5BJUDMR Conventional and
Analog Portable
Radios
User’s Guide
MPE
-00001-01 · Issue 1 · September 2017
66TFS(VJEF$SPTT3FGFSFODF
&MTFXIFSFJOUIJTNBOVBMUIJTJTSFGFSSFEUPBT51
XJUIBEEFE(14BOE#5GVODUJPOBMJUZ
&MTFXIFSFJOUITNBOVBMUIJTJTSFGFSSFEUPBT51
T03-00302-GCAA/GBAA/GAAA
"OBMPHBOE%.35SBEJP
T03-00303-GCAA/GBAA/GAAA:Same as T03-00302-GCAA/GBAA/GAAA
Package List
Accessories Photo Quantity
1 Radio
1
2 Antenna
1
3 Battery
1
4 Charger
1
5 Power Adapter
1
6 Belt Clip
1
7 Headset
1
Co
ntents 3
Contents
For your safety
..................................................................7
Menu map........................................................................20
1 About this guide .............................................................21
Saf
ety warnings used in this guide ........................................... 21
Related documentation............................................................. 22
2Before using your radio
.................................................23
For your
safety — battery warning .................................. ........... 24
Attaching labels to the radio or battery ..................................... 24
Charging the battery before first use ........................................ 25
Attaching the battery................................................................. 26
Removing the battery ............................................................... 26
Attaching the antenna............................................................... 27
Removing the antenna ............................................................. 27
Attaching an audio accessory................................................... 28
3
Getting started................................................................29
About your D
MR digital radio.................................................... 30
About the radio controls............................................................ 32
Understanding the radio display ............................................... 34
Understanding the radio indicators........................................... 36
Using function keys to access frequently used features........... 38
Navigating the radio’s menus ................................................... 39
4
Operation.........................................................................40
Turning the
radio on and off ..................................................... 41
Adjusting the speaker volume .................................................. 42
Connecting to a Bluetooth
®
device (TP3350 only)
................... 43
Selecting a zone ....................................................................... 45
Selecting a channel .................................................................. 45
Making a group call .................................................................. 46
Making a private call................................................................. 47
Turning scanning on and off ..................................................... 47
Making a call alert..................................................................... 48
Sending a quick text message.................................................. 49
Sending an emergency alarm................................................... 51
Turning location information on and off (TP3350 only)............. 52
5Chargi
ng and caring for batteries.................................53
About the chargers
................................................................... 54
6-way charger safety information ............................................. 54
Before using the charger .......................................................... 54
4 Cont
ents
C
harging temperatures............................................................. 55
Leaving the battery on charge .................................................. 56
Receiving calls while charging.................................................. 56
Low battery warning ................................................................. 56
Charging a battery for the first time .......................................... 57
Charging a battery .................................................................... 57
LED behavior............................................................................ 58
Removing the battery from the charger .................................... 59
Maintaining battery life and performance ................................. 59
Storing batteries ....................................................................... 59
Disposing of batteries ............................................................... 60
6
Troubleshooting .............................................................61
About troubleshooting............................................................... 62
When your radio won’t turn on.................................................. 62
Identifying the radio’s audible tones ......................................... 62
Viewing radio information ......................................................... 62
General care............................................................................. 63
Tait Software Lice
nce Agreement.................................63
Simplified Declaration of Conformity ...........................71
5
Copyright and trademarks
All
information contained in this document is the property of
Tait Limited. All rights reserved. This document may not, in
whole or in part, be copied, photocopied, reproduced,
translated, stored, or reduced to any electronic medium or
machine-readable form, without prior written permission from
Tait Limited.
The word TAIT and the TAIT logo are trademarks of Tait
Limited.
All trade names referenced are the service mark, trademark
or registered trademark of the respective manufacturers.
Disclaimer
The
re are no warranties extended or granted by this
document. Tait Limited accepts no responsibility for damage
arising from use of the information contained in the document
or of the equipment and software it describes. It is the
responsibility of the user to ensure that use of such
information, equipment and software complies with the laws,
rules and regulations of the applicable jurisdictions.
Enquiries and comment
s
If you
have any enquiries regarding this document, or any
comments, suggestions and notifications of errors, please
contact your regional Tait office.
Up
dates of manual and equipment
I
n the interests of improving the performance, reliability or
servicing of the equipment, Tait Limited reserves the right to
update the equipment or this document or both without
prior notice.
Intellectual property right
s
This prod
uct may be protected by one or more patents or
designs of Tait Limited together with their international
equivalents, pending patent or design applications, and
registered trade marks: NZ 409837, NZ 409838, NZ 415277,
NZ 415278, NZ 530819, NZ 534475, NZ 547713, NZ 577009,
NZ 579051, NZ 579364, NZ 586889, NZ 610563, NZ 615954,
NZ 700387, NZ 708662, NZ 710766, NZ 711325 , NZ 726313,
NZ593887, AU 2015215962, AU 339127, AU 339391,
AU2016259281, AU2016902579, EU 000915475-0001,
EU 000915475-0002, GB 2532863, US 14/834609 Div. no 1,
US 15/346518 Div.no 2, US 15/350332, US 15/387026 Div.,
US 20150085799, US 20160044572, US 20160057051,
6
US 6
40974, US 640977, US 698339, US 702666, US 7758996,
US 8902804, US 9107231, US 9504034, US 9559967.
This product may also be made under license under one or
more of the following patents:
- US720
3207, AU2004246135, CA2527142, GB2418107,
HK1082608, MY134526, US8306071
-
US7339917, AU2004246136, CA2526926, GB2418812,
MY134217
-
US7499441, AU2005262626, CA2570441, GB2430333,
JP4690397, NZ551231, KR100869043, RU2351080,
BRP10512052, MXPA06015241
- U
S 7200129, AU2005226531, CA2558551, CN1930809,
GB2429378, JP4351720, BRP10508671, NZ549124,
KR848483, RU2321952
The AMBE+2™ voice coding Technology embodied in this
product is protected by intellectual property rights including
patent rights, copyrights and trade secrets of Digital Voice
Systems, Inc. This voice coding Technology is licensed solely
for use within this Communications Equipment. The user of
this Technology is explicitly prohibited from attempting to
decompile, reverse engineer, or disassemble the Object
Code, or in any other way convert the Object Code into a
human-readable form.
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc, and any use of
such marks by Tait Limited is under licence. Other
trademarks and trade names are those of their respective
owners.
Environment
al responsibilities
T
ait Limited is an environmentally responsible company
which supports waste minimization, material recovery and
restrictions in the use of hazardous materials.
The European Union’s Waste Electrical and Electronic
Equipment (WEEE) Directive requires that this product be
disposed of separately from the general waste stream when
its service life is over. For more information about how to
dispose of your unwanted Tait product, visit the Tait WEEE
website at
www.taitradi
o.com/weee. Please be
environmentally responsible and dispose through the original
supplier, or contact Tait Limited.
Tait Limited also complies with the Restriction of the Use of
Certain Hazardous Substances in Electrical and Electronic
Equipment (RoHS) Directive in the European Union.
In China, we comply with the Measures for Administration of
the Pollution Control of Electronic Information Products. We
will comply with environmental requirements in other markets
as they are introduced.
Fo
r your safety 7
For your safety
Before using
your radio, please read the following
important safety and compliance information.
Radio frequency exposure information
For your own safety and to ensure you comply with the
radio frequency (RF) exposure guidelines of the
United States Federal Communication Commission’s
(FCC), Industry Canada, and those from other
administrations, please read the following information
before using this radio.
Using this radio
You should use this radio only for work-related
purposes (it is not authorized for any other use) and if
you are fully aware of, and can exercise control over,
your exposure to RF energy. To prevent exceeding
FCC RF exposure limits, you must control the amount
and duration of RF that you and other people are
exposed to.
It is also important that you:
■
Do not remove the RF Exposure label from
th
e radio.
■
Ensure this RF exposure information
accompa-
nies the radio when it is transferred to other users.
■
Do
not use the radio if you do not adhere to the
guidelines on controlling your exposure to RF.
Controlling your exposure to RF energy
This radio emits radio frequency (RF) energy or radio
waves primarily when calls are made. RF is a form of
electromagnetic energy (as is sunlight), and there are
recommended levels of maximum RF exposure.
To control your exposure to RF and comply with the
maximum exposure limits for occupational/controlled
environments, follow these guidelines:
time. T
o transmit (talk), press the press-To-Talk(PTT) key.
energy only when transmitting (in terms of
Transmitting 50% of
the time, or
To receive calls, release the PTT key.
Transmit no more than the rated duty factor of 50% of the
8 For your safe
ty
■
Do not ta
lk (transmit) on the radio more than the
rated transmit duty cycle. This is important
because the radio radiates more energy when it is
transmitting than when it is receiving.
■
When listening and t
alking on the radio, hold it
upright in front of your face so that it is at least one
inch (2.5 cm) away from any part of your face.
Keeping the radio at the recommended distance is
important because exposure to RF decreases rapidly the further away the antenna is from
your body.
■
If you wear your radio, you must always put it in a
carrying accessory carry accessory that has been
specifically approved by Tait for this radio. Using
non-approved body-worn accessories may mean
you expose yourself to higher levels of RF than
recommended by the FCC’s occupational/controlled environment RF exposure limits.
■
Ensure you only use
Tait-approved antennas, bat-
teries, and accessories.
For more information on what RF energy is and how
to control your exposure to it, visit the FCC website at
www.fcc.gov/oet/rfsafety/rf-faqs.html.
Compliance with RF energy exposure standards
This two-way radio complies with these RF energy
exposure standards and guidelines:
less, is important because the
measurable RF
measuring for st
andards compliance).
■
radio generates
■
Use only manufacturer’s approved supplied
.
Use of non-manufacturer-name approved antennas,
batteries, and accessories may
exceed the FCC RF exposure guidelines.
Warning: when using the products, users or third parties
should use the approved matched antenna, can’t use other
antenna, and the matched antenna must be installed.
Fo
r your safety 9
■
European Directive 2004/40/EC on
minimum
health and safety requirements regarding the
exposure of workers to the risks arising from physical agents (electromagnetic fields).
This radio complies with the IEEE and ICNIRP
exposure limits for occupational/controlled RF
exposure environments at operating duty factors of up
to 50% talk to 50% listen.
Conformité aux normes d’exposition à l’énergie
RF
Cette radio émetteur-récepteur se conforme aux
normes et aux règlements d’exposition à l’énergie
RF :
■
La Commission fé
dérale de la communication des
Etats-Unis, Code de règlements fédéraux (CFR)
Titre 47 Sections 1.1307, 1.1310 et 2.1091 (radios
mobiles) ou 2.1093 (radios portatives).
■
American National St
andards Institute (ANSI) /
Institute of Electrical and Electronic Engineers
(IEEE) C95. 1-1992.
■
Institute of Electrical and Electronic Engineers
(IEEE) C95.1-1999 Edition.
■
La dir
ective européenne 2004/40/EC concernant
les prescriptions minimales de sécurité et de santé relatives à l'exposition des travailleurs aux risques dus aux agents physiques (champs
électromagnétiques).
Cette radio se conforme aux limites d’exposition de
l’IEEE (FCC) et ICNIRP pour les environnements
d’exposition au rayonnement RF professionnel et
contrôlé aux cycles de marche de 50% en mode
transmission et 50% en mode réception.
■
United St
ates Federal Communications Commis-
sion, Code of Federal Regulations; 47 CFR §§
1.1307, 1.1310, and 2.1093.
■
American National St
andards Institute (ANSI) /
Institute of Electrical and Electronic Engineers
(IEEE) C95.1-1992.
■
Institute of Electrical and Electronic Engineers
(IEEE) C95.1-1999 Edition.
uant to part 15 of the FCC
Rules.
10
For your safety
Radio frequency emissions limits in
the USA
CFR Title 47 Par
t 15.19 (a) (1) - Receivers
Part 15 of the FCC Rules imposes RF emission limits
on receivers. This radio complies with Part 15 of the
FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
CFR Title 47 Part 15.19 (a) (3) - All other devices
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions.
(1) This device may not cause harmful interference,
and (2) This device must accept any interference
received, including interference that may cause
undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, purs
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
For yo
ur safety 11
Radio frequency emissions limits in
Canada
IS
EDC warning
This device complies with Innovation, Science and
Economic Development Canada Compliance licenceexempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause
interference, and (2) this device must accept any
interference,including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR
d'Innovation, Sciences et Développement
économique Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux
deux conditions suivantes: (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil
doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Under Innovation, Science and Economic
Development Canada regulations, this radio
transmitter may only operate using an antenna of a
type and maximum (or lesser) gain approved for the
transmitter by Innovation, Science and Economic
Development Canada. To reduce potential radio
interference to other users, the antenna type and its
gain should be so chosen that, the equivalent
isotropically radiated power (e.i.r.p.) is not more than
that necessary for successful communication.
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
12
For your safety
This radio transmi
tter (identify the device by
certification number, or model number if Category II)
has been approved by Industry Canada to operate
with the antenna types listed below with the maximum
permissible gain and required antenna impedance for
each antenna type indicated. Antenna types not
included in this list, having a gain greater than the
maximum gain indicated for that type, are strictly
prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par
son numéro de certification ou son numéro de modèle
s'il fait partie du matériel de catégorie I) a été
approuvé par Industrie Canada pour fonctionner avec
les types d'antenne énumérés ci-dessous et ayant un
gain admissible maximal etl'impédance requise pour
chaque type d'antenne. Les types d'antenne non
inclus dans cette liste, ou dont le gain est supérieur au
gain maximal indiqué, sont strictement interdits pour
l'exploitation de l'émetteur.
ISEDC Radiation Exposure Statement
This equipment complies with ISEDC RF radiation
exposure limits set forth for an uncontrolled
environment. This transmitter must not be co-located
or operating in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with
minimum distance m between the radiator and
your body.
Conformément à la réglementation d'Innovation,
Sciences et Développement économique Canada, le
présent émetteur radio peut fonctionner avec une
antenne d'un type et d'un gain maximal (ou inférieur)
approuvé pour l'émetteur par Industrie Canada.
Dans le but de réduire les risques de brouillage
radioélectrique à l'intention des autres utilisateurs, il
faut choisir le type d'antenne et son gain de sorte que
la puissance isotrope rayonnée équivalente (p.i.r.e.)
ne dépasse pas l'intensité nécessaire à
l'établissement d'une communication satisfaisante.
For yo
ur safety 13
EMC regulatory compliance in
Australia
This product meets all ACMA regulatory requirements
for electromagnetic compat
ibility (EMC). For more
information about EMC compliance, visit the ACMA
website at www.acma.gov.au.
Frequency band reserved for
distress beacons
Frequency band 406
to 406.1 MHz is reserved for use
by distress beacons. Transmissions should not be
made within this frequency band.
I
C
exposition aux radiations
Cet équipement est conforme avec ISEDC les limites
d'exposition aux rayonnements définies pour un
contrôlé environnement.
Cet émetteur ne doit pas être co-localisés ou
fonctionner en conjonction avec une autre antenne ou
émetteur.
Cet équipement doit être installé et utilisé avec un
minimum de m de distance entre le radiateur et
votre corps.
14
For your safety
Australia and New Zealand citizens
band (476.4 to 477.4
MHz)
AS/NZS 4365
deals with the use of frequencies in the
476.425 to 477.400 MHz band. Products capable of
operating in this band have been approved for
operation in the UHF Citizens Band Radio Service
which is licensed in Australia by the ACMA
Radiocommunications (Citizens Band Radio Stations)
Class Licence and in New Zealand by the MED
General User Radio Licence for Citizens Band Radio.
Operation is subject to conditions contained within
those licences.
Repeaters operate by receiving a transmission on one
channel and re-transmitting it on another. Operators
are required to avoid using local repeater input
channels, which will be in the range of 31 to 38, unless
it is intended to use the repeater facility, and to avoid
using local repeater output channels, which will be in
the range 1 to 8, at any time.
No voice transmissions are permitted on data
channels 22 and 23. Equipment meeting this standard
will inhibit voice operation on channels 22 and 23.
In Australia:
■
Except in an
emergency, a CB transmitter must
not be operated on UHF channels 5 and 35.
■ Channel 11 is the customary calling channel for
establishing communications.
■
Channel
40 is the customary road vehicle chan-
nel.
For yo
ur safety 15
Health, safety and electromagnetic
compatibility in Europe
In the European Community, radio
and
telecommunications equipment is regulated by the
Radio Equipment Directive (2014/52/EU).
The requirements of this directive include protection
of health and safety of users, as well as
electromagnetic compatibility.
Intended purpose of product
This product is an FM radio transceiver. It is intended
for radiocommunication in the Private Mobile Radio
(PMR) or Public Access Mobile Radio (PAMR)
services, to be used in all member states of the
European Union (EU) and states within the European
Economic Area (EEA).
Restrictions
This product can be programmed to transmit on
frequencies that are not harmonized throughout the
EU/EEA, and will require a licence to operate in each
member state.
This product can be programmed for frequencies or
emissions that may make its use illegal. Where
applicable, a license must be obtained before this
product is used. All license requirements must be
observed. Limitations may apply to transmitter power,
operating frequency, channel spacing, and emission.
Declaration of conformity
Simplified declarations of conformity appear on
page 72 of this document. To download the formal
declaration of conformity, go to www.taitradio.com/
eudoc.
16
For your safety
Interference with electronic devices
Wa
rning Some electronic devices may be prone to
malfunction due to the lack of protection from RF
energy that is present when your radio is transmitting.
Examples of electronic devices that may be affected
by RF energy are:
■
aircraf
t electronic systems
■
vehicular electronic systems such as
fuel injec-
tion, anti-skid brakes, and cruise control
■
medical devices such as p
acemakers and hearing
aids
■
medical equipment in hospit
als or health care
facilities.
Switch off the radio before boarding an aircraft. Using
your radio while in the air is not permitted.
Consult the manufacturer (or its representative) of any
such electronic devices to determine whether
electronic circuits in those devices will perform
normally when the radio is transmitting.
Warning If you have a pacemaker:
■
immediat
ely turn off the radio if you suspect it is
interfering with the pacemaker
■
keep
the radio at least 6 inches (15 cm) from the
pacemaker while the radio is on
■
use the
radio on the side opposite to the pace-
maker to minimize interference
■ never carry the radio in a
breast pocket.
If there is interference between your hearing aid and
the radio, please discuss an alternative solution with
the hearing aid manufacturer.
For yo
ur safety 17
Potentially explosive atmospheres and
blasting areas
Wa
rning Unless the radio is specifically certified for
use in a potentially explosive atmosphere, turn off the
radio before entering such an atmosphere. An
explosion could cause serious injury or death.
Examples of potentially explosive atmospheres
include filling stations, and any environment where
there are flammable liquids, gases, or dusts.
Warning Turn off the radio before approaching
blasting caps, a blasting area, or any area where you
are instructed to turn off a two-way radio. Obey all
signs and instructions. Interference with blasting
operations could cause serious injury or death.
Radio installation and operation in
vehicles
Wa
rning Keep the radio away from airbags and
airbag deployment areas. Do not install, charge, or
place a radio near such areas. An activated airbag
can propel a portable radio with sufficient force to
cause serious injury to vehicle occupants. An airbag
may not perform to specification if obstructed by a
radio.
Warning To avoid damage to existing wiring, airbags,
fuel tanks, fuel and brake lines, or battery cables, refer
to the installation guide for the radio, and to the vehicle
manufacturer’s manual, before installing electronic
equipment in the vehicle.
Using a handheld microphone or a radio while driving
a vehicle may violate the laws and legislation that
apply in your country or state. Please check the
vehicle regulations in your area.
6-way charger safety information
Wa
rning This device must be connected to an
earthed mains socket-outlet.
Norsk (no): Apparatet må tilkoples jordet stikkontakt.
18
For your safety
Suomi (fi): Laite
on liitettävä
suojamaadoituskoskettimilla varustettuun
pistorasiaan.
Svenska (sv): Apparaten skall anslutas till jordat uttag.
Electromagnetic compatibility in
European vehicles
In the European Community, radio
equipment fitted to
automotive vehicles is regulated by Directive 72/245/
EEC and its amendments. The requirements of this
directive cover the electromagnetic compatibility of
electrical or electronic equipment fitted to automotive
vehicles.
Unapproved modifications or changes
to radio
The radio
is designed to satisfy the applicable
compliance regulations. Do not make modifications or
changes to the radio that are not expressly approved
by Tait. Failure to do so could invalidate compliance
requirements and void the user’s authority to operate
the radio.
Attaching of labels
Wa
rning Do not obstruct the vent hole on the battery
or the vent hole on the radio chassis label. If the vent
on the battery is obstructed, the battery may explode,
causing personal injury and/or damage to property. If
the vent on the radio is obstructed, audio quality and/
or key function may deteriorate and radio seals may
be damaged.
Caution Tait recommends that you do not affix
additional labels to the surfaces between the radio
chassis and the battery. The fit between these
surfaces is intentionally firm and any added thickness
will damage the points of attachment between radio
and battery. Do not obstruct the vent holes (see
For yo
ur safety 19
W
arning above). Do not allow the paper label to
extend beyond the recessed label area or to conceal
relevant product information.
Use of lithium-ion batteries
Wa
rning A damaged battery can cause an explosion
or fire, and can result in personal injury and/or
property damage. To prevent personal injury and/or
damage to property, read the important safety
information supplied with the battery.
Short-circuiting battery contacts
Wa
rning Do not short-circuit the battery contacts,
neither intentionally nor accidentally, e.g. by placing
the battery with conductive materials such as keys or
jewelry inside a pocket or container. Short-circuiting
the battery contacts can heat up the conductive
material and cause personal injury and/or damage to
property.
20
Menu map
Menu map
This section shows
the menus and submenus that may be
programmed for your radio (for radios with display only).
Contact
Favorite Contact List
Contact List
Edit Contact
Delete Contact
View Contact
New Contact
Manual Dial
Ctrl Services
Alert Call
Radio Check
Radio Disable
Radio Enable
Remote Monitor
Message
New Message
Quick Text
Status Message
Inbox
Forward
Reply
Outbox
Drafts
Call Logs
Outgoing
Incoming
Missed
Zone
Scan
Scan On/Off
Scan List
Programming
Channel
Frequency
Slot
Color COde
Tx Contact
Rx Group List
CTCSS
Radio
Radio Alias
Radio ID
Settings
Radio Settings
Talk Around
Power LEvel
Squelch Level
Lone Worker
Backlight
Day/Night Mode
Brightness
Keypad Lock
LED
Tones
Man Down
1
Encrypt
Channel Display
Mode
Language
Radio Password
Optional Key
VOX
Keypad Mode
Vibration
Radio Information
Accessories
GPS
1
Posi
tion View
Time Zone
BT
1
Wo
rk Order
1
. TP3350 only
TP3
3
50 also has Bluetooth
In addition to the TP3300, the
TP3300 and TP3350
Ab
out this guide 21
1About this guide
This user’s
guide provides information about the
DMR conventional and analog portable radios.
®
, GPS, and
man-down
functionality.
Both models are available with the following front
panels:
■
display and 16
keys
■
display an
d 4 keys
■
no
display and no keys
These front panels are interchangeable. Contact your
radio provide for more information.
The radio behavior described in this guide applies to
radios with firmware version v1.01. If your radio does
not operate as you expect, contact your radio provider
for assistance.
Safety warnings used in this
guide
Please follow exactly
any instruction that appears in
the text as an ‘alert’. An alert provides necessary
safety information as well as instruction in the proper
use of the product. This user’s guide uses the
following types of alert:
Warning This alert is used when there is a hazardous
situation which, if not avoided, could result in death or
serious injury.
Caution This alert is used when there is a hazardous
situation which, if not avoided, could result in minor or
moderate injury.
Loading...