Symbol Technologies DM4046 Addendum

Hearing Aid Compatibility

This product is marked HAC showing compliance with the requirements of FCC Part 68 and CS03-Part 5.

Frequency Interference

for Home or Office Use

has been tested and found to comply with the limits B digital device pursuant to Part 15 of the Federal

Commissions (FCC) Rules and Regulation. are designed to provide reasonable protection

interference when the equipment is operated in environment. This equipment generates, uses and radio frequency energy and, if not installed and

with the instruction manual, may cause to radio communications.

is no guarantee that interference will not occur installation. If the equipment does cause harmful

to radio or television reception, which can be by turning the equipment off and on, the user is

to try to correct the interference by one or more of measures:

or relocate the receiving antenna.

the separation between the equipment

the equipment into an outlet on a circuit different that which the receiver is connected.

Interference -Canada

B digital apparatus meets the requirements of the Interference-Causing Equipment Regulations.

numérique de la Classe B respecte toutes les

du Reglement sur le Materiél Brouilleur du Canada.

Exposure Guidelines

phones with all reported Specific Absorption Rate evaluated as in compliance with the FCC RF

. SAR information on NetVision phones is on FCC and can be found under the Display Grant

http://www.fcc.gove/oet/fccid.

European Economic Area

The European variant is intended for use throughout the European Economic area, however authorization for use restricted as follows:

•European standards dictate maximum radiated transmit power of 100 mW, EIRP and frequency range 2.400 - 2.4835 GHz

•France, the equipment is to be restricted to the 2.4465 - 2.4835 GHz frequency range

•Belgium outside, the equipment is to be restricted to the 2.460 - 2.4835 GHz frequency range

•Operation in Italy requires a user license.

Hereby, Symbol Technologies, Inc., declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www2.symbol.com/doc/.

Laser Devices

(Only applies to Data Phone-4046)

Symbol products using lasers comply with US 21 CFR1040.10, Subchapter J and IEC825/EN 60 825 (or IEC825-1/EN 60-825-1, depending on the date of manufacture). The laser classification is marked on one of the labels on the product.

Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:

Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous visible or invisible laser light exposure.

Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.

Samples of Laser Warning Labels

LASER LIGHT DO NOT STARE INTO BEAM

630 - 680nm LASER 1.0mW MAX OUTPUT

CLASS II LASER PRODUCT

LASER LIGHT - DO NOT STARE INTO BEAM

CLASS 2 LASER PRODUCT

LASERLICHT-NICHT IN DEN STRAHL BLICKEN

LASER KLASSE 2

LUMIERE LASER - NE PAS REGARDER DANS LE FAISCEAU

APPARIEL A LASER CLASS 2 630 - 680 nm. 1mw

CAUTION: LASER LIGHT WHEN OPEN. DO NOT STARE INTO BEAM.

ATTENTION - LUMIERE LASER EN CAS D'OUVERTURE NE PAS REGARDER DANS LE FAISCEAU. VORSICHT - LASERLICHT, WENN ABDECKUNG GOFFNET. NICHT IN DEN STRAHL BLICKEN.

Customer Support

Symbol Technologies provides its customers with prompt and accurate customer support. Use the Symbol Support Center as the primary contact for any technical problem, question or support issue involving Symbol products. If the Symbol Customer Support specialists cannot solve a problem, access to all technical disciplines within Symbol becomes available for further assistance and support. Symbol Customer Support responds to calls by email, telephone or fax within the time limits set forth in individual contractual agreements. When contacting Symbol Customer Support, please provide the following information:

•serial number (MAC address) of unit

•part number or product name.

North American Contacts

Inside North America, contact Symbol at: Symbol Technologies, Inc.

One Symbol Plaza

Holtsville, New York 11742-1300

Telephone: 1-631-738-2400 / 1-800-SCAN 234 Fax: 1-631-738-5990

Symbol Support Center:

Telephone: 1-800-653-5350

Fax: (631) 563-5410

Email: support@symbol.com

International Contacts

Outside North America, contact Symbol at: Symbol Technologies Technical Support

12 Oaklands Park

Berkshire, RG41 2FD, United Kingdom

Tel: 011-44-118-945-7000 or 1-631-738-2400 ext. 6213

Product Information and Documentation

Documentation for NetVision Products is available online at http://www.symbol.com/services/downloads/nvdoclist.html.

No part of this publication may be modified or adapted in any way, for any purposes without permission in writing from Symbol Technologies, Inc. (Symbol). The material in this documentis subject to change without notice. Symbol reserves the right to make changes to any product to improve reliability, function, or design. No license is granted, either expressly or by implication, estoppel,

or otherwise under any Symbol Technologies, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Symbol products.

Symbol, the Symbol logo and Spectrum24 are registered trademarks

of Symbol Technologies, Inc. Other product names mentioned in this manual may be trademarks or registered trademark of their respective companies and are hereby acknowledged. IBM is a registered trademark of International Business Machine Corporation. Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Patents

This product is covered by one or more of the following U.S. and foreign Patents: U.S. Patent No.

4,496,831; 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095; 4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532; 4,923,281; 4,933,538; 4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520; 5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904; 5,216,232; 5,229,591; 5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553; 5,262,627; 5,262,628; 5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786; 5,304,788; 5,306,900; 5,321,246; 5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055; 5,399,846; 5,408,081; 5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893; 5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322; 5,519,577; 5,528,621; 5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070; 5,589,679; 5,589,680; 5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803; 5,675,139; 5,693,929; 5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043; 5,745,794; 5,754,587; 5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811; 5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064; 5,850,078; 5,861,615; 5,874,720; 5,875,415; 5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059; 5,923,025; 5,929,420; 5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,031,830; 6,036,098; 6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,068,190; 6,082,621; 6,084,528; 6,088,482; 6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814; 6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681; 6,209,788; 6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061; 6,250,551; 6,295,031; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918; D370,478; D383,124; D391,250; D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035; D430,158; D430,159; D431,562; D436,104.

Invention No. 55,358; 62,539; 69,060; 69,187 (Taiwan); No. 1,601,796; 1,907,875; 1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/03938; Italy 1,138,713

Symbol Technologies, Inc. One Symbol Plaza Holtsville, NY 11742-1300

*72-51346-01*

NetVision Phone®

Regulatory Specifications

Regulatory Compliance

Symbol RF products are designed to be compliant with the rules and regulations in the locations into which they are sold and will be labeled as required. The majority of Symbol RF devices are type approved and do not require the user to obtain license or authorization before using the equipment. Any changes or modifications to Symbol Technologies equipment not expressly approved by Symbol Technologies could void the user’s authority to operate the equipment.

Applying the Regulatory Country Stamp

A regulatory label is applied in the battery compartment of the NetVision Phone. The regulatory label signifies that the NetVision Phone is approved for use in the following countries:

•United States

•Canada

•Australia

•Japan (approval pending)

•Mexico (approval pending)

•Europe

Austria, Belgium, Croatia, Denmark, Estonia, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Liechtenstein, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom.

For approved countries other than those listed above, a sheet of adhesive country stamps may be enclosed within the NetVision Phone package.

To Apply the Country Stamp:

1.Peel the stamp appropriate to the country where the NetVision Phone is used.

2.Apply the country stamp in the space provided on the regulatory label located in the battery compartment.

Operation of the device without a regulatory label or the correct country stamp is illegal.

72-51346-01 Revision B