Symbol Technologies 2121160 Regulatory Insert

CE .NET

®

Licensing, Patent and Regulatory Information

For Embedded Windows

MC3000 Series

Outside Spain

Inside Spain

of said Product or the fair market value of said service , except in instances of injury to persons or property.

Revision A — November 2004
72-68903-01

or the latest version of this guide go to: http://www.symbol.com/manuals.

F

[phone]
Contact local distributor or call

[phone] Outside US
1-800-347-0178 Inside US

Outside Canada 905-629-7226

Canada Inside Canada 1-866-416-8545

1-631-738-2400

Distributor Operations
Europe/Mid-East

Sales Support
Latin America

Sweden/Sverige 84452900 [phone]

South Africa 11-8095311 Spain/España 91 324 40 00
Netherlands/Nederland 315-271700 Norway/Norge [phone]
Italy/Italia 2-484441 Mexico/México 5-520-1835
France 01-40-96-52-21 Germany/Deutchland 6074-49020
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
Australia 1-800-672-906 Austria/Österreich 1-505-5794-0
United Kingdom 0800 328 2424 Asia/Pacific [phone]

United States 1-800-653-5350

there is a problem with the equipment, they will contact the Symbol Support Center:
If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support. If
Before you use the unit, it must be configured to operate in your facility’s network and run your applications.

Service Information

damages to Buyer or others resulting from the use of any Product or service furnished hereunder shall in no way excee d the purchase price
indirect or consequential damages ar ising out of or in connection with the use or performance of the Product or service. Seller’s liability for
The stated express warranties are in lieu of all o bligations or liabilities on the part of Seller for damages, including but n ot limited to, special,
PRODUCTS, SOME EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY.
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS. IN SUCH STATES OR COUNTRIES, FOR SUCH
SOME STATES OR COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR
USE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD.
PRODUCTS FURNISHED HEREUNDER INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
EXCEPT FOR THE WARRANTY OF TITLE AND THE EXPRESS WARRANTIES STATED ABOVE, SELLER DISCLAIMS ALL WARRANTIES ON
or consumable items, such as batteries, supplied with the Prod uct.
environmental parameters set forth in the applicable Product specification; nor shall the above warranty provisions app ly to any expendable
to unusual physical or electrical stress, abuse, or accident, or forces or exposure beyond normal use within the specified operat ional and
Symbol, or failure to perform oper ator handling and scheduled maintenance instructions supplied by Seller; (iii) which has been subjecte d
tear, misuse, negligence, improper storage, water or other li quids, battery leakage, use of parts or accessories not approved or suppl ied by
or modified, except by Seller’s authorized service personnel; (ii) in which the defects or damage to the Product result from normal wear and
(F) Warranty Provisions The above warranty provisions shall not apply to any P roduct (i) which has been repaired, tampered with, altered
or replaced by Seller.
in Section C above, the aforementioned provisi ons do not extend the original warranty period of any Product that had either been repaired
(E) Original Warranty Period Except for the warranty applying solely to the repai red component arising from a repair service as provided
the software, if any, installed by Seller during manufacture o f the Product.
software programs, data or removable data storage media, or the restoration or reinstallation of any software programs or data other than
repair. No charge will be made to Buyer for replacement parts for warranty repa irs. Seller is not responsible for any damage to or loss of any
where Seller determines there is no de fect (“No Defect Found”), or for product returned that Seller determines is not eligible for warranty
return shipment to the Customer will be at Seller's expense. Customer shall be responsible for return shipment charges f or product returned
Seller authorization. Customer is responsible for shipment to the Seller and assum es all costs and risks associated with this transportation;
Seller for defective hardware Products is limi ted to repair or replacement (at Seller’s option) on a “return to service depot” basis with prior
products and that have been tested as meeting applicable specifications for equivalent new material and Products. The sole obli gation of
(D) Product Service Products may be serviced or manufactured wit h parts, components, or subassemblies that originate from returned
whichever is longer.
of the Product for a period of thirty (30) days from the shipment date of the repaired Product, or until the end of the original warranty period,
covered by warranty, the repair services provided are warranted against de fects in workmanship and materials on the repaired component
(C) Repair of Symbol-branded hardware For repairs on Symbol-branded hardware Products under this Agreement, including repairs
new or originate from returned uni ts under the conditions set forth in subsection D below.
are warranted against defects in workmanship and materials for a period of thirty (30) days fr om the date of shipment. Spare parts may be
(B) Spare Parts Spare parts (i.e. parts, components, or subassemblies sold by Seller for use in the service and maintenance of Products)
accompanying software license.
reconditioned or upgraded products, shal l be as provided in the applicable Product specification in effect at the time of purc hase or in the
systems, Product modified or designed to meet specific customer specifications (“Custom Products”), remanufactured products, and
unmodified and is operated under no rmal and proper conditions. Warranty provisions and durations on software, integrated inst alled
a period of twelve (12) months from the date of shipment, unless otherwise provided by Seller in writing, provided the Product remains
(A) Warranty Symbol Technologies (hereafter “Seller”) hardware Products are warranted against defects in workmanship and materials for

Warranty

© 2004 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability, function, or design.
Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product,
circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or patent,
covering or relating to any combination, system, apparatus, machine, material, method, or process in which Symbol
products might be used. An implied license exists only for equipment, circuits, and subsystems contained in Symbol
products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names mentioned
in this manual may be trademarks or registered trademarks of their respective companies and are hereby
acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300

http://www.symbol.com

Patents

This product is covered by one or more patents listed on the website:
For patent information go to: http://www.symbol.com/patents

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below.

Consult with your local Health & Safety Manager to ensure that you are adhering to your company's safety
programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used frequently within easy reach

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

• Provide adequate clearance

• Provide a suitable working environment

• Improve work procedures.

Regulatory Information

This document supports all MC30XX product configurations.

For use only with Symbol approved and UL LISTED MC30XX mobile computers, Symbol approved and UL LISTED
MC30XX accessories and/or Symbol approved and UL LISTED MC30XX battery packs.

All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and will be labeled
as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol
Technologies, could void the user's authority to operate the equipment.

Radio Modules

This device can contain the following approved radio modules. These modules are identified below:
Wireless Local Area Network:

• Symbol Bluetooth Module 21-64381.

• Symbol 21-21160*, 802.11abg DSSS radio card.

Wireless Wide Area Network:

• Siemens MC46 - GSM/GPRS 850/1800/1900.

• Siemens MC45 - GSM/GPRS 900/1800/1900.

• Sierra Wireless EM3420 CDMA2000-1X dual band 800/1900) radio card.

*This device can incorporates the International Roaming feature (IEEE802.11d) which will ensure the product operates
on the correct channels for the particular country of use.

Power Supply

Use only a Symbol-approved power supply output rated 5.4 Vdc and minimum 3A. The power supply is certified to
EN60950 with SELV outputs. Use of alternative power supply will invalidate any approval given to this device and may
be dangerous.

Benutzen Sie nur eine Symbol Technologies genehmigt in den Ausgabe: 11-16Vdc und minimum 2A. Die
Stromversorgung ist bescheinigt nach EN60950 mit SELV Ausgaben.

FCC Exposure Guidelines

Safety Information

The device complies with Internationally recognized standards covering Specific Absorption Rate (SAR) related to
human exposure to electromagnetic fields from radio devices.

Reducing RF Exposure - Use Properly

It is advisable to use the device only in the normal operating position and it is recommended that no part of the human
body be allowed to come too close to the antenna during operation of the equipment.

Handheld Devices

This device was tested for typical handheld operation. A minimum separation distance of 2 cm must be maintained
between this device and the body. The use of third-party belt-clips, holsters, and similar accessories should not contain
metallic components in its assembly. The use of these accessories that do not satisfy these requirements may not
comply with FCC RF exposure compliance requirements, and should be avoided.

Laser Devices

Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-1:1994+A11:1996. The laser
classification is marked on one of the labels on the device.

Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following
statement is required to comply with US and international regulations:

Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in

hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the
sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not
known to be harmful.

Scanner Labeling

Radio Frequency Interference Requirements

Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.

Radio Frequency Interference Requirements - Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Radio Transmitters

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Label Marking: The Term “IC:” before the radio certification only signifies that Industry Canada technical specifications
were met.

the instructions, may cause harmful interference to radio communications. However there is no

Battery Information

Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry.
However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors
affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur. Store
batteries discharged in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of metallic
parts and electrolyte leakage. When storing batteries for one year or longer, they should be charged and discharged at
least once a year. If an electrolyte leakage is observed, avoid any contact with affected area and properly dispose of
the battery. Batteries must be charged within the 32° to 104° F (0° to +40° C) ambient temperature range.
Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Symbol batteries is 30 days, regardless if the battery was purchased separately or
included as part of the mobile computer or bar code scanner. For more information on Symbol batteries, please visit:
http:/mysymbolcare.symbol.com/battery/batbasics1.html

Laser Labels

In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:

ENGLISH HEBREW

CLASS 1 CLASS 1 LASER PRODUCT
CLASS 2 LASER LIGHT

DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT

DANISH / DANSK ITALIAN / ITALIANO

KLASSE 1 KLASSE 1 LASERPRODUKT CLASSE 1 PRODOTTO AL LASER DI CLASSE 1
KLASSE 2 LASERLYF CLASSE 2 LUCE LASER

SE IKKE IND I STRÅLEN NON FISSARE IL RAGGIOPRODOTTO
KLASSE 2 LASERPRODUKT AL LASER DI CLASSE 2

DUTCH / NEDERLANDS NORWEGIAN / NORSK

KLASSE 1 KLASSE-1 LASERPRODUKT KLASSE 1 LASERPRODUKT, KLASSE 1
KLASSE 2 LASERLICHT KLASSE 2 LASERLYS IKKE STIRR INN I LYSSTRÅLEN

NIET IN STRAAL STAREN LASERPRODUKT, KLASSE 2
KLASSE-2 LASERPRODUKT

FINNISH / SUOMI PORTUGUESE / PORTUGUÊS

LUOKKA 1 LUOKKA 1 LASERTUOTE CLASSE 1 P RODUTO LASER DA CLASSE 1
LUOKKA 2 LASERVALO CLASSE 2 LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO

ÄLÄ TUIJOTA SÄDETTÄ PRODUTO LASER DA CLASSE 2
LUOKKA 2 LASERTUOTE

FRENCH / FRANÇAIS SPANISH / ESPAÑOL

CLASSE 1 PRODUIT LASER DE CLASSE 1 CLASE 1 PRODUCTO LASER DE LA CLASE 1
CLASSE 2 LUMIERE LASER CLASE 2 LUZ LASER

NE PAS REGARDER LE RAYON FIXEMENT NO MIRE FIJAMENTE EL HAZ
PRODUIT LASER DE CLASSE 2 PRODUCTO LASER DE LA CLASE 2

GERMAN / DEUTCH SWEDISH / SVENSKA

KLASSE 1 LASERPRODUKT DER KLASSE 1 KLASS 1 LASERPRODUKT KLASS 1
KLASSE 2 LASERSTRAHLEN KLASS 2 LASERLJUS STIRRA INTE MOT STRÅLEN

NICHT DIREKT IN DEN LASERSTRAHL SCHAUEN LASERPRODUKT KLASS 2
LASERPRODUKT DER KLASSE 2

CE Marking and European Economic Area (EEA)

RLAN's (2.4GHz) for use through the EEA have the following restrictions:

• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz

• France, equipment is restricted to 2.4465 -2.4835 GHz frequency range

• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range

• Italy requires a user license for outside usage.

Bluetooth™ for use through the EEA have the following restrictions:

• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz

• Belgium outside usage, the equipment is restricted to 2.460 -2.4835 GHz frequency range

• Italy requires a user license for outside usage.

Statement of Compliance

Symbol Technologies, Inc., hereby, declares that this device is in compliance with the essential requirements and other
relevant provisions of Directives 1999/5/EC, 89/336/EEC and 73/23/EEC. Declaration of Conformities may be obtained
from: http://www2.symbol.com/doc/

Other Countries

Mexico - Restrict Frequency Range to: 2.450 - 2.4835 GHz.
Israel - Restrict Frequency Range to: 2.418 - 2.457 GHz.
Sri Lanka - Restrict Frequency Range to: 2.400 - 2.430 GHz.