liquids or gases
Q in the vicinity of explosive devices and
blasting zones
10
Safety and compliance information
Q before boarding an aircraft. Using your
radio while in the air is not permitted.
Using a handheld microphone or a radio while
driving a vehicle may violate the laws and
legislation that apply in your country or state.
Please check the vehicle regulations in your area.
Interference with electronic devices
Some electronic devices may be prone to
malfunction due to the lack of protection from RF
energy that is present when your radio
is transmitting.
Examples of electronic devices that may be affected
by RF energy are:
Q vehicular electronic systems such as fuel injec-
tion, anti-skid brakes, and cruise control
Q medical devices such as hearing aids
and pacemakers
Q medical equipment in hospitals or health
care facilities.
Consult the manufacturer (or its representative) of
the equipment to determine whether these
electronic circuits will perform normally when the
radio is transmitting.
English
Safety and compliance information
11
Tait licence agreement
This legal document is an Agreement
between you (the “Licensee”) and Tait
English
Electronics Limited (“Tait”). By using
any of the Software or Firmware items
prior-installed in the related Tait
product, included on CD or
downloaded from the Tait website,
(hereinafter referred to as “the
Software or Firmware”) you agree to
be bound by the terms of this
Agreement. If you do not agree to the
terms of this Agreement, do not install
and use any of the Software or
Firmware. If you install and use any of
the Software or Firmware that will be
deemed to be acceptance of the terms
of this licence agreement.
The terms of this Agreement shall
apply subject only to any express
written terms of agreement to the
contrary between Tait and
the Licensee.
Licence
TAIT GRANTS TO YOU AS LICENSEE THE NON-
EXCLUSIVE RIGHT TO USE THE SOFTWARE OR
FIRMWARE ON A SINGLE MACHINE PROVIDED
YOU MAY ONLY:
1.
COPY THE SOFTWARE OR FIRMWARE INTO
ANY MACHINE READABLE OR PRINTED
FORM FOR BACKUP PURPOSES IN SUPPORT
OF YOUR USE OF THE PROGRAM ON THE
SINGLE MACHINE (CERTAIN PROGRAMS,
HOWEVER, MAY INCLUDE MECHANISMS
TO LIMIT OR INHIBIT COPYING, THEY ARE
MARKED “COPY PROTECTED”), PROVIDED
THE COPYRIGHT NOTICE MUST BE REPRO-
DUCED AND INCLUDED ON ANY SUCH
COPY OF THE SOFTWARE OR FIRMWARE;
AND / OR
2. MERGE IT INTO ANOTHER PROGRAM FOR
YOUR USE ON THE SINGLE MACHINE (ANY
PORTION OF ANY SOFTWARE OR FIRM-
WARE MERGED INTO ANOTHER PROGRAM
WILL CONTINUE TO BE SUBJECT TO THE
TERMS AND CONDITIONS OF THIS AGREE-
MENT).
THE LICENSEE MAY NOT DUPLICATE, MODIFY,
REVERSE COMPILE OR REVERSE ASSEMBLE ANY
SOFTWARE OR FIRMWARE IN WHOLE
OR PART.
Important Notice
THE SOFTWARE OR FIRMWARE MAY CONTAIN
OPEN SOURCE SOFTWARE COMPONENTS
OPEN SOURCE COMPONENTS”). OPEN
(“
SOURCE COMPONENTS ARE EXCLUDED FROM
THE TERMS OF THIS AGREEMENT EXCEPT AS
EXPRESSLY STATED IN THIS AGREEMENT AND
ARE COVERED BY THE TERMS OF THEIR
RESPECTIVE LICENCES WHICH MAY EXCLUDE
OR LIMIT ANY WARRANTY FROM OR LIABILITY
OF THE DEVELOPERS AND/OR COPYRIGHT
HOLDERS OF THE OPEN SOURCE COMPONENT
FOR THE PERFORMANCE OF THOSE OPEN
SOURCE COMPONENTS. YOU AGREE TO BE
BOUND BY THE TERMS AND CONDITIONS OF
EACH SUCH LICENCE. FOR MORE
INFORMATION SEE:
http://support.taitworld.com/go/opens
ource
Title to Software
THIS AGREEMENT DOES NOT CONSTITUTE A
CONTRACT OF SALE IN RELATION TO THE
SOFTWARE OR FIRMWARE SUPPLIED TO THE
LICENSEE. NOT WITHSTANDING THE LICENSEE
MAY OWN THE MAGNETIC OR OTHER
PHYSICAL MEDIA ON WHICH THE SOFTWARE
OR FIRMWARE WAS ORIGINALLY SUPPLIED, OR
HAS SUBSEQUENTLY BEEN RECORDED OR
12
Safety and compliance information
FIXED, IT IS A FUNDAMENTAL TERM OF THIS
AGREEMENT THAT AT ALL TIMES TITLE AND
OWNERSHIP OF THE SOFTWARE OR
FIRMWARE, WHETHER ON THE ORIGINAL
MEDIA OR OTHERWISE, SHALL REMAIN VESTED
IN TAIT OR THIRD PARTIES WHO HAVE
GRANTED LICENCES TO TAIT.
Term and Termination
THIS LICENCE SHALL BE EFFECTIVE UNTIL
TERMINATED IN ACCORDANCE WITH THE
PROVISIONS OF THIS AGREEMENT. THE
LICENSEE MAY TERMINATE THIS LICENCE AT
ANY TIME BY DESTROYING ALL COPIES OF THE
SOFTWARE OR FIRMWARE AND ASSOCIATED
WRITTEN MATERIALS. THIS LICENCE WILL BE
TERMINATED AUTOMATICALLY AND WITHOUT
NOTICE FROM TAIT IN THE EVENT THAT THE
LICENSEE FAILS TO COMPLY WITH ANY TERM
OR CONDITION OF THIS AGREEMENT. THE
LICENSEE AGREES TO DESTROY ALL COPIES OF
THE SOFTWARE OR FIRMWARE AND
ASSOCIATED WRITTEN MATERIALS IN THE
EVENT OF SUCH TERMINATION.
Limited Warranty
THE SOFTWARE OR FIRMWARE (INCLUDING
OPEN SOURCE COMPONENTS) IS SUPPLIED BY
TAIT AND ACCEPTED BY THE LICENSEE “AS IS”
WITHOUT WARRANTY OF ANY KIND EITHER
EXPRESSED OR IMPLIED, INCLUDING BUT NOT
BEING LIMITED TO ANY IMPLIED WARRANTIES
AS TO MERCHANTABILITY OR FITNESS FOR
ANY PARTICULAR PURPOSE. THE LICENSEE
ACKNOWLEDGES THAT THE SOFTWARE OR
FIRMWARE (INCLUDING OPEN SOURCE
COMPONENTS) IS USED BY IT IN BUSINESS AND
ACCORDINGLY TO THE MAXIMUM EXTENT
PERMITTED BY LAW NO TERMS OR
WARRANTIES WHICH ARE IMPLIED BY
LEGISLATION SHALL APPLY TO THIS
AGREEMENT. TAIT DOES NOT WARRANT THAT
THE FUNCTIONS CONTAINED IN THE
SOFTWARE OR FIRMWARE (INCLUDING OPEN
SOURCE COMPONENTS) WILL MEET THE
LICENSEE’S REQUIREMENTS OR THAT THE
OPERATION OF THE SOFTWARE OR FIRMWARE
INCLUDING OPEN SOURCE COMPONENTS)
(
WILL BE UNINTERRUPTED OR ERROR FREE.
Exclusion of Liability
IN NO CIRCUMSTANCES SHALL TAIT BE UNDER
ANY LIABILITY TO THE LICENSEE, OR ANY
OTHER PERSON WHATSOEVER, WHETHER IN
TORT (INCLUDING NEGLIGENCE), CONTRACT
EXCEPT AS EXPRESSLY PROVIDED IN THIS
(
AGREEMENT), EQUITY, UNDER ANY STATUTE,
OR OTHERWISE AT LAW FOR ANY LOSSES OR
DAMAGES WHETHER GENERAL, SPECIAL,
EXEMPLARY, PUNITIVE, DIRECT, INDIRECT OR
CONSEQUENTIAL ARISING OUT OF OR IN
CONNECTION WITH ANY USE OR INABILITY OF
USING THE SOFTWARE OR FIRMWARE
INCLUDING OPEN SOURCE COMPONENTS).
(
THE LICENSEE’S SOLE REMEDY AGAINST TAIT
WILL BE LIMITED TO BREACH OF CONTRACT
AND TAIT’S SOLE AND TOTAL LIABILITY FOR
ANY SUCH CLAIM SHALL BE LIMITED AT THE
OPTION OF TAIT TO THE REPAIR OR
REPLACEMENT OF THE SOFTWARE OR
FIRMWARE OR THE REFUND OF THE PURCHASE
PRICE OF THE SOFTWARE OR FIRMWARE.
General
THE LICENSEE CONFIRMS THAT IT SHALL
COMPLY WITH THE PROVISIONS OF LAW IN
RELATION TO THE SOFTWARE OR FIRMWARE.
Law and Jurisdiction
THIS AGREEMENT SHALL BE SUBJECT TO AND
CONSTRUED IN ACCORDANCE WITH
NEW ZEALAND LAW AND DISPUTES BETWEEN
THE PARTIES CONCERNING THE PROVISIONS
HEREOF SHALL BE DETERMINED BY THE NEW
ZEALAND COURTS OF LAW. PROVIDED
HOWEVER TAIT MAY AT ITS ELECTION BRING
English
Safety and compliance information
13
PROCEEDINGS FOR BREACH OF THE TERMS
HEREOF OR FOR THE ENFORCEMENT OF ANY
JUDGEMENT IN RELATION TO A BREACH OF
THE TERMS HEREOF IN ANY JURISDICTION TAIT
English
CONSIDERS FIT FOR THE PURPOSE OF
ENSURING COMPLIANCE WITH THE TERMS
HEREOF OR OBTAINING RELIEF FOR BREACH OF
THE TERMS HERE OF.
No Dealings
THE LICENSEE MAY NOT SUBLICENSE, ASSIGN
OR TRANSFER THE LICENCE OR THE PROGRAM
EXCEPT AS EXPRESSLY PROVIDED IN THIS
AGREEMENT. ANY ATTEMPT OTHERWISE TO
SUBLICENSE, ASSIGN OR TRANSFER ANY OF
THE RIGHTS, DUTIES OR OBLIGATIONS
HEREUNDER IS VOID.
No Other Terms
THE LICENSEE ACKNOWLEDGES THAT IT HAS
READ THIS AGREEMENT, UNDERSTANDS IT
AND AGREES TO BE BOUND BY ITS TERMS AND
CONDITIONS. THE LICENSEE FURTHER AGREES
THAT SUBJECT ONLY TO ANY EXPRESS
WRITTEN TERMS OF AGREEMENT TO THE
CONTRARY BETWEEN TAIT AND THE LICENSEE
THIS IS THE COMPLETE AND EXCLUSIVE
STATEMENT OF THE AGREEMENT BETWEEN IT
AND TAIT IN RELATION TO THE SOFTWARE OR
FIRMWARE WHICH SUPERSEDES ANY
PROPOSAL OR PRIOR AGREEMENT, ORAL OR
WRITTEN AND ANY OTHER COMMUNICATIONS
BETWEEN THE LICENSEE AND TAIT RELATING
TO THE SOFTWARE OR FIRMWARE.
14
Safety and compliance information
Loading...