Symbol Technologies 2090 Users Guide

SYMBOL MT

2000

Quick Start Guide

Series

http://www.motorola.com/mt2070
http://www.motorola.com/mt2090

POST IN WORK AREAPOST IN WORK AREA

Refer to User Guide for more information

8

9

Insert Scanner in Cradle

Desk Cradle

1

2

3

4

5

10

11

12

13

14

15

1 Left soft & ALT key
2 Tab & * key

6

7

3 Keypad
4 Orange key
5 Blue key
6 Battery
7 Tether Plate
8 LED Indicator
9 Scan Window
10 4-way Navigation key

1 1 Right soft & CTRL key

12 Cold boot trigger
13 LED Indicator (MT2090 Only)
14 Enter key
15 Scan Trigger

Wall Cradle

Forklift Cradle

BATTERY INSERTION

1 2

CONNECTIONS

Cradle Cable Connections

RS-232

BATTERY REMOVAL

1

2

HOST INTERFACES

Keyboard Wedge

3

Host

Power

Scanner Cable Connection

(USB & RS-232 only)

NOTE: Cables may vary depending on configuration. When using an external power supply, insert the
power cable into the cradle first, then insert the host cable. Connect the power cable to an AC outlet last.

USB

OR

IBM 46XX

OR

TROUBLESHOOTING

Refer to the Symbol MT2000 Series User Guide Troubleshooting section for further information.

Scanner not working

No power to scanner

Check battery

Scanner decoding bar code, but data not transmitting to host

Scanner not paired to host-connected cradle

Pair the scanner to the cradle (using the
PAIR bar code on the cradle)

NOTE: If data is still not transmitting to host, it may be necessary to recycle power on the cradle.

NOTE: Under certain circumstances, a fully discharged battery can take up to 30
minutes to charge before the scanner is operational. Refer to the User Guide for

detailed information.

Cradle not programmed for correct host interface

Check scanner host parameters or
edit options

Interface cable is loose

Check for loose cable
connections

Scanner not decoding bar code

Scanner not programmed

for bar code type

Ensure scanner is programmed
to read type of bar code being
scanned

Bar code unreadable

Ensure bar code is not defaced;
try scanning test bar code of same
bar code type

Scanned data incorrectly displayed on host

Paired cradle host communication parameters do not match the host’s parameters

Check cradle host parameters or edit options

Scanning application is not running

From the Home screen display on the
scanner, select Scan Item to run the
scanning application

RS-232 Host Types

STANDARD RS-232

ICL RS-232

SYMBOL MT2000 SERIES PROGRAMMING BAR CODES

Host Types Host Mode

Keyboard Wedge Host Types

CABLE PRIORITY

IBM PC/AT and IBM PC COMPATIBLE

Radio Communications Host Types

WIRELESS ONLY

Miscellaneous

CABLE ONLY

NIXDORF RS-232 MODE B

NIXDORF RS-232 MODE A

FUJITSU RS-232

CRADLE HOST

BLUETOOTH KEYBOARD EMULATION (HID SLAVE)

SERIAL PORT PROFILE (SLAVE)

Set Defaults

Note: Paired scanners disconnect from the cradle
when Set Defaults is scanned.

SET DEFAULTS

Unpairing/Disconnection

UNPAIR/DISCONNECT

USB Host Types

HID KEYBOARD EMULATION

ACTIVESYNC HOST

OPOS/JPOS

IBM HAND-HELD USB

IBM 46XX Host Types

PORT 5B

SERIAL PORT PROFILE (MASTER)

PORT 9B

Scan to Add an Enter Key
(Carriage Return/Line Feed)

SCAN OPTIONS

<DATA><SUFFIX>

ENTER

SYMBOL MT

注 意：打开时及联锁失效时有激光辐射 勿直视光束

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Ce dispositif est conforme à la norme CNR-210 d'Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes: (1) le dispositif ne
doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y
compris un brouillage susceptible de provoquer un fonctionnement indésirable.

Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada
technical specifications were met.

Marking and European Economic Area (EEA)

The use of 2.4GHz RLAN's, for use through the EEA, have the following restrictions:

• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz.

• France, outside usage is restricted to 2.4 - 2.454 GHz.

• Italy requires a user license for outside usage.

The use of 5GHz RLANs has varying restrictions for use within the EEA; please refer to the Motorola/Symbol
Declaration of Conformity (DoC) for details at http://www2.symbol.com/doc/.
Bluetooth® Wireless Technology for use through the EEA has the following restrictions:

• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz

2000

Series

DESK-TO-WALL MOUNT CRADLE CONVERSION

(MT2090 only)

POST IN WORK AREAPOST IN WORK AREA

SCANNER INDICATIONS

Scanner Beeper Indications

Standard Use

Low-medium-high beeps

Power up

Short low-high beeps

Scanner has paired with
the cradle

Parameter Menu Scanning

High-low-high-low beeps

Normal beep

Bar code decoded [if
decode beeper enabled]

Short high-low beeps

Scanner has unpaired
with the cradle

Long low-high beeps

4 long low beeps

Transmission error
detected; data is ignored

Long low-high beeps or
Long low-high-low-high beeps

Unsuccessful pairing attempt

NOTE: When mounting a cradle on a wall, ensure the Wall Mount Conversion Dial on the back of the cradle is in the correct position before mounting. Refer to the User Guide for detailed information about single slot, four slot and forklift cradles.

Scanner LED Indications

Waste Electrical and Electronic Equipment (WEEE)

Standard Use

Off

No power applied to scanner (battery
discharged or removed); scanner
is in low power and ready to scan;
or, battery is fully charged and scanner
is ready to scan

Green

Bar code successfully
decoded

Red

Data transmission
error or scanner malfunction

Charging Use

Green Flash

Successful program exit with change
in the parameter setting

Input error, incorrect programming
sequence, or Cancel bar code scanned

Scanner charging
(when cradle is
powered from external
power supply)

Scanner Display Indications

Battery Strength Battery Charging/AC Power Wireless Signal Strength

Low battery; recharge Low battery

=

NOTE: If this icon displays in red, the scanner
battery is critically low and must be recharged

Battery 25% full

=

Battery 50% full

=

Battery 75% full

=

Battery full

=

RECOMMENDED USAGE GUIDE -

=

Battery 25% full

=

Battery 50% full

=

Battery 75% full

=

Battery full

=

OPTIMUM BODY POSTURE

Battery Problem

Battery fault

=

?

Battery fault/AC power

=

?

applied

Connection Icons

Bluetooth active

=

(STB2078 only)

RS-232 cable attached

=

R

USB cable attached

=

U

No signal or

=

not associated

Very low signal

=

Low signal

=

Medium signal

=

=

Good signal

Excellent signal

=

Software Support

Motorola Enterprise Mobility wants to ensure that customers have
the latest entitled software at the time of device* purchase in
order to keep the device operating at peak performance levels.
To confirm that your Motorola device* has the latest entitled
software available at the time of purchase, visit
http://www.motorola.com/enterprisemobility. Check for the
latest software from Support > Enterprise Mobility Products,
or search for the device and select Support > Software Downloads.

If your device does not have the latest entitled software as of
your device purchase date, e-mail Motorola at
[e-mail] and ensure you include
the following essential device information:

• Model number

• Serial number

• Proof of purchase

• Title of the software download you are requesting.

If it is determined by Motorola that your device
is entitled to the latest version of software, as
of the date you purchased your device, you will
receive an e-mail containing a link directing
you to a Motorola Web site to download the
appropriate software.

* This applies to Motorola Mobile Computing
devices and select Advanced Data Capture
devices.

Low scanning Extended range scanning

Alternate left
and right knees

Avoid extreme wrist angles

Avoid bending and reaching

AVOID BENDING

Upright body posture

AVOID EXTREME

WRIST ANGLES

SYMBOL MT

This device is approved under the Symbol Technologies brand: Symbol Technologies, Inc., is the
Enterprise Mobility business of Motorola, Inc. (“Motorola”).

All Motorola/Symbol devices are designed to be compliant with rules and regulations in locations they
are sold and will be labeled as required.

Local language translations are available at the following website: http://www.motorola.com/enterprisemobility/support.
Any changes or modifications to Motorola/Symbol Technologies equipment, not expressly approved

by Motorola/Symbol Technologies, could void the user’s authority to operate the equipment.

CAUTION:

Only use Motorola/Symbol approved and UL Listed accessories, battery packs and battery chargers.
Do NOT attempt to charge damp/wet mobile computers or batteries. All components must be dry

before connecting to an external power source.

Wireless Device Country Approvals

Regulatory markings, subject to certification, are applied to the device signifying the radio(s) is/are approved for use
in the following countries: United States, Canada, Japan, China, S. Korea, Australia, and Europe 1

Please refer to the Symbol Declaration of Conformity (DoC) for details of other country markings.
This is available at http://www2.symbol.com/doc/.

Note 1: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech Republic, Cyprus, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

Operation of the device without regulatory approval is illegal.

Frequency of Operation – FCC and IC
5 GHz Only

The use in the UNII (Unlicensed National Information Infrastructure) band 1 5150-5250 MHz band is
restricted to Indoor Use Only; any other use will make the operation of this device illegal.

2.4 GHz Only

The available channels for 802.11 b/g operation in the US are Channels 1 to 11. The range of channels is limited by firmware.

2000

Series

Health and Safety Recommendations

Ergonomic Recommendations

Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below. Consult with your
local Health & Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.

• Reduce or eliminate repetitive motion

• Maintain a natural position

• Reduce or eliminate excessive force

• Keep objects that are used

frequently within easy reach

Warnings for Use of Wireless Devices

Please observe all warning notices with regard to the usage of wireless devices

Safety in Hospitals

Wireless devices transmit radio frequency energy and may affect medical electrical equipment.
Wireless devices should be switched off wherever you are requested to do so in hospitals, clinics or health care

facilities. These requests are designed to prevent possible interference with sensitive medical equipment.

Pacemakers

Pacemaker manufacturers recommended that a minimum of 15cm (6 inches) be maintained between a handheld
wireless device and a pacemaker to avoid potential interference with the pacemaker. These recommendations
are consistent with independent research and recommendations by Wireless Technology Research.

Persons with Pacemakers:

• Should ALWAYS keep the device more than 15cm (6 inches) from their pacemaker when turned ON.

• Should not carry the device in a breast pocket.

• Should use the ear furthest from the pacemaker to minimise the potential for interference

• If you have any reason to suspect that interference is taking place, turn OFF your device.

Other Medical Devices

Please consult your physician or the manufacturer of the medical device, to determine if the operation of your
wireless product may interfere with the medical device.

RF Exposure Guidelines

Safety Information
Reducing RF Exposure – Use Properly

Only operate the device in accordance with the instructions supplied.

International

The device complies with internationally recognized standards covering human exposure to electromagnetic
fields from radio devices.

EU
Handheld Devices

To comply with EU RF exposure requirements, this device must be operated in the hand with a minimum
separation distance of 20 cm or more from a person’s body. Other operating configurations should be avoided.

For information on “International” human exposure to electromagnet fields refer to the Motorola/Symbol
Declaration of Conformity (DoC) at http://www2.symbol.com/doc/.

US and Canada
Handheld Devices

To comply with FCC RF exposure requirements, this device must be operated in the hand with a minimum
separation distance of 20 cm or more from a person’s body. Other operating configurations should be avoided.

Motorola, Inc. One Motorola Plaza Holtsville, New York 11742, USA
1-800-927-9626 http://www.motorola.com/enterprisemobility

72-117308-01 Revision A May 2009

SYMBOL MT

• Perform tasks at correct heights

• Reduce or eliminate vibration

• Reduce or eliminate direct pressure

• Provide adjustable workstations

2000

• Provide adequate clearance

• Provide a suitable working

environment

• Improve work procedures

Series

REGULATORY INFORMATION

Batteries

Charging

To charge the device battery, the battery and charger temperatures must be between + 32 º F and + 104 º F (0 º C and + 40 º C).
Please follow the local regulations when disposing of re-chargeable batteries.

Taiwan - Recycling

EPA (Environmental Protection Administration) requires dry battery producing or importing firms in accordance
with Article 15 of the Waste Disposal Act are required to indicate the recycling marks on the batteries used in
sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal.

Battery Information

Motorola/Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry.
However, there are limitations to how long a battery can operate or be stored before needing replacement. Many factors

affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur.

Store batteries at half of full charge in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting
of metallic parts and electrolyte leakage. When storing batteries for one year or longer, the charge level should be
verified at least once a year and charged to half of full charge.

Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Symbol batteries is 30 days, regardless if the battery was purchased separately

or included as part of the mobile computer or bar code scanner. For more information on Symbol batteries,
please visit: http:/mysymbolcare.symbol.com/battery/batbasics1.htm

Battery Safety Guidelines

• The area in which the units are charged should be clear of debris and combustible materials or chemicals.

Particular care should be taken where the device is charged in a non commercial environment.

• Follow battery usage, storage, and charging guidelines found in the user's guide.

• Improper battery use may result in a fire, explosion, or other hazard.

• To charge the mobile device battery, the battery and charger temperatures must be

between +32 º F and +104 º F (0 º C and +40 º C)

• Do not use incompatible batteries and chargers. Use of an incompatible battery or charger may present a risk

of fire, explosion, leakage, or other hazard. If you have any questions about the compatibility of a battery or
a charger, contact Motorola Enterprise Mobility support.

• For devices that utilize a USB port as a charging source, the device shall only be connected to products that

bear the USB-IF logo or have completed the USB-IF compliance program.

• Do not disassemble or open, crush, bend or deform, puncture, or shred.

• Severe impact from dropping any battery-operated device on a hard surface could cause the battery to overheat.

• Do not short circuit a battery or allow metallic or conductive objects to contact the battery terminals.

• Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water

or other liquids, or expose to fire, explosion, or other hazard.

• Do not leave or store the equipment in or near areas that might get very hot, such as in a parked vehicle or

near a radiator or other heat source. Do not place battery into a microwave oven or dryer.

• Battery usage by children should be supervised.

• Please follow local regulations to promptly dispose of used re-chargeable batteries.

• Do not dispose of batteries in fire.

• Seek medical advice immediately if a battery has been swallowed.

• In the event of a battery leak, do not allow the liquid to come in contact with the skin or eyes. If contact has

been made, wash the affected area with large amounts of water and seek medical advice.

• If you suspect damage to your equipment or battery, contact Motorola Enterprise Mobility support to arrange

for inspection.

Radio Frequency Interference Requirements- FCC

a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio

FOR HOME OR OFFICE USE

frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

• Consult the dealer or an experienced radio/TV technician for help.

Radio Transmitters (Part 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for

Radio Frequency Interference Requirements- Canada

This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Radio Transmitters
For RLAN Devices:
The use of 5 GHz RLAN’s, for use in Canada, have the following restrictions:

• Restricted Band 5.60 – 5.65 GHz

This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference
received, including interference that may cause undesired operation.

Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical
specifications were met.

Marking and European Economic Area (EEA)

The use of 2.4GHz RLAN’s, for use through the EEA, have the following restrictions:

• Maximum radiated transmit power of 100 mW EIRP in the frequency range 2.400 -2.4835 GHz.

• France, outside usage is restricted to 2.4 – 2.454 GHz.

• Italy requires a user license for outside usage.

The use of 5GHz RLANs has varying restrictions for use within the EEA; please refer to the Motorola/Symbol
Declaration of Conformity (DoC) for details at http://www2.symbol.com/doc/.

Bluetooth® Wireless Technology for use through the EEA has the following restrictions:

• Maximum radiated transmit power of 100mW EIRP in the frequency range 2.400 -2.4835 GHz

• France, outside usage is restricted to 10mW EIRP

• Italy requires a user license for outside usage.

MOTOROLA and the Stylized M Logo and Symbol and the Symbol logo are registered in the U.S. Patent and Trademark Office.
All other product or service names are the property of their respective owners. © Motorola, Inc. 2009

http://www.motorola.com/mt2070

http://www.motorola.com/mt2090

l

AVOID REACHING

Statement of Compliance

Motorola/Symbol hereby, declares that this device is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC. A Declaration of Conformity may be obtained from http://www2.symbol.com/doc/.

Japan (VCCI) - Voluntary Control Council for Interference

この装置は、情報処理装置等電波障害自主規制協議会（ＶＣＣＩ）の基準に基づくクラスB情報技術装置です。この
装置は、家庭環境で使用することを目的としていますが、この装置がラジオやテレビジョン受信機に近接して使用さ
れると、受信障害を引き起こすことがあります。 取扱説明書に従って正しい取り扱いをして下さい。

This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information
Technology Equipment (VCCI). If this is used near a radio or television receiver in a domestic environment, it may

cause radio interference. Install and use the equipment according to the instruction manual

Other Countries

Brazil

Declarações Regulamentares para MT2090 - Brasil
Nota: "A marca de certificação se aplica ao Transceptor, modelo MT2090. Este equipamento opera em caráter

secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo,
e não pode causar interferência a sistemas operando em caráter primário.”

Para maiores informações sobre ANATEL consulte o site: www.anatel.gov.br

Mexico - Restrict Frequency Range to: 2.450 – 2.4835 GHz.

Sri Lanka - Restrict Frequency Range to: 2.400 – 2.430 GHz.

Taiwan -

臺灣
低功率電波輻射性電機管理辦法
第十二條
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、
加大功率或變更原設計之特性及功能。
第十四條
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，
並改善至無干擾時方得繼續使用。
前項合法通信，指依電信規定作業之無線電通信。
低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
限制頻率範圍是： 2.400 - 2.4835 GHz。 最大發射功率: 27dBm

5.250 - 5.350 GHz。 最大發射功率: 17dBm

5.725 - 5.850 GHz。 最大發射功率: 24dBm

2.4GHz： 11個通道
5GHz： 8個通道
在5.25-5.35 赫頻帶內操作之無線資訊傳輸設備，限於室內使用。

Laser Labels

In accordance with Clause 5. IEC 825 and EN60825, the following information is provided to the user

Laser Devices

Complies with 21CFR1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, June 24, 2007
and IEC 60825-1(ED.2) and EN60825-1:2007.

The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The following statement

is required to comply with US and international regulations:
Caution: Use of controls, adjustments or performance of procedures other than those specified herein may result in

hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such as the sun, the user

should avoid staring directly into the light beam. Momentary exposure to a Class 2 laser is not known to be harmful.

CAUTION- CLASS 2 LASER LIGHT WHEN OPEN. DO NOT
STARE INTO THE BEAM. ATTENTION- LUMIÉRE LASER
EN CAS D'OUVERTURE. NE PAS REGARDER DANS LE FAISCEAU.
VORSICHT- LASERLICHT KLASSE 2, WENN ABDECKUNG GEÖFFNET.
NICHT IN DEN STRAHL BLICKEN.