Symmons SGB-24 User Manual

Wall Mounted Grab Bar, SGB

Print

Reset Form

Specification Submittal

Location:

Feature Highlights

■ ADA compliant wall mounted grab bar

■ Grab bar available in 24, 36 or 42 inch length

■ Tested to meet ADAAG requirements of 250 lbs. pull

force with both ends secured to a wall stud

■ Brushed stainless steel nish

Model Numbers

SGB-24 ............. 24 inch (610 mm) Grab Bar



SGB-36 ............. 36 inch (914 mm) Grab Bar



SGB-42 ............. 42 inch (1067 mm) Grab Bar



Dimensions Wall Mounted Grab Bar, SGB

Grab Bar Length

Model Length

SGB-24 24" (610 mm)

SGB-36 36" (914 mm)

SGB-42 42" (1067 mm)

Compliance

2010 ADA Standards for Accessible Design

Grab bar assembly complies with the applicable
requirements.

Warranty

■ Limited Lifetime - to the original end purchaser in

consumer installations

■ 5 years - for commercial installations

Finish Options / Modifications

Append appropriate -sux to model number

-Brushed stainless steel grab bar (standard)

Reference

grab bar length table

press-on screwless
escutcheon

standard wall stud width

1-1/2" (38 mm)
bar diameter

two (2) spacers

Six (6) #10 x 2-1/2"
(63.5 mm) wood screws

Grab Bar must be secured

with at least two (2) of three (3)
screws at each end.

Note: Dimensions subject to
change without notice.

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone], [phone] ■ Fax: [phone]

©2012 Symmons Industries, Inc. ■ Printed in U.S.A. ■ www.symmons.com ■ [e-mail] ■ 010313

SGB-24........22-7/16" (582 mm)

SGB-36........34-7/16" (887 mm)

SGB-42........40-7/16" (1039 mm)

SGB-24........26-3/16" (666 mm)

SGB-36........38-3/16" (971 mm)

SGB-42........44-3/16" (1123 mm)

1-1/2" (38 mm)

3" (77 mm)
diameter

1-7/8" (x2)

(48 mm)

1-7/16" (x2)

(24 mm)