Important! Prior to connecting the water supply, ensure
supply lines are ushed. Particles can clog lter and result in
malfunction. Excessive particles from supply lines may require
installing a separate ecient lter.
Step 1 Attach faucet to deck (1 hole)
Single hole mount without deck plate
nished deck
front view
Step 2 Connect water supply line
19 mm
OFF
Step 3 Test operation and check for leaks
Step 1 Attach faucet to deck (3 hole)
Three hole mount with deck plate
nished deck
front view
Operation
Sensor range is preset, 1/2 - 4
inches
Place hand under faucet, water will ow
automatically for 10 seconds and shut o.
Auto shut-off, 1/2 to 1 second
Remove hands, water will stop
automatically within 1/2 to 1 second.
Security OFF after 10 seconds
Faucet will automatically shut o aer
continuous water ow for 10 seconds.
Weak or dead battery
LED will ash to signal battery is getting
weak and should be replaced soon.
Page 2Page 2
OFF
2
1
3
4
6
5
solenoid
3 mm
8 mm
Service Instructions
Battery replacement
3 mm
OFF
Cleaning water supply strainer
6 volt
Lithium
battery
Solenoid valve replacement
Sensor replacement
2
sensor
5
6
3
4
OFF
Troubleshooting
No water flow
■ No battery installed, battery connection is loose or battery
power is low.
■ Filter in strainer is clogged. Excessive clogged lter may
require installing of separate ecient lter into supply line.
■ Solenoid valve connector inside faucet is loose.
■ Circuit board is faulty. Do not attempt repair, please
contact Symmons customer service.
■ Solenoid valve is faulty. Do not attempt repair, please
contact Symmons customer service.
7
1
8
OFF
Faucet care
Cleaning surface finish
■ Block sensor to prevent faucet from turning on while cleaning.
■ Clean nish area by using mild soap and water or nonabrasive cleaner and then rinse immediately. A nonabrasive wax may be used to preserve nish area.
Precautions
■ Ensure sensor is not damaged through impact or scratches.
■ Ensure sensor is not blocked or disturbed by any object
with its detection range.
■ Ensure that no strong light source is aimed directly at
sensor or through a mirror.
Parts Assembly Ultra-Sense Lavatory Faucet, S-6060
Part Number SF-231
S-6060 Replacement Parts
lid
gasket
battery pack
sensor mounting
brackets
sensor
socket retainer
solenoid
faucet body
aerator and
removal tool
top lid bolt
3 mm Allen wrench
(included)
deck plate
gasket
anchor bar
spacer
hex nut
anchor bolt
screw
ex hose
strainer/adapter
6 volt
Lithium
battery
8 mm socket
wrench
(not included)
Model: S-6060-SM
single hole mount
Part Number Item
SF-249
SF-2CR5
SF-240
SF-246
SSF-108
SF-181
SF-158
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667,
(781) 848-2250 M-F 7:30 am - 7:00 pm EST
or check our website at www.symmons.com for a
list of Symmons distributors.