Symbol Technologies 4121GPRS, 41210000 Regulatory information

Licensing,PatentandRegulatoryInformation

DIADIVTerminal

Regulatory Information

All Symbol devices are designed to be compliant with rules and regulations in the countries listed in sections 4.5 of Exhibit 2 of the Agreement and will be labeled as required.

Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment.

Antenna's, use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could cause damage and may violate regulations.

Radio Modules

This device contains approved radio modules. These modules are identified below.

•Symbol Compact Flash RLAN (11Mbps DSSS) radio card, Type: LA-4137

•Motorola Triband GSM GPRS G18 module, or Motorola CDMA C18 module

•Symbol BluetoothTM Module, Type: 21-64381.

This device incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates on the correct channels for the particular country of use.

This device contains a Bluetooth qualified module, Bluetooth ID: B01285 or B00813.

Country Approvals

Regulatory markings are applied to the device signifying the radio (s) are approved for use in the following countries: United States, Canada, Australia, Japan & Europe 1.

Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings. This is available at http://www2.symbol.com/doc/.

Note 1: For 2.4GHz Products: Europe includes, Austria, Belgium, Czech Republic, Croatia, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

Operation of the device without regulatory approval is illegal.

Health and Safety Recommendations

Ergonomic Recommendations

Caution: Even the best-designed products can be a potential source of injury/illness if used incorrectly. In order to avoid or minimize risk of ergonomic injury, follow the general recommendations below. Consult with your local Health & Safety Manager to ensure that you are meeting your company’s safety programs to prevent employee injury.

•Reduce or eliminate repetitive motion.

•Maintain a neutral posture and avoid awkward positions.

•Reduce or eliminate excessive force.

•Keep objects that are used frequently within easy reach.

•Perform tasks at correct heights.

•Reduce or eliminate vibration.

RevisionC—June2004

72-63596-01

Forpatentinformation,goto:com/patents.symbol.www. Patents

com.symbol.http://www Holtsville,.Y.N11742-1300 OneSymbolPlaza SymbolTechnologies,.Inc

arehereby.acknowledged mentionedinthismanualmaybetrademarksorregisteredtrademarksoftheirrespectivecompaniesand SymbolandtheSymbollogoareregisteredtrademarksofSymbolTechnologies,.IncOtherproductnames

Symbolreservestherighttomakechangestoanyproducttoimprovereliability,function,or.design

11204-01,2001-11204-02and2001-11204-03,datedFebruary13,.2003 productliabilityandlicensegrants,willbeinaccordancewithPurchaseAgreementsnumber:2001SymbolandUPS'rightsandobligationswithrelationtotheDIADIVproduct,includingwithoutlimitation ©2003-2004SYMBOLTECHNOLOGIES,.INCAllrights.reserved

•Reduce or eliminate direct pressure.

•Provide adjustable workstations.

•Avoid static exertions.

•Provide adequate clearance.

•Provide a suitable working environment.

•Improve work procedures.

•Take periodic rest breaks.

For Vehicle installations and use

1.An air bag inflates with great force. DO NOT place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result.

2.Position your device within easy reach. Be able to access your device without removing your eyes from the road.

3.Do not take notes or use the device while driving to the point of distracting from driving. Reading or Jotting down text takes attention away from your primary responsibility, driving safely.

Cell Phone/Terminal Warnings

Effect on Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles (including safety systems). Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Safety on Aircraft

You are required to switch OFF mobile phones when on board an aircraft as operation may be dangerous and illegal.

Pacemakers

It is recommended by pacemaker manufacturers that a minimum of 15cm (6 inches) be maintained between a handheld wireless phone and a pacemaker to avoid any possible interference with the pacemaker. These recommendations are consistent with independent research and recommendations by Wireless Technology Research.

Persons with Pacemakers:

•Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.

•Should not carry the device in a breast pocket.

•Should use the ear furthest from the pacemaker to minimise the potential for interference.

•If you have any reason to suspect that interference is taking place, turn OFF your device.

Radio Frequency Interference Requirements

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna

•Increase the separation between the equipment and receiver

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

•Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio Transmitters

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation.

Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met.

Marking and European Economic Area (EEA)

The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions:

•Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz

•France, equipment is restricted to 2.4465 -2.4835 GHz frequency range

•Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range

•Italy requires a user license for outside usage.

Bluetooth for use through the EEA have the following restrictions:

•Maximum radiated transmit power of 10mW EIRP in the frequency range 2.400 -2.4835 GHz

•Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range

•Italy requires a user license for outside usage.

In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:

ENGLISH	HEBREW
CLASS 1	CLASS 1 LASER PRODUCT
CLASS 2	LASER LIGHT
	DO NOT STARE INTO BEAM
	CLASS 2 LASER PRODUCT

DANISH / DANSK		ITALIAN / ITALIANO
KLASSE 1	KLASSE 1 LASERPRODUKT	CLASSE 1	PRODOTTO AL LASER DI CLASSE 1
KLASSE 2	LASERLYF	CLASSE 2	LUCE LASER
	SE IKKE IND I STRÅLEN		NON FISSARE IL RAGGIOPRODOTTO
	KLASSE 2 LASERPRODUKT		AL LASER DI CLASSE 2

DUTCH / NEDERLANDS		NORWEGIAN / NORSK
KLASSE 1	KLASSE-1 LASERPRODUKT	KLASSE 1	LASERPRODUKT, KLASSE 1
KLASSE 2	LASERLICHT	KLASSE 2	LASERLYS IKKE STIRR INN I LYSSTRÅLEN
	NIET IN STRAAL STAREN		LASERPRODUKT, KLASSE 2
	KLASSE-2 LASERPRODUKT

FINNISH / SUOMI		PORTUGUESE / PORTUGUÊS
LUOKKA 1	LUOKKA 1 LASERTUOTE	CLASSE 1	PRODUTO LASER DA CLASSE 1
LUOKKA 2	LASERVALO	CLASSE 2	LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
	ÄLÄ TUIJOTA SÄDETTÄ		PRODUTO LASER DA CLASSE 2
	LUOKKA 2 LASERTUOTE

FRENCH / FRANÇAIS		SPANISH / ESPAÑOL
CLASSE 1	PRODUIT LASER DE CLASSE 1	CLASE 1	PRODUCTO LASER DE LA CLASE 1
CLASSE 2	LUMIERE LASER	CLASE 2	LUZ LASER
	NE PAS REGARDER LE RAYON FIXEMENT		NO MIRE FIJAMENTE EL HAZ
	PRODUIT LASER DE CLASSE 2		PRODUCTO LASER DE LA CLASE 2

GERMAN / DEUTSCH		SWEDISH / SVENSKA
KLASSE 1	LASERPRODUKT DER KLASSE 1	KLASS 1	LASERPRODUKT KLASS 1
KLASSE 2	LASERSTRAHLEN	KLASS 2	LASERLJUS STIRRA INTE MOT STRÅLEN
	NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN		LASERPRODUKT KLASS 2
	LASERPRODUKT DER KLASSE 2

Scanner Labeling

Statement of Compliance

Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC. Declaration of Conformities may be obtained from http://www2.symbol.com/doc/.

Other Countries:

Mexico	- Restrict Frequency Range to: 2.450	- 2.4835 GHz.
Israel	- Restrict Frequency Range to: 2.418	- 2.457 GHz.
Sri Lanka	- Restrict Frequency Range to: 2.400	- 2.430 GHz.

Hearing Aids

The device may interfere with some hearing aids. In the event of interference you may want to consult your hearing aid supplier to discuss solutions.

Other Medical Devices

The device transmits radio frequency energy and has the potential to interfere with inadequately protected medical devices. Consult your physician or the manufacturer of the device to see if the particular device has sufficient protection.

It is good practice to turn OFF the device within a hospital or other medical facility where sensitive medical equipment is in use. In some countries, this is a legal requirement applying to all mobile phones and related equipment.

Warning Notices

Please observe all warning notices with regard to the usage of mobile phones and/or terminals.

Potentially Hazardous Atmospheres

You are advised not to use this device at a refuelling point. You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine.

FCC RF Exposure Guidelines

Safety Information

The device complies with Internationally recognised standards covering Specific Absorption Rate (SAR) related to human exposure to electromagnetic fields from radio devices.

Reducing RF Influence - Use Properly

It is advisable to use the device only in the normal operating position.

Handheld Devices:

This device was tested for typical body-worn operation. The use of third-party belt-clips, holsters, and similar accessories should not contain metallic components in its assembly. The use of these accessories that do not satisfy these requirements may not comply with FCC RF exposure compliance requirements, and should be avoided.

Laser Devices

Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825- 1:1994+A11:1996. The laser classification is marked on one of the labels on the device.

Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement is required to comply with US and international regulations:

Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure.

Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.