Tait TEL0054 Installer and User information

FCC RF Exposure Limits:

T2020-543 radios

Installer Information

Antenna Installation

To comply with FCC RF exposure limits, this product must be
installed using an externally mounted antenna with a gain
specified in the table below. This antenna must not be mounted
at a location such that any person or persons can come closer

WARNING

User Information

Safety Training Information

WARNING

■

It must only be used with authorized accessories and antennas.

than the minimum safe distance to the antenna.

This product generates Radio Frequency energy during
transmissions. It is classified as suitable for occupational use in a
controlled exposure environment. The following conditions
apply to the use of this radio:

■

The operator must ensure that the minimum safe distance between per­sons and the antenna is not exceeded during transmissions.

■

Do not exceed a duty cycle ratio of 50% transmit mode to stand-by or
receive modes. The radio is in transmit mode when the PTT button on
the microphone is pressed and the “TX” annunciator or warning LED
shows.

Antenna Details and Safe Distance Table

Minimum Safe Distance

Inches Metres

Radio Model

T2020-543

Antenna Gain

(dBi)

2.15 20 0.5

5.15 30 0.71