Synology DS220j User Manual

Synology NAS DS220j

Hardware Installation Guide

Table of Contents

Chapter 1: Before You Start

Package Contents 3
Synology DS220j at a Glance 4
Hardware Specication 5
Safety Instructions 6
Spare Parts 7

Chapter 2: Hardware Setup

Tools and Parts for Component Installation 8
Install Drives 8
Start Up Your Synology NAS 10
LED Indicator Table 11

Chapter 3: System Maintenance

Initial Troubleshooting Guide 12

Chapter 4: Install DSM on Synology NAS

Install DSM with Web Assistant 13
Learn More 13

Synology_HIG_DS220j_20190916

2

Chapter

Before You Start

Thank you for purchasing this Synology product! Before setting up your new DS220j, please check the package
contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully
to avoid harming yourself or damaging your Synology NAS.

Note:

All images below are for illustrative purposes only, and may di󰀨er from the actual product.

Package Contents

Main unit x 1 AC power cord x 1

AC power adapter x 1

1

HDD bracket x 1 Screws for HDD bracket x 3 Screws for hard drives x 10

RJ-45 LAN cable x 1

Screws for xing the

Synology case x 3

3

3

Synology DS220j at a Glance

No. Article Name Location Description

1

Status Indicator

Displays the status of the system. For more information, see "LED Indicator
Table".

2

3

4

5

6

7

8

9

10

LAN Indicator

Front Panel

Disk Indicator

Power Button

Fan

LAN Port Connect a network cable here.

USB 3.0 Port Connect external hard drives or other USB devices to the Synology NAS here.

Back Panel

Reset Button

Kensington

Security Slot

Power Port Connect the AC power adapter here.

Displays the status of the network connection. For more information, see "LED
Indicator Table".

Displays the status of the installed drive. For more information, see "LED
Indicator Table".

1. Press to power on the Synology NAS.

2. To power o󰀨 the Synology NAS, press and hold until you hear a beep sound

and the Power LED starts blinking.

Disposes of excess heat and cools the system. If the fan malfunctions, the
Synology NAS will emit a beeping sound.

1. Press and hold until you hear a beep sound to restore the default IP address,
DNS server, and password for the

2. Press and hold until you hear a beep sound, then press and hold again until
you hear three beep sounds to return the Synology NAS to “Not Installed”
status so that DiskStation Manager (DSM) can be reinstalled.

Attach a Kensington security lock here.

admin

account.

4 Chapter 1: Before You Start

Hardware Specication

Item DS220j

Compatible Drive Type 3.5" / 2.5" SATA x 2

Maximum Internal Raw Capacity 32TB (2 X 16TB hard drives)

External Ports USB 3.0 x 2

LAN Port 1GbE (RJ-45) x 1

Size (H x W x D) (mm) 165 x 100 x 225.5

Weight (kg) 0.88

Supported Clients

File Systems

Supported RAID Types

Agency Certications

• External: ext4, ext3, FAT, NTFS, HFS+, exFAT

• Synology Hybrid RAID (1-Disk Fault Tolerance)

• FCC Class B • CE Class B • BSMI Class B

• EAC • VCCI • CCC • RCM • RoHS Compliant

• Mac OS X 10.11 onward

• Basic • JBOD • RAID 0 • RAID 1

HDD Hibernation Yes

Scheduled Power On/O󰀨 Yes

Language Localization

• Line voltage: 100V to 240V AC

• Frequency: 50/60Hz

Environment Requirements

• Operating Temperature: 32 to 104°F (0 to 40°C)

• Storage Temperature: -5 to 140˚F (-20 to 60˚C)

• Relative Humidity: 5% to 95% RH

Note:

Model specications are subject to change without notice. Please refer to

www.synology.com

• Windows 7 and 10

• Internal: ext4

1

for the latest information.

1

The support for exFAT can be enabled after you have purchased and downloaded exFAT Access in Package Center.

5 Chapter 1: Before You Start

Safety Instructions

Keep away from direct sunlight and away from chemicals. Make sure the environment does not
experience abrupt changes in temperature or humidity.

Place the product right side up at all times.

Do not place near any liquids.

Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or
aerosol cleaners.

To prevent the unit from falling over, do not place on carts or any unstable surfaces.

The power cord must plug in to the correct supply voltage. Make sure that the supplied AC voltage is
correct and stable.

To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.

Risk of explosion if battery is replaced with an incorrect type. Dispose of used batteries appropriately.

6 Chapter 1: Before You Start